| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070223140300.1c93a375@freekitty>
Date: Fri, 23 Feb 2007 14:03:00 -0800
From: Stephen Hemminger <shemminger@...ux-foundation.org>
To: Jeff Garzik <jgarzik@...ox.com>
Cc: netdev@...r.kernel.org
Subject: [PATCH 1/2] skge: fix transmitter flow control
It looks like the skge driver inherited another bug from the sk98lin code.
If I send from 1000mbit port to a machine on 100mbit port, the switch should
be doing hardware flow control, but no pause frames show up in the statistics.
This is the analog of the recent sky2 fixes. The device needs to listen
for multicast pause frames and then not discard them.
Signed-off-by: Stephen Hemminger <shemminger@...ux-foundation.org>
---
drivers/net/skge.c | 43 ++++++++++++++++++++++++++++++++-----------
drivers/net/skge.h | 3 +--
2 files changed, 33 insertions(+), 13 deletions(-)
--- sky2-dev.orig/drivers/net/skge.c 2007-02-23 13:17:25.000000000 -0800
+++ sky2-dev/drivers/net/skge.c 2007-02-23 13:53:05.000000000 -0800
@@ -2767,6 +2767,17 @@
return err;
}
+static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
+
+static void genesis_add_filter(u8 filter[8], const u8 *addr)
+{
+ u32 crc, bit;
+
+ crc = ether_crc_le(ETH_ALEN, addr);
+ bit = ~crc & 0x3f;
+ filter[bit/8] |= 1 << (bit%8);
+}
+
static void genesis_set_multicast(struct net_device *dev)
{
struct skge_port *skge = netdev_priv(dev);
@@ -2788,24 +2799,33 @@
memset(filter, 0xff, sizeof(filter));
else {
memset(filter, 0, sizeof(filter));
- for (i = 0; list && i < count; i++, list = list->next) {
- u32 crc, bit;
- crc = ether_crc_le(ETH_ALEN, list->dmi_addr);
- bit = ~crc & 0x3f;
- filter[bit/8] |= 1 << (bit%8);
- }
+
+ if (skge->flow_status == FLOW_STAT_REM_SEND
+ || skge->flow_status == FLOW_STAT_SYMMETRIC)
+ genesis_add_filter(filter, pause_mc_addr);
+
+ for (i = 0; list && i < count; i++, list = list->next)
+ genesis_add_filter(filter, list->dmi_addr);
}
xm_write32(hw, port, XM_MODE, mode);
xm_outhash(hw, port, XM_HSM, filter);
}
+static void yukon_add_filter(u8 filter[8], const u8 *addr)
+{
+ u32 bit = ether_crc(ETH_ALEN, addr) & 0x3f;
+ filter[bit/8] |= 1 << (bit%8);
+}
+
static void yukon_set_multicast(struct net_device *dev)
{
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
int port = skge->port;
struct dev_mc_list *list = dev->mc_list;
+ int rx_pause = (skge->flow_status == FLOW_STAT_REM_SEND
+ || skge->flow_status == FLOW_STAT_SYMMETRIC);
u16 reg;
u8 filter[8];
@@ -2818,16 +2838,17 @@
reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
else if (dev->flags & IFF_ALLMULTI) /* all multicast */
memset(filter, 0xff, sizeof(filter));
- else if (dev->mc_count == 0) /* no multicast */
+ else if (dev->mc_count == 0 && !rx_pause)/* no multicast */
reg &= ~GM_RXCR_MCF_ENA;
else {
int i;
reg |= GM_RXCR_MCF_ENA;
- for (i = 0; list && i < dev->mc_count; i++, list = list->next) {
- u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f;
- filter[bit/8] |= 1 << (bit%8);
- }
+ if (rx_pause)
+ yukon_add_filter(filter, pause_mc_addr);
+
+ for (i = 0; list && i < dev->mc_count; i++, list = list->next)
+ yukon_add_filter(filter, list->dmi_addr);
}
--- sky2-dev.orig/drivers/net/skge.h 2007-02-23 13:30:36.000000000 -0800
+++ sky2-dev/drivers/net/skge.h 2007-02-23 13:31:11.000000000 -0800
@@ -1849,8 +1849,7 @@
GMR_FS_JABBER,
/* Rx GMAC FIFO Flush Mask (default) */
RX_FF_FL_DEF_MSK = GMR_FS_CRC_ERR | GMR_FS_RX_FF_OV |GMR_FS_MII_ERR |
- GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE |
- GMR_FS_JABBER,
+ GMR_FS_BAD_FC | GMR_FS_UN_SIZE | GMR_FS_JABBER,
};
/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists