| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<VI0PR04MB12114075B2F1E223F2BD596139298A@VI0PR04MB12114.eurprd04.prod.outlook.com>
Date: Wed, 4 Feb 2026 02:00:34 +0000
From: Sherry Sun <sherry.sun@....com>
To: Frank Li <frank.li@....com>
CC: "robh@...nel.org" <robh@...nel.org>, "krzk+dt@...nel.org"
<krzk+dt@...nel.org>, "conor+dt@...nel.org" <conor+dt@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>, "festevam@...il.com"
<festevam@...il.com>, "shawnguo@...nel.org" <shawnguo@...nel.org>, Daniel
Baluta <daniel.baluta@....com>, "dario.binacchi@...rulasolutions.com"
<dario.binacchi@...rulasolutions.com>, "alexander.stein@...tq-group.com"
<alexander.stein@...tq-group.com>, "Markus.Niebel@...group.com"
<Markus.Niebel@...group.com>, "matthias.schiffer@...group.com"
<matthias.schiffer@...group.com>, "y.moog@...tec.de" <y.moog@...tec.de>,
"josua@...id-run.com" <josua@...id-run.com>, Francesco Dolcini
<francesco.dolcini@...adex.com>, "primoz.fiser@...ik.com"
<primoz.fiser@...ik.com>, "imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"kernel@...gutronix.de" <kernel@...gutronix.de>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH V5 3/5] arm64: dts: imx93: Move 11x11 EVK specific parts
back to imx93-11x11-evk.dts
> Subject: Re: [PATCH V5 3/5] arm64: dts: imx93: Move 11x11 EVK specific parts
> back to imx93-11x11-evk.dts
>
> On Tue, Feb 03, 2026 at 04:01:35PM +0800, Sherry Sun wrote:
> > The previous patch renamed imx93-11x11-evk.dts to
> > imx93-evk-common.dtsi to prepare for adding the i.MX93 Wireless EVK,
> > which shares most of its design with the 11x11 EVK.
> >
> > This patch moves the board specific differences out of
>
> Move ....
>
Thanks, will fix it.
Best Regards
Sherry
> Frank
>
> > imx93-evk-common.dtsi and back into imx93-11x11-evk.dts, ensuring that
> > the common dtsi only contains the truly shared parts between the two
> > EVK boards.
> >
> > No functional changes intended.
> >
> > Signed-off-by: Sherry Sun <sherry.sun@....com>
> > ---
> > .../boot/dts/freescale/imx93-11x11-evk.dts | 206 ++++++++++++++++++
> > .../boot/dts/freescale/imx93-evk-common.dtsi | 198 -----------------
> > 2 files changed, 206 insertions(+), 198 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > index cca923f4ac7a..6b6d06c70af1 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> > @@ -11,4 +11,210 @@
> > / {
> > model = "NXP i.MX93 11X11 EVK board";
> > compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
> > +
> > + aliases {
> > + mmc2 = &usdhc3;
> > + };
> > +
> > + reg_m2_pwr: regulator-m2-pwr {
> > + compatible = "regulator-fixed";
> > + regulator-name = "M.2-power";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +
> > + reg_usdhc3_vmmc: regulator-usdhc3 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "WLAN_EN";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + vin-supply = <®_m2_pwr>;
> > + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
> > + /*
> > + * IW612 wifi chip needs more delay than other wifi chips to
> complete
> > + * the host interface initialization after power up, otherwise
> the
> > + * internal state of IW612 may be unstable, resulting in the
> failure of
> > + * the SDIO3.0 switch voltage.
> > + */
> > + startup-delay-us = <20000>;
> > + enable-active-high;
> > + };
> > +
> > + usdhc3_pwrseq: usdhc3_pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + bt_sco_codec: bt-sco-codec {
> > + compatible = "linux,bt-sco";
> > + #sound-dai-cells = <1>;
> > + };
> > +
> > + sound-bt-sco {
> > + compatible = "simple-audio-card";
> > + simple-audio-card,name = "bt-sco-audio";
> > + simple-audio-card,format = "dsp_a";
> > + simple-audio-card,bitclock-inversion;
> > + simple-audio-card,frame-master = <&btcpu>;
> > + simple-audio-card,bitclock-master = <&btcpu>;
> > +
> > + btcpu: simple-audio-card,cpu {
> > + sound-dai = <&sai1>;
> > + dai-tdm-slot-num = <2>;
> > + dai-tdm-slot-width = <16>;
> > + };
> > +
> > + simple-audio-card,codec {
> > + sound-dai = <&bt_sco_codec 1>;
> > + };
> > + };
> > +
> > + sound-micfil {
> > + compatible = "fsl,imx-audio-card";
> > + model = "micfil-audio";
> > +
> > + pri-dai-link {
> > + link-name = "micfil hifi";
> > + format = "i2s";
> > +
> > + cpu {
> > + sound-dai = <&micfil>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&micfil {
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&pinctrl_pdm>;
> > + pinctrl-1 = <&pinctrl_pdm_sleep>;
> > + assigned-clocks = <&clk IMX93_CLK_PDM>;
> > + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> > + assigned-clock-rates = <49152000>;
> > + status = "okay";
> > +};
> > +
> > +&pcal6524 {
> > + m2-pcm-level-shifter-hog {
> > + gpio-hog;
> > + gpios = <19 GPIO_ACTIVE_HIGH>;
> > + output-high;
> > + };
> > +};
> > +
> > +&sai1 {
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&pinctrl_sai1>;
> > + pinctrl-1 = <&pinctrl_sai1_sleep>;
> > + assigned-clocks = <&clk IMX93_CLK_SAI1>;
> > + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> > + assigned-clock-rates = <12288000>;
> > + fsl,sai-mclk-direction-output;
> > + status = "okay";
> > +};
> > +
> > +&usdhc3 {
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> > + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
> > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
> > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
> > + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
> > + mmc-pwrseq = <&usdhc3_pwrseq>;
> > + vmmc-supply = <®_usdhc3_vmmc>;
> > + bus-width = <4>;
> > + keep-power-in-suspend;
> > + non-removable;
> > + wakeup-source;
> > + status = "okay";
> > +};
> > +
> > +&iomuxc {
> > + pinctrl_pdm: pdmgrp {
> > + fsl,pins = <
> > + MX93_PAD_PDM_CLK__PDM_CLK
> 0x31e
> > +
> MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e
> > +
> MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e
> > + >;
> > + };
> > +
> > + pinctrl_pdm_sleep: pdmsleepgrp {
> > + fsl,pins = <
> > + MX93_PAD_PDM_CLK__GPIO1_IO08
> 0x31e
> > + MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09
> 0x31e
> > + MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10
> 0x31e
> > + >;
> > + };
> > +
> > + pinctrl_sai1: sai1grp {
> > + fsl,pins = <
> > + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK
> 0x31e
> > + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
> > + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00
> 0x31e
> > + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00
> 0x31e
> > + >;
> > + };
> > +
> > + pinctrl_sai1_sleep: sai1sleepgrp {
> > + fsl,pins = <
> > + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x51e
> > + MX93_PAD_SAI1_TXFS__GPIO1_IO11
> 0x51e
> > + MX93_PAD_SAI1_TXD0__GPIO1_IO13
> 0x51e
> > + MX93_PAD_SAI1_RXD0__GPIO1_IO14
> 0x51e
> > + >;
> > + };
> > +
> > + /* need to config the SION for data and cmd pad, refer to ERR052021
> */
> > + pinctrl_usdhc3: usdhc3grp {
> > + fsl,pins = <
> > + MX93_PAD_SD3_CLK__USDHC3_CLK
> 0x1582
> > + MX93_PAD_SD3_CMD__USDHC3_CMD
> 0x40001382
> > + MX93_PAD_SD3_DATA0__USDHC3_DATA0
> 0x40001382
> > + MX93_PAD_SD3_DATA1__USDHC3_DATA1
> 0x40001382
> > + MX93_PAD_SD3_DATA2__USDHC3_DATA2
> 0x40001382
> > + MX93_PAD_SD3_DATA3__USDHC3_DATA3
> 0x40001382
> > + >;
> > + };
> > +
> > + /* need to config the SION for data and cmd pad, refer to ERR052021
> */
> > + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> > + fsl,pins = <
> > + MX93_PAD_SD3_CLK__USDHC3_CLK
> 0x158e
> > + MX93_PAD_SD3_CMD__USDHC3_CMD
> 0x4000138e
> > + MX93_PAD_SD3_DATA0__USDHC3_DATA0
> 0x4000138e
> > + MX93_PAD_SD3_DATA1__USDHC3_DATA1
> 0x4000138e
> > + MX93_PAD_SD3_DATA2__USDHC3_DATA2
> 0x4000138e
> > + MX93_PAD_SD3_DATA3__USDHC3_DATA3
> 0x4000138e
> > + >;
> > + };
> > +
> > + /* need to config the SION for data and cmd pad, refer to ERR052021
> */
> > + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> > + fsl,pins = <
> > + MX93_PAD_SD3_CLK__USDHC3_CLK
> 0x15fe
> > + MX93_PAD_SD3_CMD__USDHC3_CMD
> 0x400013fe
> > + MX93_PAD_SD3_DATA0__USDHC3_DATA0
> 0x400013fe
> > + MX93_PAD_SD3_DATA1__USDHC3_DATA1
> 0x400013fe
> > + MX93_PAD_SD3_DATA2__USDHC3_DATA2
> 0x400013fe
> > + MX93_PAD_SD3_DATA3__USDHC3_DATA3
> 0x400013fe
> > + >;
> > + };
> > +
> > + pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
> > + fsl,pins = <
> > + MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
> > + MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
> > + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
> > + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
> > + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
> > + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
> > + >;
> > + };
> > +
> > + pinctrl_usdhc3_wlan: usdhc3wlangrp {
> > + fsl,pins = <
> > + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
> > + >;
> > + };
> > };
> > diff --git a/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi
> > b/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi
> > index 6279b8eb4ea7..301e9f05122e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx93-evk-common.dtsi
> > @@ -107,15 +107,6 @@ reg_audio_pwr: regulator-audio-pwr {
> > enable-active-high;
> > };
> >
> > - reg_m2_pwr: regulator-m2-pwr {
> > - compatible = "regulator-fixed";
> > - regulator-name = "M.2-power";
> > - regulator-min-microvolt = <3300000>;
> > - regulator-max-microvolt = <3300000>;
> > - gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
> > - enable-active-high;
> > - };
> > -
> > reg_usdhc2_vmmc: regulator-usdhc2 {
> > compatible = "regulator-fixed";
> > pinctrl-names = "default";
> > @@ -128,28 +119,6 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> > enable-active-high;
> > };
> >
> > - reg_usdhc3_vmmc: regulator-usdhc3 {
> > - compatible = "regulator-fixed";
> > - regulator-name = "WLAN_EN";
> > - regulator-min-microvolt = <3300000>;
> > - regulator-max-microvolt = <3300000>;
> > - vin-supply = <®_m2_pwr>;
> > - gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
> > - /*
> > - * IW612 wifi chip needs more delay than other wifi chips to
> complete
> > - * the host interface initialization after power up, otherwise
> the
> > - * internal state of IW612 may be unstable, resulting in the
> failure of
> > - * the SDIO3.0 switch voltage.
