| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260206120121.856471-4-aman.kumarpandey@nxp.com>
Date: Fri, 6 Feb 2026 14:01:20 +0200
From: Aman Kumar Pandey <aman.kumarpandey@....com>
To: linux-kernel@...r.kernel.org,
linux-i3c@...ts.infradead.org,
alexandre.belloni@...tlin.com,
krzk+dt@...nel.org,
robh@...nel.org,
conor+dt@...nel.org,
devicetree@...r.kernel.org,
broonie@...nel.org,
lee@...nel.org,
Frank.Li@....com,
lgirdwood@...il.com
Cc: vikash.bansal@....com,
priyanka.jain@....com,
shashank.rebbapragada@....com,
Aman Kumar Pandey <aman.kumarpandey@....com>
Subject: [PATCH v5 4/5] regulator: p3h2x4x: Add driver for on-die regulators in NXP P3H2x4x i3c hub
The NXP P3H2x4x family integrates on-die regulators alongside I3C hub
functionality. This driver registers the regulators using the MFD
framework and exposes them via the regulator subsystem.
Signed-off-by: Aman Kumar Pandey <aman.kumarpandey@....com>
Signed-off-by: Vikash Bansal <vikash.bansal@....com>
---
Changes in v5:
- Updated dev_err_probe() for regmap_init failure.
- Updated module description
Changes in v4:
- Split the driver into three separate patches (mfd, regulator and I3C hub)
- Introduced driver for on-die regulators in NXP P3H2x4x I3C hub
---
---
MAINTAINERS | 1 +
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/p3h2840_i3c_hub_regulator.c | 247 ++++++++++++++++++
4 files changed, 259 insertions(+)
create mode 100644 drivers/regulator/p3h2840_i3c_hub_regulator.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 6c247e4a0c12..6601830b6e86 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18914,6 +18914,7 @@ L: linux-i3c-owner@...ts.infradead.org
S: Maintained
F: Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml
F: drivers/mfd/p3h2840.c
+F: drivers/regulator/p3h2840_i3c_hub_regulator.c
F: include/linux/mfd/p3h2840.h
NXP PF5300/PF5301/PF5302 PMIC REGULATOR DEVICE DRIVER
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d2335276cce5..84684701dad7 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1010,6 +1010,16 @@ config REGULATOR_MTK_DVFSRC
of Mediatek. It allows for voting on regulator state
between multiple users.
+config REGULATOR_P3H2X4X
+ tristate "P3H2X4X regulator support"
+ depends on MFD_P3H2X4X
+ help
+ This driver provides support for the voltage regulators of the
+ P3H244x/P3H284x multi-function I3C Hub device.
+
+ Say M here if you want to include support for this regulator as
+ a module. The module will be named "p3h2840_i3c_hub_regulator".
+
config REGULATOR_PALMAS
tristate "TI Palmas PMIC Regulators"
depends on MFD_PALMAS
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1beba1493241..145138f437d8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -127,6 +127,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
+obj-$(CONFIG_REGULATOR_P3H2X4X) += p3h2840_i3c_hub_regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o
obj-$(CONFIG_REGULATOR_PF0900) += pf0900-regulator.o
diff --git a/drivers/regulator/p3h2840_i3c_hub_regulator.c b/drivers/regulator/p3h2840_i3c_hub_regulator.c
new file mode 100644
index 000000000000..1e9abc398f5a
--- /dev/null
+++ b/drivers/regulator/p3h2840_i3c_hub_regulator.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2025 NXP
+ * This P3H2x4x driver file contain functions for enable/disable regulator and voltage set/get.
+ */
+#include <linux/bitfield.h>
+#include <linux/mfd/p3h2840.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#define P3H2x4x_LDO_AND_PULLUP_CONF 0x19
+#define P3H2x4x_LDO_ENABLE_DISABLE_MASK GENMASK(3, 0)
+#define P3H2x4x_CP0_EN_LDO BIT(0)
+#define P3H2x4x_CP1_EN_LDO BIT(1)
+#define P3H2x4x_TP0145_EN_LDO BIT(2)
+#define P3H2x4x_TP2367_EN_LDO BIT(3)
+
+#define P3H2x4x_NET_OPER_MODE_CONF 0x15
+#define P3H2x4x_VCCIO_LDO_CONF 0x16
+#define P3H2x4x_CP0_VCCIO_LDO_VOLTAGE_MASK GENMASK(1, 0)
+#define P3H2x4x_CP0_VCCIO_LDO_VOLTAGE(x) \
+ FIELD_PREP(P3H2x4x_CP0_VCCIO_LDO_VOLTAGE_MASK, x)
+#define P3H2x4x_CP1_VCCIO_LDO_VOLTAGE_MASK GENMASK(3, 2)
+#define P3H2x4x_CP1_VCCIO_LDO_VOLTAGE(x) \
+ FIELD_PREP(P3H2x4x_CP1_VCCIO_LDO_VOLTAGE_MASK, x)
+#define P3H2x4x_TP0145_VCCIO_LDO_VOLTAGE_MASK GENMASK(5, 4)
+#define P3H2x4x_TP0145_VCCIO_LDO_VOLTAGE(x) \
+ FIELD_PREP(P3H2x4x_TP0145_VCCIO_LDO_VOLTAGE_MASK, x)
+#define P3H2x4x_TP2367_VCCIO_LDO_VOLTAGE_MASK GENMASK(7, 6)
+#define P3H2x4x_TP2367_VCCIO_LDO_VOLTAGE(x) \
+ FIELD_PREP(P3H2x4x_TP2367_VCCIO_LDO_VOLTAGE_MASK, x)
+#define P3H2x4x_LDO_COUNT 4
+
+struct p3h2x4x_regulator_dev {
+ struct regulator_dev *rp3h2x4x_dev[P3H2x4x_LDO_COUNT];
+ struct regmap *regmap;
+};
+
+static int p3h2x4x_regulator_enable(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int orig;
+
+ ret = regmap_read(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE, &orig);
+ if (ret)
+ return ret;
+
+ if (orig != P3H2x4x_REGISTERS_UNLOCK_CODE) {
+ ret = regmap_write(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE,
+ P3H2x4x_REGISTERS_UNLOCK_CODE);
+ if (ret)
+ return ret;
+ }
+
+ ret = regulator_enable_regmap(rdev);
+ if (ret)
+ return ret;
+
+ if (orig != P3H2x4x_REGISTERS_UNLOCK_CODE) {
+ ret = regmap_write(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE, orig);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+static int p3h2x4x_regulator_disable(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int orig;
+
+ ret = regmap_read(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE, &orig);
+ if (ret)
+ return ret;
+
+ if (orig != P3H2x4x_REGISTERS_UNLOCK_CODE) {
+ ret = regmap_write(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE,
+ P3H2x4x_REGISTERS_UNLOCK_CODE);
+ if (ret)
+ return ret;
+ }
+
+ ret = regulator_disable_regmap(rdev);
+ if (ret)
+ return ret;
+
+ if (orig != P3H2x4x_REGISTERS_UNLOCK_CODE) {
+ ret = regmap_write(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE, orig);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+static int p3h2x4x_regulator_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
+{
+ int ret;
+ unsigned int orig;
+
+ ret = regmap_read(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE, &orig);
+ if (ret)
+ return ret;
+
+ if (orig != P3H2x4x_REGISTERS_UNLOCK_CODE) {
+ ret = regmap_write(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE,
+ P3H2x4x_REGISTERS_UNLOCK_CODE);
+ if (ret)
+ return ret;
+ }
+
+ ret = regulator_set_voltage_sel_regmap(rdev, sel);
+ if (ret)
+ return ret;
+
+ if (orig != P3H2x4x_REGISTERS_UNLOCK_CODE) {
+ ret = regmap_write(rdev->regmap, P3H2x4x_DEV_REG_PROTECTION_CODE, orig);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+static const struct regulator_ops p3h2x4x_ldo_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = p3h2x4x_regulator_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = p3h2x4x_regulator_enable,
+ .disable = p3h2x4x_regulator_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const unsigned int p3h2x4x_voltage_table[] = {
+ 1000000,
+ 1100000,
+ 1200000,
+ 1800000,
+};
+
+static struct regulator_desc p3h2x4x_regulators[] = {
+ {
+ .name = "LDO_CP0",
+ .of_match = of_match_ptr("LDO_CP0"),
+ .regulators_node = of_match_ptr("regulators"),
+ .volt_table = p3h2x4x_voltage_table,
+ .n_voltages = ARRAY_SIZE(p3h2x4x_voltage_table),
+ .ops = &p3h2x4x_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = P3H2x4x_LDO_AND_PULLUP_CONF,
+ .enable_mask = P3H2x4x_CP0_EN_LDO,
+ .vsel_reg = P3H2x4x_VCCIO_LDO_CONF,
+ .vsel_mask = P3H2x4x_CP0_VCCIO_LDO_VOLTAGE_MASK,
+ },
+ {
+ .name = "LDO_CP1",
+ .of_match = of_match_ptr("LDO_CP1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .volt_table = p3h2x4x_voltage_table,
+ .n_voltages = ARRAY_SIZE(p3h2x4x_voltage_table),
+ .ops = &p3h2x4x_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = P3H2x4x_LDO_AND_PULLUP_CONF,
+ .enable_mask = P3H2x4x_CP1_EN_LDO,
+ .vsel_reg = P3H2x4x_VCCIO_LDO_CONF,
+ .vsel_mask = P3H2x4x_CP1_VCCIO_LDO_VOLTAGE_MASK,
+ },
+ {
+ .name = "LDO_TPG0",
+ .of_match = of_match_ptr("LDO_TPG0"),
+ .regulators_node = of_match_ptr("regulators"),
+ .volt_table = p3h2x4x_voltage_table,
+ .n_voltages = ARRAY_SIZE(p3h2x4x_voltage_table),
+ .ops = &p3h2x4x_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = P3H2x4x_LDO_AND_PULLUP_CONF,
+ .enable_mask = P3H2x4x_TP0145_EN_LDO,
+ .vsel_reg = P3H2x4x_VCCIO_LDO_CONF,
+ .vsel_mask = P3H2x4x_TP0145_VCCIO_LDO_VOLTAGE_MASK,
+ },
+ {
+ .name = "LDO_TPG1",
+ .of_match = of_match_ptr("LDO_TPG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .volt_table = p3h2x4x_voltage_table,
+ .n_voltages = ARRAY_SIZE(p3h2x4x_voltage_table),
+ .ops = &p3h2x4x_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = P3H2x4x_LDO_AND_PULLUP_CONF,
+ .enable_mask = P3H2x4x_TP2367_EN_LDO,
+ .vsel_reg = P3H2x4x_VCCIO_LDO_CONF,
+ .vsel_mask = P3H2x4x_TP2367_VCCIO_LDO_VOLTAGE_MASK,
+ },
+};
+
+static int p3h2x4x_regulator_probe(struct platform_device *pdev)
+{
+ struct p3h2x4x_dev *p3h2x4x = dev_get_drvdata(pdev->dev.parent);
+ struct p3h2x4x_regulator_dev *p3h2x4x_regulator;
+ struct regulator_config rcfg = { };
+ struct device *dev = &pdev->dev;
+ struct regulator_dev *rdev;
+ int ret, i;
+
+ p3h2x4x_regulator = devm_kzalloc(dev, sizeof(*p3h2x4x_regulator), GFP_KERNEL);
+ if (!p3h2x4x_regulator)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, p3h2x4x_regulator);
+
+ p3h2x4x_regulator->regmap = p3h2x4x->regmap;
+ device_set_of_node_from_dev(dev, dev->parent);
+
+ rcfg.dev = dev;
+ rcfg.dev->of_node = dev->of_node;
+ rcfg.regmap = p3h2x4x_regulator->regmap;
+ rcfg.driver_data = p3h2x4x_regulator;
+
+ for (i = 0; i < ARRAY_SIZE(p3h2x4x_regulators); i++) {
+ rdev = devm_regulator_register(&pdev->dev, &p3h2x4x_regulators[i], &rcfg);
+ if (IS_ERR(rdev)) {
+ return dev_err_probe(dev, PTR_ERR(rdev), "Failed to register %s\n",
+ p3h2x4x_regulators[i].name);
+ }
+ p3h2x4x_regulator->rp3h2x4x_dev[i] = rdev;
+ }
+ return 0;
+}
+
+static struct platform_driver p3h2x4x_regulator_driver = {
+ .driver = {
+ .name = "p3h2x4x-regulator",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+ .probe = p3h2x4x_regulator_probe,
+};
+module_platform_driver(p3h2x4x_regulator_driver);
+
+MODULE_AUTHOR("Aman Kumar Pandey <aman.kumarpandey@....com>");
+MODULE_AUTHOR("vikash Bansal <vikash.bansal@....com>");
+MODULE_DESCRIPTION("P3H2x4x I3C HUB Regulator driver");
+MODULE_LICENSE("GPL");
--
2.25.1
Powered by blists - more mailing lists