| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200705110553.l4B5rmC9007864@shell0.pdx.osdl.net>
Date: Thu, 10 May 2007 22:53:48 -0700
From: akpm@...ux-foundation.org
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, akpm@...ux-foundation.org,
jengelh@...ux01.gwdg.de, jengelh@....de
Subject: [patch 6/8] Use menuconfig objects: ARCNET
From: Jan Engelhardt <jengelh@...ux01.gwdg.de>
Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: Jan Engelhardt <jengelh@....de>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
---
drivers/net/arcnet/Kconfig | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff -puN drivers/net/arcnet/Kconfig~use-menuconfig-objects-arcnet drivers/net/arcnet/Kconfig
--- a/drivers/net/arcnet/Kconfig~use-menuconfig-objects-arcnet
+++ a/drivers/net/arcnet/Kconfig
@@ -2,10 +2,8 @@
# Arcnet configuration
#
-menu "ARCnet devices"
+menuconfig ARCNET
depends on NETDEVICES && (ISA || PCI)
-
-config ARCNET
tristate "ARCnet support"
---help---
If you have a network card of this type, say Y and check out the
@@ -25,9 +23,10 @@ config ARCNET
<file:Documentation/networking/net-modules.txt>. The module will
be called arcnet.
+if ARCNET
+
config ARCNET_1201
tristate "Enable standard ARCNet packet format (RFC 1201)"
- depends on ARCNET
help
This allows you to use RFC1201 with your ARCnet card via the virtual
arc0 device. You need to say Y here to communicate with
@@ -38,7 +37,6 @@ config ARCNET_1201
config ARCNET_1051
tristate "Enable old ARCNet packet format (RFC 1051)"
- depends on ARCNET
---help---
This allows you to use RFC1051 with your ARCnet card via the virtual
arc0s device. You only need arc0s if you want to talk to ARCnet
@@ -53,7 +51,6 @@ config ARCNET_1051
config ARCNET_RAW
tristate "Enable raw mode packet interface"
- depends on ARCNET
help
ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely
to work unless talking to a copy of the same Linux arcnet driver,
@@ -61,7 +58,6 @@ config ARCNET_RAW
config ARCNET_CAP
tristate "Enable CAP mode packet interface"
- depends on ARCNET
help
ARCnet "cap mode" packet encapsulation. Used to get the hardware
acknowledge back to userspace. After the initial protocol byte every
@@ -80,7 +76,6 @@ config ARCNET_CAP
config ARCNET_COM90xx
tristate "ARCnet COM90xx (normal) chipset driver"
- depends on ARCNET
help
This is the chipset driver for the standard COM90xx cards. If you
have always used the old ARCnet driver without knowing what type of
@@ -92,7 +87,6 @@ config ARCNET_COM90xx
config ARCNET_COM90xxIO
tristate "ARCnet COM90xx (IO mapped) chipset driver"
- depends on ARCNET
---help---
This is the chipset driver for the COM90xx cards, using them in
IO-mapped mode instead of memory-mapped mode. This is slower than
@@ -105,7 +99,6 @@ config ARCNET_COM90xxIO
config ARCNET_RIM_I
tristate "ARCnet COM90xx (RIM I) chipset driver"
- depends on ARCNET
---help---
This is yet another chipset driver for the COM90xx cards, but this
time only using memory-mapped mode, and no IO ports at all. This
@@ -118,7 +111,6 @@ config ARCNET_RIM_I
config ARCNET_COM20020
tristate "ARCnet COM20020 chipset driver"
- depends on ARCNET
help
This is the driver for the new COM20020 chipset. It supports such
things as promiscuous mode, so packet sniffing is possible, and
@@ -136,5 +128,4 @@ config ARCNET_COM20020_PCI
tristate "Support for COM20020 on PCI"
depends on ARCNET_COM20020 && PCI
-endmenu
-
+endif # ARCNET
_
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists