linux-kernel - [PATCH v2 3/3] arm64: dts: imx91-11x11-evk: change usdhc tuning step for eMMC and SD

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20260129080439.2910727-3-ziniu.wang_1@nxp.com>
Date: Thu, 29 Jan 2026 16:04:39 +0800
From: ziniu.wang_1@....com
To: shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	frank.li@....com,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org
Cc: kernel@...gutronix.de,
	festevam@...il.com,
	devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/3] arm64: dts: imx91-11x11-evk: change usdhc tuning step for eMMC and SD

From: Luke Wang <ziniu.wang_1@....com>

During system resume, the following errors occurred:

  [  430.638625] mmc1: error -84 writing Cache Enable bit
  [  430.643618] mmc1: error -84 doing runtime resume

For eMMC and SD, there are two tuning pass windows and the gap between
those two windows may only have one cell. If tuning step > 1, the gap may
just be skipped and host assumes those two windows as a continuous
windows. This will cause a wrong delay cell near the gap to be selected.

Set the tuning step to 1 to avoid selecting the wrong delay cell.

For SDIO, the gap is sufficiently large, so the default tuning step does
not cause this issue.

Signed-off-by: Luke Wang <ziniu.wang_1@....com>
---
 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
index aca78768dbd4..4164d9e4e0fd 100644
--- a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -415,6 +415,7 @@ &usdhc1 {
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	fsl,tuning-step = <1>;
 	status = "okay";
 };
 
@@ -429,6 +430,7 @@ &usdhc2 {
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	fsl,tuning-step = <1>;
 	status = "okay";
 };
 
-- 
2.34.1