[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <136bf12f-cead-4485-b689-af780c937e2d@oss.qualcomm.com>
Date: Mon, 26 Jan 2026 11:00:25 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
Vikash Garodia <vikash.garodia@....qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@....qualcomm.com>,
Bryan O'Donoghue <bod@...nel.org>,
Mauro Carvalho Chehab
<mchehab@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Abhinav Kumar <abhinav.kumar@...ux.dev>,
Bjorn Andersson <andersson@...nel.org>,
David Heidelberg <david@...t.cz>
Cc: linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Subject: Re: [PATCH v3 4/7] arm64: dts: qcom: sc8280xp: Add Venus
On 1/25/26 4:33 PM, Dmitry Baryshkov wrote:
> From: Konrad Dybcio <konradybcio@...nel.org>
>
> Add the required nodes to enable Venus on sc8280xp.
>
> [ bod: added interconnect tags ]
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> [ johan: use sm8350 videocc defines ]
> Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
> [ bod: dropped video encoder/decoder declarations ]
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
> [ db: dropped llcc icc, switched to sc8280xp compat, added more freqs ]
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
> ---
[...]
> + venus_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-720000000 {
> + opp-hz = /bits/ 64 <720000000>;
You need to div3 all of these, otherwise this LOW_SVS OPP
will actually apply a more-than-TURBO_L1-requiring frequency..
[...]
> + videocc: clock-controller@...0000 {
> + compatible = "qcom,sc8280xp-videocc";
> + reg = <0 0x0abf0000 0 0x10000>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&rpmhcc RPMH_CXO_CLK_A>,
> + <&sleep_clk>;
> + power-domains = <&rpmhpd SC8280XP_MMCX>;
> + required-opps = <&rpmhpd_opp_low_svs>;
AFAICS the PLLs will not turn on if *MX* is at < LOWSVS, but they still
need to be scaled 1:1 with MMCX as the freuqency rises, so you need to
wire up 2 power domains to the OPP table
PLL0 supplies core0 (iris) and PLL1 supplies core1 (CVP)
Konrad
Powered by blists - more mailing lists