> > - */
> > - startup-delay-us = <20000>;
> > - enable-active-high;
> > - };
> > -
> > - usdhc3_pwrseq: usdhc3_pwrseq {
> > - compatible = "mmc-pwrseq-simple";
> > - reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
> > - };
> > -
> > backlight_lvds: backlight-lvds {
> > compatible = "pwm-backlight";
> > pwms = <&adp5585 0 100000 0>;
> > @@ -161,44 +130,6 @@ backlight_lvds: backlight-lvds {
> > status = "disabled";
> > };
> >
> > - bt_sco_codec: bt-sco-codec {
> > - compatible = "linux,bt-sco";
> > - #sound-dai-cells = <1>;
> > - };
> > -
> > - sound-bt-sco {
> > - compatible = "simple-audio-card";
> > - simple-audio-card,name = "bt-sco-audio";
> > - simple-audio-card,format = "dsp_a";
> > - simple-audio-card,bitclock-inversion;
> > - simple-audio-card,frame-master = <&btcpu>;
> > - simple-audio-card,bitclock-master = <&btcpu>;
> > -
> > - btcpu: simple-audio-card,cpu {
> > - sound-dai = <&sai1>;
> > - dai-tdm-slot-num = <2>;
> > - dai-tdm-slot-width = <16>;
> > - };
> > -
> > - simple-audio-card,codec {
> > - sound-dai = <&bt_sco_codec 1>;
> > - };
> > - };
> > -
> > - sound-micfil {
> > - compatible = "fsl,imx-audio-card";
> > - model = "micfil-audio";
> > -
> > - pri-dai-link {
> > - link-name = "micfil hifi";
> > - format = "i2s";
> > -
> > - cpu {
> > - sound-dai = <&micfil>;
> > - };
> > - };
> > - };
> > -
> > sound-wm8962 {
> > compatible = "fsl,imx-audio-wm8962";
> > model = "wm8962-audio";
> > @@ -350,12 +281,6 @@ pcal6524: gpio@22 {
> > #interrupt-cells = <2>;
> > interrupt-parent = <&gpio3>;
> > interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> > -
> > - m2-pcm-level-shifter-hog {
> > - gpio-hog;
> > - gpios = <19 GPIO_ACTIVE_HIGH>;
> > - output-high;
> > - };
> > };
> >
> > pmic@25 {
> > @@ -548,16 +473,6 @@ bluetooth {
> > };
> > };
> >
> > -&micfil {
> > - pinctrl-names = "default", "sleep";
> > - pinctrl-0 = <&pinctrl_pdm>;
> > - pinctrl-1 = <&pinctrl_pdm_sleep>;
> > - assigned-clocks = <&clk IMX93_CLK_PDM>;
> > - assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> > - assigned-clock-rates = <49152000>;
> > - status = "okay";
> > -};
> > -
> > &mu1 {
> > status = "okay";
> > };
> > @@ -566,17 +481,6 @@ &mu2 {
> > status = "okay";
> > };
> >
> > -&sai1 {
> > - pinctrl-names = "default", "sleep";
> > - pinctrl-0 = <&pinctrl_sai1>;
> > - pinctrl-1 = <&pinctrl_sai1_sleep>;
> > - assigned-clocks = <&clk IMX93_CLK_SAI1>;
> > - assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
> > - assigned-clock-rates = <12288000>;
> > - fsl,sai-mclk-direction-output;
> > - status = "okay";
> > -};
> > -
> > &sai3 {
> > pinctrl-names = "default", "sleep";
> > pinctrl-0 = <&pinctrl_sai3>;
> > @@ -647,21 +551,6 @@ &usdhc2 {
> > no-mmc;
> > };
> >
> > -&usdhc3 {
> > - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> > - pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
> > - pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
> > - pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
> > - pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
> > - mmc-pwrseq = <&usdhc3_pwrseq>;
> > - vmmc-supply = <®_usdhc3_vmmc>;
> > - bus-width = <4>;
> > - keep-power-in-suspend;
> > - non-removable;
> > - wakeup-source;
> > - status = "okay";
> > -};
> > -
> > &wdog3 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_wdog>;
> > @@ -808,40 +697,6 @@ MX93_PAD_CCM_CLKO2__GPIO3_IO27
> 0x31e
> > >;
> > };
> >
> > - pinctrl_pdm: pdmgrp {
> > - fsl,pins = <
> > - MX93_PAD_PDM_CLK__PDM_CLK
> 0x31e
> > -
> MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e
> > -
> MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e
> > - >;
> > - };
> > -
> > - pinctrl_pdm_sleep: pdmsleepgrp {
> > - fsl,pins = <
> > - MX93_PAD_PDM_CLK__GPIO1_IO08
> 0x31e
> > - MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09
> 0x31e
> > - MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10
> 0x31e
> > - >;
> > - };
> > -
> > - pinctrl_sai1: sai1grp {
> > - fsl,pins = <
> > - MX93_PAD_SAI1_TXC__SAI1_TX_BCLK
> 0x31e
> > - MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
> > - MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00
> 0x31e
> > - MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00
> 0x31e
> > - >;
> > - };
> > -
> > - pinctrl_sai1_sleep: sai1sleepgrp {
> > - fsl,pins = <
> > - MX93_PAD_SAI1_TXC__GPIO1_IO12 0x51e
> > - MX93_PAD_SAI1_TXFS__GPIO1_IO11
> 0x51e
> > - MX93_PAD_SAI1_TXD0__GPIO1_IO13
> 0x51e
> > - MX93_PAD_SAI1_RXD0__GPIO1_IO14
> 0x51e
> > - >;
> > - };
> > -
> > /* need to config the SION for data and cmd pad, refer to ERR052021
> */
> > pinctrl_usdhc1: usdhc1grp {
> > fsl,pins = <
> > @@ -996,59 +851,6 @@ MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
> > >;
> > };
> >
> > - /* need to config the SION for data and cmd pad, refer to ERR052021
> */
> > - pinctrl_usdhc3: usdhc3grp {
> > - fsl,pins = <
> > - MX93_PAD_SD3_CLK__USDHC3_CLK
> 0x1582
> > - MX93_PAD_SD3_CMD__USDHC3_CMD
> 0x40001382
> > - MX93_PAD_SD3_DATA0__USDHC3_DATA0
> 0x40001382
> > - MX93_PAD_SD3_DATA1__USDHC3_DATA1
> 0x40001382
> > - MX93_PAD_SD3_DATA2__USDHC3_DATA2
> 0x40001382
> > - MX93_PAD_SD3_DATA3__USDHC3_DATA3
> 0x40001382
> > - >;
> > - };
> > -
> > - /* need to config the SION for data and cmd pad, refer to ERR052021
> */
> > - pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> > - fsl,pins = <
> > - MX93_PAD_SD3_CLK__USDHC3_CLK
> 0x158e
> > - MX93_PAD_SD3_CMD__USDHC3_CMD
> 0x4000138e
> > - MX93_PAD_SD3_DATA0__USDHC3_DATA0
> 0x4000138e
> > - MX93_PAD_SD3_DATA1__USDHC3_DATA1
> 0x4000138e
> > - MX93_PAD_SD3_DATA2__USDHC3_DATA2
> 0x4000138e
> > - MX93_PAD_SD3_DATA3__USDHC3_DATA3
> 0x4000138e
> > - >;
> > - };
> > -
> > - /* need to config the SION for data and cmd pad, refer to ERR052021
> */
> > - pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> > - fsl,pins = <
> > - MX93_PAD_SD3_CLK__USDHC3_CLK
> 0x15fe
> > - MX93_PAD_SD3_CMD__USDHC3_CMD
> 0x400013fe
> > - MX93_PAD_SD3_DATA0__USDHC3_DATA0
> 0x400013fe
> > - MX93_PAD_SD3_DATA1__USDHC3_DATA1
> 0x400013fe
> > - MX93_PAD_SD3_DATA2__USDHC3_DATA2
> 0x400013fe
> > - MX93_PAD_SD3_DATA3__USDHC3_DATA3
> 0x400013fe
> > - >;
> > - };
> > -
> > - pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
> > - fsl,pins = <
> > - MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
> > - MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
> > - MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
> > - MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
> > - MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
> > - MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
> > - >;
> > - };
> > -
> > - pinctrl_usdhc3_wlan: usdhc3wlangrp {
> > - fsl,pins = <
> > - MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
> > - >;
> > - };
> > -
> > pinctrl_wdog: wdoggrp {
> > fsl,pins = <
> > MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY
> 0x31e
> > --
> > 2.37.1
> >
Powered by blists - more mailing lists