linux-kernel - [PATCH 3/3] arm64: dts: st: enable display support on stm32mp257f-dk board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20260205-master-v1-3-fe6399aa3aab@foss.st.com>
Date: Thu, 5 Feb 2026 14:39:42 +0100
From: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>, Maxime Coquelin
	<mcoquelin.stm32@...il.com>, Alexandre Torgue <alexandre.torgue@...s.st.com>
CC: Philippe Cornu <philippe.cornu@...s.st.com>, Yannick Fertre
	<yannick.fertre@...s.st.com>, Raphaël Gallais-Pou
	<rgallaispou@...il.com>, <devicetree@...r.kernel.org>,
	<linux-stm32@...md-mailman.stormreply.com>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 3/3] arm64: dts: st: enable display support on
 stm32mp257f-dk board

Enable the following IPs on stm32mp257f-dk in order to get display:
   * LTDC
   * LVDS
   * WSVGA LVDS panel (1024x600)
   * Panel LVDS backlight as GPIO backlight
   * ILI2511 i2c touchscreen

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
---
 arch/arm64/boot/dts/st/stm32mp257f-dk.dts | 90 +++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
index 4e45562ceb3dabb19eca3340337b364f63508215..b60c13614cfb9207b8b541ee8bde4ae9aab937a8 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
@@ -55,6 +55,43 @@ led-blue {
 		};
 	};
 
+	panel_lvds: display {
+		compatible = "edt,etml0700z9ndha", "panel-lvds";
+		enable-gpios = <&gpioi 4 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_lvds_backlight>;
+		power-supply = <&scmi_v3v3>;
+		width-mm = <156>;
+		height-mm = <92>;
+		data-mapping = "vesa-24";
+		status = "okay";
+
+		panel-timing {
+			clock-frequency = <54000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <150>;
+			hback-porch = <150>;
+			hsync-len = <21>;
+			vfront-porch = <24>;
+			vback-porch = <24>;
+			vsync-len = <21>;
+		};
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds_out0>;
+			};
+		};
+	};
+
+	panel_lvds_backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioi 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+
 	memory@...00000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
@@ -100,6 +137,59 @@ phy1_eth1: ethernet-phy@1 {
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_b>;
+	pinctrl-1 = <&i2c2_sleep_pins_b>;
+	i2c-scl-rising-time-ns = <108>;
+	i2c-scl-falling-time-ns = <12>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	ili2511: ili2511@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpioi>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpioi 0 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+};
+
+&ltdc {
+	status = "okay";
+	port {
+		ltdc_ep0_out: endpoint {
+			remote-endpoint = <&lvds_in>;
+		};
+	};
+};
+
+&lvds {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			lvds_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			lvds_out0: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};
+
 &scmi_regu {
 	scmi_vddio1: regulator@0 {
 		regulator-min-microvolt = <1800000>;

-- 
2.43.0