| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20260125134302.45958-9-clamor95@gmail.com>
Date: Sun, 25 Jan 2026 15:43:00 +0200
From: Svyatoslav Ryhel <clamor95@...il.com>
To: Jonathan Cameron <jic23@...nel.org>,
David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>,
Andy Shevchenko <andy@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Lee Jones <lee@...nel.org>,
Pavel Machek <pavel@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Svyatoslav Ryhel <clamor95@...il.com>,
Dixit Parmar <dixitparmar19@...il.com>,
Tony Lindgren <tony@...mide.com>
Cc: linux-iio@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-input@...r.kernel.org,
linux-leds@...r.kernel.org,
linux-rtc@...r.kernel.org
Subject: [PATCH v1 08/10] dt-bindings: mfg: motorola-cpcap: convert to schema
Convert devicetree bindings for the Motorola CPCAP MFD from TXT to YAML.
Audio codec bindings adjusted with common ports node for port@0 and
port@1. Added compatible for Mot board CPCAP. Other bindings remain the
same.
Signed-off-by: Svyatoslav Ryhel <clamor95@...il.com>
---
.../bindings/mfd/motorola,cpcap.yaml | 389 ++++++++++++++++++
.../bindings/mfd/motorola-cpcap.txt | 78 ----
2 files changed, 389 insertions(+), 78 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
diff --git a/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
new file mode 100644
index 000000000000..f75f884c7b3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
@@ -0,0 +1,389 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/motorola,cpcap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC MFD
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@...il.com>
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - motorola,cpcap
+ - st,6556002
+ - motorola,mapphone-cpcap
+ - motorola,mot-cpcap
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ spi-max-frequency:
+ maximum: 8000000
+
+ spi-cs-high: true
+
+ adc:
+ $ref: /schemas/iio/adc/motorola,cpcap-adc.yaml
+
+ audio-codec:
+ type: object
+
+ properties:
+ interrupts:
+ items:
+ - description: headset detect interrupt
+ - description: microphone bias 2 detect interrupt
+
+ interrupt-names:
+ items:
+ - const: hs
+ - const: mb2
+
+ "#sound-dai-cells":
+ const: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: The audio-codec provides two DAIs. The first one is
+ connected to the Stereo HiFi DAC and the second one is connected
+ to the Voice DAC.
+
+ required:
+ - interrupts
+ - interrupt-names
+ - "#sound-dai-cells"
+
+ battery:
+ $ref: /schemas/power/supply/cpcap-battery.yaml
+
+ charger:
+ $ref: /schemas/power/supply/cpcap-charger.yaml
+
+ key-power:
+ $ref: /schemas/input/motorola,cpcap-pwrbutton.yaml
+
+ phy:
+ $ref: /schemas/phy/motorola,cpcap-usb-phy.yaml
+
+ regulator:
+ $ref: /schemas/regulator/motorola,cpcap-regulator.yaml
+
+ rtc:
+ $ref: /schemas/rtc/motorola,cpcap-rtc.yaml
+
+patternProperties:
+ "^led(-[a-z]+)?$":
+ $ref: /schemas/leds/motorola,cpcap-leds.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/linux-event-codes.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpcap: pmic@0 {
+ compatible = "motorola,cpcap";
+ reg = <0>; /* cs0 */
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi-max-frequency = <3000000>;
+ spi-cs-high;
+
+ cpcap_adc: adc {
+ compatible = "motorola,cpcap-adc";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <8 IRQ_TYPE_NONE>;
+ interrupt-names = "adcdone";
+
+ #io-channel-cells = <1>;
+ };
+
+ cpcap_audio: audio-codec {
+ interrupt-parent = <&cpcap>;
+ interrupts = <9 IRQ_TYPE_NONE>, <10 IRQ_TYPE_NONE>;
+ interrupt-names = "hs", "mb2";
+
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* HiFi */
+ port@0 {
+ reg = <0>;
+ cpcap_audio_codec0: endpoint {
+ };
+ };
+
+ /* Voice */
+ port@1 {
+ reg = <1>;
+ cpcap_audio_codec1: endpoint {
+ };
+ };
+ };
+ };
+
+ cpcap_battery: battery {
+ compatible = "motorola,cpcap-battery";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <6 IRQ_TYPE_NONE>, <5 IRQ_TYPE_NONE>,
+ <3 IRQ_TYPE_NONE>, <20 IRQ_TYPE_NONE>,
+ <54 IRQ_TYPE_NONE>, <57 IRQ_TYPE_NONE>;
+ interrupt-names = "eol", "lowbph", "lowbpl",
+ "chrgcurr1", "battdetb", "cccal";
+
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 5>, <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "chg_isense", "batti";
+ power-supplies = <&cpcap_charger>;
+ };
+
+ cpcap_charger: charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <13 IRQ_TYPE_NONE>, <12 IRQ_TYPE_NONE>,
+ <29 IRQ_TYPE_NONE>, <28 IRQ_TYPE_NONE>,
+ <22 IRQ_TYPE_NONE>, <21 IRQ_TYPE_NONE>,
+ <20 IRQ_TYPE_NONE>, <19 IRQ_TYPE_NONE>,
+ <54 IRQ_TYPE_NONE>;
+ interrupt-names = "chrg_det", "rvrs_chrg", "chrg_se1b",
+ "se0conn", "rvrs_mode", "chrgcurr2",
+ "chrgcurr1", "vbusvld", "battdetb";
+
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+ <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 2>, <&cpcap_adc 5>,
+ <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+ };
+
+ key-power {
+ compatible = "motorola,cpcap-pwrbutton";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <23 IRQ_TYPE_NONE>;
+ };
+
+ led-red {
+ compatible = "motorola,cpcap-led-red";
+ vdd-supply = <&vdd_led>;
+ label = "status-led::red";
+ };
+
+ led-green {
+ compatible = "motorola,cpcap-led-green";
+ vdd-supply = <&vdd_led>;
+ label = "status-led::green";
+ };
+
+ led-blue {
+ compatible = "motorola,cpcap-led-blue";
+ vdd-supply = <&vdd_led>;
+ label = "status-led::blue";
+ };
+
+ cpcap_usb2_phy: phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+
+ pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ #phy-cells = <0>;
+
+ interrupts-extended =
+ <&cpcap 15 IRQ_TYPE_NONE>, <&cpcap 14 IRQ_TYPE_NONE>,
+ <&cpcap 28 IRQ_TYPE_NONE>, <&cpcap 19 IRQ_TYPE_NONE>,
+ <&cpcap 18 IRQ_TYPE_NONE>, <&cpcap 17 IRQ_TYPE_NONE>,
+ <&cpcap 16 IRQ_TYPE_NONE>, <&cpcap 49 IRQ_TYPE_NONE>,
+ <&cpcap 48 IRQ_TYPE_NONE>;
+ interrupt-names = "id_ground", "id_float", "se0conn",
+ "vbusvld", "sessvld", "sessend",
+ "se1", "dm", "dp";
+
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,
+ <&gpio1 0 GPIO_ACTIVE_HIGH>;
+
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+
+ vusb-supply = <&avdd_usb>;
+ };
+
+ regulator {
+ compatible = "motorola,cpcap-regulator";
+
+ regulators {
+ vdd_cpu: SW1 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_core: SW2 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_vio: SW3 {
+ regulator-name = "vdd_1v8_vio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_aon: SW4 {
+ regulator-name = "vdd_aon";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_led: SW5 {
+ regulator-name = "vdd_led";
+ regulator-min-microvolt = <5050000>;
+ regulator-max-microvolt = <5050000>;
+ regulator-enable-ramp-delay = <1500>;
+ regulator-boot-on;
+ };
+
+ vdd_hvio: VHVIO {
+ regulator-name = "vdd_hvio";
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ vcore_emmc: VSDIO {
+ regulator-name = "vcore_emmc";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ avdd_dsi_csi: VCSI {
+ regulator-name = "avdd_dsi_csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-boot-on;
+ };
+
+ avdd_3v3_periph: VWLAN2 {
+ regulator-name = "avdd_3v3_periph";
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-boot-on;
+ };
+
+ vddio_usd: VSIMCARD {
+ regulator-name = "vddio_usd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-boot-on;
+ };
+
+ vdd_haptic: VVIB {
+ regulator-name = "vdd_haptic";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ avdd_usb: VUSB {
+ regulator-name = "avdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ VAUDIO {
+ regulator-name = "vdd_audio";
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-enable-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ cpcap_rtc: rtc {
+ compatible = "motorola,cpcap-rtc";
+
+ interrupt-parent = <&cpcap>;
+ interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
deleted file mode 100644
index 18c3fc26ca93..000000000000
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Motorola CPCAP PMIC device tree binding
-
-Required properties:
-- compatible : One or both of "motorola,cpcap" or "ste,6556002"
-- reg : SPI chip select
-- interrupts : The interrupt line the device is connected to
-- interrupt-controller : Marks the device node as an interrupt controller
-- #interrupt-cells : The number of cells to describe an IRQ, should be 2
-- #address-cells : Child device offset number of cells, should be 1
-- #size-cells : Child device size number of cells, should be 0
-- spi-max-frequency : Typically set to 3000000
-- spi-cs-high : SPI chip select direction
-
-Optional subnodes:
-
-The sub-functions of CPCAP get their own node with their own compatible values,
-which are described in the following files:
-
-- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
-- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
-- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
-- Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
-- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
-- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
-- Documentation/devicetree/bindings/leds/leds-cpcap.txt
-- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
-
-The only exception is the audio codec. Instead of a compatible value its
-node must be named "audio-codec".
-
-Required properties for the audio-codec subnode:
-
-- #sound-dai-cells = <1>;
-- interrupts : should contain jack detection interrupts, with headset
- detect interrupt matching "hs" and microphone bias 2
- detect interrupt matching "mb2" in interrupt-names.
-- interrupt-names : Contains "hs", "mb2"
-
-The audio-codec provides two DAIs. The first one is connected to the
-Stereo HiFi DAC and the second one is connected to the Voice DAC.
-
-Example:
-
-&mcspi1 {
- cpcap: pmic@0 {
- compatible = "motorola,cpcap", "ste,6556002";
- reg = <0>; /* cs0 */
- interrupt-parent = <&gpio1>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <3000000>;
- spi-cs-high;
-
- audio-codec {
- #sound-dai-cells = <1>;
- interrupts-extended = <&cpcap 9 0>, <&cpcap 10 0>;
- interrupt-names = "hs", "mb2";
-
- /* HiFi */
- port@0 {
- endpoint {
- remote-endpoint = <&cpu_dai1>;
- };
- };
-
- /* Voice */
- port@1 {
- endpoint {
- remote-endpoint = <&cpu_dai2>;
- };
- };
- };
- };
-};
-
--
2.51.0
Powered by blists - more mailing lists