| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1178177509.4909.78.camel@dell>
Date: Thu, 03 May 2007 00:31:49 -0700
From: "Michael Chan" <mchan@...adcom.com>
To: "David Miller" <davem@...emloft.net>
cc: "netdev" <netdev@...r.kernel.org>
Subject: [PATCH v2 15/16][BNX2]: Print bus information for PCIE devices.
[BNX2]: Print bus information for PCIE devices.
Fix the code to print PCI or PCIE bus information for all devices.
Signed-off-by: Michael Chan <mchan@...adcom.com>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 97ed400..85760f7 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6040,6 +6040,58 @@ bnx2_get_5709_media(struct bnx2 *bp)
}
}
+static void __devinit
+bnx2_get_pci_speed(struct bnx2 *bp)
+{
+ u32 reg;
+
+ reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS);
+ if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) {
+ u32 clkreg;
+
+ bp->flags |= PCIX_FLAG;
+
+ clkreg = REG_RD(bp, BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS);
+
+ clkreg &= BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET;
+ switch (clkreg) {
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ:
+ bp->bus_speed_mhz = 133;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ:
+ bp->bus_speed_mhz = 100;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ:
+ bp->bus_speed_mhz = 66;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ:
+ bp->bus_speed_mhz = 50;
+ break;
+
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ:
+ case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ:
+ bp->bus_speed_mhz = 33;
+ break;
+ }
+ }
+ else {
+ if (reg & BNX2_PCICFG_MISC_STATUS_M66EN)
+ bp->bus_speed_mhz = 66;
+ else
+ bp->bus_speed_mhz = 33;
+ }
+
+ if (reg & BNX2_PCICFG_MISC_STATUS_32BIT_DET)
+ bp->flags |= PCI_32BIT_FLAG;
+
+}
+
static int __devinit
bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
{
@@ -6118,7 +6170,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->chip_id = REG_RD(bp, BNX2_MISC_ID);
- if (CHIP_NUM(bp) != CHIP_NUM_5709) {
+ if (CHIP_NUM(bp) == CHIP_NUM_5709) {
+ if (pci_find_capability(pdev, PCI_CAP_ID_EXP) == 0) {
+ dev_err(&pdev->dev,
+ "Cannot find PCIE capability, aborting.\n");
+ rc = -EIO;
+ goto err_out_unmap;
+ }
+ bp->flags |= PCIE_FLAG;
+ } else {
bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
if (bp->pcix_cap == 0) {
dev_err(&pdev->dev,
@@ -6153,51 +6213,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
goto err_out_unmap;
}
- /* Get bus information. */
- reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS);
- if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) {
- u32 clkreg;
-
- bp->flags |= PCIX_FLAG;
-
- clkreg = REG_RD(bp, BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS);
-
- clkreg &= BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET;
- switch (clkreg) {
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ:
- bp->bus_speed_mhz = 133;
- break;
-
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ:
- bp->bus_speed_mhz = 100;
- break;
-
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ:
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ:
- bp->bus_speed_mhz = 66;
- break;
-
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ:
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ:
- bp->bus_speed_mhz = 50;
- break;
-
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW:
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ:
- case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ:
- bp->bus_speed_mhz = 33;
- break;
- }
- }
- else {
- if (reg & BNX2_PCICFG_MISC_STATUS_M66EN)
- bp->bus_speed_mhz = 66;
- else
- bp->bus_speed_mhz = 33;
- }
-
- if (reg & BNX2_PCICFG_MISC_STATUS_32BIT_DET)
- bp->flags |= PCI_32BIT_FLAG;
+ if (!(bp->flags & PCIE_FLAG))
+ bnx2_get_pci_speed(bp);
/* 5706A0 may falsely detect SERR and PERR. */
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
@@ -6381,6 +6398,26 @@ err_out:
return rc;
}
+static char * __devinit
+bnx2_bus_string(struct bnx2 *bp, char *str)
+{
+ char *s = str;
+
+ if (bp->flags & PCIE_FLAG) {
+ s += sprintf(s, "PCI Express");
+ } else {
+ s += sprintf(s, "PCI");
+ if (bp->flags & PCIX_FLAG)
+ s += sprintf(s, "-X");
+ if (bp->flags & PCI_32BIT_FLAG)
+ s += sprintf(s, " 32-bit");
+ else
+ s += sprintf(s, " 64-bit");
+ s += sprintf(s, " %dMHz", bp->bus_speed_mhz);
+ }
+ return str;
+}
+
static int __devinit
bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -6388,6 +6425,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
struct net_device *dev = NULL;
struct bnx2 *bp;
int rc, i;
+ char str[40];
if (version_printed++ == 0)
printk(KERN_INFO "%s", version);
@@ -6456,15 +6494,13 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return rc;
}
- printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz found at mem %lx, "
+ printk(KERN_INFO "%s: %s (%c%d) %s found at mem %lx, "
"IRQ %d, ",
dev->name,
bp->name,
((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
((CHIP_ID(bp) & 0x0ff0) >> 4),
- ((bp->flags & PCIX_FLAG) ? "-X" : ""),
- ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
- bp->bus_speed_mhz,
+ bnx2_bus_string(bp, str),
dev->base_addr,
bp->pdev->irq);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 121576d..322153c 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6476,6 +6476,7 @@ struct bnx2 {
#define ASF_ENABLE_FLAG 0x00000040
#define MSI_CAP_FLAG 0x00000080
#define ONE_SHOT_MSI_FLAG 0x00000100
+#define PCIE_FLAG 0x00000200
/* Put tx producer and consumer fields in separate cache lines. */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists