| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aXvGkSHbUE3qmxMK@lizhi-Precision-Tower-5810>
Date: Thu, 29 Jan 2026 15:44:01 -0500
From: Frank Li <Frank.li@....com>
To: Sherry Sun <sherry.sun@....com>
Cc: hongxing.zhu@....com, l.stach@...gutronix.de, lpieralisi@...nel.org,
kwilczynski@...nel.org, mani@...nel.org, robh@...nel.org,
bhelgaas@...gle.com, krzk+dt@...nel.org, conor+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, festevam@...il.com,
kernel@...gutronix.de, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V2 02/10] PCI: imx6: Add support for parsing the reset
property in new Root Port binding
On Fri, Jan 23, 2026 at 10:14:37AM +0800, Sherry Sun wrote:
> DT binding allows specifying 'reset' property in both host bridge and
> Root Port nodes, but specifying in the host bridge node is marked as
> deprecated. So add support for parsing the new binding that uses
> 'reset-gpios' property for PERST#.
Need descript why need this change, such as support m.2 key M/E, power
sequence.
Frank
>
> To maintain DT backwards compatibility, fallback to the legacy method of
> parsing the host bridge node if the reset property is not present in the
> Root Port node.
>
> Signed-off-by: Sherry Sun <sherry.sun@....com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 123 +++++++++++++++++++++++---
> 1 file changed, 109 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 1d8677d7de04..4b3377a48b17 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -147,10 +147,15 @@ struct imx_lut_data {
> u32 data2;
> };
>
> +struct imx_pcie_port {
> + struct list_head list;
> + struct gpio_desc *reset;
> +};
> +
> struct imx_pcie {
> struct dw_pcie *pci;
> - struct gpio_desc *reset_gpiod;
> struct clk_bulk_data *clks;
> + struct list_head ports;
> int num_clks;
> bool supports_clkreq;
> bool enable_ext_refclk;
> @@ -896,29 +901,35 @@ static int imx95_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
>
> static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
> {
> + struct imx_pcie_port *port;
> +
> reset_control_assert(imx_pcie->pciephy_reset);
>
> if (imx_pcie->drvdata->core_reset)
> imx_pcie->drvdata->core_reset(imx_pcie, true);
>
> /* Some boards don't have PCIe reset GPIO. */
> - gpiod_set_value_cansleep(imx_pcie->reset_gpiod, 1);
> + list_for_each_entry(port, &imx_pcie->ports, list)
> + gpiod_set_value_cansleep(port->reset, 1);
> }
>
> static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
> {
> + struct imx_pcie_port *port;
> +
> reset_control_deassert(imx_pcie->pciephy_reset);
>
> if (imx_pcie->drvdata->core_reset)
> imx_pcie->drvdata->core_reset(imx_pcie, false);
>
> /* Some boards don't have PCIe reset GPIO. */
> - if (imx_pcie->reset_gpiod) {
> - msleep(100);
> - gpiod_set_value_cansleep(imx_pcie->reset_gpiod, 0);
> - /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
> - msleep(100);
> - }
> + list_for_each_entry(port, &imx_pcie->ports, list)
> + if (port->reset) {
> + msleep(100);
> + gpiod_set_value_cansleep(port->reset, 0);
> + /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
> + msleep(100);
> + }
>
> return 0;
> }
> @@ -1638,6 +1649,76 @@ static const struct dev_pm_ops imx_pcie_pm_ops = {
> imx_pcie_resume_noirq)
> };
>
> +static void imx_pcie_delete_ports(void *data)
> +{
> + struct imx_pcie *pcie = data;
> + struct imx_pcie_port *port, *tmp;
> +
> + list_for_each_entry_safe(port, tmp, &pcie->ports, list)
> + list_del(&port->list);
> +}
> +
> +static int imx_pcie_parse_port(struct imx_pcie *pcie, struct device_node *node)
> +{
> + struct device *dev = pcie->pci->dev;
> + struct imx_pcie_port *port;
> + struct gpio_desc *reset;
> +
> + reset = devm_fwnode_gpiod_get(dev, of_fwnode_handle(node),
> + "reset", GPIOD_OUT_HIGH, "PCIe reset");
> + if (IS_ERR(reset))
> + return PTR_ERR(reset);
> +
> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + port->reset = reset;
> + INIT_LIST_HEAD(&port->list);
> + list_add_tail(&port->list, &pcie->ports);
> +
> + return 0;
> +}
> +
> +static int imx_pcie_parse_ports(struct imx_pcie *pcie)
> +{
> + struct device *dev = pcie->pci->dev;
> + int ret = -ENOENT;
> +
> + for_each_available_child_of_node_scoped(dev->of_node, of_port) {
> + if (!of_node_is_type(of_port, "pci"))
> + continue;
> + ret = imx_pcie_parse_port(pcie, of_port);
> + if (ret) {
> + imx_pcie_delete_ports(pcie);
> + return ret;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static int imx_pcie_parse_legacy_binding(struct imx_pcie *pcie)
> +{
> + struct device *dev = pcie->pci->dev;
> + struct imx_pcie_port *port;
> + struct gpio_desc *reset;
> +
> + reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(reset))
> + return PTR_ERR(reset);
> +
> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + port->reset = reset;
> + INIT_LIST_HEAD(&port->list);
> + list_add_tail(&port->list, &pcie->ports);
> +
> + return 0;
> +}
> +
> static int imx_pcie_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -1656,6 +1737,8 @@ static int imx_pcie_probe(struct platform_device *pdev)
> if (!pci)
> return -ENOMEM;
>
> + INIT_LIST_HEAD(&imx_pcie->ports);
> +
> pci->dev = dev;
> pci->ops = &dw_pcie_ops;
>
> @@ -1684,12 +1767,24 @@ static int imx_pcie_probe(struct platform_device *pdev)
> return PTR_ERR(imx_pcie->phy_base);
> }
>
> - /* Fetch GPIOs */
> - imx_pcie->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> - if (IS_ERR(imx_pcie->reset_gpiod))
> - return dev_err_probe(dev, PTR_ERR(imx_pcie->reset_gpiod),
> - "unable to get reset gpio\n");
> - gpiod_set_consumer_name(imx_pcie->reset_gpiod, "PCIe reset");
> + ret = imx_pcie_parse_ports(imx_pcie);
> + if (ret) {
> + if (ret != -ENOENT)
> + return dev_err_probe(dev, ret, "Failed to parse Root Port: %d\n", ret);
> +
> + /*
> + * In the case of properties not populated in Root Port node,
> + * fallback to the legacy method of parsing the Host Bridge
> + * node. This is to maintain DT backwards compatibility.
> + */
> + ret = imx_pcie_parse_legacy_binding(imx_pcie);
> + if (ret)
> + return dev_err_probe(dev, ret, "Unable to get reset gpio: %d\n", ret);
> + }
> +
> + ret = devm_add_action_or_reset(dev, imx_pcie_delete_ports, imx_pcie);
> + if (ret)
> + return ret;
>
> /* Fetch clocks */
> imx_pcie->num_clks = devm_clk_bulk_get_all(dev, &imx_pcie->clks);
> --
> 2.37.1
>
Powered by blists - more mailing lists