| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070410165713.7b3d6158.kim.phillips@freescale.com>
Date: Tue, 10 Apr 2007 16:57:13 -0500
From: Kim Phillips <kim.phillips@...escale.com>
To: netdev@...r.kernel.org
Cc: Jeff Garzik <jgarzik@...ox.com>
Subject: [PATCH] add the ICPlus IP175C PHY driver
From: Michael Barkowski <michael.barkowski@...escale.com>
The ICPlus IP175C sports a 100Mbit/s 5-port switch in addition
to a dedicated 100Mbit/s WAN port.
Signed-off-by: Michael Barkowski <michael.barkowski@...escale.com>
Signed-off-by: Kim Phillips <kim.phillips@...escale.com>
---
please consider for 2.6.22
drivers/net/phy/Kconfig | 6 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/icplus.c | 121 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 128 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/phy/icplus.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index f994f12..91cf33e 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -62,6 +62,12 @@ config BROADCOM_PHY
---help---
Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
+config ICPLUS_PHY
+ tristate "Drivers for ICPlus PHYs"
+ depends on PHYLIB
+ ---help---
+ Currently supports the IP175C PHY.
+
config FIXED_PHY
tristate "Drivers for PHY emulation on fixed speed/link"
depends on PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index bcd1efb..8885650 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -11,4 +11,5 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
new file mode 100644
index 0000000..4e2912c
--- /dev/null
+++ b/drivers/net/phy/icplus.c
@@ -0,0 +1,121 @@
+/*
+ * Driver for ICPlus PHYs
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
+MODULE_AUTHOR("Michael Barkowski");
+MODULE_LICENSE("GPL");
+
+static int ip175c_config_init(struct phy_device *phydev)
+{
+ int err, i;
+ static int full_reset_performed = 0;
+
+ if (full_reset_performed == 0) {
+
+ /* master reset */
+ err = phydev->bus->write(phydev->bus, 30, 0, 0x175c);
+ if (err < 0)
+ return err;
+
+ /* data sheet specifies reset period is 2 msec */
+ udelay(3000);
+
+ /* enable IP175C mode */
+ err = phydev->bus->write(phydev->bus, 29, 31, 0x175c);
+ if (err < 0)
+ return err;
+
+ for (i=0; i<5; i++) {
+ err = phydev->bus->write(phydev->bus, i, MII_BMCR, BMCR_RESET);
+ }
+ udelay(3000);
+
+ full_reset_performed = 1;
+ }
+
+ if (phydev->addr != 4) {
+ phydev->state = PHY_RUNNING;
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_FULL;
+ phydev->link = 1;
+ netif_carrier_on(phydev->attached_dev);
+ }
+
+ printk("PHY %d initialized\n",phydev->addr);
+ return 0;
+}
+
+static int ip175c_read_status(struct phy_device *phydev)
+{
+ if (phydev->addr == 4) { /* if WAN port */
+ genphy_read_status(phydev);
+ }
+
+ return 0;
+}
+
+
+static int ip175c_config_aneg(struct phy_device *phydev)
+{
+ if (phydev->addr == 4) { /* if WAN port */
+ genphy_config_aneg(phydev);
+ }
+
+ return 0;
+}
+
+
+static struct phy_driver ip175c_driver = {
+ .phy_id = 0x02430d80,
+ .name = "ICPlus IP175C",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config_init = &ip175c_config_init,
+ .config_aneg = &ip175c_config_aneg,
+ .read_status = &ip175c_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init ip175c_init(void)
+{
+ return phy_driver_register(&ip175c_driver);
+}
+
+static void __exit ip175c_exit(void)
+{
+ phy_driver_unregister(&ip175c_driver);
+}
+
+module_init(ip175c_init);
+module_exit(ip175c_exit);
+
--
1.5.0.1
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists