linux-kernel - Re: [PATCH v2 3/3] arm64: dts: qcom: milos-fairphone-fp6: Add vibrator support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <7c3646e4-48d3-4b32-93e4-69e7ce439e94@oss.qualcomm.com>
Date: Thu, 29 Jan 2026 11:18:07 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Griffin Kroah-Hartman <griffin.kroah@...rphone.com>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
 <conor+dt@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        Luca Weiss <luca.weiss@...rphone.com>
Cc: linux-input@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v2 3/3] arm64: dts: qcom: milos-fairphone-fp6: Add
 vibrator support

On 1/28/26 4:51 PM, Griffin Kroah-Hartman wrote:
> Add the required node for haptic playback (Awinic AW86938)
> 
> Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@...rphone.com>
> ---
>  arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> index 52895dd9e4fa117aef6822df230ebf644e5f02ba..881239d22fa97685206d1fa3a70723c5b77a339c 100644
> --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
> @@ -625,7 +625,17 @@ vreg_l7p: ldo7 {
>  	};
>  
>  	/* VL53L3 ToF @ 0x29 */
> -	/* AW86938FCR vibrator @ 0x5a */
> +
> +	vibrator@5a {
> +		compatible = "awinic,aw86938";
> +		reg = <0x5a>;
> +
> +		interrupts-extended = <&tlmm 80 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
> +
> +		pinctrl-0 = <&aw86938_int_default>;

Ideally there'd also be a config for the reset GPIO, but otherwise

Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>

Konrad