netdev - Re: [PATCH 2/10] cxgb3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20061204130934.21b26a74@freekitty>
Date:	Mon, 4 Dec 2006 13:09:34 -0800
From:	Stephen Hemminger <shemminger@...l.org>
To:	Divy Le Ray <None@...lsio.com>
Cc:	jeff@...zik.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/10] cxgb3 - main source file

O
> + * If we have multiple receive queues per port serviced by NAPI we need one
> + * netdevice per queue as NAPI operates on netdevices.  We already have one
> + * netdevice, namely the one associated with the interface, so we use dummy
> + * ones for any additional queues.  Note that these netdevices exist purely
> + * so that NAPI has something to work with, they do not represent network
> + * ports and are not registered.
> + */
> +static int init_dummy_netdevs(struct adapter *adap)
> +{
> +	int i, j, dummy_idx = 0;
> +	struct net_device *nd;
> +
> +	for_each_port(adap, i) {
> +		const struct port_info *pi = &adap->port[i];
> +
> +		for (j = 0; j < pi->nqsets - 1; j++) {
> +			if (!adap->dummy_netdev[dummy_idx]) {
> +				nd = alloc_netdev(0, "", ether_setup);
> +				if (!nd)
> +					goto free_all;
> +
> +				nd->priv = adap;
> +				nd->weight = 64;
> +				set_bit(__LINK_STATE_START, &nd->state);
> +				adap->dummy_netdev[dummy_idx] = nd;
> +			}
> +			strcpy(adap->dummy_netdev[dummy_idx]->name,
> +			       pi->dev->name);
> +			dummy_idx++;
> +		}
> +	}
> +	return 0;
> +
> +free_all:
> +	while (--dummy_idx >= 0) {
> +		free_netdev(adap->dummy_netdev[dummy_idx]);
> +		adap->dummy_netdev[dummy_idx] = NULL;
> +	}
> +	return -ENOMEM;
> +}


I understand this, but it seems more trouble than it is worth
and adds longterm maintance burden to NAPI and receive management code.

You would be better off doing your own scheduling in a tasklet.



> +	case SIOCCHIOCTL:
> +		return cxgb_extension_ioctl(dev, req->ifr_data);


Adding a chelsio specific ioctl value isn't going to get accepted.
You need to use SIOCDEVPRIVATE, and figure out how to do 32bit/64bit
ioctl compatibility for it.

> +#ifdef CONFIG_NET_POLL_CONTROLLER
> +static void cxgb_netpoll(struct net_device *dev)
> +{
> +	unsigned long flags;
> +	struct adapter *adapter = dev->priv;
> +	struct sge_qset *qs = dev2qset(dev);
> +
> +	local_irq_save(flags);
> +	t3_intr_handler(adapter, qs->rspq.polling) (adapter->pdev->irq,
> +						    adapter);
> +	local_irq_restore(flags);
> +}
> +#endif

IRQ's are always disabled when netpoll is called.

> +	for (i = 0; i < ai->nports; ++i) {
> +		struct net_device *netdev;
> +
> +		netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter));
> +		if (!netdev) {
> +			err = -ENOMEM;
> +			goto out_free_dev;
> +		}
> +
> +		if (!adapter) {
> +			adapter = netdev->priv;
> +
> +			adapter->pdev = pdev;
> +			adapter->port[0].dev = netdev;	// so we don't leak it
> +
> +			adapter->regs = ioremap_nocache(mmio_start, mmio_len);
> +			if (!adapter->regs) {
> +				CH_ERR("%s: cannot map device registers\n",
> +				       pci_name(pdev));
> +				err = -ENOMEM;
> +				goto out_free_dev;
> +			}
> +
> +			adapter->name = pci_name(pdev);
> +			adapter->msg_enable = dflt_msg_enable;
> +			adapter->mmio_len = mmio_len;
> +			INIT_LIST_HEAD(&adapter->adapter_list);
> +			mutex_init(&adapter->mdio_lock);
> +			spin_lock_init(&adapter->work_lock);
> +			spin_lock_init(&adapter->stats_lock);
> +
> +			INIT_WORK(&adapter->ext_intr_handler_task,
> +				  ext_intr_task, adapter);
> +			INIT_WORK(&adapter->adap_check_task, t3_adap_check_task,
> +				  adapter);
> +
> +			pci_set_drvdata(pdev, netdev);
> +		}
>

It looks like you are repeating the same method of doing multi-port that you
did on cxgb2. It was wrong then, and it is wrong now:

DON'T
	use if_port to distinguish port. if_port is legacy field see IF_PORT_XXX
	allocate adapter as part of 1st interface
	set dev->priv differently on each port
	don't use array in adapter structure for each port
DO
	allocate adapter separately
	use netdev_priv() for per port data
	use port->adapter for adapter access

	


-- 
Stephen Hemminger <shemminger@...l.org>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html