| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20061211154531.GA23909@havoc.gtf.org>
Date: Mon, 11 Dec 2006 10:45:31 -0500
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...l.org>, Linus Torvalds <torvalds@...l.org>
Cc: netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] net driver updates
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-linus
to receive the following updates:
drivers/net/Kconfig | 8 +
drivers/net/chelsio/cxgb2.c | 23 +-
drivers/net/chelsio/sge.c | 115 ++++-----
drivers/net/chelsio/sge.h | 4
drivers/net/macb.c | 8 -
drivers/net/macb.h | 6
drivers/net/myri10ge/myri10ge.c | 498 ++++++++++++++++++++-------------------
drivers/net/smc91x.h | 90 -------
drivers/net/ucc_geth.c | 12 +
9 files changed, 334 insertions(+), 430 deletions(-)
Brice Goglin:
myri10ge: indentation cleanups
myri10ge: add page-based skb routines
myri10ge: switch to page-based skb
myri10ge: drop contiguous skb routines
myri10ge: Full vlan frame in small_bytes
myri10ge: fix big_bytes in case of vlan frames
myri10ge: update driver version to 1.1.0
Haavard Skinnemoen:
MACB: Use struct delayed_work instead of struct work_struct
MACB: Use __raw register access
Paul Mundt:
smc91x: Kill off excessive versatile hooks.
Scott Wood:
ucc_geth: compilation error fixes
ucc_geth: Initialize mdio_lock.
Stephen Hemminger:
chelsio: working NAPI
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9de0eed..8aa8dd0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2384,6 +2384,14 @@ config CHELSIO_T1_1G
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
+config CHELSIO_T1_NAPI
+ bool "Use Rx Polling (NAPI)"
+ depends on CHELSIO_T1
+ default y
+ help
+ NAPI is a driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card.
+
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index de48ead..fd5d821 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -220,9 +220,8 @@ static int cxgb_up(struct adapter *adapt
t1_interrupts_clear(adapter);
- adapter->params.has_msi = !disable_msi && pci_enable_msi(adapter->pdev) == 0;
- err = request_irq(adapter->pdev->irq,
- t1_select_intr_handler(adapter),
+ adapter->params.has_msi = !disable_msi && !pci_enable_msi(adapter->pdev);
+ err = request_irq(adapter->pdev->irq, t1_interrupt,
adapter->params.has_msi ? 0 : IRQF_SHARED,
adapter->name, adapter);
if (err) {
@@ -764,18 +763,7 @@ static int set_coalesce(struct net_devic
{
struct adapter *adapter = dev->priv;
- /*
- * If RX coalescing is requested we use NAPI, otherwise interrupts.
- * This choice can be made only when all ports and the TOE are off.
- */
- if (adapter->open_device_map == 0)
- adapter->params.sge.polling = c->use_adaptive_rx_coalesce;
-
- if (adapter->params.sge.polling) {
- adapter->params.sge.rx_coalesce_usecs = 0;
- } else {
- adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
- }
+ adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
@@ -944,7 +932,7 @@ static void t1_netpoll(struct net_device
struct adapter *adapter = dev->priv;
local_irq_save(flags);
- t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter);
+ t1_interrupt(adapter->pdev->irq, adapter);
local_irq_restore(flags);
}
#endif
@@ -1165,7 +1153,10 @@ #endif
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = t1_netpoll;
#endif
+#ifdef CONFIG_CHELSIO_T1_NAPI
netdev->weight = 64;
+ netdev->poll = t1_poll;
+#endif
SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops);
}
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 0ca8d87..659cb22 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1413,16 +1413,20 @@ static int sge_rx(struct sge *sge, struc
if (unlikely(adapter->vlan_grp && p->vlan_valid)) {
st->vlan_xtract++;
- if (adapter->params.sge.polling)
+#ifdef CONFIG_CHELSIO_T1_NAPI
vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
ntohs(p->vlan));
- else
+#else
vlan_hwaccel_rx(skb, adapter->vlan_grp,
ntohs(p->vlan));
- } else if (adapter->params.sge.polling)
+#endif
+ } else {
+#ifdef CONFIG_CHELSIO_T1_NAPI
netif_receive_skb(skb);
- else
+#else
netif_rx(skb);
+#endif
+ }
return 0;
}
@@ -1572,6 +1576,7 @@ static int process_responses(struct adap
return budget;
}
+#ifdef CONFIG_CHELSIO_T1_NAPI
/*
* A simpler version of process_responses() that handles only pure (i.e.,
* non data-carrying) responses. Such respones are too light-weight to justify
@@ -1619,92 +1624,76 @@ static int process_pure_responses(struct
* or protection from interrupts as data interrupts are off at this point and
* other adapter interrupts do not interfere.
*/
-static int t1_poll(struct net_device *dev, int *budget)
+int t1_poll(struct net_device *dev, int *budget)
{
struct adapter *adapter = dev->priv;
int effective_budget = min(*budget, dev->quota);
-
int work_done = process_responses(adapter, effective_budget);
+
*budget -= work_done;
dev->quota -= work_done;
if (work_done >= effective_budget)
return 1;
+ spin_lock_irq(&adapter->async_lock);
__netif_rx_complete(dev);
-
- /*
- * Because we don't atomically flush the following write it is
- * possible that in very rare cases it can reach the device in a way
- * that races with a new response being written plus an error interrupt
- * causing the NAPI interrupt handler below to return unhandled status
- * to the OS. To protect against this would require flushing the write
- * and doing both the write and the flush with interrupts off. Way too
- * expensive and unjustifiable given the rarity of the race.
- */
writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
- return 0;
-}
+ writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+ adapter->regs + A_PL_ENABLE);
+ spin_unlock_irq(&adapter->async_lock);
-/*
- * Returns true if the device is already scheduled for polling.
- */
-static inline int napi_is_scheduled(struct net_device *dev)
-{
- return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
+ return 0;
}
/*
* NAPI version of the main interrupt handler.
*/
-static irqreturn_t t1_interrupt_napi(int irq, void *data)
+irqreturn_t t1_interrupt(int irq, void *data)
{
- int handled;
struct adapter *adapter = data;
+ struct net_device *dev = adapter->sge->netdev;
struct sge *sge = adapter->sge;
- struct respQ *q = &adapter->sge->respQ;
+ u32 cause;
+ int handled = 0;
- /*
- * Clear the SGE_DATA interrupt first thing. Normally the NAPI
- * handler has control of the response queue and the interrupt handler
- * can look at the queue reliably only once it knows NAPI is off.
- * We can't wait that long to clear the SGE_DATA interrupt because we
- * could race with t1_poll rearming the SGE interrupt, so we need to
- * clear the interrupt speculatively and really early on.
- */
- writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+ cause = readl(adapter->regs + A_PL_CAUSE);
+ if (cause == 0 || cause == ~0)
+ return IRQ_NONE;
spin_lock(&adapter->async_lock);
- if (!napi_is_scheduled(sge->netdev)) {
+ if (cause & F_PL_INTR_SGE_DATA) {
+ struct respQ *q = &adapter->sge->respQ;
struct respQ_e *e = &q->entries[q->cidx];
- if (e->GenerationBit == q->genbit) {
- if (e->DataValid ||
- process_pure_responses(adapter, e)) {
- if (likely(__netif_rx_schedule_prep(sge->netdev)))
- __netif_rx_schedule(sge->netdev);
- else if (net_ratelimit())
- printk(KERN_INFO
- "NAPI schedule failure!\n");
- } else
- writel(q->cidx, adapter->regs + A_SG_SLEEPING);
-
- handled = 1;
- goto unlock;
- } else
- writel(q->cidx, adapter->regs + A_SG_SLEEPING);
- } else if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) {
- printk(KERN_ERR "data interrupt while NAPI running\n");
- }
-
- handled = t1_slow_intr_handler(adapter);
+ handled = 1;
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+ if (e->GenerationBit == q->genbit &&
+ __netif_rx_schedule_prep(dev)) {
+ if (e->DataValid || process_pure_responses(adapter, e)) {
+ /* mask off data IRQ */
+ writel(adapter->slow_intr_mask,
+ adapter->regs + A_PL_ENABLE);
+ __netif_rx_schedule(sge->netdev);
+ goto unlock;
+ }
+ /* no data, no NAPI needed */
+ netif_poll_enable(dev);
+
+ }
+ writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+ } else
+ handled = t1_slow_intr_handler(adapter);
+
if (!handled)
sge->stats.unhandled_irqs++;
- unlock:
+unlock:
spin_unlock(&adapter->async_lock);
return IRQ_RETVAL(handled != 0);
}
+#else
/*
* Main interrupt handler, optimized assuming that we took a 'DATA'
* interrupt.
@@ -1720,7 +1709,7 @@ static irqreturn_t t1_interrupt_napi(int
* 5. If we took an interrupt, but no valid respQ descriptors was found we
* let the slow_intr_handler run and do error handling.
*/
-static irqreturn_t t1_interrupt(int irq, void *cookie)
+irqreturn_t t1_interrupt(int irq, void *cookie)
{
int work_done;
struct respQ_e *e;
@@ -1752,11 +1741,7 @@ static irqreturn_t t1_interrupt(int irq,
spin_unlock(&adapter->async_lock);
return IRQ_RETVAL(work_done != 0);
}
-
-irq_handler_t t1_select_intr_handler(adapter_t *adapter)
-{
- return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt;
-}
+#endif
/*
* Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
@@ -2033,7 +2018,6 @@ static void sge_tx_reclaim_cb(unsigned l
*/
int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p)
{
- sge->netdev->poll = t1_poll;
sge->fixed_intrtimer = p->rx_coalesce_usecs *
core_ticks_per_usec(sge->adapter);
writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER);
@@ -2234,7 +2218,6 @@ struct sge * __devinit t1_sge_create(str
p->coalesce_enable = 0;
p->sample_interval_usecs = 0;
- p->polling = 0;
return sge;
nomem_port:
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h
index 7ceb011..d132a0e 100644
--- a/drivers/net/chelsio/sge.h
+++ b/drivers/net/chelsio/sge.h
@@ -76,7 +76,9 @@ struct sge *t1_sge_create(struct adapter
int t1_sge_configure(struct sge *, struct sge_params *);
int t1_sge_set_coalesce_params(struct sge *, struct sge_params *);
void t1_sge_destroy(struct sge *);
-irq_handler_t t1_select_intr_handler(adapter_t *adapter);
+irqreturn_t t1_interrupt(int irq, void *cookie);
+int t1_poll(struct net_device *, int *);
+
int t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
void t1_set_vlan_accel(struct adapter *adapter, int on_off);
void t1_sge_start(struct sge *);
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index bd0ce98..25b559b 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -264,12 +264,12 @@ static void macb_update_stats(struct mac
WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4);
for(; p < end; p++, reg++)
- *p += readl(reg);
+ *p += __raw_readl(reg);
}
-static void macb_periodic_task(void *arg)
+static void macb_periodic_task(struct work_struct *work)
{
- struct macb *bp = arg;
+ struct macb *bp = container_of(work, struct macb, periodic_task.work);
macb_update_stats(bp);
macb_check_media(bp, 1, 0);
@@ -1088,7 +1088,7 @@ static int __devinit macb_probe(struct p
dev->base_addr = regs->start;
- INIT_WORK(&bp->periodic_task, macb_periodic_task, bp);
+ INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
mutex_init(&bp->mdio_mutex);
init_completion(&bp->mdio_complete);
diff --git a/drivers/net/macb.h b/drivers/net/macb.h
index 8c253db..27bf0ae 100644
--- a/drivers/net/macb.h
+++ b/drivers/net/macb.h
@@ -250,9 +250,9 @@ #define MACB_BFINS(name,value,old) \
/* Register access macros */
#define macb_readl(port,reg) \
- readl((port)->regs + MACB_##reg)
+ __raw_readl((port)->regs + MACB_##reg)
#define macb_writel(port,reg,value) \
- writel((value), (port)->regs + MACB_##reg)
+ __raw_writel((value), (port)->regs + MACB_##reg)
struct dma_desc {
u32 addr;
@@ -377,7 +377,7 @@ struct macb {
unsigned int rx_pending, tx_pending;
- struct work_struct periodic_task;
+ struct delayed_work periodic_task;
struct mutex mdio_mutex;
struct completion mdio_complete;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 81f127a..94ac168 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -71,7 +71,7 @@ #endif
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.0.0"
+#define MYRI10GE_VERSION_STR "1.1.0"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@...i.com");
@@ -92,8 +92,13 @@ #define MYRI10GE_MAX_SEND_DESC_TSO ((655
#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
+#define MYRI10GE_ALLOC_ORDER 0
+#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
+#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
+
struct myri10ge_rx_buffer_state {
- struct sk_buff *skb;
+ struct page *page;
+ int page_offset;
DECLARE_PCI_UNMAP_ADDR(bus)
DECLARE_PCI_UNMAP_LEN(len)
};
@@ -116,9 +121,14 @@ struct myri10ge_rx_buf {
u8 __iomem *wc_fifo; /* w/c rx dma addr fifo address */
struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
struct myri10ge_rx_buffer_state *info;
+ struct page *page;
+ dma_addr_t bus;
+ int page_offset;
int cnt;
+ int fill_cnt;
int alloc_fail;
int mask; /* number of rx slots -1 */
+ int watchdog_needed;
};
struct myri10ge_tx_buf {
@@ -150,6 +160,7 @@ struct myri10ge_priv {
struct myri10ge_rx_buf rx_big;
struct myri10ge_rx_done rx_done;
int small_bytes;
+ int big_bytes;
struct net_device *dev;
struct net_device_stats stats;
u8 __iomem *sram;
@@ -238,11 +249,6 @@ module_param(myri10ge_force_firmware, in
MODULE_PARM_DESC(myri10ge_force_firmware,
"Force firmware to assume aligned completions\n");
-static int myri10ge_skb_cross_4k = 0;
-module_param(myri10ge_skb_cross_4k, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(myri10ge_skb_cross_4k,
- "Can a small skb cross a 4KB boundary?\n");
-
static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
module_param(myri10ge_initial_mtu, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU\n");
@@ -266,6 +272,10 @@ static int myri10ge_debug = -1; /* defau
module_param(myri10ge_debug, int, 0);
MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
+static int myri10ge_fill_thresh = 256;
+module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
+
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -273,9 +283,9 @@ #define MYRI10GE_LOWPART_TO_U32(X) ((u32
#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
-static inline void put_be32(__be32 val, __be32 __iomem *p)
+static inline void put_be32(__be32 val, __be32 __iomem * p)
{
- __raw_writel((__force __u32)val, (__force void __iomem *)p);
+ __raw_writel((__force __u32) val, (__force void __iomem *)p);
}
static int
@@ -804,194 +814,179 @@ myri10ge_submit_8rx(struct mcp_kreq_ethe
mb();
}
-/*
- * Set of routines to get a new receive buffer. Any buffer which
- * crosses a 4KB boundary must start on a 4KB boundary due to PCIe
- * wdma restrictions. We also try to align any smaller allocation to
- * at least a 16 byte boundary for efficiency. We assume the linux
- * memory allocator works by powers of 2, and will not return memory
- * smaller than 2KB which crosses a 4KB boundary. If it does, we fall
- * back to allocating 2x as much space as required.
- *
- * We intend to replace large (>4KB) skb allocations by using
- * pages directly and building a fraglist in the near future.
- */
-
-static inline struct sk_buff *myri10ge_alloc_big(struct net_device *dev,
- int bytes)
-{
- struct sk_buff *skb;
- unsigned long data, roundup;
-
- skb = netdev_alloc_skb(dev, bytes + 4096 + MXGEFW_PAD);
- if (skb == NULL)
- return NULL;
-
- /* Correct skb->truesize so that socket buffer
- * accounting is not confused the rounding we must
- * do to satisfy alignment constraints.
- */
- skb->truesize -= 4096;
-
- data = (unsigned long)(skb->data);
- roundup = (-data) & (4095);
- skb_reserve(skb, roundup);
- return skb;
-}
-
-/* Allocate 2x as much space as required and use whichever portion
- * does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small_safe(struct net_device *dev,
- unsigned int bytes)
+static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
{
- struct sk_buff *skb;
- unsigned long data, boundary;
-
- skb = netdev_alloc_skb(dev, 2 * (bytes + MXGEFW_PAD) - 1);
- if (unlikely(skb == NULL))
- return NULL;
-
- /* Correct skb->truesize so that socket buffer
- * accounting is not confused the rounding we must
- * do to satisfy alignment constraints.
- */
- skb->truesize -= bytes + MXGEFW_PAD;
-
- data = (unsigned long)(skb->data);
- boundary = (data + 4095UL) & ~4095UL;
- if ((boundary - data) >= (bytes + MXGEFW_PAD))
- return skb;
+ struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
- skb_reserve(skb, boundary - data);
- return skb;
+ if ((skb->protocol == htons(ETH_P_8021Q)) &&
+ (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
+ vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
+ skb->csum = hw_csum;
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
}
-/* Allocate just enough space, and verify that the allocated
- * space does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small(struct net_device *dev,
- int bytes)
+static inline void
+myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
+ struct skb_frag_struct *rx_frags, int len, int hlen)
{
- struct sk_buff *skb;
- unsigned long roundup, data, end;
-
- skb = netdev_alloc_skb(dev, bytes + 16 + MXGEFW_PAD);
- if (unlikely(skb == NULL))
- return NULL;
-
- /* Round allocated buffer to 16 byte boundary */
- data = (unsigned long)(skb->data);
- roundup = (-data) & 15UL;
- skb_reserve(skb, roundup);
- /* Verify that the data buffer does not cross a page boundary */
- data = (unsigned long)(skb->data);
- end = data + bytes + MXGEFW_PAD - 1;
- if (unlikely(((end >> 12) != (data >> 12)) && (data & 4095UL))) {
- printk(KERN_NOTICE
- "myri10ge_alloc_small: small skb crossed 4KB boundary\n");
- myri10ge_skb_cross_4k = 1;
- dev_kfree_skb_any(skb);
- skb = myri10ge_alloc_small_safe(dev, bytes);
- }
- return skb;
+ struct skb_frag_struct *skb_frags;
+
+ skb->len = skb->data_len = len;
+ skb->truesize = len + sizeof(struct sk_buff);
+ /* attach the page(s) */
+
+ skb_frags = skb_shinfo(skb)->frags;
+ while (len > 0) {
+ memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
+ len -= rx_frags->size;
+ skb_frags++;
+ rx_frags++;
+ skb_shinfo(skb)->nr_frags++;
+ }
+
+ /* pskb_may_pull is not available in irq context, but
+ * skb_pull() (for ether_pad and eth_type_trans()) requires
+ * the beginning of the packet in skb_headlen(), move it
+ * manually */
+ memcpy(skb->data, va, hlen);
+ skb_shinfo(skb)->frags[0].page_offset += hlen;
+ skb_shinfo(skb)->frags[0].size -= hlen;
+ skb->data_len -= hlen;
+ skb->tail += hlen;
+ skb_pull(skb, MXGEFW_PAD);
}
-static inline int
-myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct myri10ge_priv *mgp,
- int bytes, int idx)
+static void
+myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
+ int bytes, int watchdog)
{
- struct net_device *dev = mgp->dev;
- struct pci_dev *pdev = mgp->pdev;
- struct sk_buff *skb;
- dma_addr_t bus;
- int len, retval = 0;
+ struct page *page;
+ int idx;
- bytes += VLAN_HLEN; /* account for 802.1q vlan tag */
+ if (unlikely(rx->watchdog_needed && !watchdog))
+ return;
- if ((bytes + MXGEFW_PAD) > (4096 - 16) /* linux overhead */ )
- skb = myri10ge_alloc_big(dev, bytes);
- else if (myri10ge_skb_cross_4k)
- skb = myri10ge_alloc_small_safe(dev, bytes);
- else
- skb = myri10ge_alloc_small(dev, bytes);
+ /* try to refill entire ring */
+ while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
+ idx = rx->fill_cnt & rx->mask;
- if (unlikely(skb == NULL)) {
- rx->alloc_fail++;
- retval = -ENOBUFS;
- goto done;
- }
-
- /* set len so that it only covers the area we
- * need mapped for DMA */
- len = bytes + MXGEFW_PAD;
-
- bus = pci_map_single(pdev, skb->data, len, PCI_DMA_FROMDEVICE);
- rx->info[idx].skb = skb;
- pci_unmap_addr_set(&rx->info[idx], bus, bus);
- pci_unmap_len_set(&rx->info[idx], len, len);
- rx->shadow[idx].addr_low = htonl(MYRI10GE_LOWPART_TO_U32(bus));
- rx->shadow[idx].addr_high = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
-
-done:
- /* copy 8 descriptors (64-bytes) to the mcp at a time */
- if ((idx & 7) == 7) {
- if (rx->wc_fifo == NULL)
- myri10ge_submit_8rx(&rx->lanai[idx - 7],
- &rx->shadow[idx - 7]);
- else {
- mb();
- myri10ge_pio_copy(rx->wc_fifo,
- &rx->shadow[idx - 7], 64);
+ if ((bytes < MYRI10GE_ALLOC_SIZE / 2) &&
+ (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE)) {
+ /* we can use part of previous page */
+ get_page(rx->page);
+ } else {
+ /* we need a new page */
+ page =
+ alloc_pages(GFP_ATOMIC | __GFP_COMP,
+ MYRI10GE_ALLOC_ORDER);
+ if (unlikely(page == NULL)) {
+ if (rx->fill_cnt - rx->cnt < 16)
+ rx->watchdog_needed = 1;
+ return;
+ }
+ rx->page = page;
+ rx->page_offset = 0;
+ rx->bus = pci_map_page(mgp->pdev, page, 0,
+ MYRI10GE_ALLOC_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+ rx->info[idx].page = rx->page;
+ rx->info[idx].page_offset = rx->page_offset;
+ /* note that this is the address of the start of the
+ * page */
+ pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
+ rx->shadow[idx].addr_low =
+ htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
+ rx->shadow[idx].addr_high =
+ htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
+
+ /* start next packet on a cacheline boundary */
+ rx->page_offset += SKB_DATA_ALIGN(bytes);
+ rx->fill_cnt++;
+
+ /* copy 8 descriptors to the firmware at a time */
+ if ((idx & 7) == 7) {
+ if (rx->wc_fifo == NULL)
+ myri10ge_submit_8rx(&rx->lanai[idx - 7],
+ &rx->shadow[idx - 7]);
+ else {
+ mb();
+ myri10ge_pio_copy(rx->wc_fifo,
+ &rx->shadow[idx - 7], 64);
+ }
}
}
- return retval;
}
-static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
+static inline void
+myri10ge_unmap_rx_page(struct pci_dev *pdev,
+ struct myri10ge_rx_buffer_state *info, int bytes)
{
- struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
-
- if ((skb->protocol == htons(ETH_P_8021Q)) &&
- (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
- vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
- skb->csum = hw_csum;
- skb->ip_summed = CHECKSUM_COMPLETE;
+ /* unmap the recvd page if we're the only or last user of it */
+ if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
+ (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
+ pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
+ & ~(MYRI10GE_ALLOC_SIZE - 1)),
+ MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
}
}
-static inline unsigned long
+#define MYRI10GE_HLEN 64 /* The number of bytes to copy from a
+ * page into an skb */
+
+static inline int
myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
int bytes, int len, __wsum csum)
{
- dma_addr_t bus;
struct sk_buff *skb;
- int idx, unmap_len;
+ struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
+ int i, idx, hlen, remainder;
+ struct pci_dev *pdev = mgp->pdev;
+ struct net_device *dev = mgp->dev;
+ u8 *va;
+ len += MXGEFW_PAD;
idx = rx->cnt & rx->mask;
- rx->cnt++;
+ va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
+ prefetch(va);
+ /* Fill skb_frag_struct(s) with data from our receive */
+ for (i = 0, remainder = len; remainder > 0; i++) {
+ myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
+ rx_frags[i].page = rx->info[idx].page;
+ rx_frags[i].page_offset = rx->info[idx].page_offset;
+ if (remainder < MYRI10GE_ALLOC_SIZE)
+ rx_frags[i].size = remainder;
+ else
+ rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
+ rx->cnt++;
+ idx = rx->cnt & rx->mask;
+ remainder -= MYRI10GE_ALLOC_SIZE;
+ }
+
+ hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
- /* save a pointer to the received skb */
- skb = rx->info[idx].skb;
- bus = pci_unmap_addr(&rx->info[idx], bus);
- unmap_len = pci_unmap_len(&rx->info[idx], len);
+ /* allocate an skb to attach the page(s) to. */
- /* try to replace the received skb */
- if (myri10ge_getbuf(rx, mgp, bytes, idx)) {
- /* drop the frame -- the old skbuf is re-cycled */
- mgp->stats.rx_dropped += 1;
+ skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
+ if (unlikely(skb == NULL)) {
+ mgp->stats.rx_dropped++;
+ do {
+ i--;
+ put_page(rx_frags[i].page);
+ } while (i != 0);
return 0;
}
- /* unmap the recvd skb */
- pci_unmap_single(mgp->pdev, bus, unmap_len, PCI_DMA_FROMDEVICE);
-
- /* mcp implicitly skips 1st bytes so that packet is properly
- * aligned */
- skb_reserve(skb, MXGEFW_PAD);
-
- /* set the length of the frame */
- skb_put(skb, len);
+ /* Attach the pages to the skb, and trim off any padding */
+ myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
+ if (skb_shinfo(skb)->frags[0].size <= 0) {
+ put_page(skb_shinfo(skb)->frags[0].page);
+ skb_shinfo(skb)->nr_frags = 0;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->dev = dev;
- skb->protocol = eth_type_trans(skb, mgp->dev);
if (mgp->csum_flag) {
if ((skb->protocol == htons(ETH_P_IP)) ||
(skb->protocol == htons(ETH_P_IPV6))) {
@@ -1000,9 +995,8 @@ myri10ge_rx_done(struct myri10ge_priv *m
} else
myri10ge_vlan_ip_csum(skb, csum);
}
-
netif_receive_skb(skb);
- mgp->dev->last_rx = jiffies;
+ dev->last_rx = jiffies;
return 1;
}
@@ -1079,7 +1073,7 @@ static inline void myri10ge_clean_rx_don
length, checksum);
else
rx_ok = myri10ge_rx_done(mgp, &mgp->rx_big,
- mgp->dev->mtu + ETH_HLEN,
+ mgp->big_bytes,
length, checksum);
rx_packets += rx_ok;
rx_bytes += rx_ok * (unsigned long)length;
@@ -1094,6 +1088,14 @@ static inline void myri10ge_clean_rx_don
rx_done->cnt = cnt;
mgp->stats.rx_packets += rx_packets;
mgp->stats.rx_bytes += rx_bytes;
+
+ /* restock receive rings if needed */
+ if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 0);
+ if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
+
}
static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
@@ -1484,56 +1486,48 @@ static int myri10ge_allocate_rings(struc
goto abort_with_rx_small_info;
/* Fill the receive rings */
+ mgp->rx_big.cnt = 0;
+ mgp->rx_small.cnt = 0;
+ mgp->rx_big.fill_cnt = 0;
+ mgp->rx_small.fill_cnt = 0;
+ mgp->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
+ mgp->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
+ mgp->rx_small.watchdog_needed = 0;
+ mgp->rx_big.watchdog_needed = 0;
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 0);
- for (i = 0; i <= mgp->rx_small.mask; i++) {
- status = myri10ge_getbuf(&mgp->rx_small, mgp,
- mgp->small_bytes, i);
- if (status) {
- printk(KERN_ERR
- "myri10ge: %s: alloced only %d small bufs\n",
- dev->name, i);
- goto abort_with_rx_small_ring;
- }
+ if (mgp->rx_small.fill_cnt < mgp->rx_small.mask + 1) {
+ printk(KERN_ERR "myri10ge: %s: alloced only %d small bufs\n",
+ dev->name, mgp->rx_small.fill_cnt);
+ goto abort_with_rx_small_ring;
}
- for (i = 0; i <= mgp->rx_big.mask; i++) {
- status =
- myri10ge_getbuf(&mgp->rx_big, mgp, dev->mtu + ETH_HLEN, i);
- if (status) {
- printk(KERN_ERR
- "myri10ge: %s: alloced only %d big bufs\n",
- dev->name, i);
- goto abort_with_rx_big_ring;
- }
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
+ if (mgp->rx_big.fill_cnt < mgp->rx_big.mask + 1) {
+ printk(KERN_ERR "myri10ge: %s: alloced only %d big bufs\n",
+ dev->name, mgp->rx_big.fill_cnt);
+ goto abort_with_rx_big_ring;
}
return 0;
abort_with_rx_big_ring:
- for (i = 0; i <= mgp->rx_big.mask; i++) {
- if (mgp->rx_big.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_big.info[i].skb);
- if (pci_unmap_len(&mgp->rx_big.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_big.info[i],
- bus),
- pci_unmap_len(&mgp->rx_big.info[i],
- len),
- PCI_DMA_FROMDEVICE);
+ for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
+ int idx = i & mgp->rx_big.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
+ mgp->big_bytes);
+ put_page(mgp->rx_big.info[idx].page);
}
abort_with_rx_small_ring:
- for (i = 0; i <= mgp->rx_small.mask; i++) {
- if (mgp->rx_small.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_small.info[i].skb);
- if (pci_unmap_len(&mgp->rx_small.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_small.info[i],
- bus),
- pci_unmap_len(&mgp->rx_small.info[i],
- len),
- PCI_DMA_FROMDEVICE);
+ for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
+ int idx = i & mgp->rx_small.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
+ mgp->small_bytes + MXGEFW_PAD);
+ put_page(mgp->rx_small.info[idx].page);
}
+
kfree(mgp->rx_big.info);
abort_with_rx_small_info:
@@ -1566,30 +1560,24 @@ static void myri10ge_free_rings(struct n
mgp = netdev_priv(dev);
- for (i = 0; i <= mgp->rx_big.mask; i++) {
- if (mgp->rx_big.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_big.info[i].skb);
- if (pci_unmap_len(&mgp->rx_big.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_big.info[i],
- bus),
- pci_unmap_len(&mgp->rx_big.info[i],
- len),
- PCI_DMA_FROMDEVICE);
- }
-
- for (i = 0; i <= mgp->rx_small.mask; i++) {
- if (mgp->rx_small.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_small.info[i].skb);
- if (pci_unmap_len(&mgp->rx_small.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_small.info[i],
- bus),
- pci_unmap_len(&mgp->rx_small.info[i],
- len),
- PCI_DMA_FROMDEVICE);
+ for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
+ idx = i & mgp->rx_big.mask;
+ if (i == mgp->rx_big.fill_cnt - 1)
+ mgp->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
+ mgp->big_bytes);
+ put_page(mgp->rx_big.info[idx].page);
}
+ for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
+ idx = i & mgp->rx_small.mask;
+ if (i == mgp->rx_small.fill_cnt - 1)
+ mgp->rx_small.info[idx].page_offset =
+ MYRI10GE_ALLOC_SIZE;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
+ mgp->small_bytes + MXGEFW_PAD);
+ put_page(mgp->rx_small.info[idx].page);
+ }
tx = &mgp->tx;
while (tx->done != tx->req) {
idx = tx->done & tx->mask;
@@ -1657,19 +1645,18 @@ static int myri10ge_open(struct net_devi
*/
if (dev->mtu <= ETH_DATA_LEN)
- mgp->small_bytes = 128; /* enough for a TCP header */
+ /* enough for a TCP header */
+ mgp->small_bytes = (128 > SMP_CACHE_BYTES)
+ ? (128 - MXGEFW_PAD)
+ : (SMP_CACHE_BYTES - MXGEFW_PAD);
else
- mgp->small_bytes = ETH_FRAME_LEN; /* enough for an ETH_DATA_LEN frame */
+ /* enough for a vlan encapsulated ETH_DATA_LEN frame */
+ mgp->small_bytes = VLAN_ETH_FRAME_LEN;
/* Override the small buffer size? */
if (myri10ge_small_bytes > 0)
mgp->small_bytes = myri10ge_small_bytes;
- /* If the user sets an obscenely small MTU, adjust the small
- * bytes down to nearly nothing */
- if (mgp->small_bytes >= (dev->mtu + ETH_HLEN))
- mgp->small_bytes = 64;
-
/* get the lanai pointers to the send and receive rings */
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0);
@@ -1705,17 +1692,23 @@ static int myri10ge_open(struct net_devi
mgp->rx_big.wc_fifo = NULL;
}
- status = myri10ge_allocate_rings(dev);
- if (status != 0)
- goto abort_with_nothing;
-
/* Firmware needs the big buff size as a power of 2. Lie and
* tell him the buffer is larger, because we only use 1
* buffer/pkt, and the mtu will prevent overruns.
*/
- big_pow2 = dev->mtu + ETH_HLEN + MXGEFW_PAD;
- while ((big_pow2 & (big_pow2 - 1)) != 0)
- big_pow2++;
+ big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
+ if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
+ while ((big_pow2 & (big_pow2 - 1)) != 0)
+ big_pow2++;
+ mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
+ } else {
+ big_pow2 = MYRI10GE_ALLOC_SIZE;
+ mgp->big_bytes = big_pow2;
+ }
+
+ status = myri10ge_allocate_rings(dev);
+ if (status != 0)
+ goto abort_with_nothing;
/* now give firmware buffers sizes, and MTU */
cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
@@ -2206,7 +2199,7 @@ static void myri10ge_set_multicast_list(
struct myri10ge_cmd cmd;
struct myri10ge_priv *mgp;
struct dev_mc_list *mc_list;
- __be32 data[2] = {0, 0};
+ __be32 data[2] = { 0, 0 };
int err;
mgp = netdev_priv(dev);
@@ -2625,7 +2618,7 @@ static u32 myri10ge_read_reboot(struct m
static void myri10ge_watchdog(struct work_struct *work)
{
struct myri10ge_priv *mgp =
- container_of(work, struct myri10ge_priv, watchdog_work);
+ container_of(work, struct myri10ge_priv, watchdog_work);
u32 reboot;
int status;
u16 cmd, vendor;
@@ -2698,6 +2691,21 @@ static void myri10ge_watchdog_timer(unsi
struct myri10ge_priv *mgp;
mgp = (struct myri10ge_priv *)arg;
+
+ if (mgp->rx_small.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 1);
+ if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt >=
+ myri10ge_fill_thresh)
+ mgp->rx_small.watchdog_needed = 0;
+ }
+ if (mgp->rx_big.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 1);
+ if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt >=
+ myri10ge_fill_thresh)
+ mgp->rx_big.watchdog_needed = 0;
+ }
+
if (mgp->tx.req != mgp->tx.done &&
mgp->tx.done == mgp->watchdog_tx_done &&
mgp->watchdog_tx_req != mgp->watchdog_tx_done)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 9367c57..d2767e6 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -362,96 +362,6 @@ #define SMC_outsl(a, r, p, l) writesl((a
#define SMC_IRQ_FLAGS (0)
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
#else
#define SMC_CAN_USE_8BIT 1
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 1f05511..8243150 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -194,9 +194,9 @@ static void enqueue(struct list_head *no
{
unsigned long flags;
- spin_lock_irqsave(ugeth_lock, flags);
+ spin_lock_irqsave(&ugeth_lock, flags);
list_add_tail(node, lh);
- spin_unlock_irqrestore(ugeth_lock, flags);
+ spin_unlock_irqrestore(&ugeth_lock, flags);
}
#endif /* CONFIG_UGETH_FILTERING */
@@ -204,14 +204,14 @@ static struct list_head *dequeue(struct
{
unsigned long flags;
- spin_lock_irqsave(ugeth_lock, flags);
+ spin_lock_irqsave(&ugeth_lock, flags);
if (!list_empty(lh)) {
struct list_head *node = lh->next;
list_del(node);
- spin_unlock_irqrestore(ugeth_lock, flags);
+ spin_unlock_irqrestore(&ugeth_lock, flags);
return node;
} else {
- spin_unlock_irqrestore(ugeth_lock, flags);
+ spin_unlock_irqrestore(&ugeth_lock, flags);
return NULL;
}
}
@@ -1852,6 +1852,8 @@ static int init_phy(struct net_device *d
mii_info->mdio_read = &read_phy_reg;
mii_info->mdio_write = &write_phy_reg;
+ spin_lock_init(&mii_info->mdio_lock);
+
ugeth->mii_info = mii_info;
spin_lock_irq(&ugeth->lock);
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists