| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20260208025919.1614754-1-shreyasravi320@gmail.com>
Date: Sat, 7 Feb 2026 18:59:18 -0800
From: Shreyas Ravi <shreyasravi320@...il.com>
To: sudipm.mukherjee@...il.com,
teddy.wang@...iconmotion.com,
gregkh@...uxfoundation.org
Cc: linux-fbdev@...r.kernel.org,
linux-staging@...ts.linux.dev,
linux-kernel@...r.kernel.org,
Shreyas Ravi <shreyasravi320@...il.com>
Subject: [PATCH v2 1/2] staging: sm750fb: Fix CamelCase variable names
Rename CamelCase variable names to snake_case to comply
with kernel coding style.
No functional changes
Signed-off-by: Shreyas Ravi <shreyasravi320@...il.com>
---
drivers/staging/sm750fb/sm750.c | 34 +++----
drivers/staging/sm750fb/sm750.h | 16 ++--
drivers/staging/sm750fb/sm750_accel.c | 130 +++++++++++++-------------
drivers/staging/sm750fb/sm750_accel.h | 44 ++++-----
drivers/staging/sm750fb/sm750_hw.c | 26 +++---
5 files changed, 125 insertions(+), 125 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index dec1f6b88a7d..1ed7ff57c142 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -624,27 +624,27 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
output->paths = sm750_pnc;
crtc->channel = sm750_primary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->p_v_mem;
pr_info("use simul primary mode\n");
break;
case sm750_simul_sec:
output->paths = sm750_pnc;
crtc->channel = sm750_secondary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->p_v_mem;
break;
case sm750_dual_normal:
if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_primary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->p_v_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_secondary;
/* not consider of padding stuffs for o_screen,need fix */
crtc->o_screen = sm750_dev->vidmem_size >> 1;
- crtc->v_screen = sm750_dev->pvMem + crtc->o_screen;
+ crtc->v_screen = sm750_dev->p_v_mem + crtc->o_screen;
}
break;
case sm750_dual_swap:
@@ -652,7 +652,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
output->paths = sm750_panel;
crtc->channel = sm750_secondary;
crtc->o_screen = 0;
- crtc->v_screen = sm750_dev->pvMem;
+ crtc->v_screen = sm750_dev->p_v_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_primary;
@@ -660,7 +660,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
* need fix
*/
crtc->o_screen = sm750_dev->vidmem_size >> 1;
- crtc->v_screen = sm750_dev->pvMem + crtc->o_screen;
+ crtc->v_screen = sm750_dev->p_v_mem + crtc->o_screen;
}
break;
default:
@@ -764,14 +764,14 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
* must be set after crtc member initialized
*/
crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
- crtc->cursor.mmio = sm750_dev->pvReg +
+ crtc->cursor.mmio = sm750_dev->p_v_reg +
0x800f0 + (int)crtc->channel * 0x140;
pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio);
crtc->cursor.max_h = 64;
crtc->cursor.max_w = 64;
crtc->cursor.size = crtc->cursor.max_h * crtc->cursor.max_w * 2 / 8;
- crtc->cursor.vstart = sm750_dev->pvMem + crtc->cursor.offset;
+ crtc->cursor.vstart = sm750_dev->p_v_mem + crtc->cursor.offset;
memset_io(crtc->cursor.vstart, 0, crtc->cursor.size);
if (!g_hwcursor)
@@ -921,9 +921,9 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
sm750_dev->init_parm.chip_clk = 0;
sm750_dev->init_parm.mem_clk = 0;
sm750_dev->init_parm.master_clk = 0;
- sm750_dev->init_parm.powerMode = 0;
- sm750_dev->init_parm.setAllEngOff = 0;
- sm750_dev->init_parm.resetMemory = 1;
+ sm750_dev->init_parm.power_mode = 0;
+ sm750_dev->init_parm.set_all_eng_off = 0;
+ sm750_dev->init_parm.reset_memory = 1;
/* defaultly turn g_hwcursor on for both view */
g_hwcursor = 3;
@@ -942,11 +942,11 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
} else if (!strncmp(opt, "nocrt", strlen("nocrt"))) {
sm750_dev->nocrt = 1;
} else if (!strncmp(opt, "36bit", strlen("36bit"))) {
- sm750_dev->pnltype = sm750_doubleTFT;
+ sm750_dev->pnltype = sm750_double_tft;
} else if (!strncmp(opt, "18bit", strlen("18bit"))) {
- sm750_dev->pnltype = sm750_dualTFT;
+ sm750_dev->pnltype = sm750_dual_tft;
} else if (!strncmp(opt, "24bit", strlen("24bit"))) {
- sm750_dev->pnltype = sm750_24TFT;
+ sm750_dev->pnltype = sm750_24_tft;
} else if (!strncmp(opt, "nohwc0", strlen("nohwc0"))) {
g_hwcursor &= ~0x1;
} else if (!strncmp(opt, "nohwc1", strlen("nohwc1"))) {
@@ -1090,7 +1090,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
sm750_dev->mtrr.vram = arch_phys_wc_add(sm750_dev->vidmem_start,
sm750_dev->vidmem_size);
- memset_io(sm750_dev->pvMem, 0, sm750_dev->vidmem_size);
+ memset_io(sm750_dev->p_v_mem, 0, sm750_dev->vidmem_size);
pci_set_drvdata(pdev, sm750_dev);
@@ -1121,8 +1121,8 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
sm750fb_framebuffer_release(sm750_dev);
arch_phys_wc_del(sm750_dev->mtrr.vram);
- iounmap(sm750_dev->pvReg);
- iounmap(sm750_dev->pvMem);
+ iounmap(sm750_dev->p_v_reg);
+ iounmap(sm750_dev->p_v_mem);
kfree(g_settings);
}
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 67b9bfa23f41..14e0e7d75f7e 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -13,9 +13,9 @@
#endif
enum sm750_pnltype {
- sm750_24TFT = 0, /* 24bit tft */
- sm750_dualTFT = 2, /* dual 18 bit tft */
- sm750_doubleTFT = 1, /* 36 bit double pixel tft */
+ sm750_24_tft = 0, /* 24bit tft */
+ sm750_dual_tft = 2, /* dual 18 bit tft */
+ sm750_double_tft = 1, /* 36 bit double pixel tft */
};
/* vga channel is not concerned */
@@ -39,13 +39,13 @@ enum sm750_path {
};
struct init_status {
- ushort powerMode;
+ ushort power_mode;
/* below three clocks are in unit of MHZ*/
ushort chip_clk;
ushort mem_clk;
ushort master_clk;
- ushort setAllEngOff;
- ushort resetMemory;
+ ushort set_all_eng_off;
+ ushort reset_memory;
};
struct lynx_accel {
@@ -97,8 +97,8 @@ struct sm750_dev {
unsigned long vidreg_start;
__u32 vidmem_size;
__u32 vidreg_size;
- void __iomem *pvReg;
- unsigned char __iomem *pvMem;
+ void __iomem *p_v_reg;
+ unsigned char __iomem *p_v_mem;
/* locks*/
spinlock_t slock;
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 046b9282b24a..4dd9b910af13 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -27,7 +27,7 @@ static inline u32 read_dpr(struct lynx_accel *accel, int offset)
return readl(accel->dpr_base + offset);
}
-static inline void write_dpPort(struct lynx_accel *accel, u32 data)
+static inline void write_dp_port(struct lynx_accel *accel, u32 data)
{
writel(data, accel->dp_port_base);
}
@@ -85,7 +85,7 @@ void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt)
}
int sm750_hw_fillrect(struct lynx_accel *accel,
- u32 base, u32 pitch, u32 Bpp,
+ u32 base, u32 pitch, u32 bytes_per_pixel,
u32 x, u32 y, u32 width, u32 height,
u32 color, u32 rop)
{
@@ -102,14 +102,14 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, base); /* dpr40 */
write_dpr(accel, DE_PITCH,
- ((pitch / Bpp << DE_PITCH_DESTINATION_SHIFT) &
+ ((pitch / bytes_per_pixel << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (pitch / Bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (pitch / bytes_per_pixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
write_dpr(accel, DE_WINDOW_WIDTH,
- ((pitch / Bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((pitch / bytes_per_pixel << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (pitch / Bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr44 */
+ (pitch / bytes_per_pixel & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr44 */
write_dpr(accel, DE_FOREGROUND, color); /* DPR14 */
@@ -132,13 +132,13 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
/**
* sm750_hw_copyarea
* @accel: Acceleration device data
- * @sBase: Address of source: offset in frame buffer
- * @sPitch: Pitch value of source surface in BYTE
+ * @source_base: Address of source: offset in frame buffer
+ * @source_pitch: Pitch value of source surface in BYTE
* @sx: Starting x coordinate of source surface
* @sy: Starting y coordinate of source surface
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @Bpp: Color depth of destination surface
+ * @dest_base: Address of destination: offset in frame buffer
+ * @dest_pitch: Pitch value of destination surface in BYTE
+ * @bytes_per_pixel: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
@@ -146,21 +146,21 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
* @rop2: ROP value
*/
int sm750_hw_copyarea(struct lynx_accel *accel,
- unsigned int sBase, unsigned int sPitch,
+ unsigned int source_base, unsigned int source_pitch,
unsigned int sx, unsigned int sy,
- unsigned int dBase, unsigned int dPitch,
- unsigned int Bpp, unsigned int dx, unsigned int dy,
+ unsigned int dest_base, unsigned int dest_pitch,
+ unsigned int bytes_per_pixel, unsigned int dx, unsigned int dy,
unsigned int width, unsigned int height,
unsigned int rop2)
{
- unsigned int nDirection, de_ctrl;
+ unsigned int n_direction, de_ctrl;
- nDirection = LEFT_TO_RIGHT;
+ n_direction = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
de_ctrl = 0;
/* If source and destination are the same surface, need to check for overlay cases */
- if (sBase == dBase && sPitch == dPitch) {
+ if (source_base == dest_base && source_pitch == dest_pitch) {
/* Determine direction of operation */
if (sy < dy) {
/* +----------+
@@ -173,7 +173,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +----------+
*/
- nDirection = BOTTOM_TO_TOP;
+ n_direction = BOTTOM_TO_TOP;
} else if (sy > dy) {
/* +----------+
* |D |
@@ -185,7 +185,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +----------+
*/
- nDirection = TOP_TO_BOTTOM;
+ n_direction = TOP_TO_BOTTOM;
} else {
/* sy == dy */
@@ -198,7 +198,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +------+---+------+
*/
- nDirection = RIGHT_TO_LEFT;
+ n_direction = RIGHT_TO_LEFT;
} else {
/* sx > dx */
@@ -210,12 +210,12 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +------+---+------+
*/
- nDirection = LEFT_TO_RIGHT;
+ n_direction = LEFT_TO_RIGHT;
}
}
}
- if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) {
+ if ((n_direction == BOTTOM_TO_TOP) || (n_direction == RIGHT_TO_LEFT)) {
sx += width - 1;
sy += height - 1;
dx += width - 1;
@@ -234,14 +234,14 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, source_base); /* dpr40 */
/*
* 2D Destination Base.
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dest_base); /* dpr44 */
/*
* Program pitch (distance between the 1st points of two adjacent lines).
@@ -249,9 +249,9 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* pixel values. Need Byte to pixel conversion.
*/
write_dpr(accel, DE_PITCH,
- ((dPitch / Bpp << DE_PITCH_DESTINATION_SHIFT) &
+ ((dest_pitch / bytes_per_pixel << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (sPitch / Bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (source_pitch / bytes_per_pixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
/*
* Screen Window width in Pixels.
@@ -259,9 +259,9 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* for a given point.
*/
write_dpr(accel, DE_WINDOW_WIDTH,
- ((dPitch / Bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((dest_pitch / bytes_per_pixel << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (sPitch / Bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr3c */
+ (source_pitch / bytes_per_pixel & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr3c */
if (accel->de_wait() != 0)
return -1;
@@ -277,7 +277,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr08 */
de_ctrl = (rop2 & DE_CONTROL_ROP_MASK) | DE_CONTROL_ROP_SELECT |
- ((nDirection == RIGHT_TO_LEFT) ? DE_CONTROL_DIRECTION : 0) |
+ ((n_direction == RIGHT_TO_LEFT) ? DE_CONTROL_DIRECTION : 0) |
DE_CONTROL_COMMAND_BITBLT | DE_CONTROL_STATUS;
write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
@@ -299,38 +299,38 @@ static unsigned int de_get_transparency(struct lynx_accel *accel)
/**
* sm750_hw_imageblit
* @accel: Acceleration device data
- * @pSrcbuf: pointer to start of source buffer in system memory
- * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
+ * @p_srcbuf: pointer to start of source buffer in system memory
+ * @src_delta: Pitch value (in bytes) of the source buffer, +ive means top down
* and -ive mean button up
- * @startBit: Mono data can start at any bit in a byte, this value should be
+ * @start_bit: Mono data can start at any bit in a byte, this value should be
* 0 to 7
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @bytePerPixel: Color depth of destination surface
+ * @dest_base: Address of destination: offset in frame buffer
+ * @dest_pitch: Pitch value of destination surface in BYTE
+ * @byte_per_pixel: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
* @height: height of rectangle in pixel value
- * @fColor: Foreground color (corresponding to a 1 in the monochrome data
- * @bColor: Background color (corresponding to a 0 in the monochrome data
+ * @fg_color: Foreground color (corresponding to a 1 in the monochrome data
+ * @bg_color: Background color (corresponding to a 0 in the monochrome data
* @rop2: ROP value
*/
-int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
- u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
- u32 bytePerPixel, u32 dx, u32 dy, u32 width,
- u32 height, u32 fColor, u32 bColor, u32 rop2)
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_srcbuf,
+ u32 src_delta, u32 start_bit, u32 dest_base, u32 dest_pitch,
+ u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
+ u32 height, u32 fg_color, u32 bg_color, u32 rop2)
{
- unsigned int ulBytesPerScan;
- unsigned int ul4BytesPerScan;
- unsigned int ulBytesRemain;
+ unsigned int ul_bytes_per_scan;
+ unsigned int ul_4_bytes_per_scan;
+ unsigned int ul_bytes_remain;
unsigned int de_ctrl = 0;
- unsigned char ajRemain[4];
+ unsigned char aj_remain[4];
int i, j;
- startBit &= 7; /* Just make sure the start bit is within legal range */
- ulBytesPerScan = (width + startBit + 7) / 8;
- ul4BytesPerScan = ulBytesPerScan & ~3;
- ulBytesRemain = ulBytesPerScan & 3;
+ start_bit &= 7; /* Just make sure the start bit is within legal range */
+ ul_bytes_per_scan = (width + start_bit + 7) / 8;
+ ul_4_bytes_per_scan = ul_bytes_per_scan & ~3;
+ ul_bytes_remain = ul_bytes_per_scan & 3;
if (accel->de_wait() != 0)
return -1;
@@ -345,7 +345,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dest_base);
/*
* Program pitch (distance between the 1st points of two adjacent
@@ -353,9 +353,9 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* register uses pixel values. Need Byte to pixel conversion.
*/
write_dpr(accel, DE_PITCH,
- ((dPitch / bytePerPixel << DE_PITCH_DESTINATION_SHIFT) &
+ ((dest_pitch / byte_per_pixel << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (dPitch / bytePerPixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (dest_pitch / byte_per_pixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
/*
* Screen Window width in Pixels.
@@ -363,17 +363,17 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* in frame buffer for a given point.
*/
write_dpr(accel, DE_WINDOW_WIDTH,
- ((dPitch / bytePerPixel << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((dest_pitch / byte_per_pixel << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (dPitch / bytePerPixel & DE_WINDOW_WIDTH_SRC_MASK));
+ (dest_pitch / byte_per_pixel & DE_WINDOW_WIDTH_SRC_MASK));
/*
* Note: For 2D Source in Host Write, only X_K1_MONO field is needed,
* and Y_K2 field is not used.
- * For mono bitmap, use startBit for X_K1.
+ * For mono bitmap, use start_bit for X_K1.
*/
write_dpr(accel, DE_SOURCE,
- (startBit << DE_SOURCE_X_K1_SHIFT) &
+ (start_bit << DE_SOURCE_X_K1_SHIFT) &
DE_SOURCE_X_K1_MONO_MASK); /* dpr00 */
write_dpr(accel, DE_DESTINATION,
@@ -384,8 +384,8 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
((width << DE_DIMENSION_X_SHIFT) & DE_DIMENSION_X_MASK) |
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr08 */
- write_dpr(accel, DE_FOREGROUND, fColor);
- write_dpr(accel, DE_BACKGROUND, bColor);
+ write_dpr(accel, DE_FOREGROUND, fg_color);
+ write_dpr(accel, DE_BACKGROUND, bg_color);
de_ctrl = (rop2 & DE_CONTROL_ROP_MASK) |
DE_CONTROL_ROP_SELECT | DE_CONTROL_COMMAND_HOST_WRITE |
@@ -396,16 +396,16 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
/* Write MONO data (line by line) to 2D Engine data port */
for (i = 0; i < height; i++) {
/* For each line, send the data in chunks of 4 bytes */
- for (j = 0; j < (ul4BytesPerScan / 4); j++)
- write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
+ for (j = 0; j < (ul_4_bytes_per_scan / 4); j++)
+ write_dp_port(accel, *(unsigned int *)(p_srcbuf + (j * 4)));
- if (ulBytesRemain) {
- memcpy(ajRemain, pSrcbuf + ul4BytesPerScan,
- ulBytesRemain);
- write_dpPort(accel, *(unsigned int *)ajRemain);
+ if (ul_bytes_remain) {
+ memcpy(aj_remain, p_srcbuf + ul_4_bytes_per_scan,
+ ul_bytes_remain);
+ write_dp_port(accel, *(unsigned int *)aj_remain);
}
- pSrcbuf += srcDelta;
+ p_srcbuf += src_delta;
}
return 0;
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index 2c79cb730a0a..59e679961e96 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -190,19 +190,19 @@ void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt);
void sm750_hw_de_init(struct lynx_accel *accel);
int sm750_hw_fillrect(struct lynx_accel *accel,
- u32 base, u32 pitch, u32 Bpp,
+ u32 base, u32 pitch, u32 bytes_per_pixel,
u32 x, u32 y, u32 width, u32 height,
u32 color, u32 rop);
/**
* sm750_hm_copyarea
- * @sBase: Address of source: offset in frame buffer
- * @sPitch: Pitch value of source surface in BYTE
+ * @source_base: Address of source: offset in frame buffer
+ * @source_pitch: Pitch value of source surface in BYTE
* @sx: Starting x coordinate of source surface
* @sy: Starting y coordinate of source surface
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @Bpp: Color depth of destination surface
+ * @dest_base: Address of destination: offset in frame buffer
+ * @dest_pitch: Pitch value of destination surface in BYTE
+ * @bytes_per_pixel: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
@@ -210,34 +210,34 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
* @rop2: ROP value
*/
int sm750_hw_copyarea(struct lynx_accel *accel,
- unsigned int sBase, unsigned int sPitch,
+ unsigned int source_base, unsigned int source_pitch,
unsigned int sx, unsigned int sy,
- unsigned int dBase, unsigned int dPitch,
- unsigned int Bpp, unsigned int dx, unsigned int dy,
+ unsigned int dest_base, unsigned int dest_pitch,
+ unsigned int bytes_per_pixel, unsigned int dx, unsigned int dy,
unsigned int width, unsigned int height,
unsigned int rop2);
/**
* sm750_hw_imageblit
- * @pSrcbuf: pointer to start of source buffer in system memory
- * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
- *>----- and -ive mean button up
- * @startBit: Mono data can start at any bit in a byte, this value should be
+ * @p_srcbuf: pointer to start of source buffer in system memory
+ * @src_delta: Pitch value (in bytes) of the source buffer, positive means top down
+ *>----- and negative mean bottom up
+ * @start_bit: Mono data can start at any bit in a byte, this value should be
*>----- 0 to 7
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @bytePerPixel: Color depth of destination surface
+ * @dest_base: Address of destination: offset in frame buffer
+ * @dest_pitch: Pitch value of destination surface in BYTE
+ * @byte_per_pixel: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
* @height: height of rectangle in pixel value
- * @fColor: Foreground color (corresponding to a 1 in the monochrome data
- * @bColor: Background color (corresponding to a 0 in the monochrome data
+ * @fg_color: Foreground color (corresponding to a 1 in the monochrome data
+ * @bg_color: Background color (corresponding to a 0 in the monochrome data
* @rop2: ROP value
*/
-int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
- u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
- u32 bytePerPixel, u32 dx, u32 dy, u32 width,
- u32 height, u32 fColor, u32 bColor, u32 rop2);
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_srcbuf,
+ u32 src_delta, u32 start_bit, u32 dest_base, u32 dest_pitch,
+ u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
+ u32 height, u32 fg_color, u32 bg_color, u32 rop2);
#endif
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index a29faee91c78..4e2ca7263254 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -49,19 +49,19 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
}
/* now map mmio and vidmem */
- sm750_dev->pvReg =
+ sm750_dev->p_v_reg =
ioremap(sm750_dev->vidreg_start, sm750_dev->vidreg_size);
- if (!sm750_dev->pvReg) {
+ if (!sm750_dev->p_v_reg) {
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
}
- pr_info("mmio virtual addr = %p\n", sm750_dev->pvReg);
+ pr_info("mmio virtual addr = %p\n", sm750_dev->p_v_reg);
- sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
- sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+ sm750_dev->accel.dpr_base = sm750_dev->p_v_reg + DE_BASE_ADDR_TYPE1;
+ sm750_dev->accel.dp_port_base = sm750_dev->p_v_reg + DE_PORT_ADDR_TYPE1;
- mmio750 = sm750_dev->pvReg;
+ mmio750 = sm750_dev->p_v_reg;
sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -76,15 +76,15 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
sm750_dev->vidmem_start, sm750_dev->vidmem_size);
/* reserve the vidmem space of smi adaptor */
- sm750_dev->pvMem =
+ sm750_dev->p_v_mem =
ioremap_wc(sm750_dev->vidmem_start, sm750_dev->vidmem_size);
- if (!sm750_dev->pvMem) {
- iounmap(sm750_dev->pvReg);
+ if (!sm750_dev->p_v_mem) {
+ iounmap(sm750_dev->p_v_reg);
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
}
- pr_info("video memory vaddr = %p\n", sm750_dev->pvMem);
+ pr_info("video memory vaddr = %p\n", sm750_dev->p_v_mem);
exit:
return ret;
}
@@ -134,12 +134,12 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
~(PANEL_DISPLAY_CTRL_DUAL_DISPLAY |
PANEL_DISPLAY_CTRL_DOUBLE_PIXEL);
switch (sm750_dev->pnltype) {
- case sm750_24TFT:
+ case sm750_24_tft:
break;
- case sm750_doubleTFT:
+ case sm750_double_tft:
val |= PANEL_DISPLAY_CTRL_DOUBLE_PIXEL;
break;
- case sm750_dualTFT:
+ case sm750_dual_tft:
val |= PANEL_DISPLAY_CTRL_DUAL_DISPLAY;
break;
}
--
2.53.0
Powered by blists - more mailing lists