[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20070104153949.GA27978@suse.de>
Date: Thu, 4 Jan 2007 16:39:49 +0100
From: Olaf Kirch <okir@...e.de>
To: netdev@...r.kernel.org
Subject: [RFC] natsemi cable length woes
Here's a proposed patch that addresses a problem with natsemi
NICs and long cables we've been chasing (*sigh*).
I'm interested in feedback on how to fix this sanely.
Olaf
------------------------------------------------------------------
From: Olaf Kirch <okir@...e.de>
Subject: natsemi: make cable length magic configurable
We had a customer report concerning problems with a Natsemi DP83815-D
and long cables. With 100m cables, the network would be essentially dead,
not a single packet would get through either way. We had to apply the
patch below to make it work.
The patch adds a module parameter named "no_cable_magic" that does
two things:
- Unconditionally set the DSPCFG register to the
fixed value. Without this change, the chip apparently
never completes autonegotiation in the tested configuration.
This has been an unconditional assignment for a long time,
until this was changed in 2.6.11 (there's an interesting
explanation in the ChangeLog, bk commit is
5871b81bf2b5cf188deab0d414dce104fcb69ca6)
- skip the bit banging in {,un}do_cable_magic. It seems that
if we write the DSPCFG register as above, a rev D chip will report
all cables as "short cables", which do_cable_magic detects, and
trying to be helpful it will "fix" the attenuation coefficient.
I admit the use of a module parameter is ugly, but I didn't find a sane
way to fix this - especially since the magic registers we're changing
are kind of underdocumented.
Signed-off-by: Olaf Kirch <okir@...e.de>
drivers/net/natsemi.c | 11 ++++++++---
1 files changed, 8 insertions(+), 3 deletions(-)
Index: linux-2.6.19/drivers/net/natsemi.c
===================================================================
--- linux-2.6.19.orig/drivers/net/natsemi.c
+++ linux-2.6.19/drivers/net/natsemi.c
@@ -72,6 +72,7 @@
static int debug = -1;
static int mtu;
+static int no_cable_magic;
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
This chip uses a 512 element hash table based on the Ethernet CRC. */
@@ -139,6 +140,7 @@ MODULE_LICENSE("GPL");
module_param(mtu, int, 0);
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
+module_param(no_cable_magic, int, 0);
module_param_array(options, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
@@ -148,6 +150,9 @@ MODULE_PARM_DESC(rx_copybreak,
MODULE_PARM_DESC(options,
"DP8381x: Bits 0-3: media type, bit 17: full duplex");
MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)");
+MODULE_PARM_DESC(no_cable_magic,
+ "DP8381x: set no_cable_magic=1 to disable magic workaround for short cables "
+ "(may help with long cables:-)");
/*
Theory of Operation
@@ -1147,7 +1152,7 @@ static void init_phy_fixup(struct net_de
writew(1, ioaddr + PGSEL);
writew(PMDCSR_VAL, ioaddr + PMDCSR);
writew(TSTDAT_VAL, ioaddr + TSTDAT);
- np->dspcfg = (np->srr <= SRR_DP83815_C)?
+ np->dspcfg = (np->srr <= SRR_DP83815_C || no_cable_magic)?
DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG));
writew(np->dspcfg, ioaddr + DSPCFG);
writew(SDCFG_VAL, ioaddr + SDCFG);
@@ -1511,7 +1516,7 @@ static void do_cable_magic(struct net_de
if (dev->if_port != PORT_TP)
return;
- if (np->srr >= SRR_DP83816_A5)
+ if (np->srr >= SRR_DP83816_A5 || no_cable_magic)
return;
/*
@@ -1556,7 +1561,7 @@ static void undo_cable_magic(struct net_
if (dev->if_port != PORT_TP)
return;
- if (np->srr >= SRR_DP83816_A5)
+ if (np->srr >= SRR_DP83816_A5 || no_cable_magic)
return;
writew(1, ioaddr + PGSEL);
--
Olaf Kirch | --- o --- Nous sommes du soleil we love when we play
okir@...e.de | / | \ sol.dhoop.naytheet.ah kin.ir.samse.qurax
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists