[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aYG2ostrecBVuMPs@tom-desktop>
Date: Tue, 3 Feb 2026 09:49:38 +0100
From: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
To: "Rob Herring (Arm)" <robh@...nel.org>
Cc: devicetree@...r.kernel.org, biju.das.jz@...renesas.com,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-kernel@...r.kernel.org, Magnus Damm <magnus.damm@...il.com>,
linux-renesas-soc@...r.kernel.org,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, tomm.merciai@...il.com,
Krzysztof Kozlowski <krzysztof.kozlowski@....qualcomm.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: Re: [PATCH v7 1/4] dt-bindings: reset: renesas,rzv2h-usb2phy: Add
'#mux-state-cells' property
Hi Rob,
On Thu, Jan 29, 2026 at 12:42:11PM -0600, Rob Herring (Arm) wrote:
>
> On Thu, 29 Jan 2026 17:52:55 +0100, Tommaso Merciai wrote:
> > Add the '#mux-state-cells' property to support describing the USB VBUS_SEL
> > multiplexer as a mux-controller in the Renesas RZ/V2H(P) USB2PHY binding.
> >
> > The mux-controller cannot be integrated into the parent USB2PHY node
> > because the VBUS source selector is part of a separate hardware block,
> > not the USB2PHY block itself.
> >
> > This is required to properly configure USB PHY power selection on
> > RZ/V2H(P) and RZ/G3E SoCs.
> >
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@....qualcomm.com>
> > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
> > ---
> > v6->v7:
> > - No changes
> >
> > v5->v6:
> > - Collected KKrzysztof tag
> >
> > v4->v5:
> > - No changes
> >
> > v3->v4:
> > - Switch back to v2 implementation.
> > - Improve commit body.
> >
> > v2->v3:
> > - Manipulate mux-controller as an internal node.
> > - Improved commit body.
> >
> > v1->v2:
> > - New patch
> >
> > .../bindings/reset/renesas,rzv2h-usb2phy-reset.yaml | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.example.dtb: reset-controller@...30000 (renesas,r9a09g057-usb2phy-reset): $nodename:0: 'reset-controller@...30000' does not match '^mux-controller(@.*|-([0-9]|[1-9][0-9]+))?$'
> from schema $id: http://devicetree.org/schemas/mux/mux-controller.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.kernel.org/project/devicetree/patch/af75145b08e24034dcf367932002079363e5dd81.1769704000.git.tommaso.merciai.xr@bp.renesas.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>
This series depends on related mux series [0].
Was splitted the series into per subsystem series for easy merging.
[0] https://lore.kernel.org/all/cover.1769703480.git.tommaso.merciai.xr@bp.renesas.com/
Thanks & Regards,
Tommaso
Powered by blists - more mailing lists