[    0.000000] Linux version 2.6.21-rc1-kevent (s0mbre@uganda) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #50 SMP PREEMPT Wed Feb 28 12:31:20 EST 2007
[    0.000000] Command line: root=/dev/mapper/uganda-root ro idle=poll
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP 000F7150, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 3FFF30C0, 48E5 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 3FFF0000, 0040
[    0.000000] ACPI: APIC 3FFF79C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fff0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   262128
[    0.000000] On node 0 totalpages: 262031
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 866 pages reserved
[    0.000000]   DMA zone: 3077 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3527 pages used for memmap
[    0.000000]   DMA32 zone: 254505 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[    0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[    0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 36480 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 257582
[    0.000000] Kernel command line: root=/dev/mapper/uganda-root ro idle=poll
[    0.000000] using polling idle threads.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   14.727825] time.c: Detected 2210.086 MHz processor.
[   14.732799] Console: colour VGA+ 80x25
[   14.736484] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   14.737520] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   14.737705] Checking aperture...
[   14.737756] CPU 0: aperture @ e8000000 size 128 MB
[   14.747216] Memory: 1017920k/1048512k available (1824k kernel code, 30204k reserved, 829k data, 280k init)
[   14.825760] Calibrating delay using timer specific routine.. 4422.90 BogoMIPS (lpj=8845806)
[   14.826180] Mount-cache hash table entries: 256
[   14.826595] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   14.826653] CPU: L2 Cache: 512K (64 bytes/line)
[   14.826706] CPU 0/0 -> Node 0
[   14.826770] SMP alternatives: switching to UP code
[   14.826948] Freeing SMP alternatives: 24k freed
[   14.827009] ACPI: Core revision 20070126
[   15.233589] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   16.133751] Using local APIC timer interrupts.
[   16.179018] result 12557308
[   16.179068] Detected 12.557 MHz APIC timer.
[   16.180933] Brought up 1 CPUs
[   16.181012] testing NMI watchdog ... OK.
[   16.221513] NET: Registered protocol family 16
[   16.221781] ACPI: bus type pci registered
[   16.221839] PCI: Using configuration type 1
[   16.231013] ACPI: Interpreter enabled
[   16.231068] ACPI: (supports S0 S1 S4 S5)
[   16.231298] ACPI: Using IOAPIC for interrupt routing
[   16.249674] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   16.249734] PCI: Probing PCI hardware (bus 00)
[   16.250331] Boot video device is 0000:01:00.0
[   16.250518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   16.250825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   16.251494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[   16.321783] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   16.322391] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.323069] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.323742] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.324423] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   16.325037] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.325640] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.326239] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.326912] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.327590] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   16.328190] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.328876] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   16.329483] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.330082] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.330755] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.331429] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   16.332116] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.332730] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   16.333309] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[   16.333603] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[   16.333933] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[   16.334262] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[   16.334586] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[   16.334978] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[   16.335483] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
[   16.335988] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[   16.336523] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
[   16.337076] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[   16.337583] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[   16.338119] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[   16.338624] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[   16.339129] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[   16.339666] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
[   16.340202] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   16.340748] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[   16.341269] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[   16.341734] ACPI: Power Resource [ISAV] (on)
[   16.341803] Linux Plug and Play Support v0.97 (c) Adam Belay
[   16.341881] pnp: PnP ACPI init
[   16.341953] pnp: ACPI device : hid PNP0C02
[   16.342116] pnp: ACPI device : hid PNP0C01
[   16.342507] pnp: ACPI device : hid PNP0A03
[   16.344779] pnp: ACPI device : hid PNP0C02
[   16.344901] pnp: ACPI device : hid PNP0200
[   16.345011] pnp: ACPI device : hid PNP0B00
[   16.345125] pnp: ACPI device : hid PNP0800
[   16.345241] pnp: ACPI device : hid PNP0C04
[   16.345515] pnp: ACPI device : hid PNP0700
[   16.345981] pnp: ACPI device : hid PNP0501
[   16.346964] pnp: ACPI device : hid PNP0400
[   16.347704] pnp: ACPI device : hid PNP0F13
[   16.347945] pnp: ACPI device : hid PNP0303
[   16.348122] pnp: PnP ACPI: found 13 devices
[   16.348345] usbcore: registered new interface driver usbfs
[   16.348496] usbcore: registered new interface driver hub
[   16.348644] usbcore: registered new device driver usb
[   16.348764] PCI: Using ACPI for IRQ routing
[   16.348819] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   16.348899] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[   16.349111] agpgart: Detected AGP bridge 0
[   16.349166] agpgart: Setting up Nforce3 AGP.
[   16.352775] agpgart: AGP aperture is 128M @ 0xe8000000
[   16.352872] pnp: the driver 'system' has been registered
[   16.352956] pnp: match found with the PnP device '00:00' and the driver 'system'
[   16.352962] pnp: 00:00: ioport range 0x4000-0x407f has been reserved
[   16.353020] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[   16.353078] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[   16.353134] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
[   16.353196] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
[   16.353254] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
[   16.353314] pnp: match found with the PnP device '00:01' and the driver 'system'
[   16.353318] pnp: 00:01: iomem range 0xd5000-0xd7fff has been reserved
[   16.353376] pnp: 00:01: iomem range 0xf0000-0xf7fff could not be reserved
[   16.353434] pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
[   16.353492] pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
[   16.353556] pnp: match found with the PnP device '00:03' and the driver 'system'
[   16.354392] PCI: Bridge: 0000:00:0b.0
[   16.354443]   IO window: disabled.
[   16.354495]   MEM window: f4000000-f5ffffff
[   16.354548]   PREFETCH window: f0000000-f3ffffff
[   16.354603] PCI: Bridge: 0000:00:0e.0
[   16.354654]   IO window: 9000-9fff
[   16.354705]   MEM window: f6000000-f7ffffff
[   16.354758]   PREFETCH window: 50000000-500fffff
[   16.354817] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   16.354973] NET: Registered protocol family 2
[   16.392796] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   16.393320] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[   16.395359] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   16.396005] TCP: Hash tables configured (established 131072 bind 65536)
[   16.396064] TCP reno registered
[   16.405349] checking if image is initramfs... it is
[   17.388326] Freeing initrd memory: 10736k freed
[   17.395912] KEVENT: Added callbacks for type 8.
[   17.396154] KEVENT subsystem has been successfully registered.
[   17.396210] KEVENT: Added callbacks for type 2.
[   17.396303] KEVENT: Added callbacks for type 3.
[   17.396355] Kevent poll()/select() subsystem has been initialized.
[   17.396410] KEVENT: Added callbacks for type 0.
[   17.396462] KEVENT: Added callbacks for type 6.
[   17.396514] KEVENT: Added callbacks for type 7.
[   17.396567] KEVENT: Added callbacks for type 9.
[   17.396812] KEVENT: Added callbacks for type 5.
[   17.397384] io scheduler noop registered
[   17.397464] io scheduler anticipatory registered
[   17.402262] io scheduler deadline registered
[   17.402385] io scheduler cfq registered (default)
[   17.466236] Real Time Clock Driver v1.12ac
[   17.466504] Linux agpgart interface v0.102 (c) Dave Jones
[   17.466559] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[   17.466818] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.467394] pnp: the driver 'serial' has been registered
[   17.467523] pnp: match found with the PnP device '00:09' and the driver 'serial'
[   17.467679] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.469763] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   17.470201] pnp: the driver 'i8042 kbd' has been registered
[   17.470297] pnp: match found with the PnP device '00:0c' and the driver 'i8042 kbd'
[   17.470303] pnp: the driver 'i8042 aux' has been registered
[   17.470389] pnp: match found with the PnP device '00:0b' and the driver 'i8042 aux'
[   17.470396] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   17.473025] serio: i8042 KBD port at 0x60,0x64 irq 1
[   17.473193] serio: i8042 AUX port at 0x60,0x64 irq 12
[   17.473528] mice: PS/2 mouse device common for all mice
[   17.473804] TCP cubic registered
[   17.473875] NET: Registered protocol family 1
[   17.473930] NET: Registered protocol family 17
[   17.474294] Freeing unused kernel memory: 280k freed
[   17.476018] Time: tsc clocksource has been installed.
[   17.515535] input: AT Translated Set 2 keyboard as /class/input/input0
[   17.858119] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   17.858616] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   17.858677] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, high) -> IRQ 23
[   17.858826] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   17.858829] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   17.859006] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[   17.859100] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf8002000
[   17.920999] usb usb1: configuration #1 chosen from 1 choice
[   17.921121] hub 1-0:1.0: USB hub found
[   17.921184] hub 1-0:1.0: 4 ports detected
[   17.935079] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   17.935140] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   18.028773] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[   18.028835] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 22
[   18.028985] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   18.028988] ohci_hcd 0000:00:02.1: OHCI Host Controller
[   18.029386] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[   18.029483] ohci_hcd 0000:00:02.1: irq 22, io mem 0xf8003000
[   18.089683] usb usb2: configuration #1 chosen from 1 choice
[   18.089801] hub 2-0:1.0: USB hub found
[   18.089862] hub 2-0:1.0: 4 ports detected
[   18.198211] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[   18.198276] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 21
[   18.198424] PCI: Setting latency timer of device 0000:00:02.2 to 64
[   18.198427] ehci_hcd 0000:00:02.2: EHCI Host Controller
[   18.198563] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[   18.198698] ehci_hcd 0000:00:02.2: debug port 1
[   18.198751] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[   18.198763] ehci_hcd 0000:00:02.2: irq 21, io mem 0xf8004000
[   18.198820] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   18.199088] usb usb3: configuration #1 chosen from 1 choice
[   18.199206] hub 3-0:1.0: USB hub found
[   18.199267] hub 3-0:1.0: 8 ports detected
[   18.304779] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[   18.304940] NFORCE3-250: chipset revision 162
[   18.304992] NFORCE3-250: not 100% native mode: will probe irqs later
[   18.305050] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[   18.305124] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[   18.305186]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[   18.305321]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[   18.305456] Probing IDE interface ide0...
