linux-kernel - [PATCH] i3c: dw-i3c-master: Set SIR_REJECT in DAT on device attach and reattach

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <8bff67c9df8d56a3d5e0191bc935362ff6d3c573.1770796093.git.adrianhoyin.ng@altera.com>
Date: Wed, 11 Feb 2026 15:49:21 +0800
From: adrianhoyin.ng@...era.com
To: alexandre.belloni@...tlin.com,
	Frank.Li@....com,
	linux-i3c@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Cc: adrianhoyin.ng@...era.com
Subject: [PATCH] i3c: dw-i3c-master: Set SIR_REJECT in DAT on device attach and reattach

From: Adrian Ng Ho Yin <adrianhoyin.ng@...era.com>

The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().

Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is cleared in enable_ibi() after ENEC is issued,
and restored in disable_ibi() after DISEC, keeping the controller
state aligned with the device event configuration.

Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@...era.com>
---
 drivers/i3c/master/dw-i3c-master.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 7eb09ad10171..d014f2cd6071 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -1024,7 +1024,7 @@ static int dw_i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
 		master->free_pos &= ~BIT(pos);
 	}
 
-	writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(dev->info.dyn_addr),
+	writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(dev->info.dyn_addr) | DEV_ADDR_TABLE_SIR_REJECT,
 	       master->regs +
 	       DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index));
 
@@ -1053,7 +1053,7 @@ static int dw_i3c_master_attach_i3c_dev(struct i3c_dev_desc *dev)
 	master->free_pos &= ~BIT(pos);
 	i3c_dev_set_master_data(dev, data);
 
-	writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(master->devs[pos].addr),
+	writel(DEV_ADDR_TABLE_DYNAMIC_ADDR(master->devs[pos].addr) | DEV_ADDR_TABLE_SIR_REJECT,
 	       master->regs +
 	       DEV_ADDR_TABLE_LOC(master->datstartaddr, data->index));
 
-- 
2.49.GIT