netdev - ignore; Re: "skge 0000:01:0a.0: unsupported phy type 0x0"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Mon, 5 Mar 2007 14:00:27 -0800 (PST)
From:	Chris Stromsoe <cbs@....ucla.edu>
To:	netdev@...r.kernel.org
Subject: ignore; Re: "skge 0000:01:0a.0: unsupported phy type 0x0"

Ignore this.  I rebooted into the wrong kernel and was testing with 2.6.16 
instead of 2.6.20.  It works fine with 2.6.20.

-Chris

On Mon, 5 Mar 2007, Chris Stromsoe wrote:

> I have a bunch of dual-port SK 98xx cards that work with sk98lin but not 
> with skge.  After loading skge, I get
>
> ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> 
> IRQ 10
> skge 0000:01:0a.0: unsupported phy type 0x0
> ACPI: PCI interrupt for device 0000:01:0a.0 disabled
> skge: probe of 0000:01:0a.0 failed with error -95
>
>
> lspci -vv output for the card:
>
> 0000:01:0a.0 Ethernet controller: Syskonnect (Schneider & Koch) SK-98xx 
> Gigabit Ethernet Server Adapter (rev 12)
>        Subsystem: Syskonnect (Schneider & Koch) SK-9844 Gigabit Ethernet 
> Server Adapter (SK-NET GE-SX dual link)
>        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR-
>        Interrupt: pin A routed to IRQ 10
>        Region 0: Memory at ff8fc000 (32-bit, non-prefetchable) [size=16K]
>        Region 1: I/O ports at d800 [size=256]
>        Expansion ROM at ff400000 [disabled] [size=128K]
>        Capabilities: [48] Power Management version 1
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>        Capabilities: [50] Vital Product Data
>
>
>
>
> -Chris
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html