The workaround Yukon EC-U wasn't comparing with correct
version and wasn't doing correct setup. Without it, 88e8056
throws all sorts of errors.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>

--- linux-2.6.20.y.orig/drivers/net/sky2.c	2007-04-07 15:56:37.000000000 -0700
+++ linux-2.6.20.y/drivers/net/sky2.c	2007-04-07 15:58:12.000000000 -0700
@@ -524,9 +524,9 @@
 		ledover &= ~PHY_M_LED_MO_RX;
 	}
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+	    hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
 		/* apply fixes in PHY AFE */
-		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
 
 		/* increase differential signal amplitude in 10BASE-T */
@@ -538,7 +538,7 @@
 		gm_phy_write(hw, port, 0x17, 0x2002);
 
 		/* set page register to 0 */
-		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 	} else {
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 

--

-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html