[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260205102104.394991-4-heiko@sntech.de>
Date: Thu, 5 Feb 2026 11:21:04 +0100
From: Heiko Stuebner <heiko@...ech.de>
To: heiko@...ech.de
Cc: quentin.schulz@...rry.de,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Heiko Stuebner <heiko.stuebner@...rry.de>
Subject: [PATCH 3/3] arm64: dts: rockchip: add pinctrl for clk-generator GPIO on rk3588-tiger
From: Heiko Stuebner <heiko.stuebner@...rry.de>
While specific driver in the Linux-Kernel handles GPIOs gracefully without
matching pinctrl entries, this might not be true for other operating
systems. So having pinctrl entries makes the hardware-description
more complete.
The somewhat similar rk3588-jaguar board has a pinctrl entry already,
so also add one for rk3588-tiger.
Signed-off-by: Heiko Stuebner <heiko.stuebner@...rry.de>
---
arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
index 259fb125e13f..91057b166690 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
@@ -58,6 +58,8 @@ pcie_refclk: pcie-clock-generator {
clock-frequency = <100000000>;
clock-output-names = "pcie3_refclk";
enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x4_clkreqn_m1_l>;
vdd-supply = <&vcca_3v3_s0>;
};
@@ -357,6 +359,12 @@ module_led_pin: module-led-pin {
};
};
+ pcie30x4 {
+ pcie30x4_clkreqn_m1_l: pcie30x4-clkreqn-m1-l {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb3 {
usb3_id: usb3-id {
rockchip,pins =
--
2.47.2
Powered by blists - more mailing lists