| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1178068571.4820.50.camel@dell>
Date: Tue, 01 May 2007 18:16:11 -0700
From: "Michael Chan" <mchan@...adcom.com>
To: davem@...emloft.net, netdev@...r.kernel.org
Subject: [PATCH 14/20][BNX2]: Re-structure the 2.5G Serdes code.
[BNX2]: Re-structure the 2.5G Serdes code.
Add some common procedures to handle enabling and disabling 2.5G.
Add some missing code to resolve flow control.
Add SUPPORTED_2500baseX_Full and ADVERTISED_2500baseX_Full in
ethtool.h.
Signed-off-by: Michael Chan <mchan@...adcom.com>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index c265068..eac52a1 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -899,6 +899,86 @@ bnx2_set_mac_link(struct bnx2 *bp)
}
static int
+bnx2_test_and_enable_2g5(struct bnx2 *bp)
+{
+ u32 up1;
+ int ret = 1;
+
+ if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
+ return 0;
+
+ if (bp->autoneg & AUTONEG_SPEED)
+ bp->advertising |= ADVERTISED_2500baseX_Full;
+
+ bnx2_read_phy(bp, bp->mii_up1, &up1);
+ if (!(up1 & BCM5708S_UP1_2G5)) {
+ up1 |= BCM5708S_UP1_2G5;
+ bnx2_write_phy(bp, bp->mii_up1, up1);
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int
+bnx2_test_and_disable_2g5(struct bnx2 *bp)
+{
+ u32 up1;
+ int ret = 0;
+
+ if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
+ return 0;
+
+ bnx2_read_phy(bp, bp->mii_up1, &up1);
+ if (up1 & BCM5708S_UP1_2G5) {
+ up1 &= ~BCM5708S_UP1_2G5;
+ bnx2_write_phy(bp, bp->mii_up1, up1);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+static void
+bnx2_enable_forced_2g5(struct bnx2 *bp)
+{
+ u32 bmcr;
+
+ if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
+ return;
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+ bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
+ bmcr |= BCM5708S_BMCR_FORCE_2500;
+ }
+
+ if (bp->autoneg & AUTONEG_SPEED) {
+ bmcr &= ~BMCR_ANENABLE;
+ if (bp->req_duplex == DUPLEX_FULL)
+ bmcr |= BMCR_FULLDPLX;
+ }
+ bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
+}
+
+static void
+bnx2_disable_forced_2g5(struct bnx2 *bp)
+{
+ u32 bmcr;
+
+ if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
+ return;
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+ bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
+ bmcr &= ~BCM5708S_BMCR_FORCE_2500;
+ }
+
+ if (bp->autoneg & AUTONEG_SPEED)
+ bmcr |= BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_ANRESTART;
+ bnx2_write_phy(bp, bp->mii_bmcr, bmcr);
+}
+
+static int
bnx2_set_link(struct bnx2 *bp)
{
u32 bmsr;
@@ -941,17 +1021,9 @@ bnx2_set_link(struct bnx2 *bp)
}
else {
if ((bp->phy_flags & PHY_SERDES_FLAG) &&
- (bp->autoneg & AUTONEG_SPEED)) {
+ (bp->autoneg & AUTONEG_SPEED))
+ bnx2_disable_forced_2g5(bp);
- u32 bmcr;
-
- bnx2_read_phy(bp, MII_BMCR, &bmcr);
- bmcr &= ~BCM5708S_BMCR_FORCE_2500;
- if (!(bmcr & BMCR_ANENABLE)) {
- bnx2_write_phy(bp, MII_BMCR, bmcr |
- BMCR_ANENABLE);
- }
- }
bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
bp->link_up = 0;
}
@@ -1026,34 +1098,32 @@ bnx2_phy_get_pause_adv(struct bnx2 *bp)
static int
bnx2_setup_serdes_phy(struct bnx2 *bp)
{
- u32 adv, bmcr, up1;
+ u32 adv, bmcr;
u32 new_adv = 0;
if (!(bp->autoneg & AUTONEG_SPEED)) {
u32 new_bmcr;
int force_link_down = 0;
+ if (bp->req_line_speed == SPEED_2500) {
+ if (!bnx2_test_and_enable_2g5(bp))
+ force_link_down = 1;
+ } else if (bp->req_line_speed == SPEED_1000) {
+ if (bnx2_test_and_disable_2g5(bp))
