[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1769733972.git.daniel@makrotopia.org>
Date: Fri, 30 Jan 2026 00:48:57 +0000
From: Daniel Golle <daniel@...rotopia.org>
To: Hauke Mehrtens <hauke@...ke-m.de>, Andrew Lunn <andrew@...n.ch>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH net-next v2 0/3] net: dsa: mxl-gsw1xx: setup polarities and
validate chip
Now that common PHY properties make it easy to configure the SerDes RX
and TX polarities, use that for the SGMII/1000Base-X/2500Base-X PCS of
the MaxLinear GSW1xx switches.
Also, validate hardware in probe() function to make sure the switch is
actually present and MDIO communication works properly.
---
Changes since initial submission:
* use allOf to include phy-common-props in dt-schema
* use phy_get_manual_rx_polarity and phy_get_manual_tx_polarity helpers
instead of open-coding them
Daniel Golle (4):
net: dsa: mxl-gsw1xx: setup polarities and validate chip
dt-bindings: net: dsa: lantiq,gswip: reference common PHY properties
net: dsa: mxl-gsw1xx: configure PCS polarities
net: dsa: mxl-gsw1xx: validate chip ID
.../bindings/net/dsa/lantiq,gswip.yaml | 4 ++
drivers/net/dsa/lantiq/Kconfig | 1 +
drivers/net/dsa/lantiq/mxl-gsw1xx.c | 61 +++++++++++++++----
drivers/net/dsa/lantiq/mxl-gsw1xx.h | 9 +++
4 files changed, 64 insertions(+), 11 deletions(-)
--
2.52.0
Powered by blists - more mailing lists