linux-kernel - Re: [PATCH 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b2cbejqrxttssho6j5d62u7mhkc5mn7vybfqlhbs2oeca3oq27@w6ws3ogfuwsg>
Date: Tue, 10 Feb 2026 23:08:46 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Swati Agarwal <swati.agarwal@....qualcomm.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary
 USB controller

On Tue, Feb 10, 2026 at 08:29:50PM +0530, Swati Agarwal wrote:
> On Fri, Feb 6, 2026 at 5:44 PM Dmitry Baryshkov
> <dmitry.baryshkov@....qualcomm.com> wrote:
> >
> > On Fri, Feb 06, 2026 at 04:16:42PM +0530, Swati Agarwal wrote:
> > > Enable the tertiary usb controller connected to micro usb port in OTG mode
> > > on Lemans EVK platform.
> > >
> > > Signed-off-by: Swati Agarwal <swati.agarwal@....qualcomm.com>
> > > ---
> > >  arch/arm64/boot/dts/qcom/lemans-evk.dts | 53 +++++++++++++++++++++++++
> > >  arch/arm64/boot/dts/qcom/lemans.dtsi    |  7 ++++
> > >  2 files changed, 60 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
> > > index 808827b83553..2710927c9172 100644
> > > --- a/arch/arm64/boot/dts/qcom/lemans.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
> > > @@ -4270,7 +4270,14 @@ usb_2: usb@...0000 {
> > >                       snps,dis-u1-entry-quirk;
> > >                       snps,dis-u2-entry-quirk;
> > >
> > > +                     usb-role-switch;
> > >                       status = "disabled";
> > > +
> > > +                     port {
> > > +                             usb_2_dwc3_hs: endpoint {
> > > +                             };
> >
> > Is it USB-2 only? If not, please define both ports.
> Hi Dmitry,
> USB-2 is micro USB having only HS-PHY so only one port is needed.

micro USB is on the connector side. Here you are describing the USB
controller. Is it also HS-only? If the controller supports HS and SS,
you need to have two ports here.

> 
> Regards,
> Swati
> >
> > > +                     };
> > > +
> > >               };
> > >
> > >               tcsr_mutex: hwlock@...0000 {
> > > --
> > > 2.34.1
> > >
> >
> > --
> > With best wishes
> > Dmitry

-- 
With best wishes
Dmitry