lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 26 Feb 2007 11:06:36 -0800 From: Ron Mercer <ron.mercer@...gic.com> To: jeff@...zik.org Cc: ron.mercer@...gic.com, romieu@...zoreil.com, benjamin.li@...gic.com, netdev@...r.kernel.org Subject: [PATCH 06/13] qla3xxx: Remove API to change MTU. This network device driver shares the same hardware as the qla4xxx iSCSI driver. Changing the MTU via the device interface will cause qla4xxx to crash as there is no way to make notification. Users wishing to change the MTU must do so using an iSCSI utility such as Qlogic SanSurfer. This forces the user to unload/reload this network device driver after the MTU value has been changed in flash. Signed-off-by: Ron Mercer <ron.mercer@...gic.com> --- drivers/net/qla3xxx.c | 24 ++---------------------- 1 files changed, 2 insertions(+), 22 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 59cebd6..b86cef0 100755 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3372,27 +3372,6 @@ static struct net_device_stats *ql3xxx_get_stats(struct net_device *dev) return &qdev->stats; } -static int ql3xxx_change_mtu(struct net_device *ndev, int new_mtu) -{ - struct ql3_adapter *qdev = netdev_priv(ndev); - printk(KERN_ERR PFX "%s: new mtu size = %d.\n", ndev->name, new_mtu); - if (new_mtu != NORMAL_MTU_SIZE && new_mtu != JUMBO_MTU_SIZE) { - printk(KERN_ERR PFX - "%s: mtu size of %d is not valid. Use exactly %d or " - "%d.\n", ndev->name, new_mtu, NORMAL_MTU_SIZE, - JUMBO_MTU_SIZE); - return -EINVAL; - } - - if (!netif_running(ndev)) { - ndev->mtu = new_mtu; - return 0; - } - - ndev->mtu = new_mtu; - return ql_cycle_adapter(qdev,QL_DO_RESET); -} - static void ql3xxx_set_multicast_list(struct net_device *ndev) { /* @@ -3684,7 +3663,6 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev, ndev->hard_start_xmit = ql3xxx_send; ndev->stop = ql3xxx_close; ndev->get_stats = ql3xxx_get_stats; - ndev->change_mtu = ql3xxx_change_mtu; ndev->set_multicast_list = ql3xxx_set_multicast_list; SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops); ndev->set_mac_address = ql3xxx_set_mac_address; @@ -3709,9 +3687,11 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev, /* Validate and set parameters */ if (qdev->mac_index) { + ndev->mtu = qdev->nvram_data.macCfg_port1.etherMtu_mac ; memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn2.macAddress, ETH_ALEN); } else { + ndev->mtu = qdev->nvram_data.macCfg_port0.etherMtu_mac ; memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn0.macAddress, ETH_ALEN); } -- 1.5.0.rc4.16.g9e258 - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists