linux-kernel - [PATCH] iio: imu: inv_icm45600: fix INT1 drive bit inverted

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20260205-inv-icm45600-fix-int1-drive-bit-v1-1-72a78cd07150@tdk.com>
Date: Thu, 05 Feb 2026 10:55:38 +0100
From: Jean-Baptiste Maneyrol via B4 Relay <devnull+jean-baptiste.maneyrol.tdk.com@...nel.org>
To: Remi Buisson <remi.buisson@....com>, 
 Jonathan Cameron <jic23@...nel.org>, David Lechner <dlechner@...libre.com>, 
 Nuno Sá <nuno.sa@...log.com>, 
 Andy Shevchenko <andy@...nel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@...wei.com>, 
 linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@....com>, 
 stable@...r.kernel.org
Subject: [PATCH] iio: imu: inv_icm45600: fix INT1 drive bit inverted

From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@....com>

Drive bit must be set for open-drain mode and be cleared for push-pull
mode.

Fixes: 06674a72cf7a ("iio: imu: inv_icm45600: add buffer support in iio devices")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@....com>
Cc: stable@...r.kernel.org
---
 drivers/iio/imu/inv_icm45600/inv_icm45600.h      | 2 +-
 drivers/iio/imu/inv_icm45600/inv_icm45600_core.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/imu/inv_icm45600/inv_icm45600.h b/drivers/iio/imu/inv_icm45600/inv_icm45600.h
index c5b5446f6c3b43150512bcc4357cee385080b634..1c796d4b2a4038203f734f80d7bf7bad138c3497 100644
--- a/drivers/iio/imu/inv_icm45600/inv_icm45600.h
+++ b/drivers/iio/imu/inv_icm45600/inv_icm45600.h
@@ -205,7 +205,7 @@ struct inv_icm45600_sensor_state {
 #define INV_ICM45600_SPI_SLEW_RATE_38NS			0
 
 #define INV_ICM45600_REG_INT1_CONFIG2			0x0018
-#define INV_ICM45600_INT1_CONFIG2_PUSH_PULL		BIT(2)
+#define INV_ICM45600_INT1_CONFIG2_OPEN_DRAIN		BIT(2)
 #define INV_ICM45600_INT1_CONFIG2_LATCHED		BIT(1)
 #define INV_ICM45600_INT1_CONFIG2_ACTIVE_HIGH		BIT(0)
 #define INV_ICM45600_INT1_CONFIG2_ACTIVE_LOW		0x00
diff --git a/drivers/iio/imu/inv_icm45600/inv_icm45600_core.c b/drivers/iio/imu/inv_icm45600/inv_icm45600_core.c
index ab1cb7b9dba435a3280e50ab77cd16e903c7816c..b028044d609a41f6d4b747383323130ded0d2e79 100644
--- a/drivers/iio/imu/inv_icm45600/inv_icm45600_core.c
+++ b/drivers/iio/imu/inv_icm45600/inv_icm45600_core.c
@@ -637,8 +637,8 @@ static int inv_icm45600_irq_init(struct inv_icm45600_state *st, int irq,
 		break;
 	}
 
-	if (!open_drain)
-		val |= INV_ICM45600_INT1_CONFIG2_PUSH_PULL;
+	if (open_drain)
+		val |= INV_ICM45600_INT1_CONFIG2_OPEN_DRAIN;
 
 	ret = regmap_write(st->map, INV_ICM45600_REG_INT1_CONFIG2, val);
 	if (ret)

---
base-commit: d820183f371d9aa8517a1cd21fe6edacf0f94b7f
change-id: 20260205-inv-icm45600-fix-int1-drive-bit-7d12ea3e2cd2

Best regards,
-- 
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@....com>