[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260201191804.41421-1-heiko@sntech.de>
Date: Sun, 1 Feb 2026 20:18:00 +0100
From: Heiko Stuebner <heiko@...ech.de>
To: heiko@...ech.de
Cc: linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 0/4] Revision overlays for QNAP TSx33 devices
The QNAP NAS devices actually got device revisions at some point,
so there are different board variants in the wild.
Above certain PCB revisions, the devices gained additional GPIOs
for controlling individual power to the sata ports and also could
detect the presence via GPIOs.
They are not really necessary for normal functionality, as the PINs
start in a sane setting, but still it's nice to document things.
The overlays should be applied by the bootloader, where I have a
series pending to do this by reading the PCB ids from the EEPROMs.
Heiko Stuebner (4):
arm64: dts: rockchip: Add port subnodes to RK356x SATA controllers
arm64: dts: rockchip: add overlay for qnap-ts433 device revision
arm64: dts: rockchip: add overlay for qnap-ts233 device revision
arm64: dts: rockchip: add overlay for qnap-ts133 device revision
arch/arm64/boot/dts/rockchip/Makefile | 15 ++
.../rockchip/rk3566-qnap-ts133-pcb-13.dtso | 64 ++++++++
.../rockchip/rk3568-qnap-ts233-pcb-12-11.dtso | 93 +++++++++++
.../rockchip/rk3568-qnap-ts433-pcb-12-10.dtso | 151 ++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 27 +++-
5 files changed, 346 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-qnap-ts133-pcb-13.dtso
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233-pcb-12-11.dtso
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433-pcb-12-10.dtso
--
2.47.2
Powered by blists - more mailing lists