| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260126-register-v3-6-2328a59d7312@nvidia.com>
Date: Mon, 26 Jan 2026 22:28:45 +0900
From: Alexandre Courbot <acourbot@...dia.com>
To: Danilo Krummrich <dakr@...nel.org>, Alice Ryhl <aliceryhl@...gle.com>,
Daniel Almeida <daniel.almeida@...labora.com>,
Miguel Ojeda <ojeda@...nel.org>, Boqun Feng <boqun.feng@...il.com>,
Gary Guo <gary@...yguo.net>,
Björn Roy Baron <bjorn3_gh@...tonmail.com>,
Benno Lossin <lossin@...nel.org>, Andreas Hindborg <a.hindborg@...nel.org>,
Trevor Gross <tmgross@...ch.edu>
Cc: Yury Norov <yury.norov@...il.com>, John Hubbard <jhubbard@...dia.com>,
Alistair Popple <apopple@...dia.com>,
Joel Fernandes <joelagnelf@...dia.com>, Timur Tabi <ttabi@...dia.com>,
Edwin Peer <epeer@...dia.com>, Eliot Courtney <ecourtney@...dia.com>,
Dirk Behme <dirk.behme@...bosch.com>, Steven Price <steven.price@....com>,
rust-for-linux@...r.kernel.org, linux-kernel@...r.kernel.org,
Alexandre Courbot <acourbot@...dia.com>
Subject: [PATCH FOR REFERENCE v3 6/6] gpu: nova-core: use the kernel
`register!` macro
Replace the nova-core internal `register!` macro by the one defined in
the `kernel` crate and remove our own private implementations.
Tested-by: Dirk Behme <dirk.behme@...bosch.com>
Signed-off-by: Alexandre Courbot <acourbot@...dia.com>
---
drivers/gpu/nova-core/falcon.rs | 175 +++----
drivers/gpu/nova-core/falcon/gsp.rs | 12 +-
drivers/gpu/nova-core/falcon/hal/ga102.rs | 15 +-
drivers/gpu/nova-core/falcon/sec2.rs | 13 +-
drivers/gpu/nova-core/fb/hal/ga100.rs | 13 +-
drivers/gpu/nova-core/fb/hal/tu102.rs | 2 +-
drivers/gpu/nova-core/gpu.rs | 31 +-
drivers/gpu/nova-core/gsp/cmdq.rs | 4 +-
drivers/gpu/nova-core/regs.rs | 494 +++++++++++---------
drivers/gpu/nova-core/regs/macros.rs | 739 ------------------------------
10 files changed, 393 insertions(+), 1105 deletions(-)
diff --git a/drivers/gpu/nova-core/falcon.rs b/drivers/gpu/nova-core/falcon.rs
index 82c661aef594..1b9283018c13 100644
--- a/drivers/gpu/nova-core/falcon.rs
+++ b/drivers/gpu/nova-core/falcon.rs
@@ -9,7 +9,11 @@
use kernel::{
device,
dma::DmaAddress,
- io::poll::read_poll_timeout,
+ io::{
+ poll::read_poll_timeout,
+ register::RegisterBase, //
+ },
+ num::Bounded,
prelude::*,
sync::aref::ARef,
time::{
@@ -27,7 +31,6 @@
IntoSafeCast, //
},
regs,
- regs::macros::RegisterBase, //
};
pub(crate) mod gsp;
@@ -35,11 +38,11 @@
pub(crate) mod sec2;
// TODO[FPRI]: Replace with `ToPrimitive`.
-macro_rules! impl_from_enum_to_u8 {
- ($enum_type:ty) => {
- impl From<$enum_type> for u8 {
+macro_rules! impl_from_enum_to_bounded {
+ ($enum_type:ty, $length:literal) => {
+ impl From<$enum_type> for Bounded<u32, $length> {
fn from(value: $enum_type) -> Self {
- value as u8
+ Bounded::from_expr(value as u32)
}
}
};
@@ -47,10 +50,8 @@ fn from(value: $enum_type) -> Self {
/// Revision number of a falcon core, used in the [`crate::regs::NV_PFALCON_FALCON_HWCFG1`]
/// register.
-#[repr(u8)]
-#[derive(Debug, Default, Copy, Clone, PartialEq, Eq, PartialOrd, Ord)]
+#[derive(Debug, Copy, Clone, PartialEq, Eq, PartialOrd, Ord)]
pub(crate) enum FalconCoreRev {
- #[default]
Rev1 = 1,
Rev2 = 2,
Rev3 = 3,
@@ -59,16 +60,16 @@ pub(crate) enum FalconCoreRev {
Rev6 = 6,
Rev7 = 7,
}
-impl_from_enum_to_u8!(FalconCoreRev);
+impl_from_enum_to_bounded!(FalconCoreRev, 4);
// TODO[FPRI]: replace with `FromPrimitive`.
-impl TryFrom<u8> for FalconCoreRev {
+impl TryFrom<Bounded<u32, 4>> for FalconCoreRev {
type Error = Error;
- fn try_from(value: u8) -> Result<Self> {
+ fn try_from(value: Bounded<u32, 4>) -> Result<Self> {
use FalconCoreRev::*;
- let rev = match value {
+ let rev = match value.get() {
1 => Rev1,
2 => Rev2,
3 => Rev3,
@@ -85,46 +86,38 @@ fn try_from(value: u8) -> Result<Self> {
/// Revision subversion number of a falcon core, used in the
/// [`crate::regs::NV_PFALCON_FALCON_HWCFG1`] register.
-#[repr(u8)]
-#[derive(Debug, Default, Copy, Clone, PartialEq, Eq, PartialOrd, Ord)]
+#[derive(Debug, Copy, Clone, PartialEq, Eq, PartialOrd, Ord)]
pub(crate) enum FalconCoreRevSubversion {
- #[default]
Subversion0 = 0,
Subversion1 = 1,
Subversion2 = 2,
Subversion3 = 3,
}
-impl_from_enum_to_u8!(FalconCoreRevSubversion);
+impl_from_enum_to_bounded!(FalconCoreRevSubversion, 2);
// TODO[FPRI]: replace with `FromPrimitive`.
-impl TryFrom<u8> for FalconCoreRevSubversion {
- type Error = Error;
-
- fn try_from(value: u8) -> Result<Self> {
+impl From<Bounded<u32, 2>> for FalconCoreRevSubversion {
+ fn from(value: Bounded<u32, 2>) -> Self {
use FalconCoreRevSubversion::*;
- let sub_version = match value & 0b11 {
+ match value.get() {
0 => Subversion0,
1 => Subversion1,
2 => Subversion2,
3 => Subversion3,
- _ => return Err(EINVAL),
- };
-
- Ok(sub_version)
+ // SAFETY: `value` comes from a 2-bit `Bounded`, and we just checked all possible
+ // values.
+ _ => unsafe { core::hint::unreachable_unchecked() },
+ }
}
}
-/// Security model of a falcon core, used in the [`crate::regs::NV_PFALCON_FALCON_HWCFG1`]
-/// register.
-#[repr(u8)]
-#[derive(Debug, Default, Copy, Clone)]
/// Security mode of the Falcon microprocessor.
///
/// See `falcon.rst` for more details.
+#[derive(Debug, Copy, Clone)]
pub(crate) enum FalconSecurityModel {
/// Non-Secure: runs unsigned code without privileges.
- #[default]
None = 0,
/// Light-Secured (LS): Runs signed code with some privileges.
/// Entry into this mode is only possible from 'Heavy-secure' mode, which verifies the code's
@@ -138,16 +131,16 @@ pub(crate) enum FalconSecurityModel {
/// Also known as High-Secure, Privilege Level 3 or PL3.
Heavy = 3,
}
-impl_from_enum_to_u8!(FalconSecurityModel);
+impl_from_enum_to_bounded!(FalconSecurityModel, 2);
// TODO[FPRI]: replace with `FromPrimitive`.
-impl TryFrom<u8> for FalconSecurityModel {
+impl TryFrom<Bounded<u32, 2>> for FalconSecurityModel {
type Error = Error;
- fn try_from(value: u8) -> Result<Self> {
+ fn try_from(value: Bounded<u32, 2>) -> Result<Self> {
use FalconSecurityModel::*;
- let sec_model = match value {
+ let sec_model = match value.get() {
0 => None,
2 => Light,
3 => Heavy,
@@ -160,24 +153,22 @@ fn try_from(value: u8) -> Result<Self> {
/// Signing algorithm for a given firmware, used in the [`crate::regs::NV_PFALCON2_FALCON_MOD_SEL`]
/// register. It is passed to the Falcon Boot ROM (BROM) as a parameter.
-#[repr(u8)]
-#[derive(Debug, Default, Copy, Clone, PartialEq, Eq)]
+#[derive(Debug, Copy, Clone, PartialEq, Eq)]
pub(crate) enum FalconModSelAlgo {
/// AES.
- #[expect(dead_code)]
Aes = 0,
/// RSA3K.
- #[default]
Rsa3k = 1,
}
-impl_from_enum_to_u8!(FalconModSelAlgo);
+impl_from_enum_to_bounded!(FalconModSelAlgo, 8);
// TODO[FPRI]: replace with `FromPrimitive`.
-impl TryFrom<u8> for FalconModSelAlgo {
+impl TryFrom<Bounded<u32, 8>> for FalconModSelAlgo {
type Error = Error;
- fn try_from(value: u8) -> Result<Self> {
- match value {
+ fn try_from(value: Bounded<u32, 8>) -> Result<Self> {
+ match value.get() {
+ 0 => Ok(FalconModSelAlgo::Aes),
1 => Ok(FalconModSelAlgo::Rsa3k),
_ => Err(EINVAL),
}
@@ -185,21 +176,19 @@ fn try_from(value: u8) -> Result<Self> {
}
/// Valid values for the `size` field of the [`crate::regs::NV_PFALCON_FALCON_DMATRFCMD`] register.
-#[repr(u8)]
-#[derive(Debug, Default, Copy, Clone, PartialEq, Eq)]
+#[derive(Debug, Copy, Clone, PartialEq, Eq)]
pub(crate) enum DmaTrfCmdSize {
/// 256 bytes transfer.
- #[default]
Size256B = 0x6,
}
-impl_from_enum_to_u8!(DmaTrfCmdSize);
+impl_from_enum_to_bounded!(DmaTrfCmdSize, 3);
// TODO[FPRI]: replace with `FromPrimitive`.
-impl TryFrom<u8> for DmaTrfCmdSize {
+impl TryFrom<Bounded<u32, 3>> for DmaTrfCmdSize {
type Error = Error;
- fn try_from(value: u8) -> Result<Self> {
- match value {
+ fn try_from(value: Bounded<u32, 3>) -> Result<Self> {
+ match value.get() {
0x6 => Ok(Self::Size256B),
_ => Err(EINVAL),
}
@@ -207,33 +196,24 @@ fn try_from(value: u8) -> Result<Self> {
}
/// Currently active core on a dual falcon/riscv (Peregrine) controller.
-#[derive(Debug, Clone, Copy, PartialEq, Eq, Default)]
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub(crate) enum PeregrineCoreSelect {
/// Falcon core is active.
- #[default]
Falcon = 0,
/// RISC-V core is active.
Riscv = 1,
}
+impl_from_enum_to_bounded!(PeregrineCoreSelect, 1);
-impl From<bool> for PeregrineCoreSelect {
- fn from(value: bool) -> Self {
- match value {
+impl From<Bounded<u32, 1>> for PeregrineCoreSelect {
+ fn from(value: Bounded<u32, 1>) -> Self {
+ match bool::from(value) {
false => PeregrineCoreSelect::Falcon,
true => PeregrineCoreSelect::Riscv,
}
}
}
-impl From<PeregrineCoreSelect> for bool {
- fn from(value: PeregrineCoreSelect) -> Self {
- match value {
- PeregrineCoreSelect::Falcon => false,
- PeregrineCoreSelect::Riscv => true,
- }
- }
-}
-
/// Different types of memory present in a falcon core.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub(crate) enum FalconMem {
@@ -246,10 +226,8 @@ pub(crate) enum FalconMem {
/// Defines the Framebuffer Interface (FBIF) aperture type.
/// This determines the memory type for external memory access during a DMA transfer, which is
/// performed by the Falcon's Framebuffer DMA (FBDMA) engine. See falcon.rst for more details.
-#[derive(Debug, Clone, Default)]
+#[derive(Debug, Clone)]
pub(crate) enum FalconFbifTarget {
- /// VRAM.
- #[default]
/// Local Framebuffer (GPU's VRAM memory).
LocalFb = 0,
/// Coherent system memory (System DRAM).
@@ -257,14 +235,14 @@ pub(crate) enum FalconFbifTarget {
/// Non-coherent system memory (System DRAM).
NoncoherentSysmem = 2,
}
-impl_from_enum_to_u8!(FalconFbifTarget);
+impl_from_enum_to_bounded!(FalconFbifTarget, 2);
// TODO[FPRI]: replace with `FromPrimitive`.
-impl TryFrom<u8> for FalconFbifTarget {
+impl TryFrom<Bounded<u32, 2>> for FalconFbifTarget {
type Error = Error;
- fn try_from(value: u8) -> Result<Self> {
- let res = match value {
+ fn try_from(value: Bounded<u32, 2>) -> Result<Self> {
+ let res = match value.get() {
0 => Self::LocalFb,
1 => Self::CoherentSysmem,
2 => Self::NoncoherentSysmem,
@@ -276,34 +254,25 @@ fn try_from(value: u8) -> Result<Self> {
}
/// Type of memory addresses to use.
-#[derive(Debug, Clone, Default)]
+#[derive(Debug, Clone)]
pub(crate) enum FalconFbifMemType {
/// Virtual memory addresses.
- #[default]
Virtual = 0,
/// Physical memory addresses.
Physical = 1,
}
+impl_from_enum_to_bounded!(FalconFbifMemType, 1);
/// Conversion from a single-bit register field.
-impl From<bool> for FalconFbifMemType {
- fn from(value: bool) -> Self {
- match value {
+impl From<Bounded<u32, 1>> for FalconFbifMemType {
+ fn from(value: Bounded<u32, 1>) -> Self {
+ match bool::from(value) {
false => Self::Virtual,
true => Self::Physical,
}
}
}
-impl From<FalconFbifMemType> for bool {
- fn from(value: FalconFbifMemType) -> Self {
- match value {
- FalconFbifMemType::Virtual => false,
- FalconFbifMemType::Physical => true,
- }
- }
-}
-
/// Type used to represent the `PFALCON` registers address base for a given falcon engine.
pub(crate) struct PFalconBase(());
@@ -385,7 +354,7 @@ pub(crate) fn new(dev: &device::Device, chipset: Chipset) -> Result<Self> {
/// Resets DMA-related registers.
pub(crate) fn dma_reset(&self, bar: &Bar0) {
regs::NV_PFALCON_FBIF_CTL::update(bar, &E::ID, |v| v.set_allow_phys_no_ctx(true));
- regs::NV_PFALCON_FALCON_DMACTL::default().write(bar, &E::ID);
+ regs::NV_PFALCON_FALCON_DMACTL::zeroed().write(bar, &E::ID);
}
/// Wait for memory scrubbing to complete.
@@ -431,8 +400,8 @@ pub(crate) fn reset(&self, bar: &Bar0) -> Result {
self.hal.select_core(self, bar)?;
self.reset_wait_mem_scrubbing(bar)?;
- regs::NV_PFALCON_FALCON_RM::default()
- .set_value(regs::NV_PMC_BOOT_0::read(bar).into())
+ regs::NV_PFALCON_FALCON_RM::zeroed()
+ .set_value(regs::NV_PMC_BOOT_0::read(bar).as_raw())
.write(bar, &E::ID);
Ok(())
@@ -495,28 +464,26 @@ fn dma_wr<F: FalconFirmware<Target = E>>(
// Set up the base source DMA address.
- regs::NV_PFALCON_FALCON_DMATRFBASE::default()
+ regs::NV_PFALCON_FALCON_DMATRFBASE::zeroed()
// CAST: `as u32` is used on purpose since we do want to strip the upper bits, which
// will be written to `NV_PFALCON_FALCON_DMATRFBASE1`.
.set_base((dma_start >> 8) as u32)
.write(bar, &E::ID);
- regs::NV_PFALCON_FALCON_DMATRFBASE1::default()
- // CAST: `as u16` is used on purpose since the remaining bits are guaranteed to fit
- // within a `u16`.
- .set_base((dma_start >> 40) as u16)
+ regs::NV_PFALCON_FALCON_DMATRFBASE1::zeroed()
+ .try_set_base(dma_start >> 40)?
.write(bar, &E::ID);
- let cmd = regs::NV_PFALCON_FALCON_DMATRFCMD::default()
+ let cmd = regs::NV_PFALCON_FALCON_DMATRFCMD::zeroed()
.set_size(DmaTrfCmdSize::Size256B)
.set_imem(target_mem == FalconMem::Imem)
- .set_sec(if sec { 1 } else { 0 });
+ .set_sec(sec);
for pos in (0..num_transfers).map(|i| i * DMA_LEN) {
// Perform a transfer of size `DMA_LEN`.
- regs::NV_PFALCON_FALCON_DMATRFMOFFS::default()
- .set_offs(load_offsets.dst_start + pos)
+ regs::NV_PFALCON_FALCON_DMATRFMOFFS::zeroed()
+ .try_set_offs(load_offsets.dst_start + pos)?
.write(bar, &E::ID);
- regs::NV_PFALCON_FALCON_DMATRFFBOFFS::default()
+ regs::NV_PFALCON_FALCON_DMATRFFBOFFS::zeroed()
.set_offs(src_start + pos)
.write(bar, &E::ID);
cmd.write(bar, &E::ID);
@@ -549,7 +516,7 @@ pub(crate) fn dma_load<F: FalconFirmware<Target = E>>(&self, bar: &Bar0, fw: &F)
self.hal.program_brom(self, bar, &fw.brom_params())?;
// Set `BootVec` to start of non-secure code.
- regs::NV_PFALCON_FALCON_BOOTVEC::default()
+ regs::NV_PFALCON_FALCON_BOOTVEC::zeroed()
.set_value(fw.boot_addr())
.write(bar, &E::ID);
@@ -572,10 +539,10 @@ pub(crate) fn wait_till_halted(&self, bar: &Bar0) -> Result<()> {
/// Start the falcon CPU.
pub(crate) fn start(&self, bar: &Bar0) -> Result<()> {
match regs::NV_PFALCON_FALCON_CPUCTL::read(bar, &E::ID).alias_en() {
- true => regs::NV_PFALCON_FALCON_CPUCTL_ALIAS::default()
+ true => regs::NV_PFALCON_FALCON_CPUCTL_ALIAS::zeroed()
.set_startcpu(true)
.write(bar, &E::ID),
- false => regs::NV_PFALCON_FALCON_CPUCTL::default()
+ false => regs::NV_PFALCON_FALCON_CPUCTL::zeroed()
.set_startcpu(true)
.write(bar, &E::ID),
}
@@ -586,13 +553,13 @@ pub(crate) fn start(&self, bar: &Bar0) -> Result<()> {
/// Writes values to the mailbox registers if provided.
pub(crate) fn write_mailboxes(&self, bar: &Bar0, mbox0: Option<u32>, mbox1: Option<u32>) {
if let Some(mbox0) = mbox0 {
- regs::NV_PFALCON_FALCON_MAILBOX0::default()
+ regs::NV_PFALCON_FALCON_MAILBOX0::zeroed()
.set_value(mbox0)
.write(bar, &E::ID);
}
if let Some(mbox1) = mbox1 {
- regs::NV_PFALCON_FALCON_MAILBOX1::default()
+ regs::NV_PFALCON_FALCON_MAILBOX1::zeroed()
.set_value(mbox1)
.write(bar, &E::ID);
}
@@ -657,7 +624,7 @@ pub(crate) fn is_riscv_active(&self, bar: &Bar0) -> bool {
/// Write the application version to the OS register.
pub(crate) fn write_os_version(&self, bar: &Bar0, app_version: u32) {
- regs::NV_PFALCON_FALCON_OS::default()
+ regs::NV_PFALCON_FALCON_OS::zeroed()
.set_value(app_version)
.write(bar, &E::ID);
}
diff --git a/drivers/gpu/nova-core/falcon/gsp.rs b/drivers/gpu/nova-core/falcon/gsp.rs
index 67edef3636c1..32b28e22c741 100644
--- a/drivers/gpu/nova-core/falcon/gsp.rs
+++ b/drivers/gpu/nova-core/falcon/gsp.rs
@@ -1,7 +1,10 @@
// SPDX-License-Identifier: GPL-2.0
use kernel::{
- io::poll::read_poll_timeout,
+ io::{
+ poll::read_poll_timeout,
+ register::RegisterBase, //
+ },
prelude::*,
time::Delta, //
};
@@ -14,10 +17,7 @@
PFalcon2Base,
PFalconBase, //
},
- regs::{
- self,
- macros::RegisterBase, //
- },
+ regs,
};
/// Type specifying the `Gsp` falcon engine. Cannot be instantiated.
@@ -39,7 +39,7 @@ impl Falcon<Gsp> {
/// Clears the SWGEN0 bit in the Falcon's IRQ status clear register to
/// allow GSP to signal CPU for processing new messages in message queue.
pub(crate) fn clear_swgen0_intr(&self, bar: &Bar0) {
- regs::NV_PFALCON_FALCON_IRQSCLR::default()
+ regs::NV_PFALCON_FALCON_IRQSCLR::zeroed()
.set_swgen0(true)
.write(bar, &Gsp::ID);
}
diff --git a/drivers/gpu/nova-core/falcon/hal/ga102.rs b/drivers/gpu/nova-core/falcon/hal/ga102.rs
index 69a7a95cac16..c567d7d81f2a 100644
--- a/drivers/gpu/nova-core/falcon/hal/ga102.rs
+++ b/drivers/gpu/nova-core/falcon/hal/ga102.rs
@@ -26,7 +26,7 @@
fn select_core_ga102<E: FalconEngine>(bar: &Bar0) -> Result {
let bcr_ctrl = regs::NV_PRISCV_RISCV_BCR_CTRL::read(bar, &E::ID);
if bcr_ctrl.core_select() != PeregrineCoreSelect::Falcon {
- regs::NV_PRISCV_RISCV_BCR_CTRL::default()
+ regs::NV_PRISCV_RISCV_BCR_CTRL::zeroed()
.set_core_select(PeregrineCoreSelect::Falcon)
.write(bar, &E::ID);
@@ -59,7 +59,7 @@ fn signature_reg_fuse_version_ga102(
// `ucode_idx` is guaranteed to be in the range [0..15], making the `read` calls provable valid
// at build-time.
- let reg_fuse_version = if engine_id_mask & 0x0001 != 0 {
+ let reg_fuse_version: u16 = if engine_id_mask & 0x0001 != 0 {
regs::NV_FUSE_OPT_FPF_SEC2_UCODE1_VERSION::read(bar, ucode_idx).data()
} else if engine_id_mask & 0x0004 != 0 {
regs::NV_FUSE_OPT_FPF_NVDEC_UCODE1_VERSION::read(bar, ucode_idx).data()
@@ -68,23 +68,24 @@ fn signature_reg_fuse_version_ga102(
} else {
dev_err!(dev, "unexpected engine_id_mask {:#x}", engine_id_mask);
return Err(EINVAL);
- };
+ }
+ .into();
// TODO[NUMM]: replace with `last_set_bit` once it lands.
Ok(u16::BITS - reg_fuse_version.leading_zeros())
}
fn program_brom_ga102<E: FalconEngine>(bar: &Bar0, params: &FalconBromParams) -> Result {
- regs::NV_PFALCON2_FALCON_BROM_PARAADDR::default()
+ regs::NV_PFALCON2_FALCON_BROM_PARAADDR::zeroed()
.set_value(params.pkc_data_offset)
.write(bar, &E::ID, 0);
- regs::NV_PFALCON2_FALCON_BROM_ENGIDMASK::default()
+ regs::NV_PFALCON2_FALCON_BROM_ENGIDMASK::zeroed()
.set_value(u32::from(params.engine_id_mask))
.write(bar, &E::ID);
- regs::NV_PFALCON2_FALCON_BROM_CURR_UCODE_ID::default()
+ regs::NV_PFALCON2_FALCON_BROM_CURR_UCODE_ID::zeroed()
.set_ucode_id(params.ucode_id)
.write(bar, &E::ID);
- regs::NV_PFALCON2_FALCON_MOD_SEL::default()
+ regs::NV_PFALCON2_FALCON_MOD_SEL::zeroed()
.set_algo(FalconModSelAlgo::Rsa3k)
.write(bar, &E::ID);
diff --git a/drivers/gpu/nova-core/falcon/sec2.rs b/drivers/gpu/nova-core/falcon/sec2.rs
index b57d362e576a..5d836e2d17dd 100644
--- a/drivers/gpu/nova-core/falcon/sec2.rs
+++ b/drivers/gpu/nova-core/falcon/sec2.rs
@@ -1,12 +1,11 @@
// SPDX-License-Identifier: GPL-2.0
-use crate::{
- falcon::{
- FalconEngine,
- PFalcon2Base,
- PFalconBase, //
- },
- regs::macros::RegisterBase,
+use kernel::io::register::RegisterBase;
+
+use crate::falcon::{
+ FalconEngine,
+ PFalcon2Base,
+ PFalconBase, //
};
/// Type specifying the `Sec2` falcon engine. Cannot be instantiated.
diff --git a/drivers/gpu/nova-core/fb/hal/ga100.rs b/drivers/gpu/nova-core/fb/hal/ga100.rs
index e0acc41aa7cd..655eac3a1dfd 100644
--- a/drivers/gpu/nova-core/fb/hal/ga100.rs
+++ b/drivers/gpu/nova-core/fb/hal/ga100.rs
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
-use kernel::prelude::*;
+use kernel::{
+ num::Bounded,
+ prelude::*, //
+};
use crate::{
driver::Bar0,
@@ -19,12 +22,10 @@ pub(super) fn read_sysmem_flush_page_ga100(bar: &Bar0) -> u64 {
}
pub(super) fn write_sysmem_flush_page_ga100(bar: &Bar0, addr: u64) {
- regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI::default()
- // CAST: `as u32` is used on purpose since the remaining bits are guaranteed to fit within
- // a `u32`.
- .set_adr_63_40((addr >> FLUSH_SYSMEM_ADDR_SHIFT_HI) as u32)
+ regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI::zeroed()
+ .set_adr_63_40(Bounded::from_expr(addr >> FLUSH_SYSMEM_ADDR_SHIFT_HI).cast())
.write(bar);
- regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR::default()
+ regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR::zeroed()
// CAST: `as u32` is used on purpose since we want to strip the upper bits that have been
// written to `NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI`.
.set_adr_39_08((addr >> FLUSH_SYSMEM_ADDR_SHIFT) as u32)
diff --git a/drivers/gpu/nova-core/fb/hal/tu102.rs b/drivers/gpu/nova-core/fb/hal/tu102.rs
index eec984f4e816..37da571e9962 100644
--- a/drivers/gpu/nova-core/fb/hal/tu102.rs
+++ b/drivers/gpu/nova-core/fb/hal/tu102.rs
@@ -21,7 +21,7 @@ pub(super) fn write_sysmem_flush_page_gm107(bar: &Bar0, addr: u64) -> Result {
u32::try_from(addr >> FLUSH_SYSMEM_ADDR_SHIFT)
.map_err(|_| EINVAL)
.map(|addr| {
- regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR::default()
+ regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR::zeroed()
.set_adr_39_08(addr)
.write(bar)
})
diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index 629c9d2dc994..e42b1aec95b4 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -4,6 +4,7 @@
device,
devres::Devres,
fmt,
+ num::Bounded,
pci,
prelude::*,
sync::Arc, //
@@ -122,24 +123,19 @@ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
}
/// Enum representation of the GPU generation.
-///
-/// TODO: remove the `Default` trait implementation, and the `#[default]`
-/// attribute, once the register!() macro (which creates Architecture items) no
-/// longer requires it for read-only fields.
-#[derive(fmt::Debug, Default, Copy, Clone)]
+#[derive(fmt::Debug, Copy, Clone)]
#[repr(u8)]
pub(crate) enum Architecture {
- #[default]
Turing = 0x16,
Ampere = 0x17,
Ada = 0x19,
}
-impl TryFrom<u8> for Architecture {
+impl TryFrom<Bounded<u32, 6>> for Architecture {
type Error = Error;
- fn try_from(value: u8) -> Result<Self> {
- match value {
+ fn try_from(value: Bounded<u32, 6>) -> Result<Self> {
+ match u8::from(value) {
0x16 => Ok(Self::Turing),
0x17 => Ok(Self::Ampere),
0x19 => Ok(Self::Ada),
@@ -148,23 +144,26 @@ fn try_from(value: u8) -> Result<Self> {
}
}
-impl From<Architecture> for u8 {
+impl From<Architecture> for Bounded<u32, 6> {
fn from(value: Architecture) -> Self {
- // CAST: `Architecture` is `repr(u8)`, so this cast is always lossless.
- value as u8
+ match value {
+ Architecture::Turing => Bounded::<u8, 6>::new::<0x16>().cast(),
+ Architecture::Ampere => Bounded::<u8, 6>::new::<0x17>().cast(),
+ Architecture::Ada => Bounded::<u8, 6>::new::<0x19>().cast(),
+ }
}
}
pub(crate) struct Revision {
- major: u8,
- minor: u8,
+ major: Bounded<u8, 4>,
+ minor: Bounded<u8, 4>,
}
impl From<regs::NV_PMC_BOOT_42> for Revision {
fn from(boot0: regs::NV_PMC_BOOT_42) -> Self {
Self {
- major: boot0.major_revision(),
- minor: boot0.minor_revision(),
+ major: boot0.major_revision().cast(),
+ minor: boot0.minor_revision().cast(),
}
}
}
diff --git a/drivers/gpu/nova-core/gsp/cmdq.rs b/drivers/gpu/nova-core/gsp/cmdq.rs
index 3991ccc0c10f..0a7b00fc399e 100644
--- a/drivers/gpu/nova-core/gsp/cmdq.rs
+++ b/drivers/gpu/nova-core/gsp/cmdq.rs
@@ -475,8 +475,8 @@ fn calculate_checksum<T: Iterator<Item = u8>>(it: T) -> u32 {
/// Notifies the GSP that we have updated the command queue pointers.
fn notify_gsp(bar: &Bar0) {
- regs::NV_PGSP_QUEUE_HEAD::default()
- .set_address(0)
+ regs::NV_PGSP_QUEUE_HEAD::zeroed()
+ .set_address(0u32)
.write(bar);
}
diff --git a/drivers/gpu/nova-core/regs.rs b/drivers/gpu/nova-core/regs.rs
index 82cc6c0790e5..dbc6fa121ef9 100644
--- a/drivers/gpu/nova-core/regs.rs
+++ b/drivers/gpu/nova-core/regs.rs
@@ -1,12 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-// Required to retain the original register names used by OpenRM, which are all capital snake case
-// but are mapped to types.
-#![allow(non_camel_case_types)]
-
-#[macro_use]
-pub(crate) mod macros;
-
use kernel::prelude::*;
use crate::{
@@ -29,20 +22,64 @@
num::FromSafeCast,
};
+// All nova-core registers are 32-bit and `pub(crate)`. Wrap the `register!` macro to avoid
+// repeating this information for every register.
+macro_rules! nv_reg {
+ (
+ $(
+ $(#[$attr:meta])* $name:ident $([ $size:expr $(; $stride:expr)? ])?
+ $(@ $offset:literal)?
+ $(@ $base:ident + $base_offset:literal)?
+ $(=> $alias:ident $(+ $alias_offset:ident)? $([$alias_idx:expr])? )?
+ $(, $comment:literal)? { $($fields:tt)* }
+ )*
+ )=> {
+ $(
+ ::kernel::register!(
+ @reg $(#[$attr])* pub(crate) $name(u32) $([$size $(; $stride)?])?
+ $(@ $offset)?
+ $(@ $base + $base_offset)?
+ $(=> $alias $(+ $alias_offset)? $([$alias_idx])? )?
+ $(, $comment)? { $($fields)* }
+ );
+ )*
+ };
+}
+
// PMC
-register!(NV_PMC_BOOT_0 @ 0x00000000, "Basic revision information about the GPU" {
- 3:0 minor_revision as u8, "Minor revision of the chip";
- 7:4 major_revision as u8, "Major revision of the chip";
- 8:8 architecture_1 as u8, "MSB of the architecture";
- 23:20 implementation as u8, "Implementation version of the architecture";
- 28:24 architecture_0 as u8, "Lower bits of the architecture";
-});
+nv_reg! {
+ /// Basic revision information about the GPU.
+ NV_PMC_BOOT_0 @ 0x00000000 {
+ /// Minor revision of the chip.
+ 3:0 minor_revision;
+ /// Major revision of the chip.
+ 7:4 major_revision;
+ /// Meta-variable `newbase` repeats 0 times, but `offset` repeats 1 time.
+ 8:8 architecture_1;
+ /// Implementation version of the architecture.
+ 23:20 implementation;
+ /// Lower bits of the architecture.
+ 28:24 architecture_0;
+ }
+
+ /// Extended architecture information.
+ NV_PMC_BOOT_42 @ 0x00000a00 {
+ /// Minor revision of the chip.
+ 15:12 minor_revision;
+ /// Major revision of the chip.
+ 19:16 major_revision;
+ /// Implementation version of the architecture.
+ 23:20 implementation;
+ /// Architecture value.
+ 29:24 architecture ?=> Architecture;
+ }
+}
impl NV_PMC_BOOT_0 {
pub(crate) fn is_older_than_fermi(self) -> bool {
// From https://github.com/NVIDIA/open-gpu-doc/tree/master/manuals :
- const NV_PMC_BOOT_0_ARCHITECTURE_GF100: u8 = 0xc;
+ const NV_PMC_BOOT_0_ARCHITECTURE_GF100: u32 = 0xc;
// Older chips left arch1 zeroed out. That, combined with an arch0 value that is less than
// GF100, means "older than Fermi".
@@ -50,13 +87,6 @@ pub(crate) fn is_older_than_fermi(self) -> bool {
}
}
-register!(NV_PMC_BOOT_42 @ 0x00000a00, "Extended architecture information" {
- 15:12 minor_revision as u8, "Minor revision of the chip";
- 19:16 major_revision as u8, "Major revision of the chip";
- 23:20 implementation as u8, "Implementation version of the architecture";
- 29:24 architecture as u8 ?=> Architecture, "Architecture value";
-});
-
impl NV_PMC_BOOT_42 {
/// Combines `architecture` and `implementation` to obtain a code unique to the chipset.
pub(crate) fn chipset(self) -> Result<Chipset> {
@@ -89,35 +119,50 @@ fn fmt(&self, f: &mut kernel::fmt::Formatter<'_>) -> kernel::fmt::Result {
// PBUS
-register!(NV_PBUS_SW_SCRATCH @ 0x00001400[64] {});
+nv_reg! {
+ NV_PBUS_SW_SCRATCH[64] @ 0x00001400 {}
-register!(NV_PBUS_SW_SCRATCH_0E_FRTS_ERR => NV_PBUS_SW_SCRATCH[0xe],
- "scratch register 0xe used as FRTS firmware error code" {
- 31:16 frts_err_code as u16;
-});
+ /// Scratch register 0xe used as FRTS firmware error code.
+ NV_PBUS_SW_SCRATCH_0E_FRTS_ERR => NV_PBUS_SW_SCRATCH[0xe] {
+ 31:16 frts_err_code;
+ }
+}
// PFB
-// The following two registers together hold the physical system memory address that is used by the
-// GPU to perform sysmembar operations (see `fb::SysmemFlush`).
+nv_reg! {
+ /// Low bits of the physical system memory address used by the GPU to perform sysmembar
+ /// operations (see [`crate::fb::SysmemFlush`]).
+ NV_PFB_NISO_FLUSH_SYSMEM_ADDR @ 0x00100c10 {
+ 31:0 adr_39_08;
+ }
-register!(NV_PFB_NISO_FLUSH_SYSMEM_ADDR @ 0x00100c10 {
- 31:0 adr_39_08 as u32;
-});
+ /// High bits of the physical system memory address used by the GPU to perform sysmembar
+ /// operations (see [`crate::fb::SysmemFlush`]).
+ NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI @ 0x00100c40 {
+ 23:0 adr_63_40;
+ }
-register!(NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI @ 0x00100c40 {
- 23:0 adr_63_40 as u32;
-});
+ NV_PFB_PRI_MMU_LOCAL_MEMORY_RANGE @ 0x00100ce0 {
+ 3:0 lower_scale;
+ 9:4 lower_mag;
+ 30:30 ecc_mode_enabled => bool;
+ }
-register!(NV_PFB_PRI_MMU_LOCAL_MEMORY_RANGE @ 0x00100ce0 {
- 3:0 lower_scale as u8;
- 9:4 lower_mag as u8;
- 30:30 ecc_mode_enabled as bool;
-});
+ NV_PGSP_QUEUE_HEAD @ 0x00110c00 {
+ 31:0 address;
+ }
-register!(NV_PGSP_QUEUE_HEAD @ 0x00110c00 {
- 31:0 address as u32;
-});
+ NV_PFB_PRI_MMU_WPR2_ADDR_LO @ 0x001fa824 {
+ /// Bits 12..40 of the lower (inclusive) bound of the WPR2 region.
+ 31:4 lo_val;
+ }
+
+ NV_PFB_PRI_MMU_WPR2_ADDR_HI @ 0x001fa828 {
+ /// Bits 12..40 of the higher (exclusive) bound of the WPR2 region.
+ 31:4 hi_val;
+ }
+}
impl NV_PFB_PRI_MMU_LOCAL_MEMORY_RANGE {
/// Returns the usable framebuffer size, in bytes.
@@ -134,10 +179,6 @@ pub(crate) fn usable_fb_size(self) -> u64 {
}
}
-register!(NV_PFB_PRI_MMU_WPR2_ADDR_LO@...01fa824 {
- 31:4 lo_val as u32, "Bits 12..40 of the lower (inclusive) bound of the WPR2 region";
-});
-
impl NV_PFB_PRI_MMU_WPR2_ADDR_LO {
/// Returns the lower (inclusive) bound of the WPR2 region.
pub(crate) fn lower_bound(self) -> u64 {
@@ -145,10 +186,6 @@ pub(crate) fn lower_bound(self) -> u64 {
}
}
-register!(NV_PFB_PRI_MMU_WPR2_ADDR_HI@...01fa828 {
- 31:4 hi_val as u32, "Bits 12..40 of the higher (exclusive) bound of the WPR2 region";
-});
-
impl NV_PFB_PRI_MMU_WPR2_ADDR_HI {
/// Returns the higher (exclusive) bound of the WPR2 region.
///
@@ -167,29 +204,30 @@ pub(crate) fn higher_bound(self) -> u64 {
// These scratch registers remain powered on even in a low-power state and have a designated group
// number.
-// Boot Sequence Interface (BSI) register used to determine
-// if GSP reload/resume has completed during the boot process.
-register!(NV_PGC6_BSI_SECURE_SCRATCH_14 @ 0x001180f8 {
- 26:26 boot_stage_3_handoff as bool;
-});
-
-// Privilege level mask register. It dictates whether the host CPU has privilege to access the
-// `PGC6_AON_SECURE_SCRATCH_GROUP_05` register (which it needs to read GFW_BOOT).
-register!(NV_PGC6_AON_SECURE_SCRATCH_GROUP_05_PRIV_LEVEL_MASK @ 0x00118128,
- "Privilege level mask register" {
- 0:0 read_protection_level0 as bool, "Set after FWSEC lowers its protection level";
-});
-
-// OpenRM defines this as a register array, but doesn't specify its size and only uses its first
-// element. Be conservative until we know the actual size or need to use more registers.
-register!(NV_PGC6_AON_SECURE_SCRATCH_GROUP_05 @ 0x00118234[1] {});
-
-register!(
- NV_PGC6_AON_SECURE_SCRATCH_GROUP_05_0_GFW_BOOT => NV_PGC6_AON_SECURE_SCRATCH_GROUP_05[0],
- "Scratch group 05 register 0 used as GFW boot progress indicator" {
- 7:0 progress as u8, "Progress of GFW boot (0xff means completed)";
+nv_reg! {
+ /// Boot Sequence Interface (BSI) register used to determine
+ /// if GSP reload/resume has completed during the boot process.
+ NV_PGC6_BSI_SECURE_SCRATCH_14 @ 0x001180f8 {
+ 26:26 boot_stage_3_handoff => bool;
}
-);
+
+ /// Privilege level mask register. It dictates whether the host CPU has privilege to access the
+ /// `PGC6_AON_SECURE_SCRATCH_GROUP_05` register (which it needs to read GFW_BOOT).
+ NV_PGC6_AON_SECURE_SCRATCH_GROUP_05_PRIV_LEVEL_MASK @ 0x00118128 {
+ /// Set after FWSEC lowers its protection level.
+ 0:0 read_protection_level0 => bool;
+ }
+
+ /// OpenRM defines this as a register array, but doesn't specify its size and only uses its
+ /// first element. Be conservative until we know the actual size or need to use more registers.
+ NV_PGC6_AON_SECURE_SCRATCH_GROUP_05[1] @ 0x00118234 {}
+
+ /// Scratch group 05 register 0 used as GFW boot progress indicator.
+ NV_PGC6_AON_SECURE_SCRATCH_GROUP_05_0_GFW_BOOT => NV_PGC6_AON_SECURE_SCRATCH_GROUP_05[0] {
+ /// Progress of GFW boot (0xff means completed).
+ 7:0 progress;
+ }
+}
impl NV_PGC6_AON_SECURE_SCRATCH_GROUP_05_0_GFW_BOOT {
/// Returns `true` if GFW boot is completed.
@@ -198,16 +236,17 @@ pub(crate) fn completed(self) -> bool {
}
}
-register!(NV_PGC6_AON_SECURE_SCRATCH_GROUP_42 @ 0x001183a4 {
- 31:0 value as u32;
-});
-
-register!(
- NV_USABLE_FB_SIZE_IN_MB => NV_PGC6_AON_SECURE_SCRATCH_GROUP_42,
- "Scratch group 42 register used as framebuffer size" {
- 31:0 value as u32, "Usable framebuffer size, in megabytes";
+nv_reg! {
+ NV_PGC6_AON_SECURE_SCRATCH_GROUP_42 @ 0x001183a4 {
+ 31:0 value;
}
-);
+
+ /// Scratch group 42 register used as framebuffer size.
+ NV_USABLE_FB_SIZE_IN_MB => NV_PGC6_AON_SECURE_SCRATCH_GROUP_42 {
+ /// Usable framebuffer size, in megabytes.
+ 31:0 value;
+ }
+}
impl NV_USABLE_FB_SIZE_IN_MB {
/// Returns the usable framebuffer size, in bytes.
@@ -218,10 +257,14 @@ pub(crate) fn usable_fb_size(self) -> u64 {
// PDISP
-register!(NV_PDISP_VGA_WORKSPACE_BASE @ 0x00625f04 {
- 3:3 status_valid as bool, "Set if the `addr` field is valid";
- 31:8 addr as u32, "VGA workspace base address divided by 0x10000";
-});
+nv_reg! {
+ NV_PDISP_VGA_WORKSPACE_BASE @ 0x00625f04 {
+ /// Set if the `addr` field is valid.
+ 3:3 status_valid => bool;
+ /// VGA workspace base address divided by 0x10000.
+ 31:8 addr;
+ }
+}
impl NV_PDISP_VGA_WORKSPACE_BASE {
/// Returns the base address of the VGA workspace, or `None` if none exists.
@@ -238,48 +281,127 @@ pub(crate) fn vga_workspace_addr(self) -> Option<u64> {
pub(crate) const NV_FUSE_OPT_FPF_SIZE: usize = 16;
-register!(NV_FUSE_OPT_FPF_NVDEC_UCODE1_VERSION @ 0x00824100[NV_FUSE_OPT_FPF_SIZE] {
- 15:0 data as u16;
-});
+nv_reg! {
+ NV_FUSE_OPT_FPF_NVDEC_UCODE1_VERSION[NV_FUSE_OPT_FPF_SIZE] @ 0x00824100 {
+ 15:0 data;
+ }
-register!(NV_FUSE_OPT_FPF_SEC2_UCODE1_VERSION @ 0x00824140[NV_FUSE_OPT_FPF_SIZE] {
- 15:0 data as u16;
-});
+ NV_FUSE_OPT_FPF_SEC2_UCODE1_VERSION[NV_FUSE_OPT_FPF_SIZE] @ 0x00824140 {
+ 15:0 data;
+ }
-register!(NV_FUSE_OPT_FPF_GSP_UCODE1_VERSION @ 0x008241c0[NV_FUSE_OPT_FPF_SIZE] {
- 15:0 data as u16;
-});
+ NV_FUSE_OPT_FPF_GSP_UCODE1_VERSION[NV_FUSE_OPT_FPF_SIZE] @ 0x008241c0 {
+ 15:0 data;
+ }
+}
// PFALCON
-register!(NV_PFALCON_FALCON_IRQSCLR @ PFalconBase[0x00000004] {
- 4:4 halt as bool;
- 6:6 swgen0 as bool;
-});
+nv_reg! {
+ NV_PFALCON_FALCON_IRQSCLR @ PFalconBase + 0x00000004 {
+ 4:4 halt => bool;
+ 6:6 swgen0 => bool;
+ }
-register!(NV_PFALCON_FALCON_MAILBOX0 @ PFalconBase[0x00000040] {
- 31:0 value as u32;
-});
+ NV_PFALCON_FALCON_MAILBOX0 @ PFalconBase + 0x00000040 {
+ 31:0 value => u32;
+ }
-register!(NV_PFALCON_FALCON_MAILBOX1 @ PFalconBase[0x00000044] {
- 31:0 value as u32;
-});
+ NV_PFALCON_FALCON_MAILBOX1 @ PFalconBase + 0x00000044 {
+ 31:0 value => u32;
+ }
-// Used to store version information about the firmware running
-// on the Falcon processor.
-register!(NV_PFALCON_FALCON_OS @ PFalconBase[0x00000080] {
- 31:0 value as u32;
-});
+ /// Used to store version information about the firmware running
+ /// on the Falcon processor.
+ NV_PFALCON_FALCON_OS @ PFalconBase + 0x00000080 {
+ 31:0 value => u32;
+ }
-register!(NV_PFALCON_FALCON_RM @ PFalconBase[0x00000084] {
- 31:0 value as u32;
-});
+ NV_PFALCON_FALCON_RM @ PFalconBase + 0x00000084 {
+ 31:0 value => u32;
+ }
-register!(NV_PFALCON_FALCON_HWCFG2 @ PFalconBase[0x000000f4] {
- 10:10 riscv as bool;
- 12:12 mem_scrubbing as bool, "Set to 0 after memory scrubbing is completed";
- 31:31 reset_ready as bool, "Signal indicating that reset is completed (GA102+)";
-});
+ NV_PFALCON_FALCON_HWCFG2 @ PFalconBase + 0x000000f4 {
+ 10:10 riscv => bool;
+ /// Set to 0 after memory scrubbing is completed.
+ 12:12 mem_scrubbing => bool;
+ /// Signal indicating that reset is completed (GA102+).
+ 31:31 reset_ready => bool;
+ }
+
+ NV_PFALCON_FALCON_CPUCTL @ PFalconBase + 0x00000100 {
+ 1:1 startcpu => bool;
+ 4:4 halted => bool;
+ 6:6 alias_en => bool;
+ }
+
+ NV_PFALCON_FALCON_BOOTVEC @ PFalconBase + 0x00000104 {
+ 31:0 value => u32;
+ }
+
+ NV_PFALCON_FALCON_DMACTL @ PFalconBase + 0x0000010c {
+ 0:0 require_ctx => bool;
+ 1:1 dmem_scrubbing => bool;
+ 2:2 imem_scrubbing => bool;
+ 6:3 dmaq_num;
+ 7:7 secure_stat => bool;
+ }
+
+ NV_PFALCON_FALCON_DMATRFBASE @ PFalconBase + 0x00000110 {
+ 31:0 base => u32;
+ }
+
+ NV_PFALCON_FALCON_DMATRFMOFFS @ PFalconBase + 0x00000114 {
+ 23:0 offs;
+ }
+
+ NV_PFALCON_FALCON_DMATRFCMD @ PFalconBase + 0x00000118 {
+ 0:0 full => bool;
+ 1:1 idle => bool;
+ 3:2 sec;
+ 4:4 imem => bool;
+ 5:5 is_write => bool;
+ 10:8 size ?=> DmaTrfCmdSize;
+ 14:12 ctxdma;
+ 16:16 set_dmtag;
+ }
+
+ NV_PFALCON_FALCON_DMATRFFBOFFS @ PFalconBase + 0x0000011c {
+ 31:0 offs => u32;
+ }
+
+ NV_PFALCON_FALCON_DMATRFBASE1 @ PFalconBase + 0x00000128 {
+ 8:0 base;
+ }
+
+ NV_PFALCON_FALCON_HWCFG1 @ PFalconBase + 0x0000012c {
+ /// Core revision.
+ 3:0 core_rev ?=> FalconCoreRev;
+ /// Security model.
+ 5:4 security_model ?=> FalconSecurityModel;
+ /// Core revision subversion.
+ 7:6 core_rev_subversion => FalconCoreRevSubversion;
+ }
+
+ NV_PFALCON_FALCON_CPUCTL_ALIAS @ PFalconBase + 0x00000130 {
+ 1:1 startcpu => bool;
+ }
+
+ /// Actually known as `NV_PSEC_FALCON_ENGINE` and `NV_PGSP_FALCON_ENGINE` depending on the
+ /// falcon instance.
+ NV_PFALCON_FALCON_ENGINE @ PFalconBase + 0x000003c0 {
+ 0:0 reset => bool;
+ }
+
+ NV_PFALCON_FBIF_TRANSCFG[8] @ PFalconBase + 0x00000600 {
+ 1:0 target ?=> FalconFbifTarget;
+ 2:2 mem_type => FalconFbifMemType;
+ }
+
+ NV_PFALCON_FBIF_CTL @ PFalconBase + 0x00000624 {
+ 7:7 allow_phys_no_ctx => bool;
+ }
+}
impl NV_PFALCON_FALCON_HWCFG2 {
/// Returns `true` if memory scrubbing is completed.
