| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070427170617.GA3302@havoc.gtf.org>
Date: Fri, 27 Apr 2007 13:06:17 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] e1000 fixes
Please pull from 'e1000-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git e1000-fixes
to receive the following updates:
drivers/net/e1000/e1000_main.c | 104 ++++++++++++++++++++++------------------
1 files changed, 58 insertions(+), 46 deletions(-)
Auke Kok (1):
e1000: FIX: be ready for incoming irq at pci_request_irq
Bruce Allan (1):
e1000: FIX: firmware handover bits
Mark Huth (1):
e1000: FIX: Stop raw interrupts disabled nag from RT
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b28a915..eb3ff1f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -409,25 +409,21 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
{
uint32_t ctrl_ext;
uint32_t swsm;
- uint32_t extcnf;
/* Let firmware taken over control of h/w */
switch (adapter->hw.mac_type) {
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
- break;
case e1000_82573:
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
swsm & ~E1000_SWSM_DRV_LOAD);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
case e1000_ich8lan:
- extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
- extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
break;
default:
break;
@@ -450,26 +446,21 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
{
uint32_t ctrl_ext;
uint32_t swsm;
- uint32_t extcnf;
/* Let firmware know the driver has taken over */
switch (adapter->hw.mac_type) {
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
- E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
- break;
case e1000_82573:
swsm = E1000_READ_REG(&adapter->hw, SWSM);
E1000_WRITE_REG(&adapter->hw, SWSM,
swsm | E1000_SWSM_DRV_LOAD);
break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
case e1000_ich8lan:
- extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
- E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
- extcnf | E1000_EXTCNF_CTRL_SWFLAG);
+ ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+ E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
break;
default:
break;
@@ -522,14 +513,15 @@ e1000_release_manageability(struct e1000_adapter *adapter)
}
}
-int
-e1000_up(struct e1000_adapter *adapter)
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
int i;
- /* hardware has been reset, we need to reload some things */
-
e1000_set_multi(netdev);
e1000_restore_vlan(adapter);
@@ -548,14 +540,20 @@ e1000_up(struct e1000_adapter *adapter)
}
adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->flags);
#ifdef CONFIG_E1000_NAPI
- netif_poll_enable(netdev);
+ netif_poll_enable(adapter->netdev);
#endif
e1000_irq_enable(adapter);
- clear_bit(__E1000_DOWN, &adapter->flags);
-
/* fire a link change interrupt to start the watchdog */
E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
return 0;
@@ -640,15 +638,15 @@ e1000_down(struct e1000_adapter *adapter)
* reschedule our watchdog timer */
set_bit(__E1000_DOWN, &adapter->flags);
+#ifdef CONFIG_E1000_NAPI
+ netif_poll_disable(netdev);
+#endif
e1000_irq_disable(adapter);
del_timer_sync(&adapter->tx_fifo_stall_timer);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
-#ifdef CONFIG_E1000_NAPI
- netif_poll_disable(netdev);
-#endif
netdev->tx_queue_len = adapter->tx_queue_len;
adapter->link_speed = 0;
adapter->link_duplex = 0;
@@ -1410,21 +1408,17 @@ e1000_open(struct net_device *netdev)
return -EBUSY;
/* allocate transmit descriptors */
- if ((err = e1000_setup_all_tx_resources(adapter)))
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
goto err_setup_tx;
/* allocate receive descriptors */
- if ((err = e1000_setup_all_rx_resources(adapter)))
- goto err_setup_rx;
-
- err = e1000_request_irq(adapter);
+ err = e1000_setup_all_rx_resources(adapter);
if (err)
- goto err_req_irq;
+ goto err_setup_rx;
e1000_power_up_phy(adapter);
- if ((err = e1000_up(adapter)))
- goto err_up;
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
@@ -1437,12 +1431,33 @@ e1000_open(struct net_device *netdev)
e1000_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as e1000_up() */
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+#ifdef CONFIG_E1000_NAPI
+ netif_poll_enable(netdev);
+#endif
+
+ e1000_irq_enable(adapter);
+
+ /* fire a link status change interrupt to start the watchdog */
+ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
+
return E1000_SUCCESS;
-err_up:
- e1000_power_down_phy(adapter);
- e1000_free_irq(adapter);
err_req_irq:
+ e1000_release_hw_control(adapter);
+ e1000_power_down_phy(adapter);
e1000_free_all_rx_resources(adapter);
err_setup_rx:
e1000_free_all_tx_resources(adapter);
@@ -3363,12 +3378,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
(adapter->hw.mac_type == e1000_82573))
e1000_transfer_dhcp_info(adapter, skb);
- local_irq_save(flags);
- if (!spin_trylock(&tx_ring->tx_lock)) {
+ if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
/* Collision - tell upper layer to requeue */
- local_irq_restore(flags);
return NETDEV_TX_LOCKED;
- }
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists