[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260130170416.49994-20-abbotti@mev.co.uk>
Date: Fri, 30 Jan 2026 16:47:44 +0000
From: Ian Abbott <abbotti@....co.uk>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ian Abbott <abbotti@....co.uk>,
H Hartley Sweeten <hsweeten@...ionengravers.com>
Subject: [PATCH 19/46] comedi: dt2801: Add sanity checks for I/O base address
The "dt2801" driver uses an admin-supplied configuration option
(`it->options[0]`) to configure the I/O port base address of a supported
board in the DT2801 family. It currently allows any base address to be
configured but the hardware only supports base addresses (configured by
an on-board DIP switch) in the range 0x200 to 0x3fe on 2-byte
boundaries.
Add a sanity check to ensure the device is not configured at an
unsupported base address.
Signed-off-by: Ian Abbott <abbotti@....co.uk>
---
drivers/comedi/drivers/dt2801.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/comedi/drivers/dt2801.c b/drivers/comedi/drivers/dt2801.c
index 230d25010f58..d790e69f98a0 100644
--- a/drivers/comedi/drivers/dt2801.c
+++ b/drivers/comedi/drivers/dt2801.c
@@ -540,7 +540,8 @@ static int dt2801_attach(struct comedi_device *dev, struct comedi_devconfig *it)
int ret = 0;
int n_ai_chans;
- ret = comedi_request_region(dev, it->options[0], 0x2);
+ ret = comedi_check_request_region(dev, it->options[0], 0x2,
+ 0x200, 0x3ff, 2);
if (ret)
return ret;
--
2.51.0
Powered by blists - more mailing lists