| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070111004316.GE2624@osprey.hogchain.net>
Date: Wed, 10 Jan 2007 18:43:16 -0600
From: Jay Cliburn <jacliburn@...lsouth.net>
To: jeff@...zik.org
Cc: shemminger@...l.org, csnook@...hat.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, atl1-devel@...ts.sourceforge.net
Subject: [PATCH 4/4] atl1: Ancillary C files for Attansic L1 driver
From: Jay Cliburn <jacliburn@...lsouth.net>
From: Chris Snook <csnook@...hat.com>
This patch contains auxiliary C files for the Attansic L1 gigabit ethernet
adapter driver.
Signed-off-by: Jay Cliburn <jacliburn@...lsouth.net>
Signed-off-by: Chris Snook <csnook@...hat.com>
---
atl1_ethtool.c | 528 +++++++++++++++++++++++++++++++++++++
atl1_hw.c | 797 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
atl1_param.c | 223 +++++++++++++++
3 files changed, 1548 insertions(+)
diff --git a/drivers/net/atl1/atl1_ethtool.c b/drivers/net/atl1/atl1_ethtool.c
new file mode 100644
index 0000000..4d454b2
--- /dev/null
+++ b/drivers/net/atl1/atl1_ethtool.c
@@ -0,0 +1,528 @@
+/**
+ * atl1_ethtool.c - atl1 ethtool support
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 Chris Snook <csnook@...hat.com>
+ * Copyright(c) 2006 Jay Cliburn <jcliburn@...il.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ **/
+
+#include <linux/netdevice.h>
+#include <asm/uaccess.h>
+
+#include "atl1.h"
+
+
+extern char atl1_driver_name[];
+extern char atl1_driver_version[];
+
+struct atl1_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define ATL1_STAT(m) sizeof(((struct atl1_adapter *)0)->m), \
+ offsetof(struct atl1_adapter, m)
+
+static struct atl1_stats atl1_gstrings_stats[] = {
+ {"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
+ {"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
+ {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
+ {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
+ {"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
+ {"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
+ {"rx_dropped", ATL1_STAT(net_stats.rx_dropped)},
+ {"tx_dropped", ATL1_STAT(net_stats.tx_dropped)},
+ {"multicast", ATL1_STAT(soft_stats.multicast)},
+ {"collisions", ATL1_STAT(soft_stats.collisions)},
+ {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
+ {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
+ {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
+ {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
+ {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
+ {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
+ {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
+ {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
+ {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
+ {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
+ {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
+ {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
+ {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
+ {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
+ {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
+ {"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
+ {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
+ {"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
+ {"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
+ {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
+ {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
+};
+
+#define ATL1_STATS_LEN sizeof(atl1_gstrings_stats) / sizeof(struct atl1_stats)
+
+static void atl1_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p;
+
+ for (i = 0; i < ATL1_STATS_LEN; i++) {
+ p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
+ data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+
+}
+
+static int atl1_get_stats_count(struct net_device *netdev)
+{
+ return ATL1_STATS_LEN;
+}
+
+static int atl1_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ ecmd->advertising |=
+ (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full);
+ } else {
+ ecmd->advertising |= (ADVERTISED_1000baseT_Full);
+ }
+ }
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = 0;
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ if (netif_carrier_ok(adapter->netdev)) {
+ u16 link_speed, link_duplex;
+ atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
+ ecmd->speed = link_speed;
+ if (link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ ecmd->autoneg = AUTONEG_ENABLE;
+ } else {
+ ecmd->autoneg = AUTONEG_DISABLE;
+ }
+
+ return 0;
+}
+
+static int atl1_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+ u16 phy_data;
+ int ret_val = 0;
+ u16 old_media_type = hw->media_type;
+
+ if (netif_running(adapter->netdev)) {
+ printk(KERN_DEBUG "%s: ethtool shutting down link adapter\n",
+ atl1_driver_name);
+ atl1_down(adapter);
+ }
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
+ } else {
+ if (ecmd->speed == SPEED_1000) {
+ if (ecmd->duplex != DUPLEX_FULL) {
+ printk(KERN_WARNING
+ "%s: can't force to 1000M half duplex\n",
+ atl1_driver_name);
+ ret_val = -EINVAL;
+ goto exit_sset;
+ }
+ hw->media_type = MEDIA_TYPE_1000M_FULL;
+ } else if (ecmd->speed == SPEED_100) {
+ if (ecmd->duplex == DUPLEX_FULL) {
+ hw->media_type = MEDIA_TYPE_100M_FULL;
+ } else {
+ hw->media_type = MEDIA_TYPE_100M_HALF;
+ }
+ } else {
+ if (ecmd->duplex == DUPLEX_FULL) {
+ hw->media_type = MEDIA_TYPE_10M_FULL;
+ } else {
+ hw->media_type = MEDIA_TYPE_10M_HALF;
+ }
+ }
+ }
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ ecmd->advertising =
+ ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Autoneg | ADVERTISED_TP;
+ break;
+ case MEDIA_TYPE_1000M_FULL:
+ ecmd->advertising =
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Autoneg | ADVERTISED_TP;
+ break;
+ default:
+ ecmd->advertising = 0;
+ break;
+ }
+ if (atl1_phy_setup_autoneg_adv(hw)) {
+ ret_val = -EINVAL;
+ printk(KERN_WARNING
+ "%s: invalid ethtool speed/duplex setting\n",
+ atl1_driver_name);
+ goto exit_sset;
+ }
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ } else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
+ MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default: /* MEDIA_TYPE_10M_HALF: */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ }
+ }
+ atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+exit_sset:
+ if (ret_val) {
+ hw->media_type = old_media_type;
+ }
+ if (netif_running(adapter->netdev)) {
+ printk(KERN_DEBUG "%s: ethtool starting link adapter\n",
+ atl1_driver_name);
+ atl1_up(adapter);
+ } else if (!ret_val) {
+ printk(KERN_DEBUG "%s: ethtool resetting link adapter\n",
+ atl1_driver_name);
+ atl1_reset(adapter);
+ }
+ return ret_val;
+}
+
+static void atl1_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ strncpy(drvinfo->driver, atl1_driver_name, 32);
+ strncpy(drvinfo->version, atl1_driver_version, 32);
+ strncpy(drvinfo->fw_version, "N/A", 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->eedump_len = 48;
+}
+
+static void atl1_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+ if (adapter->wol & ATL1_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & ATL1_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & ATL1_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & ATL1_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ return;
+}
+
+static int atl1_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+ adapter->wol = 0;
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= ATL1_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= ATL1_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= ATL1_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= ATL1_WUFC_MAG;
+ return 0;
+}
+
+static void atl1_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
+ struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
+
+ ring->rx_max_pending = 2048;
+ ring->tx_max_pending = 1024;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int atl1_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ int err;
+ struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
+ struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
+ struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
+
+ struct atl1_tpd_ring tpd_old, tpd_new;
+ struct atl1_rfd_ring rfd_old, rfd_new;
+ struct atl1_rrd_ring rrd_old, rrd_new;
+
+ tpd_old = adapter->tpd_ring;
+ rfd_old = adapter->rfd_ring;
+ rrd_old = adapter->rrd_ring;
+
+ if (netif_running(adapter->netdev))
+ atl1_down(adapter);
+
+ rfdr->count = (u16) max(ring->rx_pending, (u32) 32);
+ rfdr->count = rfdr->count > 2048 ? 2048 : rfdr->count;
+ rfdr->count = (rfdr->count + 3) & ~3;
+ rrdr->count = rfdr->count;
+
+ tpdr->count = (u16) max(ring->tx_pending, (u32) 16);
+ tpdr->count = tpdr->count > 1024 ? 1024 : tpdr->count;
+ tpdr->count = (tpdr->count + 3) & ~3;
+
+ if (netif_running(adapter->netdev)) {
+ /* try to get new resources before deleting old */
+ if ((err = atl1_setup_ring_resources(adapter)))
+ goto err_setup_ring;
+
+ /**
+ * save the new, restore the old in order to free it,
+ * then restore the new back again
+ **/
+ rfd_new = adapter->rfd_ring;
+ rrd_new = adapter->rrd_ring;
+ tpd_new = adapter->tpd_ring;
+ adapter->rfd_ring = rfd_old;
+ adapter->rrd_ring = rrd_old;
+ adapter->tpd_ring = tpd_old;
+ atl1_free_ring_resources(adapter);
+ adapter->rfd_ring = rfd_new;
+ adapter->rrd_ring = rrd_new;
+ adapter->tpd_ring = tpd_new;
+
+ if ((err = atl1_up(adapter)))
+ return err;
+ }
+ return 0;
+
+ err_setup_ring:
+ adapter->rfd_ring = rfd_old;
+ adapter->rrd_ring = rrd_old;
+ adapter->tpd_ring = tpd_old;
+ atl1_up(adapter);
+ return err;
+}
+
+static void atl1_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *epause)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ epause->autoneg = AUTONEG_ENABLE;
+ } else {
+ epause->autoneg = AUTONEG_DISABLE;
+ }
+ epause->rx_pause = 1;
+ epause->tx_pause = 1;
+}
+
+static int atl1_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *epause)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ epause->autoneg = AUTONEG_ENABLE;
+ } else {
+ epause->autoneg = AUTONEG_DISABLE;
+ }
+
+ epause->rx_pause = 1;
+ epause->tx_pause = 1;
+
+ return 0;
+}
+
+static u32 atl1_get_rx_csum(struct net_device *netdev)
+{
+ return 1;
+}
+
+static u32 atl1_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int atl1_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int atl1_set_tso(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_TSO;
+ else
+ netdev->features &= ~NETIF_F_TSO;
+ return 0;
+}
+
+static void atl1_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ATL1_STATS_LEN; i++) {
+ memcpy(p, atl1_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static int atl1_nway_reset(struct net_device *netdev)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+
+ if (netif_running(netdev)) {
+ u16 phy_data;
+ atl1_down(adapter);
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ } else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data = MII_CR_FULL_DUPLEX |
+ MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data = MII_CR_FULL_DUPLEX |
+ MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default: /* MEDIA_TYPE_10M_HALF */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ }
+ }
+ atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+ atl1_up(adapter);
+ }
+ return 0;
+}
+
+static const struct ethtool_ops atl1_ethtool_ops = {
+ .get_settings = atl1_get_settings,
+ .set_settings = atl1_set_settings,
+ .get_drvinfo = atl1_get_drvinfo,
+ .get_wol = atl1_get_wol,
+ .set_wol = atl1_set_wol,
+ .get_ringparam = atl1_get_ringparam,
+ .set_ringparam = atl1_set_ringparam,
+ .get_pauseparam = atl1_get_pauseparam,
+ .set_pauseparam = atl1_set_pauseparam,
+ .get_rx_csum = atl1_get_rx_csum,
+ .get_tx_csum = atl1_get_tx_csum,
+ .set_tx_csum = atl1_set_tx_csum,
+ .get_link = ethtool_op_get_link,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_strings = atl1_get_strings,
+ .nway_reset = atl1_nway_reset,
+ .get_ethtool_stats = atl1_get_ethtool_stats,
+ .get_stats_count = atl1_get_stats_count,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = atl1_set_tso,
+};
+
+void atl1_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &atl1_ethtool_ops);
+}
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
new file mode 100644
index 0000000..25a9587
--- /dev/null
+++ b/drivers/net/atl1/atl1_hw.c
@@ -0,0 +1,797 @@
+/**
+ * atl1_hw.c - atl1 hardware operations
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 Chris Snook <csnook@...hat.com>
+ * Copyright(c) 2006 Jay Cliburn <jcliburn@...il.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ **/
+
+#include <asm/byteorder.h>
+#include <linux/mii.h>
+#include "atl1.h"
+
+
+extern char atl1_driver_name[];
+
+/**
+ * The little-endian AUTODIN II ethernet CRC calculations.
+ * A big-endian version is also available.
+ * This is slow but compact code. Do not use this routine
+ * for bulk data, use a table-based routine instead.
+ * This is common code and should be moved to net/core/crc.c.
+ * Chips may use the upper or lower CRC bits, and may reverse
+ * and/or invert them. Select the endian-ness that results
+ * in minimal calculations.
+ **/
+static u32 ether_crc_le(int length, unsigned char *data)
+{
+ u32 crc = ~0; /* Initial value. */
+ while (--length >= 0) {
+ unsigned char current_octet = *data++;
+ int bit;
+ for (bit = 8; --bit >= 0; current_octet >>= 1) {
+ if ((crc ^ current_octet) & 1) {
+ crc >>= 1;
+ crc ^= 0xedb88320;
+ } else
+ crc >>= 1;
+ }
+ }
+ return ~crc;
+}
+
+void atl1_read_pci_cfg(struct atl1_hw *hw, u32 reg, u16 * value)
+{
+ struct atl1_adapter *adapter = hw->back;
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void atl1_write_pci_cfg(struct atl1_hw *hw, u32 reg, u16 * value)
+{
+ struct atl1_adapter *adapter = hw->back;
+ pci_write_config_word(adapter->pdev, reg, *value);
+}
+
+/**
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ * hw - Struct containing variables accessed by shared code
+ * return : ATL1_SUCCESS or idle status (if error)
+ **/
+s32 atl1_reset_hw(struct atl1_hw * hw)
+{
+ u32 icr;
+ u16 pci_cfg_cmd_word;
+ int i;
+
+ /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
+ atl1_read_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
+ if ((pci_cfg_cmd_word &
+ (CMD_IO_SPACE | CMD_MEMORY_SPACE | CMD_BUS_MASTER))
+ != (CMD_IO_SPACE | CMD_MEMORY_SPACE | CMD_BUS_MASTER)) {
+ pci_cfg_cmd_word |=
+ (CMD_IO_SPACE | CMD_MEMORY_SPACE | CMD_BUS_MASTER);
+ atl1_write_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
+ }
+
+ /**
+ * Clear Interrupt mask to stop board from generating
+ * interrupts & Clear any pending interrupt events
+ **/
+ /**
+ * atl1_write32(hw, REG_IMR, 0);
+ * atl1_write32(hw, REG_ISR, 0xffffffff);
+ **/
+
+ /**
+ * Issue Soft Reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ **/
+ /*atl1_write32(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);*/
+ atl1_write32(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
+ wmb();
+
+ atl1_write16(hw, REG_GPHY_ENABLE, 1);
+
+ msec_delay(1); /* delay about 1ms */
+
+ /* Wait at least 10ms for All module to be Idle */
+ for (i = 0; i < 10; i++) {
+ icr = atl1_read32(hw, REG_IDLE_STATUS);
+ if (!icr)
+ break;
+ msec_delay(1); /* delay 1 ms */
+ cpu_relax(); /* FIXME: is this still the right way to do this? */
+ }
+
+ if (icr)
+ return icr;
+
+ return ATL1_SUCCESS;
+}
+
+static inline bool atl1_eth_address_valid(u8 * p_addr)
+{
+ /* Invalid PermanentAddress ? */
+ if (((p_addr[0] == 0) &&
+ (p_addr[1] == 0) &&
+ (p_addr[2] == 0) &&
+ (p_addr[3] == 0) && (p_addr[4] == 0) && (p_addr[5] == 0)
+ ) || (p_addr[0] & 1))
+ /* Multicast address or Broadcast Address */
+ return false;
+
+ return true;
+}
+
+/** function about EEPROM
+ *
+ * check_eeprom_exist
+ * return 0 if eeprom exist
+ **/
+static int atl1_check_eeprom_exist(struct atl1_hw *hw)
+{
+ u32 value;
+ value = atl1_read32(hw, REG_SPI_FLASH_CTRL);
+ if (value & SPI_FLASH_CTRL_EN_VPD) {
+ value &= ~SPI_FLASH_CTRL_EN_VPD;
+ atl1_write32(hw, REG_SPI_FLASH_CTRL, value);
+ }
+ value = atl1_read16(hw, REG_PCIE_CAP_LIST);
+ return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
+}
+
+static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 * p_value)
+{
+ int i;
+ u32 control;
+
+ if (offset & 3)
+ return false; /* address do not align */
+
+ atl1_write32(hw, REG_VPD_DATA, 0);
+ control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
+ atl1_write32(hw, REG_VPD_CAP, control);
+
+ for (i = 0; i < 10; i++) {
+ msec_delay(2);
+ control = atl1_read32(hw, REG_VPD_CAP);
+ if (control & VPD_CAP_VPD_FLAG)
+ break;
+ }
+ if (control & VPD_CAP_VPD_FLAG) {
+ *p_value = atl1_read32(hw, REG_VPD_DATA);
+ return true;
+ }
+ return false; /* timeout */
+}
+
+/**
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ **/
+s32 atl1_read_phy_reg(struct atl1_hw * hw, u16 reg_addr, u16 * phy_data)
+{
+ u32 val;
+ int i;
+
+ val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+ MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
+ MDIO_CLK_SEL_SHIFT;
+ atl1_write32(hw, REG_MDIO_CTRL, val);
+
+ wmb();
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ usec_delay(2);
+ val = atl1_read32(hw, REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY))) {
+ break;
+ }
+ wmb();
+ }
+ if (!(val & (MDIO_START | MDIO_BUSY))) {
+ *phy_data = (u16) val;
+ return ATL1_SUCCESS;
+ }
+ return ATL1_ERR_PHY;
+}
+
+#define CUSTOM_SPI_CS_SETUP 2
+#define CUSTOM_SPI_CLK_HI 2
+#define CUSTOM_SPI_CLK_LO 2
+#define CUSTOM_SPI_CS_HOLD 2
+#define CUSTOM_SPI_CS_HI 3
+
+static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 * buf)
+{
+ int i;
+ u32 value;
+
+ atl1_write32(hw, REG_SPI_DATA, 0);
+ atl1_write32(hw, REG_SPI_ADDR, addr);
+
+ value = SPI_FLASH_CTRL_WAIT_READY |
+ (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
+ SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
+ SPI_FLASH_CTRL_CLK_HI_MASK) <<
+ SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
+ SPI_FLASH_CTRL_CLK_LO_MASK) <<
+ SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
+ SPI_FLASH_CTRL_CS_HOLD_MASK) <<
+ SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
+ SPI_FLASH_CTRL_CS_HI_MASK) <<
+ SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
+ SPI_FLASH_CTRL_INS_SHIFT;
+
+ atl1_write32(hw, REG_SPI_FLASH_CTRL, value);
+
+ value |= SPI_FLASH_CTRL_START;
+
+ atl1_write32(hw, REG_SPI_FLASH_CTRL, value);
+
+ for (i = 0; i < 10; i++) {
+ msec_delay(1); /* 1ms */
+ value = atl1_read32(hw, REG_SPI_FLASH_CTRL);
+ if (!(value & SPI_FLASH_CTRL_START))
+ break;
+ }
+
+ if (value & SPI_FLASH_CTRL_START)
+ return false;
+
+ *buf = atl1_read32(hw, REG_SPI_DATA);
+
+ return true;
+}
+
+/**
+ * get_permanent_address
+ * return 0 if get valid mac address,
+ **/
+int atl1_get_permanent_address(struct atl1_hw *hw)
+{
+ u32 addr[2];
+ u32 i, control;
+ u16 reg;
+ u8 eth_addr[NODE_ADDRESS_SIZE];
+ bool key_valid;
+
+ if (atl1_eth_address_valid(hw->perm_mac_addr))
+ return 0;
+
+ /* init */
+ addr[0] = addr[1] = 0;
+
+ if (!atl1_check_eeprom_exist(hw)) { /* eeprom exist */
+ reg = 0;
+ key_valid = false;
+ /* Read out all EEPROM content */
+ i = 0;
+ while (1) {
+ if (atl1_read_eeprom(hw, i + 0x100, &control)) {
+ if (key_valid) {
+ if (reg == REG_MAC_STA_ADDR)
+ addr[0] = control;
+ else if (reg == (REG_MAC_STA_ADDR + 4)) {
+ addr[1] = control;
+ }
+ key_valid = false;
+ } else if ((control & 0xff) == 0x5A) {
+ key_valid = true;
+ reg = (u16) (control >> 16);
+ } else {
+ break; /* assume data end while encount an invalid KEYWORD */
+ }
+ } else {
+ break; /* read error */
+ }
+ i += 4;
+ }
+
+/**
+ * The following 2 lines are the Attansic originals. Saving for posterity.
+ * *(u32 *) & eth_addr[2] = LONGSWAP(addr[0]);
+ * *(u16 *) & eth_addr[0] = SHORTSWAP(*(u16 *) & addr[1]);
+ **/
+ *(u32 *) & eth_addr[2] = swab32(addr[0]);
+ *(u16 *) & eth_addr[0] = swab16(*(u16 *) & addr[1]);
+
+ if (atl1_eth_address_valid(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, NODE_ADDRESS_SIZE);
+ return 0;
+ }
+ return 1;
+ }
+
+ /* see if SPI FLAGS exist ? */
+ addr[0] = addr[1] = 0;
+ reg = 0;
+ key_valid = false;
+ i = 0;
+ while (1) {
+ if (atl1_spi_read(hw, i + 0x1f000, &control)) {
+ if (key_valid) {
+ if (reg == REG_MAC_STA_ADDR)
+ addr[0] = control;
+ else if (reg == (REG_MAC_STA_ADDR + 4)) {
+ addr[1] = control;
+ }
+ key_valid = false;
+ } else if ((control & 0xff) == 0x5A) {
+ key_valid = true;
+ reg = (u16) (control >> 16);
+ } else {
+ break; /* data end */
+ }
+ } else {
+ break; /* read error */
+ }
+ i += 4;
+ }
+
+/**
+ * The following 2 lines are the Attansic originals. Saving for posterity.
+ * *(u32 *) & eth_addr[2] = LONGSWAP(addr[0]);
+ * *(u16 *) & eth_addr[0] = SHORTSWAP(*(u16 *) & addr[1]);
+ **/
+ *(u32 *) & eth_addr[2] = swab32(addr[0]);
+ *(u16 *) & eth_addr[0] = swab16(*(u16 *) & addr[1]);
+ if (atl1_eth_address_valid(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, NODE_ADDRESS_SIZE);
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * Reads the adapter's MAC address from the EEPROM
+ * hw - Struct containing variables accessed by shared code
+ **/
+s32 atl1_read_mac_addr(struct atl1_hw * hw)
+{
+ u16 i;
+
+ if (atl1_get_permanent_address(hw)) {
+ hw->perm_mac_addr[0] = 0x00;
+ hw->perm_mac_addr[1] = 0x13;
+ hw->perm_mac_addr[2] = 0x74;
+ hw->perm_mac_addr[3] = 0x00;
+ hw->perm_mac_addr[4] = 0x5c;
+ hw->perm_mac_addr[5] = 0x38;
+ }
+ for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return ATL1_SUCCESS;
+}
+
+/**
+ * Hashes an address to determine its location in the multicast table
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *
+ * atl1_hash_mc_addr
+ * purpose
+ * set hash value for a multicast address
+ * hash calcu processing :
+ * 1. calcu 32bit CRC for multicast address
+ * 2. reverse crc with MSB to LSB
+ **/
+u32 atl1_hash_mc_addr(struct atl1_hw * hw, u8 * mc_addr)
+{
+ u32 crc32, value = 0;
+ int i;
+
+ crc32 = ether_crc_le(6, mc_addr);
+ crc32 = ~crc32;
+ for (i = 0; i < 32; i++)
+ value |= (((crc32 >> i) & 1) << (31 - i));
+
+ return value;
+}
+
+/**
+ * Sets the bit in the multicast table corresponding to the hash value.
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ **/
+void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta;
+
+ /**
+ * The HASH Table is a register array of 2 32-bit registers.
+ * It is treated like an array of 64 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ **/
+ hash_reg = (hash_value >> 31) & 0x1;
+ hash_bit = (hash_value >> 26) & 0x1F;
+
+ mta = atl1_read32_array(hw, REG_RX_HASH_TABLE, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ atl1_write32_array(hw, REG_RX_HASH_TABLE, hash_reg, mta);
+}
+
+/**
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ **/
+s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ int i;
+ u32 val;
+
+ val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+ (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+ MDIO_SUP_PREAMBLE |
+ MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+ atl1_write32(hw, REG_MDIO_CTRL, val);
+
+ wmb();
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ usec_delay(2);
+ val = atl1_read32(hw, REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ wmb();
+ }
+
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ return ATL1_SUCCESS;
+
+ return ATL1_ERR_PHY;
+}
+
+/**
+ * Make L001's PHY out of Power Saving State (bug)
+ * hw - Struct containing variables accessed by shared code
+ * when power on, L001's PHY always on Power saving State
+ * (Gigabit Link forbidden)
+ **/
+static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
+{
+ s32 ret;
+ if ((ret = atl1_write_phy_reg(hw, 29, 0x0029)))
+ return ret;
+ return atl1_write_phy_reg(hw, 30, 0);
+}
+
+/**
+ *TODO: do something or get rid of this
+ **/
+s32 atl1_phy_enter_power_saving(struct atl1_hw * hw)
+{
+/* s32 ret_val;
+ * u16 phy_data;
+ */
+
+/*
+ ret_val = atl1_write_phy_reg(hw, ...);
+ ret_val = atl1_write_phy_reg(hw, ...);
+ ....
+*/
+ return ATL1_SUCCESS;
+}
+
+/**
+ * Resets the PHY and make all config validate
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
+ **/
+static s32 atl1_phy_reset(struct atl1_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
+ hw->media_type == MEDIA_TYPE_1000M_FULL) {
+ phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
+ } else {
+ switch (hw->media_type) {
+ case MEDIA_TYPE_100M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
+ MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ phy_data =
+ MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ default: /* MEDIA_TYPE_10M_HALF: */
+ phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
+ break;
+ }
+ }
+
+ ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
+ if (ret_val) {
+ u32 val;
+ int i;
+ /**************************************
+ * pcie serdes link may be down !
+ **************************************/
+ printk(KERN_DEBUG "%s: autoneg caused pcie phy link down\n",
+ atl1_driver_name);
+
+ for (i = 0; i < 25; i++) {
+ msec_delay(1);
+ val = atl1_read32(hw, REG_MDIO_CTRL);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+
+ if (0 != (val & (MDIO_START | MDIO_BUSY))) {
+ printk(KERN_WARNING
+ "%s: pcie link down at least for 25ms\n",
+ atl1_driver_name);
+ return ret_val;
+ }
+ }
+ return ATL1_SUCCESS;
+}
+
+/**
+ * Configures PHY autoneg and flow control advertisement settings
+ * hw - Struct containing variables accessed by shared code
+ **/
+s32 atl1_phy_setup_autoneg_adv(struct atl1_hw * hw)
+{
+ s32 ret_val;
+ s16 mii_autoneg_adv_reg;
+ s16 mii_1000t_ctrl_reg;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
+
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK;
+
+ /**
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ **/
+ mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK;
+
+ /**
+ * Need to parse media_type and set up
+ * the appropriate PHY registers.
+ **/
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
+ MII_AR_10T_FD_CAPS |
+ MII_AR_100TX_HD_CAPS |
+ MII_AR_100TX_FD_CAPS);
+ mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_1000M_FULL:
+ mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_100M_FULL:
+ mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
+ break;
+
+ case MEDIA_TYPE_100M_HALF:
+ mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
+ break;
+
+ case MEDIA_TYPE_10M_FULL:
+ mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
+ break;
+
+ default:
+ mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
+ break;
+ }
+
+ /* flow control fixed to enable all */
+ mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
+
+ hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
+ hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
+
+ ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = atl1_write_phy_reg(hw, MII_AT001_CR, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ return ATL1_SUCCESS;
+}
+
+/**
+ * Configures link settings.
+ * hw - Struct containing variables accessed by shared code
+ * Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ **/
+static s32 atl1_setup_link(struct atl1_hw *hw)
+{
+ s32 ret_val;
+
+ /**
+ * Options:
+ * PHY will advertise value(s) parsed from
+ * autoneg_advertised and fc
+ * no matter what autoneg is , We will not wait link result.
+ **/
+ ret_val = atl1_phy_setup_autoneg_adv(hw);
+ if (ret_val) {
+ printk(KERN_DEBUG "%s: error setting up autonegotiation\n",
+ atl1_driver_name);
+ return ret_val;
+ }
+ /* SW.Reset , En-Auto-Neg if needed */
+ ret_val = atl1_phy_reset(hw);
+ if (ret_val) {
+ printk(KERN_DEBUG "%s: error resetting the phy\n", atl1_driver_name);
+ return ret_val;
+ }
+ hw->phy_configured = true;
+ return ret_val;
+}
+
+struct atl1_spi_flash_dev flash_table[] = {
+/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */
+ {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62},
+ {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60},
+ {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7},
+};
+
+static void atl1_init_flash_opcode(struct atl1_hw *hw)
+{
+ if (hw->flash_vendor >= sizeof(flash_table) / sizeof(flash_table[0]))
+ hw->flash_vendor = 0; /* ATMEL */
+
+ /* Init OP table */
+ atl1_write8(hw, REG_SPI_FLASH_OP_PROGRAM,
+ flash_table[hw->flash_vendor].cmd_program);
+ atl1_write8(hw, REG_SPI_FLASH_OP_SC_ERASE,
+ flash_table[hw->flash_vendor].cmd_sector_erase);
+ atl1_write8(hw, REG_SPI_FLASH_OP_CHIP_ERASE,
+ flash_table[hw->flash_vendor].cmd_chip_erase);
+ atl1_write8(hw, REG_SPI_FLASH_OP_RDID,
+ flash_table[hw->flash_vendor].cmd_rdid);
+ atl1_write8(hw, REG_SPI_FLASH_OP_WREN,
+ flash_table[hw->flash_vendor].cmd_wren);
+ atl1_write8(hw, REG_SPI_FLASH_OP_RDSR,
+ flash_table[hw->flash_vendor].cmd_rdsr);
+ atl1_write8(hw, REG_SPI_FLASH_OP_WRSR,
+ flash_table[hw->flash_vendor].cmd_wrsr);
+ atl1_write8(hw, REG_SPI_FLASH_OP_READ,
+ flash_table[hw->flash_vendor].cmd_read);
+}
+
+/**
+ * Performs basic configuration of the adapter.
+ * hw - Struct containing variables accessed by shared code
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes multicast table,
+ * and Calls routines to setup link
+ * Leaves the transmit and receive units disabled and uninitialized.
+ **/
+s32 atl1_init_hw(struct atl1_hw *hw)
+{
+ u32 ret_val = 0;
+
+ /* Zero out the Multicast HASH table */
+ atl1_write32(hw, REG_RX_HASH_TABLE, 0);
+ /* clear the old settings from the multicast hash table */
+ atl1_write32_array(hw, REG_RX_HASH_TABLE, 1, 0);
+
+ atl1_init_flash_opcode(hw);
+
+ if (!hw->phy_configured) {
+ /* enable GPHY LinkChange Interrrupt */
+ ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
+ if (ret_val)
+ return ret_val;
+ /* make PHY out of power-saving state */
+ ret_val = atl1_phy_leave_power_saving(hw);
+ if (ret_val)
+ return ret_val;
+ /* Call a subroutine to configure the link */
+ ret_val = atl1_setup_link(hw);
+ }
+ return ret_val;
+}
+
+/**
+ * Detects the current speed and duplex settings of the hardware.
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ **/
+s32 atl1_get_speed_and_duplex(struct atl1_hw * hw, u16 * speed, u16 * duplex)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ /* ; --- Read PHY Specific Status Register (17) */
+ ret_val = atl1_read_phy_reg(hw, MII_AT001_PSSR, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED))
+ return ATL1_ERR_PHY_RES;
+
+ switch (phy_data & MII_AT001_PSSR_SPEED) {
+ case MII_AT001_PSSR_1000MBS:
+ *speed = SPEED_1000;
+ break;
+ case MII_AT001_PSSR_100MBS:
+ *speed = SPEED_100;
+ break;
+ case MII_AT001_PSSR_10MBS:
+ *speed = SPEED_10;
+ break;
+ default:
+ printk(KERN_DEBUG "%s: error getting speed\n",
+ atl1_driver_name);
+ return ATL1_ERR_PHY_SPEED;
+ break;
+ }
+ if (phy_data & MII_AT001_PSSR_DPLX)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ return ATL1_SUCCESS;
+}
+
+void atl1_set_mac_addr(struct atl1_hw *hw)
+{
+ u32 value;
+ /**
+ * 00-0B-6A-F6-00-DC
+ * 0: 6AF600DC 1: 000B
+ * low dword
+ **/
+ value = (((u32) hw->mac_addr[2]) << 24) |
+ (((u32) hw->mac_addr[3]) << 16) |
+ (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
+ atl1_write32_array(hw, REG_MAC_STA_ADDR, 0, value);
+ /* hight dword */
+ value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
+ atl1_write32_array(hw, REG_MAC_STA_ADDR, 1, value);
+}
+
diff --git a/drivers/net/atl1/atl1_param.c b/drivers/net/atl1/atl1_param.c
new file mode 100644
index 0000000..ed3098e
--- /dev/null
+++ b/drivers/net/atl1/atl1_param.c
@@ -0,0 +1,223 @@
+/**
+ * atl1_param.c - atl1 parameter parsing
+ *
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 Chris Snook <csnook@...hat.com>
+ * Copyright(c) 2006 Jay Cliburn <jcliburn@...il.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ **/
+
+#include <linux/moduleparam.h>
+#include "atl1.h"
+
+extern char atl1_driver_name[];
+
+/**
+ * This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ **/
+#define ATL1_MAX_NIC 4
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
+
+/**
+ * Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 100 (200us)
+ **/
+static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_int_mod_timer = 0;
+module_param_array_named(int_mod_timer, int_mod_timer, int, &num_int_mod_timer, 0);
+MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
+
+/**
+ * flash_vendor
+ *
+ * Valid Range: 0-2
+ *
+ * 0 - Atmel
+ * 1 - SST
+ * 2 - ST
+ *
+ * Default Value: 0
+ **/
+static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_flash_vendor = 0;
+module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
+MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
+
+int enable_msi;
+module_param(enable_msi, int, 0444);
+MODULE_PARM_DESC(enable_msi, "Enable PCI MSI");
+
+#define DEFAULT_INT_MOD_CNT 100 /* 200us */
+#define MAX_INT_MOD_CNT 65000
+#define MIN_INT_MOD_CNT 50
+
+#define FLASH_VENDOR_DEFAULT 0
+#define FLASH_VENDOR_MIN 0
+#define FLASH_VENDOR_MAX 2
+
+struct atl1_option {
+ enum { enable_option, range_option, list_option } type;
+ char *name;
+ char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ struct atl1_opt_list {
+ int i;
+ char *str;
+ } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit atl1_validate_option(int *value, struct atl1_option *opt)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ printk(KERN_INFO "%s: %s Enabled\n", atl1_driver_name,
+ opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ printk(KERN_INFO "%s: %s Disabled\n", atl1_driver_name,
+ opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ printk(KERN_INFO "%s: %s set to %i\n",
+ atl1_driver_name, opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option:{
+ int i;
+ struct atl1_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ printk(KERN_INFO "%s: %s\n",
+ atl1_driver_name, ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ printk(KERN_INFO "%s: invalid %s specified (%i) %s\n",
+ atl1_driver_name, opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/**
+ * atl1_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+void __devinit atl1_check_options(struct atl1_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (bd >= ATL1_MAX_NIC) {
+ printk(KERN_NOTICE "%s: warning: no configuration for board #%i\n",
+ atl1_driver_name, bd);
+ printk(KERN_NOTICE "%s: using defaults for all values\n",
+ atl1_driver_name);
+ }
+ { /* Interrupt Moderate Timer */
+ struct atl1_option opt = {
+ .type = range_option,
+ .name = "Interrupt Moderator Timer",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_INT_MOD_CNT),
+ .def = DEFAULT_INT_MOD_CNT,
+ .arg = {.r =
+ {.min = MIN_INT_MOD_CNT,.max = MAX_INT_MOD_CNT}}
+ };
+ int val;
+ if (num_int_mod_timer > bd) {
+ val = int_mod_timer[bd];
+ atl1_validate_option(&val, &opt);
+ adapter->imt = (u16) val;
+ } else {
+ adapter->imt = (u16) (opt.def);
+ }
+ }
+
+ { /* Flash Vendor */
+ struct atl1_option opt = {
+ .type = range_option,
+ .name = "SPI Flash Vendor",
+ .err = "using default of "
+ __MODULE_STRING(FLASH_VENDOR_DEFAULT),
+ .def = DEFAULT_INT_MOD_CNT,
+ .arg = {.r =
+ {.min = FLASH_VENDOR_MIN,.max =
+ FLASH_VENDOR_MAX}}
+ };
+ int val;
+ if (num_flash_vendor > bd) {
+ val = flash_vendor[bd];
+ atl1_validate_option(&val, &opt);
+ adapter->hw.flash_vendor = (u8) val;
+ } else {
+ adapter->hw.flash_vendor = (u8) (opt.def);
+ }
+ }
+
+ { /* PCI MSI usage */
+
+#ifdef CONFIG_PCI_MSI
+ adapter->enable_msi = enable_msi;
+#else
+ adapter->enable_msi = 0;
+#endif
+ }
+}
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists