| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cde224e4-0ee7-4ba4-b26b-1a433e209876@amlogic.com>
Date: Tue, 27 Jan 2026 10:19:54 +0800
From: Jiebing Chen <jiebing.chen@...ogic.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Jiebing Chen via B4 Relay <devnull+jiebing.chen.amlogic.com@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, linux-sound@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
jian.xu@...ogic.com, shuai.li@...ogic.com, zhe.wang@...ogic.com
Subject: Re: [PATCH v6 5/5] arm64: dts: amlogic: Add Amlogic S4 Audio
在 2026/1/26 22:57, Jerome Brunet 写道:
> [ EXTERNAL EMAIL ]
>
> On lun. 26 janv. 2026 at 21:20, Jiebing Chen <jiebing.chen@...ogic.com> wrote:
>
>> 在 2026/1/26 19:19, Jerome Brunet 写道:
>>> [ EXTERNAL EMAIL ]
>>>
>>> On lun. 26 janv. 2026 at 06:01, Jiebing Chen via B4 Relay <devnull+jiebing.chen.amlogic.com@...nel.org> wrote:
>>>
>>>> From: Jiebing Chen <jiebing.chen@...ogic.com>
>>>>
>>>> Add basic audio driver support for the Amlogic S4 based
>>>> Amlogic AQ222 board.
>>>>
>>>> Signed-off-by: Jiebing Chen <jiebing.chen@...ogic.com>
>>>> ---
>>>> .../boot/dts/amlogic/meson-s4-s805x2-aq222.dts | 222 +++++++++++++
>>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 361 +++++++++++++++++++++
>>>> 2 files changed, 583 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>>>> index 0a3f81ea0fb0..43493bc9da46 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>>>> @@ -75,6 +75,19 @@ vddio_ao1v8: regulator-vddio-ao1v8 {
>>>> regulator-always-on;
>>>> };
>>>>
>>>> + vcc5v_reg: regulator-vcc-5v {
>>>> + compatible = "regulator-fixed";
>>>> + vin-supply = <&main_12v>;
>>>> + regulator-name = "VCC5V";
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + gpio = <&gpio GPIOH_7 GPIO_ACTIVE_HIGH>;
>>>> + startup-delay-us = <7000>;
>>>> + enable-active-high;
>>>> + regulator-boot-on;
>>>> + regulator-always-on;
>>>> + };
>>>> +
>>>> /* SY8120B1ABC DC/DC Regulator. */
>>>> vddcpu: regulator-vddcpu {
>>>> compatible = "pwm-regulator";
>>>> @@ -129,6 +142,215 @@ vddcpu: regulator-vddcpu {
>>>> <699000 98>,
>>>> <689000 100>;
>>>> };
>>>> +
>>>> + dmics: audio-codec-1 {
>>>> + compatible = "dmic-codec";
>>>> + #sound-dai-cells = <0>;
>>>> + num-channels = <2>;
>>>> + wakeup-delay-ms = <50>;
>>>> + sound-name-prefix = "MIC";
>>>> + };
>>>> +
>>>> + dioo2133: audio-amplifier-0 {
>>>> + compatible = "simple-audio-amplifier";
>>>> + enable-gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
>>>> + VCC-supply = <&vcc5v_reg>;
>>>> + sound-name-prefix = "10U2";
>>>> + };
>>>> +
>>>> + spdif_dir: audio-spdif-in {
>>>> + compatible = "linux,spdif-dir";
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "DIR";
>>>> + };
>>>> +
>>>> + spdif_dit: audio-spdif-out {
>>>> + compatible = "linux,spdif-dit";
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "DIT";
>>>> + };
>>>> +
>>>> + sound {
>>>> + compatible = "amlogic,axg-sound-card";
>>>> + model = "aq222";
>>>> + audio-widgets = "Line", "Lineout";
>>>> + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
>>>> + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
>>>> + <&tdmin_lb>, <&dioo2133>;
>>>> + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
>>>> + "TDMOUT_A IN 1", "FRDDR_B OUT 0",
>>>> + "TDMOUT_A IN 2", "FRDDR_C OUT 0",
>>>> + "TDM_A Playback", "TDMOUT_A OUT",
>>>> + "TDMOUT_B IN 0", "FRDDR_A OUT 1",
>>>> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
>>>> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
>>>> + "TDM_B Playback", "TDMOUT_B OUT",
>>>> + "TDMOUT_C IN 0", "FRDDR_A OUT 2",
>>>> + "TDMOUT_C IN 1", "FRDDR_B OUT 2",
>>>> + "TDMOUT_C IN 2", "FRDDR_C OUT 2",
>>>> + "TDM_C Playback", "TDMOUT_C OUT",
>>>> + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
>>>> + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
>>>> + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
>>>> + "SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
>>>> + "SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
>>>> + "SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
>>>> + "TDMIN_A IN 0", "TDM_A Capture",
>>>> + "TDMIN_A IN 1", "TDM_B Capture",
>>>> + "TDMIN_A IN 2", "TDM_C Capture",
>>>> + "TDMIN_A IN 3", "TDM_A Loopback",
>>>> + "TDMIN_A IN 4", "TDM_B Loopback",
>>>> + "TDMIN_A IN 5", "TDM_C Loopback",
>>>> + "TDMIN_B IN 0", "TDM_A Capture",
>>>> + "TDMIN_B IN 1", "TDM_B Capture",
>>>> + "TDMIN_B IN 2", "TDM_C Capture",
>>>> + "TDMIN_B IN 3", "TDM_A Loopback",
>>>> + "TDMIN_B IN 4", "TDM_B Loopback",
>>>> + "TDMIN_B IN 5", "TDM_C Loopback",
>>>> + "TDMIN_C IN 0", "TDM_A Capture",
>>>> + "TDMIN_C IN 1", "TDM_B Capture",
>>>> + "TDMIN_C IN 2", "TDM_C Capture",
>>>> + "TDMIN_C IN 3", "TDM_A Loopback",
>>>> + "TDMIN_C IN 4", "TDM_B Loopback",
>>>> + "TDMIN_C IN 5", "TDM_C Loopback",
>>>> + "TDMIN_LB IN 3", "TDM_A Capture",
>>>> + "TDMIN_LB IN 4", "TDM_B Capture",
>>>> + "TDMIN_LB IN 5", "TDM_C Capture",
>>>> + "TDMIN_LB IN 0", "TDM_A Loopback",
>>>> + "TDMIN_LB IN 1", "TDM_B Loopback",
>>>> + "TDMIN_LB IN 2", "TDM_C Loopback",
>>>> + "TODDR_A IN 0", "TDMIN_A OUT",
>>>> + "TODDR_B IN 0", "TDMIN_A OUT",
>>>> + "TODDR_C IN 0", "TDMIN_A OUT",
>>>> + "TODDR_A IN 1", "TDMIN_B OUT",
>>>> + "TODDR_B IN 1", "TDMIN_B OUT",
>>>> + "TODDR_C IN 1", "TDMIN_B OUT",
>>>> + "TODDR_A IN 2", "TDMIN_C OUT",
>>>> + "TODDR_B IN 2", "TDMIN_C OUT",
>>>> + "TODDR_C IN 2", "TDMIN_C OUT",
>>>> + "TODDR_A IN 3", "SPDIFIN Capture",
>>>> + "TODDR_B IN 3", "SPDIFIN Capture",
>>>> + "TODDR_C IN 3", "SPDIFIN Capture",
>>>> + "TODDR_A IN 6", "TDMIN_LB OUT",
>>>> + "TODDR_B IN 6", "TDMIN_LB OUT",
>>>> + "TODDR_C IN 6", "TDMIN_LB OUT",
>>>> + "10U2 INL", "ACODEC LOLP",
>>>> + "10U2 INR", "ACODEC LORP",
>>>> + "Lineout", "10U2 OUTL",
>>>> + "Lineout", "10U2 OUTR";
>>>> + clocks = <&clkc_pll CLKID_HIFI_PLL>,
>>>> + <&clkc_pll CLKID_MPLL0>,
>>>> + <&clkc_pll CLKID_MPLL1>;
>>>> + assigned-clocks = <&clkc_pll CLKID_HIFI_PLL>,
>>>> + <&clkc_pll CLKID_MPLL0>,
>>>> + <&clkc_pll CLKID_MPLL1>;
>>>> + assigned-clock-rates = <1179648000>,
>>>> + <270950400>,
>>>> + <338688000>;
>>> Seems like you've got the 2 last PLLs serving the 44.1kHz rate family.
>>> Why is this needed ?
>> Hi, jermoe
>>
>> Considering that the sample rate is up to 176.4K
> That's not really the question here and there are interfaces (internal
> for example) for which it can go higher than that.
Yes, if the number of tdm slots is smaller, theoretically it is possible
to support a higher sample rate.
>
>> PLL0 270.950400M max support 24bit *176.4k, 32ch for tdm mode
>>
>> Perhaps PLL1 PLL1 calculation error , it should be set up 361.2672M for
>> 32bit * 176.4k * 32ch.
>>
>> In fact, most situations are limited by the speed of the IO pin.
> ... again, no everything goes through those pins.
>
>> Can we remove MPLL1 here and keep MPLL0?
> That's up to you really. I'm merely pointing out that out of the 3 clock
> sources, 2 are setup to serve derivative of 44.1kHz, which is useless.
Two PLLs are indeed unnecessary. I will remove one in next version. thanks
>
>>>> +
>>>> + dai-link-0 {
>>>> + sound-dai = <&frddr_a>;
>>>> + };
>>>> +
>>>> + dai-link-1 {
>>>> + sound-dai = <&frddr_b>;
>>>> + };
>>>> +
>>>> + dai-link-2 {
>>>> + sound-dai = <&frddr_c>;
>>>> + };
>>>> +
>>>> + dai-link-3 {
>>>> + sound-dai = <&toddr_a>;
>>>> + };
>>>> +
>>>> + dai-link-4 {
>>>> + sound-dai = <&toddr_b>;
>>>> + };
>>>> +
>>>> + dai-link-5 {
>>>> + sound-dai = <&toddr_c>;
>>>> + };
>>>> +
>>>> + dai-link-6 {
>>>> + sound-dai = <&tdmif_a>;
>>>> + dai-format = "i2s";
>>>> + dai-tdm-slot-tx-mask-0 = <1 1>;
>>>> + mclk-fs = <256>;
>>>> + codec-0 {
>>>> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
>>>> + };
>>>> + codec-1 {
>>>> + sound-dai = <&toacodec TOACODEC_IN_A>;
>>>> + };
>>>> + };
>>>> +
>>>> + dai-link-7 {
>>>> + sound-dai = <&tdmif_b>;
>>>> + dai-format = "i2s";
>>>> + dai-tdm-slot-tx-mask-0 = <1 1>;
>>>> + mclk-fs = <256>;
>>>> + codec-0 {
>>>> + sound-dai = <&toacodec TOACODEC_IN_B>;
>>>> + };
>>>> + codec-1 {
>>>> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
>>>> + };
>>>> + };
>>>> +
>>>> + /* 8ch HDMI interface */
>>>> + dai-link-8 {
>>>> + sound-dai = <&tdmif_c>;
>>>> + dai-format = "i2s";
>>>> + dai-tdm-slot-tx-mask-0 = <1 1>;
>>>> + dai-tdm-slot-tx-mask-1 = <1 1>;
>>>> + dai-tdm-slot-tx-mask-2 = <1 1>;
>>>> + dai-tdm-slot-tx-mask-3 = <1 1>;
>>>> + mclk-fs = <256>;
>>>> + codec-0 {
>>>> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
>>>> + };
>>>> + };
>>>> +
>>>> + /* spdif hdmi and coax output */
>>>> + dai-link-9 {
>>>> + sound-dai = <&spdifout_a>;
>>>> +
>>>> + codec-0 {
>>>> + sound-dai = <&spdif_dit>;
>>>> + };
>>>> +
>>>> + codec-1 {
>>>> + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
>>>> + };
>>>> + };
>>>> +
>>>> + /* spdif hdmi interface */
>>>> + dai-link-10 {
>>>> + sound-dai = <&spdifout_b>;
>>>> +
>>>> + codec {
>>>> + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
>>>> + };
>>>> + };
>>>> +
>>>> + /* spdif coax input */
>>>> + dai-link-11 {
>>>> + sound-dai = <&spdifin>;
>>>> +
>>>> + codec {
>>>> + sound-dai = <&spdif_dir>;
>>>> + };
>>>> + };
>>>> +
>>>> + dai-link-12 {
>>>> + sound-dai = <&toacodec TOACODEC_OUT>;
>>>> +
>>>> + codec {
>>>> + sound-dai = <&acodec>;
>>>> + };
>>>> + };
>>>> + };
>>>> };
>>>>
>>>> &pwm_ef {
>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>>> index dfc0a30a6e61..a6c2c83eea16 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>>> @@ -11,6 +11,11 @@
>>>> #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
>>>> #include <dt-bindings/power/meson-s4-power.h>
>>>> #include <dt-bindings/reset/amlogic,meson-s4-reset.h>
>>>> +#include <dt-bindings/clock/axg-audio-clkc.h>
>>>> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
>>>> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
>>>> +#include <dt-bindings/sound/meson-g12a-toacodec.h>
>>>> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>>>>
>>>> / {
>>>> cpus {
>>>> @@ -863,4 +868,360 @@ emmc: mmc@...8c000 {
>>>> assigned-clock-rates = <24000000>;
>>>> };
>>>> };
>>>> +
>>>> + tdmif_a: audio-controller-0 {
>>>> + compatible = "amlogic,axg-tdm-iface";
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "TDM_A";
>>>> + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_MST_A_MCLK>;
>>>> + clock-names = "sclk", "lrclk","mclk";
>>>> + };
>>>> +
>>>> + tdmif_b: audio-controller-1 {
>>>> + compatible = "amlogic,axg-tdm-iface";
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "TDM_B";
>>>> + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_MST_B_MCLK>;
>>>> + clock-names = "sclk", "lrclk","mclk";
>>>> + };
>>>> +
>>>> + tdmif_c: audio-controller-2 {
>>>> + compatible = "amlogic,axg-tdm-iface";
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "TDM_C";
>>>> + clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_MST_C_MCLK>;
>>>> + clock-names = "sclk", "lrclk","mclk";
>>>> + };
>>>> +};
>>>> +
>>>> +&apb4 {
>>>> + acodec: audio-controller@...00 {
>>>> + compatible = "amlogic,t9015";
>>>> + reg = <0x0 0x1a000 0x0 0x14>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "ACODEC";
>>>> + clocks = <&clkc_periphs CLKID_ACODEC>;
>>>> + clock-names = "pclk";
>>>> + resets = <&reset RESET_ACODEC>;
>>>> + AVDD-supply = <&vddio_ao1v8>;
>>>> + };
>>>> +
>>>> + clkc_audio: clock-controller@...000 {
>>>> + compatible = "amlogic,s4-audio-clkc";
>>>> + reg = <0x0 0x330000 0x0 0xd8>,
>>>> + <0x0 0x330e80 0x0 0x10>;
>>>> + #clock-cells = <1>;
>>>> + #reset-cells = <1>;
>>>> + power-domains = <&pwrc PWRC_S4_AUDIO_ID>;
>>>> + clocks = <&clkc_periphs CLKID_AUDIO>,
>>>> + <&clkc_pll CLKID_MPLL0>,
>>>> + <&clkc_pll CLKID_MPLL1>,
>>>> + <&clkc_pll CLKID_MPLL2>,
>>>> + <&clkc_pll CLKID_MPLL3>,
>>>> + <&clkc_pll CLKID_HIFI_PLL>,
>>>> + <&clkc_pll CLKID_FCLK_DIV3>,
>>>> + <&clkc_pll CLKID_FCLK_DIV4>,
>>>> + <&clkc_pll CLKID_FCLK_DIV5>;
>>>> + clock-names = "pclk",
>>>> + "mst_in0",
>>>> + "mst_in1",
>>>> + "mst_in2",
>>>> + "mst_in3",
>>>> + "mst_in4",
>>>> + "mst_in5",
>>>> + "mst_in6",
>>>> + "mst_in7";
>>>> + resets = <&reset RESET_AUDIO>;
>>>> + };
>>>> +
>>>> + toddr_a: audio-controller@...100 {
>>>> + compatible = "amlogic,sm1-toddr",
>>>> + "amlogic,axg-toddr";
>>> no s4 compat ?
>>>
>>>> + reg = <0x0 0x330100 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "TODDR_A";
>>>> + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
>>>> + resets = <&arb AXG_ARB_TODDR_A>,
>>>> + <&clkc_audio AUD_RESET_TODDR_A>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <8192>;
>>>> + };
>>>> +
>>>> + toddr_b: audio-controller@...140 {
>>>> + compatible = "amlogic,sm1-toddr",
>>>> + "amlogic,axg-toddr";
>>>> + reg = <0x0 0x330140 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "TODDR_B";
>>>> + interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
>>>> + resets = <&arb AXG_ARB_TODDR_B>,
>>>> + <&clkc_audio AUD_RESET_TODDR_B>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <256>;
>>>> + };
>>>> +
>>>> + toddr_c: audio-controller@...180 {
>>>> + compatible = "amlogic,sm1-toddr",
>>>> + "amlogic,axg-toddr";
>>>> + reg = <0x0 0x330180 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "TODDR_C";
>>>> + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
>>>> + resets = <&arb AXG_ARB_TODDR_C>,
>>>> + <&clkc_audio AUD_RESET_TODDR_C>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <256>;
>>>> + };
>>>> +
>>>> + frddr_a: audio-controller@...1c0 {
>>>> + compatible = "amlogic,sm1-frddr",
>>>> + "amlogic,axg-frddr";
>>>> + reg = <0x0 0x3301c0 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "FRDDR_A";
>>>> + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
>>>> + resets = <&arb AXG_ARB_FRDDR_A>,
>>>> + <&clkc_audio AUD_RESET_FRDDR_A>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <512>;
>>>> + };
>>>> +
>>>> + frddr_b: audio-controller@...200 {
>>>> + compatible = "amlogic,sm1-frddr",
>>>> + "amlogic,axg-frddr";
>>>> + reg = <0x0 0x330200 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "FRDDR_B";
>>>> + interrupts = <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
>>>> + resets = <&arb AXG_ARB_FRDDR_B>,
>>>> + <&clkc_audio AUD_RESET_FRDDR_B>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <256>;
>>>> + };
>>>> +
>>>> + frddr_c: audio-controller@...240 {
>>>> + compatible = "amlogic,sm1-frddr",
>>>> + "amlogic,axg-frddr";
>>>> + reg = <0x0 0x330240 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "FRDDR_C";
>>>> + interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
>>>> + resets = <&arb AXG_ARB_FRDDR_C>,
>>>> + <&clkc_audio AUD_RESET_FRDDR_C>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <256>;
>>>> + };
>>>> +
>>>> + arb: reset-controller@...280 {
>>>> + compatible = "amlogic,meson-sm1-audio-arb";
>>>> + reg = <0x0 0x330280 0x0 0x4>;
>>>> + #reset-cells = <1>;
>>>> + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
>>>> + };
>>>> +
>>>> + tdmin_a: audio-controller@...300 {
>>>> + compatible = "amlogic,sm1-tdmin";
>>>> + reg = <0x0 0x330300 0x0 0x40>;
>>>> + sound-name-prefix = "TDMIN_A";
>>>> + resets = <&clkc_audio AUD_RESET_TDMIN_A>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
>>>> + clock-names = "pclk", "sclk", "sclk_sel",
>>>> + "lrclk", "lrclk_sel";
>>>> + };
>>>> +
>>>> + tdmin_b: audio-controller@...340 {
>>>> + compatible = "amlogic,sm1-tdmin";
>>>> + reg = <0x0 0x330340 0x0 0x40>;
>>>> + sound-name-prefix = "TDMIN_B";
>>>> + resets = <&clkc_audio AUD_RESET_TDMIN_B>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
>>>> + clock-names = "pclk", "sclk", "sclk_sel",
>>>> + "lrclk", "lrclk_sel";
>>>> + };
>>>> +
>>>> + tdmin_c: audio-controller@...380 {
>>>> + compatible = "amlogic,sm1-tdmin";
>>>> + reg = <0x0 0x330380 0x0 0x40>;
>>>> + sound-name-prefix = "TDMIN_C";
>>>> + resets = <&clkc_audio AUD_RESET_TDMIN_C>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
>>>> + clock-names = "pclk", "sclk", "sclk_sel",
>>>> + "lrclk", "lrclk_sel";
>>>> + };
>>>> +
>>>> + tdmin_lb: audio-controller@...3c0 {
>>>> + compatible = "amlogic,sm1-tdmin";
>>>> + reg = <0x0 0x3303c0 0x0 0x40>;
>>>> + sound-name-prefix = "TDMIN_LB";
>>>> + resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
>>>> + clock-names = "pclk", "sclk", "sclk_sel",
>>>> + "lrclk", "lrclk_sel";
>>>> + };
>>>> +
>>>> + spdifin: audio-controller@...400 {
>>>> + compatible = "amlogic,g12a-spdifin",
>>>> + "amlogic,axg-spdifin";
>>>> + reg = <0x0 0x330400 0x0 0x30>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "SPDIFIN";
>>>> + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
>>>> + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
>>>> + clock-names = "pclk", "refclk";
>>>> + resets = <&clkc_audio AUD_RESET_SPDIFIN>;
>>>> + };
>>>> +
>>>> + spdifout_a: audio-controller@...480 {
>>>> + compatible = "amlogic,g12a-spdifout",
>>>> + "amlogic,axg-spdifout";
>>>> + reg = <0x0 0x330480 0x0 0x50>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "SPDIFOUT_A";
>>>> + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
>>>> + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
>>>> + clock-names = "pclk", "mclk";
>>>> + resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
>>>> + };
>>>> +
>>>> + tdmout_a: audio-controller@...500 {
>>>> + compatible = "amlogic,sm1-tdmout";
>>>> + reg = <0x0 0x330500 0x0 0x40>;
>>>> + sound-name-prefix = "TDMOUT_A";
>>>> + resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
>>>> + clock-names = "pclk", "sclk", "sclk_sel",
>>>> + "lrclk", "lrclk_sel";
>>>> + };
>>>> +
>>>> + tdmout_b: audio-controller@...540 {
>>>> + compatible = "amlogic,sm1-tdmout";
>>>> + reg = <0x0 0x330540 0x0 0x40>;
>>>> + sound-name-prefix = "TDMOUT_B";
>>>> + resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
>>>> + clock-names = "pclk", "sclk", "sclk_sel",
>>>> + "lrclk", "lrclk_sel";
>>>> + };
>>>> +
>>>> + tdmout_c: audio-controller@...580 {
>>>> + compatible = "amlogic,sm1-tdmout";
>>>> + reg = <0x0 0x330580 0x0 0x40>;
>>>> + sound-name-prefix = "TDMOUT_C";
>>>> + resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
>>>> + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
>>>> + clock-names = "pclk", "sclk", "sclk_sel",
>>>> + "lrclk", "lrclk_sel";
>>>> + };
>>>> +
>>>> + spdifout_b: audio-controller@...680 {
>>>> + compatible = "amlogic,g12a-spdifout",
>>>> + "amlogic,axg-spdifout";
>>>> + reg = <0x0 0x330680 0x0 0x50>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "SPDIFOUT_B";
>>>> + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
>>>> + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
>>>> + clock-names = "pclk", "mclk";
>>>> + resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
>>>> + };
>>>> +
>>>> + toacodec: audio-controller@...740 {
>>>> + compatible = "amlogic,s4-toacodec",
>>>> + "amlogic,g12a-toacodec";
>>>> + reg = <0x0 0x330740 0x0 0x4>;
>>>> + sound-name-prefix = "TOACODEC";
>>>> + #sound-dai-cells = <1>;
>>>> + resets = <&clkc_audio AUD_RESET_TOACODEC>;
>>>> + };
>>>> +
>>>> + tohdmitx: audio-controller@...744 {
>>>> + compatible = "amlogic,sm1-tohdmitx",
>>>> + "amlogic,g12a-tohdmitx";
>>>> + reg = <0x0 0x330744 0x0 0x4>;
>>>> + #sound-dai-cells = <1>;
>>>> + sound-name-prefix = "TOHDMITX";
>>>> + resets = <&clkc_audio AUD_RESET_TOHDMITX>;
>>>> + };
>>>> +
>>>> + toddr_d: audio-controller@...840 {
>>>> + compatible = "amlogic,sm1-toddr",
>>>> + "amlogic,axg-toddr";
>>>> + reg = <0x0 0x330840 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "TODDR_D";
>>>> + interrupts = <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_TODDR_D>;
>>>> + resets = <&arb AXG_ARB_TODDR_D>,
>>>> + <&clkc_audio AUD_RESET_TODDR_D>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <256>;
>>>> + };
>>>> +
>>>> + frddr_d: audio-controller@...880 {
>>>> + compatible = "amlogic,sm1-frddr",
>>>> + "amlogic,axg-frddr";
>>>> + reg = <0x0 0x330880 0x0 0x2c>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "FRDDR_D";
>>>> + interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
>>>> + clocks = <&clkc_audio AUD_CLKID_FRDDR_D>;
>>>> + resets = <&arb AXG_ARB_FRDDR_D>,
>>>> + <&clkc_audio AUD_RESET_FRDDR_D>;
>>>> + reset-names = "arb", "rst";
>>>> + amlogic,fifo-depth = <256>;
>>>> + };
>>>> +
>>>> + pdm: audio-controller@...000 {
>>>> + compatible = "amlogic,sm1-pdm",
>>>> + "amlogic,axg-pdm";
>>>> + reg = <0x0 0x331000 0x0 0x34>;
>>>> + #sound-dai-cells = <0>;
>>>> + sound-name-prefix = "PDM";
>>>> + clocks = <&clkc_audio AUD_CLKID_PDM>,
>>>> + <&clkc_audio AUD_CLKID_PDM_DCLK>,
>>>> + <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
>>>> + clock-names = "pclk", "dclk", "sysclk";
>>>> + resets = <&clkc_audio AUD_RESET_PDM>;
>>>> + };
>>>> };
>>> --
>>> Jerome
> --
> Jerome
Powered by blists - more mailing lists