+ force_link_down = 1;
+ }
bnx2_read_phy(bp, bp->mii_adv, &adv);
adv &= ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF);
bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
- new_bmcr = bmcr & ~(BMCR_ANENABLE | BCM5708S_BMCR_FORCE_2500);
+ new_bmcr = bmcr & ~BMCR_ANENABLE;
new_bmcr |= BMCR_SPEED1000;
- if (bp->req_line_speed == SPEED_2500) {
- new_bmcr |= BCM5708S_BMCR_FORCE_2500;
- bnx2_read_phy(bp, BCM5708S_UP1, &up1);
- if (!(up1 & BCM5708S_UP1_2G5)) {
- up1 |= BCM5708S_UP1_2G5;
- bnx2_write_phy(bp, BCM5708S_UP1, up1);
- force_link_down = 1;
- }
- } else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
- bnx2_read_phy(bp, BCM5708S_UP1, &up1);
- if (up1 & BCM5708S_UP1_2G5) {
- up1 &= ~BCM5708S_UP1_2G5;
- bnx2_write_phy(bp, BCM5708S_UP1, up1);
- force_link_down = 1;
- }
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+ if (bp->req_line_speed == SPEED_2500)
+ new_bmcr |= BCM5708S_BMCR_FORCE_2500;
+ else
+ new_bmcr = bmcr & ~BCM5708S_BMCR_FORCE_2500;
}
if (bp->req_duplex == DUPLEX_FULL) {
@@ -1080,15 +1150,14 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
}
bnx2_write_phy(bp, bp->mii_adv, adv);
bnx2_write_phy(bp, bp->mii_bmcr, new_bmcr);
+ } else {
+ bnx2_resolve_flow_ctrl(bp);
+ bnx2_set_mac_link(bp);
}
return 0;
}
- if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) {
- bnx2_read_phy(bp, BCM5708S_UP1, &up1);
- up1 |= BCM5708S_UP1_2G5;
- bnx2_write_phy(bp, BCM5708S_UP1, up1);
- }
+ bnx2_test_and_enable_2g5(bp);
if (bp->advertising & ADVERTISED_1000baseT_Full)
new_adv |= ADVERTISE_1000XFULL;
@@ -1122,6 +1191,9 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
bp->current_interval = SERDES_AN_TIMEOUT;
bp->serdes_an_pending = 1;
mod_timer(&bp->timer, jiffies + bp->current_interval);
+ } else {
+ bnx2_resolve_flow_ctrl(bp);
+ bnx2_set_mac_link(bp);
}
return 0;
@@ -4300,16 +4372,11 @@ bnx2_5708_serdes_timer(struct bnx2 *bp)
u32 bmcr;
bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
-
if (bmcr & BMCR_ANENABLE) {
- bmcr &= ~BMCR_ANENABLE;
- bmcr |= BMCR_FULLDPLX | BCM5708S_BMCR_FORCE_2500;
- bnx2_write_phy(bp, MII_BMCR, bmcr);
+ bnx2_enable_forced_2g5(bp);
bp->current_interval = SERDES_FORCED_TIMEOUT;
} else {
- bmcr &= ~(BMCR_FULLDPLX | BCM5708S_BMCR_FORCE_2500);
- bmcr |= BMCR_ANENABLE;
- bnx2_write_phy(bp, MII_BMCR, bmcr);
+ bnx2_disable_forced_2g5(bp);
bp->serdes_an_pending = 2;
bp->current_interval = bp->timer_interval;
}
@@ -4880,6 +4947,8 @@ bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (bp->phy_flags & PHY_SERDES_FLAG) {
cmd->supported |= SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE;
+ if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG)
+ cmd->supported |= SUPPORTED_2500baseX_Full;
cmd->port = PORT_FIBRE;
}
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c6310ae..f2d248f 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -434,6 +434,7 @@ struct ethtool_ops {
#define SUPPORTED_10000baseT_Full (1 << 12)
#define SUPPORTED_Pause (1 << 13)
#define SUPPORTED_Asym_Pause (1 << 14)
+#define SUPPORTED_2500baseX_Full (1 << 15)
/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half (1 << 0)
@@ -451,6 +452,7 @@ struct ethtool_ops {
#define ADVERTISED_10000baseT_Full (1 << 12)
#define ADVERTISED_Pause (1 << 13)
#define ADVERTISED_Asym_Pause (1 << 14)
+#define ADVERTISED_2500baseX_Full (1 << 15)
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists