| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aYIrMqZ5yBfmy2AZ@lizhi-Precision-Tower-5810>
Date: Tue, 3 Feb 2026 12:06:58 -0500
From: Frank Li <Frank.li@....com>
To: Sherry Sun <sherry.sun@....com>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
s.hauer@...gutronix.de, festevam@...il.com, shawnguo@...nel.org,
daniel.baluta@....com, dario.binacchi@...rulasolutions.com,
alexander.stein@...tq-group.com, Markus.Niebel@...group.com,
matthias.schiffer@...group.com, y.moog@...tec.de,
josua@...id-run.com, francesco.dolcini@...adex.com,
primoz.fiser@...ik.com, imx@...ts.linux.dev, kernel@...gutronix.de,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH V5 3/5] arm64: dts: imx93: Move 11x11 EVK specific parts
back to imx93-11x11-evk.dts
On Tue, Feb 03, 2026 at 04:01:35PM +0800, Sherry Sun wrote:
> The previous patch renamed imx93-11x11-evk.dts to imx93-evk-common.dtsi
> to prepare for adding the i.MX93 Wireless EVK, which shares most of its
> design with the 11x11 EVK.
>
> This patch moves the board specific differences out of
Move ....
Frank
> imx93-evk-common.dtsi and back into imx93-11x11-evk.dts, ensuring that
> the common dtsi only contains the truly shared parts between the two EVK
> boards.
>
> No functional changes intended.
>
> Signed-off-by: Sherry Sun <sherry.sun@....com>
> ---
> .../boot/dts/freescale/imx93-11x11-evk.dts | 206 ++++++++++++++++++
> .../boot/dts/freescale/imx93-evk-common.dtsi | 198 -----------------
> 2 files changed, 206 insertions(+), 198 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index cca923f4ac7a..6b6d06c70af1 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -11,4 +11,210 @@
> / {
> model = "NXP i.MX93 11X11 EVK board";
> compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
> +
> + aliases {
> + mmc2 = &usdhc3;
> + };
> +
> + reg_m2_pwr: regulator-m2-pwr {
> + compatible = "regulator-fixed";
> + regulator-name = "M.2-power";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usdhc3_vmmc: regulator-usdhc3 {
> + compatible = "regulator-fixed";
> + regulator-name = "WLAN_EN";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <®_m2_pwr>;
> + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
> + /*
> + * IW612 wifi chip needs more delay than other wifi chips to complete
> + * the host interface initialization after power up, otherwise the
> + * internal state of IW612 may be unstable, resulting in the failure of
> + * the SDIO3.0 switch voltage.
> + */
> + startup-delay-us = <20000>;
> + enable-active-high;
> + };
> +
> + usdhc3_pwrseq: usdhc3_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
> + };
> +
> + bt_sco_codec: bt-sco-codec {
> + compatible = "linux,bt-sco";
> + #sound-dai-cells = <1>;
> + };
> +
> + sound-bt-sco {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "bt-sco-audio";
> + simple-audio-card,format = "dsp_a";
> + simple-audio-card,bitclock-inversion;
> + simple-audio-card,frame-master = <&btcpu>;
> + simple-audio-card,bitclock-master = <&btcpu>;
> +
> + btcpu: simple-audio-card,cpu {
> + sound-dai = <&sai1>;
> + dai-tdm-slot-num = <2>;
> + dai-tdm-slot-width = <16>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&bt_sco_codec 1>;
> + };
> + };
> +
> + sound-micfil {
> + compatible = "fsl,imx-audio-card";
> + model = "micfil-audio";
> +
> + pri-dai-link {
> + link-name = "micfil hifi";
> + format = "i2s";
> +
> + cpu {
> + sound-dai = <&micfil>;
> + };
> + };
> + };
> +};
> +
> +&micfil {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_pdm>;
> + pinctrl-1 = <&pinctrl_pdm_sleep>;
> + assigned-clocks = <&clk IMX93_CLK_PDM>;
> + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> + assigned-clock-rates = <49152000>;
> + status = "okay";
> +};
> +
> +&pcal6524 {
> + m2-pcm-level-shifter-hog {
> + gpio-hog;
> + gpios = <19 GPIO_ACTIVE_HIGH>;
> + output-high;
> + };
> +};
> +
> +&sai1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_sai1>;
> + pinctrl-1 = <&pinctrl_sai1_sleep>;
> + assigned-clocks = <&clk IMX93_CLK_SAI1>;
> + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> + assigned-clock-rates = <12288000>;
> + fsl,sai-mclk-direction-output;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
> + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
> + mmc-pwrseq = <&usdhc3_pwrseq>;
> + vmmc-supply = <®_usdhc3_vmmc>;
> + bus-width = <4>;
> + keep-power-in-suspend;
> + non-removable;
> + wakeup-source;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_pdm: pdmgrp {
> + fsl,pins = <
> + MX93_PAD_PDM_CLK__PDM_CLK 0x31e
> + MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e
> + MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e
> + >;
> + };
> +
> + pinctrl_pdm_sleep: pdmsleepgrp {
> + fsl,pins = <
> + MX93_PAD_PDM_CLK__GPIO1_IO08 0x31e
> + MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x31e
> + MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
> + >;
> + };
> +
> + pinctrl_sai1: sai1grp {
> + fsl,pins = <
> + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
> + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
> + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e
> + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e
> + >;
> + };
> +
> + pinctrl_sai1_sleep: sai1sleepgrp {
> + fsl,pins = <
> + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x51e
> + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x51e
> + MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x51e
> + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x51e
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
> + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
> + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
> + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
> + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
> + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> + fsl,pins = <
> + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
> + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
> + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
> + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
> + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
> + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
> + >;
> + };
> +
> + /* need to config the SION for data and cmd pad, refer to ERR052021 */
> + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> + fsl,pins = <
> + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
> + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
> + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
> + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
> + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
> + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
> + >;
> + };
> +
> + pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
> + fsl,pins = <
> + MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
> + MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
> + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
> + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
> + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
> + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc3_wlan: usdhc3wlangrp {
> + fsl,pins = <
> + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
> + >;
> + };
> };
> diff --git a/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi b/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi
> index 6279b8eb4ea7..301e9f05122e 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi
> @@ -107,15 +107,6 @@ reg_audio_pwr: regulator-audio-pwr {
> enable-active-high;
> };
>
> - reg_m2_pwr: regulator-m2-pwr {
> - compatible = "regulator-fixed";
> - regulator-name = "M.2-power";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - };
> -
> reg_usdhc2_vmmc: regulator-usdhc2 {
> compatible = "regulator-fixed";
> pinctrl-names = "default";
> @@ -128,28 +119,6 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> enable-active-high;
> };
>
> - reg_usdhc3_vmmc: regulator-usdhc3 {
> - compatible = "regulator-fixed";
> - regulator-name = "WLAN_EN";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <®_m2_pwr>;
> - gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
> - /*
> - * IW612 wifi chip needs more delay than other wifi chips to complete
> - * the host interface initialization after power up, otherwise the
> - * internal state of IW612 may be unstable, resulting in the failure of
> - * the SDIO3.0 switch voltage.
> - */
> - startup-delay-us = <20000>;
> - enable-active-high;
> - };
> -
> - usdhc3_pwrseq: usdhc3_pwrseq {
> - compatible = "mmc-pwrseq-simple";
> - reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
> - };
> -
> backlight_lvds: backlight-lvds {
> compatible = "pwm-backlight";
> pwms = <&adp5585 0 100000 0>;
> @@ -161,44 +130,6 @@ backlight_lvds: backlight-lvds {
> status = "disabled";
> };
>
> - bt_sco_codec: bt-sco-codec {
> - compatible = "linux,bt-sco";
> - #sound-dai-cells = <1>;
> - };
> -
> - sound-bt-sco {
> - compatible = "simple-audio-card";
> - simple-audio-card,name = "bt-sco-audio";
> - simple-audio-card,format = "dsp_a";
> - simple-audio-card,bitclock-inversion;
> - simple-audio-card,frame-master = <&btcpu>;
> - simple-audio-card,bitclock-master = <&btcpu>;
> -
> - btcpu: simple-audio-card,cpu {
> - sound-dai = <&sai1>;
> - dai-tdm-slot-num = <2>;
> - dai-tdm-slot-width = <16>;
> - };
> -
> - simple-audio-card,codec {
> - sound-dai = <&bt_sco_codec 1>;
> - };
> - };
> -
> - sound-micfil {
> - compatible = "fsl,imx-audio-card";
> - model = "micfil-audio";
> -
> - pri-dai-link {
> - link-name = "micfil hifi";
> - format = "i2s";
> -
> - cpu {
> - sound-dai = <&micfil>;
> - };
> - };
> - };
> -
> sound-wm8962 {
> compatible = "fsl,imx-audio-wm8962";
> model = "wm8962-audio";
> @@ -350,12 +281,6 @@ pcal6524: gpio@22 {
> #interrupt-cells = <2>;
> interrupt-parent = <&gpio3>;
> interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> -
> - m2-pcm-level-shifter-hog {
> - gpio-hog;
> - gpios = <19 GPIO_ACTIVE_HIGH>;
> - output-high;
> - };
> };
>
> pmic@25 {
> @@ -548,16 +473,6 @@ bluetooth {
> };
> };
>
> -&micfil {
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&pinctrl_pdm>;
> - pinctrl-1 = <&pinctrl_pdm_sleep>;
> - assigned-clocks = <&clk IMX93_CLK_PDM>;
> - assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> - assigned-clock-rates = <49152000>;
> - status = "okay";
> -};
> -
> &mu1 {
> status = "okay";
> };
> @@ -566,17 +481,6 @@ &mu2 {
> status = "okay";
> };
>
> -&sai1 {
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&pinctrl_sai1>;
> - pinctrl-1 = <&pinctrl_sai1_sleep>;
> - assigned-clocks = <&clk IMX93_CLK_SAI1>;
> - assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> - assigned-clock-rates = <12288000>;
> - fsl,sai-mclk-direction-output;
> - status = "okay";
> -};
> -
> &sai3 {
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&pinctrl_sai3>;
> @@ -647,21 +551,6 @@ &usdhc2 {
> no-mmc;
> };
>
> -&usdhc3 {
> - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> - pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
> - pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
> - pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
> - pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
> - mmc-pwrseq = <&usdhc3_pwrseq>;
> - vmmc-supply = <®_usdhc3_vmmc>;
> - bus-width = <4>;
> - keep-power-in-suspend;
> - non-removable;
> - wakeup-source;
> - status = "okay";
> -};
> -
> &wdog3 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_wdog>;
> @@ -808,40 +697,6 @@ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
> >;
> };
>
> - pinctrl_pdm: pdmgrp {
> - fsl,pins = <
> - MX93_PAD_PDM_CLK__PDM_CLK 0x31e
> - MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e
> - MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e
> - >;
> - };
> -
> - pinctrl_pdm_sleep: pdmsleepgrp {
> - fsl,pins = <
> - MX93_PAD_PDM_CLK__GPIO1_IO08 0x31e
> - MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x31e
> - MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
> - >;
> - };
> -
> - pinctrl_sai1: sai1grp {
> - fsl,pins = <
> - MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
> - MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
> - MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e
> - MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e
> - >;
> - };
> -
> - pinctrl_sai1_sleep: sai1sleepgrp {
> - fsl,pins = <
> - MX93_PAD_SAI1_TXC__GPIO1_IO12 0x51e
> - MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x51e
> - MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x51e
> - MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x51e
> - >;
> - };
> -
> /* need to config the SION for data and cmd pad, refer to ERR052021 */
> pinctrl_usdhc1: usdhc1grp {
> fsl,pins = <
> @@ -996,59 +851,6 @@ MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
> >;
> };
>
> - /* need to config the SION for data and cmd pad, refer to ERR052021 */
> - pinctrl_usdhc3: usdhc3grp {
> - fsl,pins = <
> - MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
> - MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
> - MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
> - MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
> - MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
> - MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
> - >;
> - };
> -
> - /* need to config the SION for data and cmd pad, refer to ERR052021 */
> - pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> - fsl,pins = <
> - MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
> - MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
> - MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
> - MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
> - MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
> - MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
> - >;
> - };
> -
> - /* need to config the SION for data and cmd pad, refer to ERR052021 */
> - pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> - fsl,pins = <
> - MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
> - MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
> - MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
> - MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
> - MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
> - MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
> - >;
> - };
> -
> - pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
> - fsl,pins = <
> - MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
> - MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
> - MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
> - MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
> - MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
> - MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
> - >;
> - };
> -
> - pinctrl_usdhc3_wlan: usdhc3wlangrp {
> - fsl,pins = <
> - MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
> - >;
> - };
> -
> pinctrl_wdog: wdoggrp {
> fsl,pins = <
> MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
> --
> 2.37.1
>
Powered by blists - more mailing lists