[   18.323179] SCSI subsystem initialized
[   18.329510] libata version 2.10 loaded.
[   18.595212] hda: ST340016A, ATA DISK drive
[   18.879007] hdb: Maxtor 6E040L0, ATA DISK drive
[   18.939367] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   18.940186] Probing IDE interface ide1...
[   19.510898] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[   19.511222] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   19.511281] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
[   19.511905] eth0: RTL8169s/8110s at 0xffffc20000016000, 00:11:09:61:eb:0e, IRQ 16
[   19.515217] sata_nv 0000:00:09.0: version 3.3
[   19.515724] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   19.515781] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 20 (level, high) -> IRQ 20
[   19.515932] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   19.516072] ata1: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c800 irq 20
[   19.516234] ata2: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c808 irq 20
[   19.516323] scsi0 : sata_nv
[   19.830257] ata1: SATA link down (SStatus 0 SControl 300)
[   19.830325] scsi1 : sata_nv
[   20.361888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   20.392535] ata2.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
[   20.392591] ata2.00: 234441648 sectors, multi 1: LBA48 
[   20.424589] ata2.00: configured for UDMA/133
[   20.424793] scsi 1:0:0:0: Direct-Access     ATA      ST3120026AS      3.05 PQ: 0 ANSI: 5
[   20.426132] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[   20.426188] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) -> IRQ 23
[   20.426347] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   20.426457] ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 23
[   20.426625] ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 23
[   20.426709] scsi2 : sata_nv
[   20.741602] ata3: SATA link down (SStatus 0 SControl 300)
[   20.741661] scsi3 : sata_nv
[   21.057374] ata4: SATA link down (SStatus 0 SControl 300)
[   21.068785] hda: max request size: 128KiB
[   21.078573] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[   21.078767] hda: cache flushes not supported
[   21.078909]  hda:<5>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[   21.079769] sda: Write Protect is off
[   21.079820] sda: Mode Sense: 00 3a 00 00
[   21.079844] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.079992] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[   21.080059] sda: Write Protect is off
[   21.080110] sda: Mode Sense: 00 3a 00 00
[   21.080133] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.080240]  sda: sda1 sda2 < sda5 >
[   21.096375] sd 1:0:0:0: Attached scsi disk sda
[   21.097068]  hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
[   21.167060] hdb: max request size: 128KiB
[   21.170201] hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[   21.170485] hdb: cache flushes supported
[   21.170611]  hdb: hdb1 < hdb5 hdb6 >
[   21.852968] Probing IDE interface ide1...
[   22.522187] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[   23.148782] kjournald starting.  Commit interval 5 seconds
[   23.148850] EXT3-fs: mounted filesystem with ordered data mode.
[   25.145115] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[   25.145244] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[   25.209108] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   25.209168] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 22
[   25.209324] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   25.513961] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
[   25.534205] intel8x0_measure_ac97_clock: measured 58518 usecs
[   25.534264] intel8x0: clocking to 46945
[   25.920831] EXT3 FS on dm-0, internal journal
[   26.796050] loop: loaded (max 8 devices)
[   34.998273] kjournald starting.  Commit interval 5 seconds
[   34.998593] EXT3 FS on sda1, internal journal
[   34.998677] EXT3-fs: mounted filesystem with ordered data mode.
[   35.025366] kjournald starting.  Commit interval 5 seconds
[   35.025761] EXT3 FS on dm-5, internal journal
[   35.025844] EXT3-fs: mounted filesystem with ordered data mode.
[   35.046464] kjournald starting.  Commit interval 5 seconds
[   35.046859] EXT3 FS on dm-4, internal journal
[   35.046943] EXT3-fs: mounted filesystem with ordered data mode.
[   35.064748] kjournald starting.  Commit interval 5 seconds
[   35.065096] EXT3 FS on dm-1, internal journal
[   35.065180] EXT3-fs: mounted filesystem with ordered data mode.
[   35.086883] kjournald starting.  Commit interval 5 seconds
[   35.087202] EXT3 FS on dm-2, internal journal
[   35.087285] EXT3-fs: mounted filesystem with ordered data mode.
[   35.113017] Adding 3084280k swap on /dev/mapper/uganda-swap_1.  Priority:-1 extents:1 across:3084280k
[   36.065137] r8169: eth0: link up
[   36.957758] input: Power Button (FF) as /class/input/input2
[   36.967303] ACPI: Power Button (FF) [PWRF]
[   36.972128] input: Power Button (CM) as /class/input/input3
[   36.981319] ACPI: Power Button (CM) [PWRB]
[   80.633043] bhtest: module license 'unspecified' taints kernel.
[   80.633967] bhtest_init: skb: ffff8100375c9bf8.
[   80.634023] kfree debug: obj: ffff8100375c9bf8, likely you want to use something with 'skbuff_head_cache' in name instead of kfree().
[   80.634105] bhtest_init: data: ffff81003b0bca60.