| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070209000952.5155.96947.stgit@gitlost.site>
Date: Thu, 08 Feb 2007 16:09:52 -0800
From: "Kok, Auke" <auke-jan.h.kok@...el.com>
To: "David Miller" <davem@...emloft.net>,
"Garzik, Jeff" <jgarzik@...ox.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: "Kok, Auke" <auke-jan.h.kok@...el.com>,
"Peter Waskiewicz Jr" <peter.p.waskiewicz.jr@...el.com>,
"Brandeburg, Jesse" <jesse.brandeburg@...el.com>,
"Kok, Auke" <auke@...-projects.org>,
"Ronciak, John" <john.ronciak@...el.com>
Subject: [PATCH 2/2] e1000: Implement the new kernel API for multiqueue TX support.
From: Peter Waskiewicz Jr. <peter.p.waskiewicz.jr@...el.com>
Several newer e1000 chipsets support multiple RX and TX queues. Most
commonly, 82571's and ESB2LAN support 2 rx and 2 rx queues.
Signed-off-by: Peter Waskiewicz Jr. <peter.p.waskiewicz.jr@...el.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@...el.com>
---
drivers/net/Kconfig | 13 ++
drivers/net/e1000/e1000.h | 23 +++
drivers/net/e1000/e1000_ethtool.c | 43 ++++++
drivers/net/e1000/e1000_main.c | 269 +++++++++++++++++++++++++++++++------
4 files changed, 304 insertions(+), 44 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ad92b6a..2d758ab 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1988,6 +1988,19 @@ config E1000_DISABLE_PACKET_SPLIT
If in doubt, say N.
+config E1000_MQ
+ bool "Enable Tx/Rx Multiqueue Support (EXPERIMENTAL)"
+ depends on E1000 && NET_MULTI_QUEUE_DEVICE && EXPERIMENTAL
+ help
+ Say Y here if you want to enable multiqueue support for supported
+ e1000 devices. This will enable both transmit and receive queues
+ on devices that support them.
+
+ In order to fully utilize the Tx queue support, use the SCH_PRIO
+ queueing discipline.
+
+ If in doubt, say N.
+
source "drivers/net/ixp2000/Kconfig"
config MYRI_SBUS
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 689f158..cfcdc9d 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -108,6 +108,10 @@ struct e1000_adapter;
#define E1000_MIN_RXD 80
#define E1000_MAX_82544_RXD 4096
+#ifdef CONFIG_E1000_MQ
+#define E1000_MAX_TX_QUEUES 4
+#endif
+
/* this is the size past which hardware will drop packets when setting LPE=0 */
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
@@ -168,6 +172,12 @@ struct e1000_buffer {
uint16_t next_to_watch;
};
+#ifdef CONFIG_E1000_MQ
+struct e1000_queue_stats {
+ uint64_t packets;
+ uint64_t bytes;
+};
+#endif
struct e1000_ps_page { struct page *ps_page[PS_PAGE_BUFFERS]; };
struct e1000_ps_page_dma { uint64_t ps_page_dma[PS_PAGE_BUFFERS]; };
@@ -188,9 +198,16 @@ struct e1000_tx_ring {
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
+#ifdef CONFIG_E1000_MQ
+ /* for tx ring cleanup - needed for multiqueue */
+ spinlock_t tx_queue_lock;
+#endif
spinlock_t tx_lock;
uint16_t tdh;
uint16_t tdt;
+#ifdef CONFIG_E1000_MQ
+ struct e1000_queue_stats tx_stats;
+#endif
boolean_t last_tx_tso;
};
@@ -218,6 +235,9 @@ struct e1000_rx_ring {
uint16_t rdh;
uint16_t rdt;
+#ifdef CONFIG_E1000_MQ
+ struct e1000_queue_stats rx_stats;
+#endif
};
#define E1000_DESC_UNUSED(R) \
@@ -271,6 +291,9 @@ struct e1000_adapter {
/* TX */
struct e1000_tx_ring *tx_ring; /* One per active queue */
+#ifdef CONFIG_E1000_MQ
+ struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */
+#endif
unsigned int restart_queue;
unsigned long tx_queue_len;
uint32_t txd_cmd;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 44ebc72..c8c1500 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -105,7 +105,14 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
{ "dropped_smbus", E1000_STAT(stats.mgpdc) },
};
+#ifdef CONFIG_E1000_MQ
+#define E1000_QUEUE_STATS_LEN \
+ (((struct e1000_adapter *)netdev->priv)->num_tx_queues + \
+ ((struct e1000_adapter *)netdev->priv)->num_rx_queues) \
+ * (sizeof(struct e1000_queue_stats) / sizeof(uint64_t))
+#else
#define E1000_QUEUE_STATS_LEN 0
+#endif
#define E1000_GLOBAL_STATS_LEN \
sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats)
#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
@@ -1909,6 +1916,11 @@ e1000_get_ethtool_stats(struct net_device *netdev,
struct ethtool_stats *stats, uint64_t *data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+#ifdef CONFIG_E1000_MQ
+ uint64_t *queue_stat;
+ int stat_count = sizeof(struct e1000_queue_stats) / sizeof(uint64_t);
+ int j, k;
+#endif
int i;
e1000_update_stats(adapter);
@@ -1917,12 +1929,29 @@ e1000_get_ethtool_stats(struct net_device *netdev,
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
}
+#ifdef CONFIG_E1000_MQ
+ for (j = 0; j < adapter->num_tx_queues; j++) {
+ queue_stat = (uint64_t *)&adapter->tx_ring[j].tx_stats;
+ for (k = 0; k < stat_count; k++)
+ data[i + k] = queue_stat[k];
+ i += k;
+ }
+ for (j = 0; j < adapter->num_rx_queues; j++) {
+ queue_stat = (uint64_t *)&adapter->rx_ring[j].rx_stats;
+ for (k = 0; k < stat_count; k++)
+ data[i + k] = queue_stat[k];
+ i += k;
+ }
+#endif
/* BUG_ON(i != E1000_STATS_LEN); */
}
static void
e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
{
+#ifdef CONFIG_E1000_MQ
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+#endif
uint8_t *p = data;
int i;
@@ -1937,6 +1966,20 @@ e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
ETH_GSTRING_LEN);
p += ETH_GSTRING_LEN;
}
+#ifdef CONFIG_E1000_MQ
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ sprintf(p, "tx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ sprintf(p, "rx_queue_%u_packets", i);
+ p+= ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+#endif
/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
break;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 619c892..a53f065 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -28,6 +28,10 @@
#include "e1000.h"
#include <net/ip6_checksum.h>
+#ifdef CONFIG_E1000_MQ
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#endif
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
@@ -137,6 +141,9 @@ static void e1000_exit_module(void);
static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static void __devexit e1000_remove(struct pci_dev *pdev);
static int e1000_alloc_queues(struct e1000_adapter *adapter);
+#ifdef CONFIG_E1000_MQ
+static void e1000_setup_queue_mapping(struct e1000_adapter *adapter);
+#endif
static int e1000_sw_init(struct e1000_adapter *adapter);
static int e1000_open(struct net_device *netdev);
static int e1000_close(struct net_device *netdev);
@@ -153,7 +160,13 @@ static void e1000_set_multi(struct net_device *netdev);
static void e1000_update_phy_info(unsigned long data);
static void e1000_watchdog(unsigned long data);
static void e1000_82547_tx_fifo_stall(unsigned long data);
+static int e1000_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring);
static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+#ifdef CONFIG_E1000_MQ
+static int e1000_subqueue_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev, int queue);
+#endif
static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
@@ -547,6 +560,10 @@ e1000_up(struct e1000_adapter *adapter)
E1000_DESC_UNUSED(ring));
}
+#ifdef CONFIG_E1000_MQ
+ e1000_setup_queue_mapping(adapter);
+#endif
+
adapter->tx_queue_len = netdev->tx_queue_len;
#ifdef CONFIG_E1000_NAPI
@@ -900,7 +917,12 @@ e1000_probe(struct pci_dev *pdev,
pci_set_master(pdev);
err = -ENOMEM;
+#ifdef CONFIG_E1000_MQ
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter) +
+ (sizeof(struct net_device_subqueue) * E1000_MAX_TX_QUEUES));
+#else
netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+#endif
if (!netdev)
goto err_alloc_etherdev;
@@ -934,6 +956,9 @@ e1000_probe(struct pci_dev *pdev,
netdev->open = &e1000_open;
netdev->stop = &e1000_close;
netdev->hard_start_xmit = &e1000_xmit_frame;
+#ifdef CONFIG_E1000_MQ
+ netdev->hard_start_subqueue_xmit = &e1000_subqueue_xmit_frame;
+#endif
netdev->get_stats = &e1000_get_stats;
netdev->set_multicast_list = &e1000_set_multi;
netdev->set_mac_address = &e1000_set_mac;
@@ -1317,8 +1342,44 @@ e1000_sw_init(struct e1000_adapter *adapter)
hw->master_slave = E1000_MASTER_SLAVE;
}
+#ifdef CONFIG_E1000_MQ
+ /* Number of supported queues.
+ * TODO: It's assumed num_rx_queues >= num_tx_queues, since multi-rx
+ * queues are much more interesting. Is it worth coding for the
+ * possibility (however improbable) of num_tx_queues > num_rx_queues?
+ */
+ switch (hw->mac_type) {
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ adapter->num_tx_queues = 2;
+ adapter->num_rx_queues = 2;
+ break;
+
+ default:
+ /* All hardware before 82571 only have 1 queue each for Rx/Tx.
+ * However, the 82571 family does not have MSI-X, so multi-
+ * queue isn't enabled.
+ * It'd be wise not to mess with this default case. :) */
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+ netdev->egress_subqueue_count = 0;
+ break;
+ }
+ adapter->num_rx_queues = min(adapter->num_rx_queues, num_online_cpus());
+ adapter->num_tx_queues = min(adapter->num_tx_queues, num_online_cpus());
+
+ if ((adapter->num_tx_queues > 1) || (adapter->num_rx_queues > 1)) {
+ netdev->egress_subqueue = (struct net_device_subqueue *)((void *)adapter + sizeof(struct e1000_adapter));
+ netdev->egress_subqueue_count = adapter->num_tx_queues;
+ DPRINTK(DRV, INFO, "Multiqueue Enabled: RX queues = %u, "
+ "TX queues = %u\n", adapter->num_rx_queues,
+ adapter->num_tx_queues);
+ }
+#else
adapter->num_tx_queues = 1;
adapter->num_rx_queues = 1;
+#endif
if (e1000_alloc_queues(adapter)) {
DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
@@ -1334,13 +1395,16 @@ e1000_sw_init(struct e1000_adapter *adapter)
set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
}
spin_lock_init(&adapter->tx_queue_lock);
+#ifdef CONFIG_E1000_MQ
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ spin_lock_init(&adapter->tx_ring[i].tx_queue_lock);
+#endif
#endif
atomic_set(&adapter->irq_sem, 1);
spin_lock_init(&adapter->stats_lock);
set_bit(__E1000_DOWN, &adapter->flags);
-
return 0;
}
@@ -1382,9 +1446,28 @@ e1000_alloc_queues(struct e1000_adapter *adapter)
}
memset(adapter->polling_netdev, 0, size);
#endif
+#ifdef CONFIG_E1000_MQ
+ adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *);
+#endif
return E1000_SUCCESS;
}
+#ifdef CONFIG_E1000_MQ
+static void
+e1000_setup_queue_mapping(struct e1000_adapter *adapter)
+{
+ int i, cpu;
+
+ lock_cpu_hotplug();
+ i = 0;
+ for_each_online_cpu(cpu) {
+ *per_cpu_ptr(adapter->cpu_tx_ring, cpu) =
+ &adapter->tx_ring[i % adapter->num_tx_queues];
+ i++;
+ }
+ unlock_cpu_hotplug();
+}
+#endif
/**
* e1000_open - Called when a network interface is made active
@@ -1636,23 +1719,20 @@ e1000_configure_tx(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
uint32_t tdlen, tctl, tipg, tarc;
uint32_t ipgr1, ipgr2;
+ int i;
/* Setup the HW Tx Head and Tail descriptor pointers */
-
- switch (adapter->num_tx_queues) {
- case 1:
- default:
- tdba = adapter->tx_ring[0].dma;
- tdlen = adapter->tx_ring[0].count *
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ tdba = adapter->tx_ring[i].dma;
+ tdlen = adapter->tx_ring[i].count *
sizeof(struct e1000_tx_desc);
- E1000_WRITE_REG(hw, TDLEN, tdlen);
- E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
- E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, TDT, 0);
- E1000_WRITE_REG(hw, TDH, 0);
- adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
- adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
- break;
+ E1000_WRITE_REG(hw, TDLEN + (i << 8), tdlen);
+ E1000_WRITE_REG(hw, TDBAH + (i << 8), (tdba >> 32));
+ E1000_WRITE_REG(hw, TDBAL + (i << 8), (tdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, TDT + (i << 8), 0);
+ E1000_WRITE_REG(hw, TDH + (i << 8), 0);
+ adapter->tx_ring[i].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH + (i << 8) : E1000_82542_TDH);
+ adapter->tx_ring[i].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT + (i << 8) : E1000_82542_TDT);
}
/* Set the default values for the Tx Inter Packet Gap timer */
@@ -1999,6 +2079,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
