linux-kernel - Re: [PATCH 3/4] arm64: dts: qcom: pm7250b: Enable Qualcomm BCL device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c1a9aec2-0389-4a24-bc28-75be04cc91d8@oss.qualcomm.com>
Date: Fri, 6 Feb 2026 10:11:43 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@....qualcomm.com>,
        Guenter Roeck <linux@...ck-us.net>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
 <conor+dt@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, amit.kucheria@....qualcomm.com,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Gaurav Kohli <gaurav.kohli@....qualcomm.com>
Cc: linux-hwmon@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/4] arm64: dts: qcom: pm7250b: Enable Qualcomm BCL device

On 2/5/26 10:14 PM, Manaf Meethalavalappu Pallikunhi wrote:
> Enable Qualcomm BCL hardware devicetree binding configuration
> for pm7250b.
> 
> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@....qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/pm7250b.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index 0761e6b5fd8d..69ad76831cde 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -202,6 +202,16 @@ pm7250b_gpios: gpio@...0 {
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
>  		};
> +
> +		bcl@...0 {

This should be higher up (the node above is 0xc000, this one is 0x1d00)

Konrad