linux-kernel - Re: [PATCH v3 1/1] arm64: dts: freescale: add pixpaper display overlay for i.MX93 FRDM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aXpGz3185shqxpyV@lizhi-Precision-Tower-5810>
Date: Wed, 28 Jan 2026 12:26:39 -0500
From: Frank Li <Frank.li@....com>
To: Wig Cheng <onlywig@...il.com>
Cc: shawnguo@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
	conor+dt@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
	festevam@...il.com, devicetree@...r.kernel.org, imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	zaq14760@...il.com
Subject: Re: [PATCH v3 1/1] arm64: dts: freescale: add pixpaper display
 overlay for i.MX93 FRDM

On Wed, Jan 28, 2026 at 11:55:29PM +0800, Wig Cheng wrote:
> Add device tree overlay to support the MayQueen PixPaper e-paper display
> on the NXP i.MX93 FRDM board. The display is connected via LPSPI3
> interface and uses GPIO pins for reset, busy and DC control.
>
> The overlay configures:
>     - LPSPI3 pinmux for SPI communication (MOSI, MISO, CLK, CE0)
>     - PixPaper display device with proper GPIO assignments
>     - SPI frequency set to 5MHz for stable operation
>
> Enable Open-EP Community pixpaper-213-c support on NXP i.MX93.
>
> Signed-off-by: Wig Cheng <onlywig@...il.com>
> ---
Not sure why v3 is under v0's email thread, suppose it should be new email
thread.

Reviewed-by: Frank Li <Frank.Li@....com>
>  arch/arm64/boot/dts/freescale/Makefile        |  4 ++
>  .../freescale/imx93-11x11-frdm-pixpaper.dtso  | 51 +++++++++++++++++++
>  2 files changed, 55 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-frdm-pixpaper.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index ce8f937c2315..c2727f8061e2 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -398,6 +398,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
>
>  dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-frdm.dtb
> +
> +imx93-11x11-frdm-pixpaper-dtbs += imx93-11x11-frdm.dtb imx93-11x11-frdm-pixpaper.dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-frdm-pixpaper.dtb
> +
>  dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-pixpaper.dtso b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-pixpaper.dtso
> new file mode 100644
> index 000000000000..a78284c10838
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-pixpaper.dtso
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Overlay for Mayqueen (Open-EP Community) pixpaper display
> + * support on NXP FRDM i.MX 93 Development Board
> + *
> + * Copyright (C) 2026 Wig Cheng <onlywig@...il.com>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "imx93-pinfunc.h"
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&iomuxc {
> +	pinctrl_lpspi3: lpspi3grp {
> +		fsl,pins = <
> +			MX93_PAD_GPIO_IO08__GPIO2_IO08		0x3fe /* SPI3 CE0 */
> +			MX93_PAD_GPIO_IO09__LPSPI3_SIN		0x3fe /* SPI3 MISO */
> +			MX93_PAD_GPIO_IO10__LPSPI3_SOUT		0x3fe /* SPI3 MOSI */
> +			MX93_PAD_GPIO_IO11__LPSPI3_SCK		0x3fe /* SPI3 CLK */
> +		>;
> +	};
> +
> +	pinctrl_epd_ctrl: epdctrlgrp {
> +		fsl,pins = <
> +			MX93_PAD_GPIO_IO05__GPIO2_IO05		0x31e /* DC pin */
> +			MX93_PAD_GPIO_IO06__GPIO2_IO06		0x31e /* RESET pin */
> +			MX93_PAD_GPIO_IO26__GPIO2_IO26		0x31e /* BUSY pin */
> +		>;
> +	};
> +};
> +
> +&lpspi3 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lpspi3>, <&pinctrl_epd_ctrl>;
> +	cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
> +	fsl,spi-num-chipselects = <1>;
> +	status = "okay";
> +
> +	display@0 {
> +		compatible = "mayqueen,pixpaper";
> +		reg = <0>;
> +		spi-max-frequency = <5000000>;
> +		reset-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> +		dc-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> +		busy-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> --
> 2.43.0
>