@@ -288,108 +410,42 @@ pub(crate) fn mem_scrubbing_done(self) -> bool {
}
}
-register!(NV_PFALCON_FALCON_CPUCTL @ PFalconBase[0x00000100] {
- 1:1 startcpu as bool;
- 4:4 halted as bool;
- 6:6 alias_en as bool;
-});
-
-register!(NV_PFALCON_FALCON_BOOTVEC @ PFalconBase[0x00000104] {
- 31:0 value as u32;
-});
-
-register!(NV_PFALCON_FALCON_DMACTL @ PFalconBase[0x0000010c] {
- 0:0 require_ctx as bool;
- 1:1 dmem_scrubbing as bool;
- 2:2 imem_scrubbing as bool;
- 6:3 dmaq_num as u8;
- 7:7 secure_stat as bool;
-});
-
-register!(NV_PFALCON_FALCON_DMATRFBASE @ PFalconBase[0x00000110] {
- 31:0 base as u32;
-});
-
-register!(NV_PFALCON_FALCON_DMATRFMOFFS @ PFalconBase[0x00000114] {
- 23:0 offs as u32;
-});
-
-register!(NV_PFALCON_FALCON_DMATRFCMD @ PFalconBase[0x00000118] {
- 0:0 full as bool;
- 1:1 idle as bool;
- 3:2 sec as u8;
- 4:4 imem as bool;
- 5:5 is_write as bool;
- 10:8 size as u8 ?=> DmaTrfCmdSize;
- 14:12 ctxdma as u8;
- 16:16 set_dmtag as u8;
-});
-
-register!(NV_PFALCON_FALCON_DMATRFFBOFFS @ PFalconBase[0x0000011c] {
- 31:0 offs as u32;
-});
-
-register!(NV_PFALCON_FALCON_DMATRFBASE1 @ PFalconBase[0x00000128] {
- 8:0 base as u16;
-});
-
-register!(NV_PFALCON_FALCON_HWCFG1 @ PFalconBase[0x0000012c] {
- 3:0 core_rev as u8 ?=> FalconCoreRev, "Core revision";
- 5:4 security_model as u8 ?=> FalconSecurityModel, "Security model";
- 7:6 core_rev_subversion as u8 ?=> FalconCoreRevSubversion, "Core revision subversion";
-});
-
-register!(NV_PFALCON_FALCON_CPUCTL_ALIAS @ PFalconBase[0x00000130] {
- 1:1 startcpu as bool;
-});
-
-// Actually known as `NV_PSEC_FALCON_ENGINE` and `NV_PGSP_FALCON_ENGINE` depending on the falcon
-// instance.
-register!(NV_PFALCON_FALCON_ENGINE @ PFalconBase[0x000003c0] {
- 0:0 reset as bool;
-});
-
-register!(NV_PFALCON_FBIF_TRANSCFG @ PFalconBase[0x00000600[8]] {
- 1:0 target as u8 ?=> FalconFbifTarget;
- 2:2 mem_type as bool => FalconFbifMemType;
-});
-
-register!(NV_PFALCON_FBIF_CTL @ PFalconBase[0x00000624] {
- 7:7 allow_phys_no_ctx as bool;
-});
-
/* PFALCON2 */
-register!(NV_PFALCON2_FALCON_MOD_SEL @ PFalcon2Base[0x00000180] {
- 7:0 algo as u8 ?=> FalconModSelAlgo;
-});
+nv_reg! {
+ NV_PFALCON2_FALCON_MOD_SEL @ PFalcon2Base + 0x00000180 {
+ 7:0 algo ?=> FalconModSelAlgo;
+ }
-register!(NV_PFALCON2_FALCON_BROM_CURR_UCODE_ID @ PFalcon2Base[0x00000198] {
- 7:0 ucode_id as u8;
-});
+ NV_PFALCON2_FALCON_BROM_CURR_UCODE_ID @ PFalcon2Base + 0x00000198 {
+ 7:0 ucode_id => u8;
+ }
-register!(NV_PFALCON2_FALCON_BROM_ENGIDMASK @ PFalcon2Base[0x0000019c] {
- 31:0 value as u32;
-});
+ NV_PFALCON2_FALCON_BROM_ENGIDMASK @ PFalcon2Base + 0x0000019c {
+ 31:0 value => u32;
+ }
-// OpenRM defines this as a register array, but doesn't specify its size and only uses its first
-// element. Be conservative until we know the actual size or need to use more registers.
-register!(NV_PFALCON2_FALCON_BROM_PARAADDR @ PFalcon2Base[0x00000210[1]] {
- 31:0 value as u32;
-});
+ /// OpenRM defines this as a register array, but doesn't specify its size and only uses its
+ /// first element. Be conservative until we know the actual size or need to use more registers.
+ NV_PFALCON2_FALCON_BROM_PARAADDR[1] @ PFalcon2Base + 0x00000210 {
+ 31:0 value => u32;
+ }
+}
// PRISCV
-register!(NV_PRISCV_RISCV_CPUCTL @ PFalcon2Base[0x00000388] {
- 0:0 halted as bool;
- 7:7 active_stat as bool;
-});
+nv_reg! {
+ NV_PRISCV_RISCV_CPUCTL @ PFalcon2Base + 0x00000388 {
+ 0:0 halted => bool;
+ 7:7 active_stat => bool;
+ }
-register!(NV_PRISCV_RISCV_BCR_CTRL @ PFalcon2Base[0x00000668] {
- 0:0 valid as bool;
- 4:4 core_select as bool => PeregrineCoreSelect;
- 8:8 br_fetch as bool;
-});
+ NV_PRISCV_RISCV_BCR_CTRL @ PFalconBase + 0x00001668 {
+ 0:0 valid => bool;
+ 4:4 core_select => PeregrineCoreSelect;
+ 8:8 br_fetch => bool;
+ }
+}
// The modules below provide registers that are not identical on all supported chips. They should
// only be used in HAL modules.
@@ -397,15 +453,19 @@ pub(crate) fn mem_scrubbing_done(self) -> bool {
pub(crate) mod gm107 {
// FUSE
- register!(NV_FUSE_STATUS_OPT_DISPLAY @ 0x00021c04 {
- 0:0 display_disabled as bool;
- });
+ nv_reg! {
+ NV_FUSE_STATUS_OPT_DISPLAY @ 0x00021c04 {
+ 0:0 display_disabled => bool;
+ }
+ }
}
pub(crate) mod ga100 {
// FUSE
- register!(NV_FUSE_STATUS_OPT_DISPLAY @ 0x00820c04 {
- 0:0 display_disabled as bool;
- });
+ nv_reg! {
+ NV_FUSE_STATUS_OPT_DISPLAY @ 0x00820c04 {
+ 0:0 display_disabled => bool;
+ }
+ }
}
diff --git a/drivers/gpu/nova-core/regs/macros.rs b/drivers/gpu/nova-core/regs/macros.rs
deleted file mode 100644
index ed624be1f39b..000000000000
--- a/drivers/gpu/nova-core/regs/macros.rs
+++ /dev/null
@@ -1,739 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-//! `register!` macro to define register layout and accessors.
-//!
-//! A single register typically includes several fields, which are accessed through a combination
-//! of bit-shift and mask operations that introduce a class of potential mistakes, notably because
-//! not all possible field values are necessarily valid.
-//!
-//! The `register!` macro in this module provides an intuitive and readable syntax for defining a
-//! dedicated type for each register. Each such type comes with its own field accessors that can
-//! return an error if a field's value is invalid. Please look at the [`bitfield`] macro for the
-//! complete syntax of fields definitions.
-
-/// Trait providing a base address to be added to the offset of a relative register to obtain
-/// its actual offset.
-///
-/// The `T` generic argument is used to distinguish which base to use, in case a type provides
-/// several bases. It is given to the `register!` macro to restrict the use of the register to
-/// implementors of this particular variant.
-pub(crate) trait RegisterBase<T> {
- const BASE: usize;
-}
-
-/// Defines a dedicated type for a register with an absolute offset, including getter and setter
-/// methods for its fields and methods to read and write it from an `Io` region.
-///
-/// Example:
-///
-/// ```no_run
-/// register!(BOOT_0 @ 0x00000100, "Basic revision information about the GPU" {
-/// 3:0 minor_revision as u8, "Minor revision of the chip";
-/// 7:4 major_revision as u8, "Major revision of the chip";
-/// 28:20 chipset as u32 ?=> Chipset, "Chipset model";
-/// });
-/// ```
-///
-/// This defines a `BOOT_0` type which can be read or written from offset `0x100` of an `Io`
-/// region. It is composed of 3 fields, for instance `minor_revision` is made of the 4 least
-/// significant bits of the register. Each field can be accessed and modified using accessor
-/// methods:
-///
-/// ```no_run
-/// // Read from the register's defined offset (0x100).
-/// let boot0 = BOOT_0::read(&bar);
-/// pr_info!("chip revision: {}.{}", boot0.major_revision(), boot0.minor_revision());
-///
-/// // `Chipset::try_from` is called with the value of the `chipset` field and returns an
-/// // error if it is invalid.
-/// let chipset = boot0.chipset()?;
-///
-/// // Update some fields and write the value back.
-/// boot0.set_major_revision(3).set_minor_revision(10).write(&bar);
-///
-/// // Or, just read and update the register in a single step:
-/// BOOT_0::update(&bar, |r| r.set_major_revision(3).set_minor_revision(10));
-/// ```
-///
-/// The documentation strings are optional. If present, they will be added to the type's
-/// definition, or the field getter and setter methods they are attached to.
-///
-/// It is also possible to create a alias register by using the `=> ALIAS` syntax. This is useful
-/// for cases where a register's interpretation depends on the context:
-///
-/// ```no_run
-/// register!(SCRATCH @ 0x00000200, "Scratch register" {
-/// 31:0 value as u32, "Raw value";
-/// });
-///
-/// register!(SCRATCH_BOOT_STATUS => SCRATCH, "Boot status of the firmware" {
-/// 0:0 completed as bool, "Whether the firmware has completed booting";
-/// });
-/// ```
-///
-/// In this example, `SCRATCH_0_BOOT_STATUS` uses the same I/O address as `SCRATCH`, while also
-/// providing its own `completed` field.
-///
-/// ## Relative registers
-///
-/// A register can be defined as being accessible from a fixed offset of a provided base. For
-/// instance, imagine the following I/O space:
-///
-/// ```text
-/// +-----------------------------+
-/// | ... |
-/// | |
-/// 0x100--->+------------CPU0-------------+
-/// | |
-/// 0x110--->+-----------------------------+
-/// | CPU_CTL |
-/// +-----------------------------+
-/// | ... |
-/// | |
-/// | |
-/// 0x200--->+------------CPU1-------------+
-/// | |
-/// 0x210--->+-----------------------------+
-/// | CPU_CTL |
-/// +-----------------------------+
-/// | ... |
-/// +-----------------------------+
-/// ```
-///
-/// `CPU0` and `CPU1` both have a `CPU_CTL` register that starts at offset `0x10` of their I/O
-/// space segment. Since both instances of `CPU_CTL` share the same layout, we don't want to define
-/// them twice and would prefer a way to select which one to use from a single definition
-///
-/// This can be done using the `Base[Offset]` syntax when specifying the register's address.
-///
-/// `Base` is an arbitrary type (typically a ZST) to be used as a generic parameter of the
-/// [`RegisterBase`] trait to provide the base as a constant, i.e. each type providing a base for
-/// this register needs to implement `RegisterBase<Base>`. Here is the above example translated
-/// into code:
-///
-/// ```no_run
-/// // Type used to identify the base.
-/// pub(crate) struct CpuCtlBase;
-///
-/// // ZST describing `CPU0`.
-/// struct Cpu0;
-/// impl RegisterBase<CpuCtlBase> for Cpu0 {
-/// const BASE: usize = 0x100;
-/// }
-/// // Singleton of `CPU0` used to identify it.
-/// const CPU0: Cpu0 = Cpu0;
-///
-/// // ZST describing `CPU1`.
-/// struct Cpu1;
-/// impl RegisterBase<CpuCtlBase> for Cpu1 {
-/// const BASE: usize = 0x200;
-/// }
-/// // Singleton of `CPU1` used to identify it.
-/// const CPU1: Cpu1 = Cpu1;
-///
-/// // This makes `CPU_CTL` accessible from all implementors of `RegisterBase<CpuCtlBase>`.
-/// register!(CPU_CTL @ CpuCtlBase[0x10], "CPU core control" {
-/// 0:0 start as bool, "Start the CPU core";
-/// });
-///
-/// // The `read`, `write` and `update` methods of relative registers take an extra `base` argument
-/// // that is used to resolve its final address by adding its `BASE` to the offset of the
-/// // register.
-///
-/// // Start `CPU0`.
-/// CPU_CTL::update(bar, &CPU0, |r| r.set_start(true));
-///
-/// // Start `CPU1`.
-/// CPU_CTL::update(bar, &CPU1, |r| r.set_start(true));
-///
-/// // Aliases can also be defined for relative register.
-/// register!(CPU_CTL_ALIAS => CpuCtlBase[CPU_CTL], "Alias to CPU core control" {
-/// 1:1 alias_start as bool, "Start the aliased CPU core";
-/// });
-///
-/// // Start the aliased `CPU0`.
-/// CPU_CTL_ALIAS::update(bar, &CPU0, |r| r.set_alias_start(true));
-/// ```
-///
-/// ## Arrays of registers
-///
-/// Some I/O areas contain consecutive values that can be interpreted in the same way. These areas
-/// can be defined as an array of identical registers, allowing them to be accessed by index with
-/// compile-time or runtime bound checking. Simply define their address as `Address[Size]`, and add
-/// an `idx` parameter to their `read`, `write` and `update` methods:
-///
-/// ```no_run
-/// # fn no_run() -> Result<(), Error> {
-/// # fn get_scratch_idx() -> usize {
-/// # 0x15
-/// # }
-/// // Array of 64 consecutive registers with the same layout starting at offset `0x80`.
-/// register!(SCRATCH @ 0x00000080[64], "Scratch registers" {
-/// 31:0 value as u32;
-/// });
-///
-/// // Read scratch register 0, i.e. I/O address `0x80`.
-/// let scratch_0 = SCRATCH::read(bar, 0).value();
-/// // Read scratch register 15, i.e. I/O address `0x80 + (15 * 4)`.
-/// let scratch_15 = SCRATCH::read(bar, 15).value();
-///
-/// // This is out of bounds and won't build.
-/// // let scratch_128 = SCRATCH::read(bar, 128).value();
-///
-/// // Runtime-obtained array index.
-/// let scratch_idx = get_scratch_idx();
-/// // Access on a runtime index returns an error if it is out-of-bounds.
-/// let some_scratch = SCRATCH::try_read(bar, scratch_idx)?.value();
-///
-/// // Alias to a particular register in an array.
-/// // Here `SCRATCH[8]` is used to convey the firmware exit code.
-/// register!(FIRMWARE_STATUS => SCRATCH[8], "Firmware exit status code" {
-/// 7:0 status as u8;
-/// });
-///
-/// let status = FIRMWARE_STATUS::read(bar).status();
-///
-/// // Non-contiguous register arrays can be defined by adding a stride parameter.
-/// // Here, each of the 16 registers of the array are separated by 8 bytes, meaning that the
-/// // registers of the two declarations below are interleaved.
-/// register!(SCRATCH_INTERLEAVED_0 @ 0x000000c0[16 ; 8], "Scratch registers bank 0" {
-/// 31:0 value as u32;
-/// });
-/// register!(SCRATCH_INTERLEAVED_1 @ 0x000000c4[16 ; 8], "Scratch registers bank 1" {
-/// 31:0 value as u32;
-/// });
-/// # Ok(())
-/// # }
-/// ```
-///
-/// ## Relative arrays of registers
-///
-/// Combining the two features described in the sections above, arrays of registers accessible from
-/// a base can also be defined:
-///
-/// ```no_run
-/// # fn no_run() -> Result<(), Error> {
-/// # fn get_scratch_idx() -> usize {
-/// # 0x15
-/// # }
-/// // Type used as parameter of `RegisterBase` to specify the base.
-/// pub(crate) struct CpuCtlBase;
-///
-/// // ZST describing `CPU0`.
-/// struct Cpu0;
-/// impl RegisterBase<CpuCtlBase> for Cpu0 {
-/// const BASE: usize = 0x100;
-/// }
-/// // Singleton of `CPU0` used to identify it.
-/// const CPU0: Cpu0 = Cpu0;
-///
-/// // ZST describing `CPU1`.
-/// struct Cpu1;
-/// impl RegisterBase<CpuCtlBase> for Cpu1 {
-/// const BASE: usize = 0x200;
-/// }
-/// // Singleton of `CPU1` used to identify it.
-/// const CPU1: Cpu1 = Cpu1;
-///
-/// // 64 per-cpu scratch registers, arranged as an contiguous array.
-/// register!(CPU_SCRATCH @ CpuCtlBase[0x00000080[64]], "Per-CPU scratch registers" {
-/// 31:0 value as u32;
-/// });
-///
-/// let cpu0_scratch_0 = CPU_SCRATCH::read(bar, &Cpu0, 0).value();
-/// let cpu1_scratch_15 = CPU_SCRATCH::read(bar, &Cpu1, 15).value();
-///
-/// // This won't build.
-/// // let cpu0_scratch_128 = CPU_SCRATCH::read(bar, &Cpu0, 128).value();
-///
-/// // Runtime-obtained array index.
-/// let scratch_idx = get_scratch_idx();
-/// // Access on a runtime value returns an error if it is out-of-bounds.
-/// let cpu0_some_scratch = CPU_SCRATCH::try_read(bar, &Cpu0, scratch_idx)?.value();
-///
-/// // `SCRATCH[8]` is used to convey the firmware exit code.
-/// register!(CPU_FIRMWARE_STATUS => CpuCtlBase[CPU_SCRATCH[8]],
-/// "Per-CPU firmware exit status code" {
-/// 7:0 status as u8;
-/// });
-///
-/// let cpu0_status = CPU_FIRMWARE_STATUS::read(bar, &Cpu0).status();
-///
-/// // Non-contiguous register arrays can be defined by adding a stride parameter.
-/// // Here, each of the 16 registers of the array are separated by 8 bytes, meaning that the
-/// // registers of the two declarations below are interleaved.
-/// register!(CPU_SCRATCH_INTERLEAVED_0 @ CpuCtlBase[0x00000d00[16 ; 8]],
-/// "Scratch registers bank 0" {
-/// 31:0 value as u32;
-/// });
-/// register!(CPU_SCRATCH_INTERLEAVED_1 @ CpuCtlBase[0x00000d04[16 ; 8]],
-/// "Scratch registers bank 1" {
-/// 31:0 value as u32;
-/// });
-/// # Ok(())
-/// # }
-/// ```
-macro_rules! register {
- // Creates a register at a fixed offset of the MMIO space.
- ($name:ident @ $offset:literal $(, $comment:literal)? { $($fields:tt)* } ) => {
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_fixed $name @ $offset);
- };
-
- // Creates an alias register of fixed offset register `alias` with its own fields.
- ($name:ident => $alias:ident $(, $comment:literal)? { $($fields:tt)* } ) => {
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_fixed $name @ $alias::OFFSET);
- };
-
- // Creates a register at a relative offset from a base address provider.
- ($name:ident @ $base:ty [ $offset:literal ] $(, $comment:literal)? { $($fields:tt)* } ) => {
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_relative $name @ $base [ $offset ]);
- };
-
- // Creates an alias register of relative offset register `alias` with its own fields.
- ($name:ident => $base:ty [ $alias:ident ] $(, $comment:literal)? { $($fields:tt)* }) => {
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_relative $name @ $base [ $alias::OFFSET ]);
- };
-
- // Creates an array of registers at a fixed offset of the MMIO space.
- (
- $name:ident @ $offset:literal [ $size:expr ; $stride:expr ] $(, $comment:literal)? {
- $($fields:tt)*
- }
- ) => {
- static_assert!(::core::mem::size_of::<u32>() <= $stride);
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_array $name @ $offset [ $size ; $stride ]);
- };
-
- // Shortcut for contiguous array of registers (stride == size of element).
- (
- $name:ident @ $offset:literal [ $size:expr ] $(, $comment:literal)? {
- $($fields:tt)*
- }
- ) => {
- register!($name @ $offset [ $size ; ::core::mem::size_of::<u32>() ] $(, $comment)? {
- $($fields)*
- } );
- };
-
- // Creates an array of registers at a relative offset from a base address provider.
- (
- $name:ident @ $base:ty [ $offset:literal [ $size:expr ; $stride:expr ] ]
- $(, $comment:literal)? { $($fields:tt)* }
- ) => {
- static_assert!(::core::mem::size_of::<u32>() <= $stride);
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_relative_array $name @ $base [ $offset [ $size ; $stride ] ]);
- };
-
- // Shortcut for contiguous array of relative registers (stride == size of element).
- (
- $name:ident @ $base:ty [ $offset:literal [ $size:expr ] ] $(, $comment:literal)? {
- $($fields:tt)*
- }
- ) => {
- register!($name @ $base [ $offset [ $size ; ::core::mem::size_of::<u32>() ] ]
- $(, $comment)? { $($fields)* } );
- };
-
- // Creates an alias of register `idx` of relative array of registers `alias` with its own
- // fields.
- (
- $name:ident => $base:ty [ $alias:ident [ $idx:expr ] ] $(, $comment:literal)? {
- $($fields:tt)*
- }
- ) => {
- static_assert!($idx < $alias::SIZE);
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_relative $name @ $base [ $alias::OFFSET + $idx * $alias::STRIDE ] );
- };
-
- // Creates an alias of register `idx` of array of registers `alias` with its own fields.
- // This rule belongs to the (non-relative) register arrays set, but needs to be put last
- // to avoid it being interpreted in place of the relative register array alias rule.
- ($name:ident => $alias:ident [ $idx:expr ] $(, $comment:literal)? { $($fields:tt)* }) => {
- static_assert!($idx < $alias::SIZE);
- bitfield!(pub(crate) struct $name(u32) $(, $comment)? { $($fields)* } );
- register!(@io_fixed $name @ $alias::OFFSET + $idx * $alias::STRIDE );
- };
-
- // Generates the IO accessors for a fixed offset register.
- (@io_fixed $name:ident @ $offset:expr) => {
- #[allow(dead_code)]
- impl $name {
- pub(crate) const OFFSET: usize = $offset;
-
- /// Read the register from its address in `io`.
- #[inline(always)]
- pub(crate) fn read<T, I>(io: &T) -> Self where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- {
- Self(io.read32($offset))
- }
-
- /// Write the value contained in `self` to the register address in `io`.
- #[inline(always)]
- pub(crate) fn write<T, I>(self, io: &T) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- {
- io.write32(self.0, $offset)
- }
-
- /// Read the register from its address in `io` and run `f` on its value to obtain a new
- /// value to write back.
- #[inline(always)]
- pub(crate) fn update<T, I, F>(
- io: &T,
- f: F,
- ) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- F: ::core::ops::FnOnce(Self) -> Self,
- {
- let reg = f(Self::read(io));
- reg.write(io);
- }
- }
- };
-
- // Generates the IO accessors for a relative offset register.
- (@io_relative $name:ident @ $base:ty [ $offset:expr ]) => {
- #[allow(dead_code)]
- impl $name {
- pub(crate) const OFFSET: usize = $offset;
-
- /// Read the register from `io`, using the base address provided by `base` and adding
- /// the register's offset to it.
- #[inline(always)]
- pub(crate) fn read<T, I, B>(
- io: &T,
- #[allow(unused_variables)]
- base: &B,
- ) -> Self where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- {
- const OFFSET: usize = $name::OFFSET;
-
- let value = io.read32(
- <B as crate::regs::macros::RegisterBase<$base>>::BASE + OFFSET
- );
-
- Self(value)
- }
-
- /// Write the value contained in `self` to `io`, using the base address provided by
- /// `base` and adding the register's offset to it.
- #[inline(always)]
- pub(crate) fn write<T, I, B>(
- self,
- io: &T,
- #[allow(unused_variables)]
- base: &B,
- ) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- {
- const OFFSET: usize = $name::OFFSET;
-
- io.write32(
- self.0,
- <B as crate::regs::macros::RegisterBase<$base>>::BASE + OFFSET
- );
- }
-
- /// Read the register from `io`, using the base address provided by `base` and adding
- /// the register's offset to it, then run `f` on its value to obtain a new value to
- /// write back.
- #[inline(always)]
- pub(crate) fn update<T, I, B, F>(
- io: &T,
- base: &B,
- f: F,
- ) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- F: ::core::ops::FnOnce(Self) -> Self,
- {
- let reg = f(Self::read(io, base));
- reg.write(io, base);
- }
- }
- };
-
- // Generates the IO accessors for an array of registers.
- (@io_array $name:ident @ $offset:literal [ $size:expr ; $stride:expr ]) => {
- #[allow(dead_code)]
- impl $name {
- pub(crate) const OFFSET: usize = $offset;
- pub(crate) const SIZE: usize = $size;
- pub(crate) const STRIDE: usize = $stride;
-
- /// Read the array register at index `idx` from its address in `io`.
- #[inline(always)]
- pub(crate) fn read<T, I>(
- io: &T,
- idx: usize,
- ) -> Self where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- {
- build_assert!(idx < Self::SIZE);
-
- let offset = Self::OFFSET + (idx * Self::STRIDE);
- let value = io.read32(offset);
-
- Self(value)
- }
-
- /// Write the value contained in `self` to the array register with index `idx` in `io`.
- #[inline(always)]
- pub(crate) fn write<T, I>(
- self,
- io: &T,
- idx: usize
- ) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- {
- build_assert!(idx < Self::SIZE);
-
- let offset = Self::OFFSET + (idx * Self::STRIDE);
-
- io.write32(self.0, offset);
- }
-
- /// Read the array register at index `idx` in `io` and run `f` on its value to obtain a
- /// new value to write back.
- #[inline(always)]
- pub(crate) fn update<T, I, F>(
- io: &T,
- idx: usize,
- f: F,
- ) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- F: ::core::ops::FnOnce(Self) -> Self,
- {
- let reg = f(Self::read(io, idx));
- reg.write(io, idx);
- }
-
- /// Read the array register at index `idx` from its address in `io`.
- ///
- /// The validity of `idx` is checked at run-time, and `EINVAL` is returned is the
- /// access was out-of-bounds.
- #[inline(always)]
- pub(crate) fn try_read<T, I>(
- io: &T,
- idx: usize,
- ) -> ::kernel::error::Result<Self> where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- {
- if idx < Self::SIZE {
- Ok(Self::read(io, idx))
- } else {
- Err(EINVAL)
- }
- }
-
- /// Write the value contained in `self` to the array register with index `idx` in `io`.
- ///
- /// The validity of `idx` is checked at run-time, and `EINVAL` is returned is the
- /// access was out-of-bounds.
- #[inline(always)]
- pub(crate) fn try_write<T, I>(
- self,
- io: &T,
- idx: usize,
- ) -> ::kernel::error::Result where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- {
- if idx < Self::SIZE {
- Ok(self.write(io, idx))
- } else {
- Err(EINVAL)
- }
- }
-
- /// Read the array register at index `idx` in `io` and run `f` on its value to obtain a
- /// new value to write back.
- ///
- /// The validity of `idx` is checked at run-time, and `EINVAL` is returned is the
- /// access was out-of-bounds.
- #[inline(always)]
- pub(crate) fn try_update<T, I, F>(
- io: &T,
- idx: usize,
- f: F,
- ) -> ::kernel::error::Result where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- F: ::core::ops::FnOnce(Self) -> Self,
- {
- if idx < Self::SIZE {
- Ok(Self::update(io, idx, f))
- } else {
- Err(EINVAL)
- }
- }
- }
- };
-
- // Generates the IO accessors for an array of relative registers.
- (
- @io_relative_array $name:ident @ $base:ty
- [ $offset:literal [ $size:expr ; $stride:expr ] ]
- ) => {
- #[allow(dead_code)]
- impl $name {
- pub(crate) const OFFSET: usize = $offset;
- pub(crate) const SIZE: usize = $size;
- pub(crate) const STRIDE: usize = $stride;
-
- /// Read the array register at index `idx` from `io`, using the base address provided
- /// by `base` and adding the register's offset to it.
- #[inline(always)]
- pub(crate) fn read<T, I, B>(
- io: &T,
- #[allow(unused_variables)]
- base: &B,
- idx: usize,
- ) -> Self where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- {
- build_assert!(idx < Self::SIZE);
-
- let offset = <B as crate::regs::macros::RegisterBase<$base>>::BASE +
- Self::OFFSET + (idx * Self::STRIDE);
- let value = io.read32(offset);
-
- Self(value)
- }
-
- /// Write the value contained in `self` to `io`, using the base address provided by
- /// `base` and adding the offset of array register `idx` to it.
- #[inline(always)]
- pub(crate) fn write<T, I, B>(
- self,
- io: &T,
- #[allow(unused_variables)]
- base: &B,
- idx: usize
- ) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- {
- build_assert!(idx < Self::SIZE);
-
- let offset = <B as crate::regs::macros::RegisterBase<$base>>::BASE +
- Self::OFFSET + (idx * Self::STRIDE);
-
- io.write32(self.0, offset);
- }
-
- /// Read the array register at index `idx` from `io`, using the base address provided
- /// by `base` and adding the register's offset to it, then run `f` on its value to
- /// obtain a new value to write back.
- #[inline(always)]
- pub(crate) fn update<T, I, B, F>(
- io: &T,
- base: &B,
- idx: usize,
- f: F,
- ) where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- F: ::core::ops::FnOnce(Self) -> Self,
- {
- let reg = f(Self::read(io, base, idx));
- reg.write(io, base, idx);
- }
-
- /// Read the array register at index `idx` from `io`, using the base address provided
- /// by `base` and adding the register's offset to it.
- ///
- /// The validity of `idx` is checked at run-time, and `EINVAL` is returned is the
- /// access was out-of-bounds.
- #[inline(always)]
- pub(crate) fn try_read<T, I, B>(
- io: &T,
- base: &B,
- idx: usize,
- ) -> ::kernel::error::Result<Self> where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- {
- if idx < Self::SIZE {
- Ok(Self::read(io, base, idx))
- } else {
- Err(EINVAL)
- }
- }
-
- /// Write the value contained in `self` to `io`, using the base address provided by
- /// `base` and adding the offset of array register `idx` to it.
- ///
- /// The validity of `idx` is checked at run-time, and `EINVAL` is returned is the
- /// access was out-of-bounds.
- #[inline(always)]
- pub(crate) fn try_write<T, I, B>(
- self,
- io: &T,
- base: &B,
- idx: usize,
- ) -> ::kernel::error::Result where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- {
- if idx < Self::SIZE {
- Ok(self.write(io, base, idx))
- } else {
- Err(EINVAL)
- }
- }
-
- /// Read the array register at index `idx` from `io`, using the base address provided
- /// by `base` and adding the register's offset to it, then run `f` on its value to
- /// obtain a new value to write back.
- ///
- /// The validity of `idx` is checked at run-time, and `EINVAL` is returned is the
- /// access was out-of-bounds.
- #[inline(always)]
- pub(crate) fn try_update<T, I, B, F>(
- io: &T,
- base: &B,
- idx: usize,
- f: F,
- ) -> ::kernel::error::Result where
- T: ::core::ops::Deref<Target = I>,
- I: ::kernel::io::IoKnownSize + ::kernel::io::IoCapable<u32>,
- B: crate::regs::macros::RegisterBase<$base>,
- F: ::core::ops::FnOnce(Self) -> Self,
- {
- if idx < Self::SIZE {
- Ok(Self::update(io, base, idx, f))
- } else {
- Err(EINVAL)
- }
- }
- }
- };
-}
--
2.52.0
Powered by blists - more mailing lists