| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260204-net-mptcp-misc-fixes-6-19-rc8-v1-1-cb559fb6b50a@kernel.org>
Date: Wed, 04 Feb 2026 17:57:25 +0100
From: "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
To: Mat Martineau <martineau@...nel.org>, Geliang Tang <geliang@...nel.org>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Simon Horman <horms@...nel.org>, Shuah Khan <shuah@...nel.org>
Cc: netdev@...r.kernel.org, mptcp@...ts.linux.dev,
linux-kernel@...r.kernel.org, linux-kselftest@...r.kernel.org,
"Matthieu Baerts (NGI0)" <matttbe@...nel.org>, stable@...r.kernel.org,
syzbot+f56f7d56e2c6e11a01b6@...kaller.appspotmail.com
Subject: [PATCH net 1/4] mptcp: pm: in-kernel: always set ID as avail when
rm endp
Syzkaller managed to find a combination of actions that was generating
this warning:
WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535
Modules linked in:
CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline]
RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline]
RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline]
RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538
Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89
RSP: 0018:ffffc9001535b820 EFLAGS: 00010287
netdevsim0: tun_chr_ioctl cmd 1074025677
RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7
netdevsim0: linktype set to 823
RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff
R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800
FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000
netlink: 'syz.3.50': attribute type 5 has an invalid length.
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'.
CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0
Call Trace:
<TASK>
mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline]
mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:733
____sys_sendmsg+0x272/0x3b0 net/socket.c:2608
___sys_sendmsg+0x2de/0x320 net/socket.c:2662
__sys_sendmsg net/socket.c:2694 [inline]
__do_sys_sendmsg net/socket.c:2699 [inline]
__se_sys_sendmsg net/socket.c:2697 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6adb66f6d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d
RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
netlink: 'syz.5.51': attribute type 2 has an invalid length.
R13: 00007fff25e91fe0 R14: 00007fc6ac5a7ce4 R15: 00007fff25e920d7
</TASK>
The actions that caused that seem to be:
- Create an MPTCP endpoint for address A without any flags
- Create a new MPTCP connection from address A
- Remove the MPTCP endpoint: the corresponding subflows will be removed
- Recreate the endpoint with the same ID, but with the subflow flag
- Change the same endpoint to add the fullmesh flag
In this case, msk->pm.local_addr_used has been decremented, but the
corresponding bit in msk->pm.id_avail_bitmap has not been reset.
When removing an endpoint, the corresponding endpoint ID was only marked
as available for "signal" types with an announced address, plus all
"subflow" types, but not the other types like an endpoint corresponding
to the initial subflow. In these cases, re-creating an endpoint with the
same ID didn't signal/create anything. Here, adding the fullmesh flag
was creating the splat when calling __mark_subflow_endp_available() from
mptcp_pm_nl_fullmesh(), because msk->pm.local_addr_used was set to 0
while the ID was marked as used.
To fix this issue, the corresponding bit in msk->pm.id_avail_bitmap can
always be set as available when removing an MPTCP in-kernel endpoint. In
other words, moving the call to __set_bit() to do it in all cases,
except for "subflow" types where this bit is handled in a dedicated
helper.
Note: instead of adding a new spin_(un)lock_bh that would be taken in
all cases, do all the actions requiring the spin lock under the same
block.
This modification potentially fixes another issue reported by syzbot,
see [1]. But without a reproducer or more details about what exactly
happened before, it is hard to confirm.
Fixes: e255683c06df ("mptcp: pm: re-using ID of unused removed ADD_ADDR")
Cc: stable@...r.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/606
Reported-by: syzbot+f56f7d56e2c6e11a01b6@...kaller.appspotmail.com
Closes: https://lore.kernel.org/68fcfc4a.050a0220.346f24.02fb.GAE@google.com [1]
Reviewed-by: Mat Martineau <martineau@...nel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@...nel.org>
---
net/mptcp/pm_kernel.c | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/net/mptcp/pm_kernel.c b/net/mptcp/pm_kernel.c
index b26675054b0d..4972c19fc73e 100644
--- a/net/mptcp/pm_kernel.c
+++ b/net/mptcp/pm_kernel.c
@@ -1056,10 +1056,8 @@ static bool mptcp_pm_remove_anno_addr(struct mptcp_sock *msk,
ret = mptcp_remove_anno_list_by_saddr(msk, addr);
if (ret || force) {
spin_lock_bh(&msk->pm.lock);
- if (ret) {
- __set_bit(addr->id, msk->pm.id_avail_bitmap);
+ if (ret)
msk->pm.add_addr_signaled--;
- }
mptcp_pm_remove_addr(msk, &list);
spin_unlock_bh(&msk->pm.lock);
}
@@ -1097,17 +1095,15 @@ static int mptcp_nl_remove_subflow_and_signal_addr(struct net *net,
!(entry->flags & MPTCP_PM_ADDR_FLAG_IMPLICIT));
list.ids[0] = mptcp_endp_get_local_id(msk, addr);
- if (remove_subflow) {
- spin_lock_bh(&msk->pm.lock);
- mptcp_pm_rm_subflow(msk, &list);
- spin_unlock_bh(&msk->pm.lock);
- }
- if (entry->flags & MPTCP_PM_ADDR_FLAG_SUBFLOW) {
- spin_lock_bh(&msk->pm.lock);
+ spin_lock_bh(&msk->pm.lock);
+ if (remove_subflow)
+ mptcp_pm_rm_subflow(msk, &list);
+ if (entry->flags & MPTCP_PM_ADDR_FLAG_SUBFLOW)
__mark_subflow_endp_available(msk, list.ids[0]);
- spin_unlock_bh(&msk->pm.lock);
- }
+ else /* mark endp ID as available, e.g. Signal or MPC endp */
+ __set_bit(addr->id, msk->pm.id_avail_bitmap);
+ spin_unlock_bh(&msk->pm.lock);
if (msk->mpc_endpoint_id == entry->addr.id)
msk->mpc_endpoint_id = 0;
--
2.51.0
Powered by blists - more mailing lists