lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <u7doih67vqljroq674ymf7vlm2weysk5xbnhtuyxp3johd3yty@s2clguxon5hp>
Date: Thu, 5 Feb 2026 13:25:58 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Manikanta Maddireddy <mmaddireddy@...dia.com>
Cc: bhelgaas@...gle.com, lpieralisi@...nel.org, kwilczynski@...nel.org, 
	robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org, 
	thierry.reding@...il.com, jonathanh@...dia.com, jingoohan1@...il.com, vidyas@...dia.com, 
	cassel@...nel.org, 18255117159@....com, linux-pci@...r.kernel.org, 
	devicetree@...r.kernel.org, linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V4 00/22] Enhancements to pcie-tegra194 driver

On Mon, Jan 26, 2026 at 01:14:57PM +0530, Manikanta Maddireddy wrote:
> This series[1] was originally posted by Vidya Sagar, and I have rebased
> it onto 6.19.0-rc6-next. I addressed review comments, reworked a patch
> and included four new patches. I verified these patches on Jetson AGX
> Orin(Tegra234 SoC).
> 
> Disabling L1SS capability based on support-clkreq device tree property
> is moved to common DWC driver, so I reworked below patch to disable
> just L1.2 capability on Tegra234 SoC.
>  - PCI: tegra194: Disable L1.2 capability of Tegra234 EP
> 
> I added below four new patches to fix bugs, commit message of each
> patch has the details on the bug and fix.
>  - PCI: tegra194: Add ASPM L1 entrance latency config
>  - PCI: tegra194: Use HW version number
>  - PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
>  - PCI: tegra194: Disable PERST IRQ only in Endpoint mode 
> 

Please send the fixes separately. It is hard to review a big series like this. I
don't recommend sending more than 10 patches per series.

- Mani

> I added more context in the commit message for below patch based on review
> comment in V3.
>  - PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
> 
> Rest of the patches are same as the original V3 series, just rebased them on
> 6.19.0-rc6-next.
> 
> Verification details.
>  - I verified both Root port and Endpoint mode controllers on Tegra234 SoC.
>  - Basic sanity Link up, configuration space access and BAR access are verified.
>  - I verified that ASPM L1.2 capability is disabled for Endpoint mode.
>  - I verified suspend to RAM tests with Endpoint mode.
> 
> [1] https://patchwork.kernel.org/project/linux-pci/patch/20221013183854.21087-1-vidyas@nvidia.com/
> 
> Manikanta Maddireddy (4):
>   PCI: tegra194: Add ASPM L1 entrance latency config
>   PCI: tegra194: Use HW version number
>   PCI: tegra194: Fix CBB timeout caused by DBI access before core
>     power-on
>   PCI: tegra194: Disable PERST IRQ only in Endpoint mode
> 
> Vidya Sagar (18):
>   PCI: tegra194: Use devm_gpiod_get_optional() to parse
>     "nvidia,refclk-select"
>   PCI: tegra194: Drive CLKREQ signal low explicitly
>   PCI: tegra194: Fix polling delay for L2 state
>   PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP
>   PCI: tegra194: Refactor LTSSM state polling on surprise down
>   PCI: tegra194: Disable direct speed change for EP
>   PCI: tegra194: Calibrate P2U for endpoint mode
>   PCI: tegra194: Free resources during controller deinitialization
>   PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt
>     registration
>   PCI: tegra194: Enable DMA interrupt
>   PCI: tegra194: Enable hardware hot reset mode in Endpoint
>   PCI: tegra194: Allow system suspend when the Endpoint link is not up
>   PCI: tegra194: Disable L1.2 capability of Tegra234 EP
>   PCI: tegra194: Set LTR message request before PCIe link up
>   PCI: tegra194: Don't force the device into the D0 state before L2
>   PCI: tegra194: Free up EP resources during remove()
>   dt-bindings: PCI: tegra194: Add monitor clock support
>   PCI: tegra194: Add core monitor clock support
> 
>  .../bindings/pci/nvidia,tegra194-pcie-ep.yaml |   6 +-
>  .../bindings/pci/nvidia,tegra194-pcie.yaml    |   6 +-
>  drivers/pci/controller/dwc/pcie-designware.c  |   2 +-
>  drivers/pci/controller/dwc/pcie-designware.h  |   2 +
>  drivers/pci/controller/dwc/pcie-tegra194.c    | 268 +++++++++++-------
>  5 files changed, 181 insertions(+), 103 deletions(-)
> 
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