uint64_t rdba;
struct e1000_hw *hw = &adapter->hw;
uint32_t rdlen, rctl, rxcsum, ctrl_ext;
+ int i;
if (adapter->rx_ps_pages) {
/* this is a 32 byte descriptor */
@@ -2042,20 +2123,67 @@ e1000_configure_rx(struct e1000_adapter *adapter)
/* Setup the HW Rx Head and Tail Descriptor Pointers and
* the Base and Length of the Rx Descriptor Ring */
- switch (adapter->num_rx_queues) {
- case 1:
- default:
- rdba = adapter->rx_ring[0].dma;
- E1000_WRITE_REG(hw, RDLEN, rdlen);
- E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
- E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
- E1000_WRITE_REG(hw, RDT, 0);
- E1000_WRITE_REG(hw, RDH, 0);
- adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
- adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
- break;
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ rdba = adapter->rx_ring[i].dma;
+ E1000_WRITE_REG(hw, RDLEN + (i << 8), rdlen);
+ E1000_WRITE_REG(hw, RDBAH + (i << 8), (rdba >> 32));
+ E1000_WRITE_REG(hw, RDBAL + (i << 8), (rdba & 0x00000000ffffffffULL));
+ E1000_WRITE_REG(hw, RDT + (i << 8), 0);
+ E1000_WRITE_REG(hw, RDH + (i << 8), 0);
+ adapter->rx_ring[i].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH + (i << 8) : E1000_82542_RDH);
+ adapter->rx_ring[i].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT + (i << 8) : E1000_82542_RDT);
}
+#ifdef CONFIG_E1000_MQ
+ if (adapter->num_rx_queues > 1) {
+ u32 random[10];
+ u32 reta, mrqc;
+ int i;
+
+ get_random_bytes(&random[0], 40);
+
+ switch (adapter->num_rx_queues) {
+ default:
+ reta = 0x00800080;
+ mrqc = E1000_MRQC_ENABLE_RSS_2Q;
+ break;
+ }
+
+ /* Fill out redirection table */
+ for (i = 0; i < 32; i++)
+ E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
+ /* Fill out hash function seeds */
+ for (i = 0; i < 10; i++)
+ E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
+
+ mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP);
+
+ E1000_WRITE_REG(hw, MRQC, mrqc);
+
+ /* Multiqueue and packet checksumming are mutually exclusive. */
+ rxcsum = E1000_READ_REG(hw, RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+ } else if (hw->mac_type >= e1000_82543) {
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ rxcsum = E1000_READ_REG(hw, RXCSUM);
+ if (adapter->rx_csum == TRUE) {
+ rxcsum |= E1000_RXCSUM_TUOFL;
+
+ /* Enable 82571 IPv4 payload checksum for UDP fragments
+ * Must be used in conjunction with packet-split. */
+ if ((hw->mac_type >= e1000_82571) &&
+ (adapter->rx_ps_pages)) {
+ rxcsum |= E1000_RXCSUM_IPPCSE;
+ }
+ } else {
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ }
+ E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+ }
+#else
/* Enable 82543 Receive Checksum Offload for TCP and UDP */
if (hw->mac_type >= e1000_82543) {
rxcsum = E1000_READ_REG(hw, RXCSUM);
@@ -2074,6 +2202,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
}
E1000_WRITE_REG(hw, RXCSUM, rxcsum);
}
+#endif
/* enable early receives on 82573, only takes effect if using > 2048
* byte total frame size. for example only for jumbo frames */
@@ -2555,6 +2684,9 @@ e1000_watchdog(unsigned long data)
struct e1000_tx_ring *txdr = adapter->tx_ring;
uint32_t link, tctl;
int32_t ret_val;
+#ifdef CONFIG_E1000_MQ
+ int i;
+#endif
ret_val = e1000_check_for_link(&adapter->hw);
if ((ret_val == E1000_ERR_PHY) &&
@@ -2652,6 +2784,12 @@ e1000_watchdog(unsigned long data)
netif_carrier_on(netdev);
netif_wake_queue(netdev);
+#ifdef CONFIG_E1000_MQ
+ if (netif_is_multiqueue(netdev))
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ netif_wake_subqueue(netdev, i);
+#endif
+
mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
adapter->smartspeed = 0;
} else {
@@ -3249,10 +3387,10 @@ static int e1000_maybe_stop_tx(struct net_device *netdev,
#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
static int
-e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+e1000_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_tx_ring *tx_ring;
unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
unsigned int tx_flags = 0;
@@ -3265,12 +3403,6 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int f;
len -= skb->data_len;
- /* This goes back to the question of how to logically map a tx queue
- * to a flow. Right now, performance is impacted slightly negatively
- * if using multiple tx queues. If the stack breaks away from a
- * single qdisc implementation, we can look at this again. */
- tx_ring = adapter->tx_ring;
-
if (unlikely(skb->len <= 0)) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
@@ -3425,6 +3557,31 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
return NETDEV_TX_OK;
}
+static int
+e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ return (e1000_xmit_frame_ring(skb, netdev, tx_ring));
+}
+
+#ifdef CONFIG_E1000_MQ
+static int
+e1000_subqueue_xmit_frame(struct sk_buff *skb, struct net_device *netdev,
+ int queue)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = &adapter->tx_ring[queue];
+
+ return (e1000_xmit_frame_ring(skb, netdev, tx_ring));
+}
+#endif
+
/**
* e1000_tx_timeout - Respond to a Tx Hang
* @netdev: network interface device structure
@@ -3924,6 +4081,7 @@ e1000_clean(struct net_device *poll_dev, int *budget)
struct e1000_adapter *adapter;
int work_to_do = min(*budget, poll_dev->quota);
int tx_cleaned = 0, work_done = 0;
+ int i;
/* Must NOT use netdev_priv macro here. */
adapter = poll_dev->priv;
@@ -3933,18 +4091,27 @@ e1000_clean(struct net_device *poll_dev, int *budget)
goto quit_polling;
/* e1000_clean is called per-cpu. This lock protects
- * tx_ring[0] from being cleaned by multiple cpus
+ * tx_ring[i] from being cleaned by multiple cpus
* simultaneously. A failure obtaining the lock means
- * tx_ring[0] is currently being cleaned anyway. */
- if (spin_trylock(&adapter->tx_queue_lock)) {
- tx_cleaned = e1000_clean_tx_irq(adapter,
- &adapter->tx_ring[0]);
- spin_unlock(&adapter->tx_queue_lock);
+ * tx_ring[i] is currently being cleaned anyway. */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+#ifdef CONFIG_E1000_MQ
+ if (spin_trylock(&adapter->tx_ring[i].tx_queue_lock)) {
+ tx_cleaned = e1000_clean_tx_irq(adapter,
+ &adapter->tx_ring[i]);
+ spin_unlock(&adapter->tx_ring[i].tx_queue_lock);
+ }
+#else
+ if (spin_trylock(&adapter->tx_queue_lock)) {
+ tx_cleaned = e1000_clean_tx_irq(adapter,
+ &adapter->tx_ring[i]);
+ spin_unlock(&adapter->tx_queue_lock);
+ }
+#endif
+ adapter->clean_rx(adapter, &adapter->rx_ring[i],
+ &work_done, work_to_do);
}
- adapter->clean_rx(adapter, &adapter->rx_ring[0],
- &work_done, work_to_do);
-
*budget -= work_done;
poll_dev->quota -= work_done;
@@ -3992,6 +4159,9 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
+#ifdef CONFIG_E1000_MQ
+ tx_ring->tx_stats.bytes += buffer_info->length;
+#endif
if (cleaned) {
struct sk_buff *skb = buffer_info->skb;
unsigned int segs, bytecount;
@@ -4008,6 +4178,9 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
if (unlikely(++i == tx_ring->count)) i = 0;
}
+#ifdef CONFIG_E1000_MQ
+ tx_ring->tx_stats.packets++;
+#endif
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
#ifdef CONFIG_E1000_NAPI
@@ -4269,6 +4442,10 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
}
#endif /* CONFIG_E1000_NAPI */
netdev->last_rx = jiffies;
+#ifdef CONFIG_E1000_MQ
+ rx_ring->rx_stats.packets++;
+ rx_ring->rx_stats.bytes += length;
+#endif
next_desc:
rx_desc->status = 0;
@@ -4375,6 +4552,10 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
/* Good Receive */
skb_put(skb, length);
+#ifdef CONFIG_E1000_MQ
+ rx_ring->rx_stats.packets++;
+ rx_ring->rx_stats.bytes += skb->len;
+#endif
{
/* this looks ugly, but it seems compiler issues make it
---
Auke Kok <auke-jan.h.kok@...el.com>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists