| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070514234258.GC4511@austin.ibm.com>
Date: Mon, 14 May 2007 18:42:58 -0500
From: linas@...tin.ibm.com (Linas Vepstas)
To: Jeff Garzik <jgarzik@...ox.com>
Cc: linux-pci@...ey.karlin.mff.cuni.cz, netdev@...r.kernel.org,
James.Bottomley@...elEye.com, linux-kernel@...r.kernel.org,
Ramkrishna Vepa <Ramkrishna.Vepa@...erion.com>,
Raghavendra Koushik <raghavendra.koushik@...erion.com>,
Wen Xiong <wenxiong@...ibm.com>
Subject: Re: [PATCH 1/2] s2io: add PCI error recovery support
I failed to cc some of the people on the cc list ... so am resending.
--linas
On Mon, May 14, 2007 at 06:37:30PM -0500, Linas Vepstas wrote:
>
> This patch adds PCI error recovery support to the
> s2io 10-Gigabit ethernet device driver. Third revision,
> blocks interrupts and the watchdog.
>
> Tested, seems to work well.
>
> Signed-off-by: Linas Vepstas <linas@...tin.ibm.com>
> Acked-by: Ramkrishna Vepa <Ramkrishna.Vepa@...erion.com>
> Cc: Raghavendra Koushik <raghavendra.koushik@...erion.com>
> Cc: Wen Xiong <wenxiong@...ibm.com>
>
> ----
>
> Jeff, please apply for 2.6.22
>
> --linas
>
>
> drivers/net/s2io.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++---
> drivers/net/s2io.h | 5 ++
> 2 files changed, 116 insertions(+), 5 deletions(-)
>
> Index: linux-2.6.22-rc1/drivers/net/s2io.c
> ===================================================================
> --- linux-2.6.22-rc1.orig/drivers/net/s2io.c 2007-05-14 17:05:03.000000000 -0500
> +++ linux-2.6.22-rc1/drivers/net/s2io.c 2007-05-14 17:23:45.000000000 -0500
> @@ -480,11 +480,18 @@ static struct pci_device_id s2io_tbl[] _
>
> MODULE_DEVICE_TABLE(pci, s2io_tbl);
>
> +static struct pci_error_handlers s2io_err_handler = {
> + .error_detected = s2io_io_error_detected,
> + .slot_reset = s2io_io_slot_reset,
> + .resume = s2io_io_resume,
> +};
> +
> static struct pci_driver s2io_driver = {
> .name = "S2IO",
> .id_table = s2io_tbl,
> .probe = s2io_init_nic,
> .remove = __devexit_p(s2io_rem_nic),
> + .err_handler = &s2io_err_handler,
> };
>
> /* A simplifier macro used both by init and free shared_mem Fns(). */
> @@ -2700,6 +2707,9 @@ static void s2io_netpoll(struct net_devi
> u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
> int i;
>
> + if (pci_channel_offline(nic->pdev))
> + return;
> +
> disable_irq(dev->irq);
>
> atomic_inc(&nic->isr_cnt);
> @@ -3225,6 +3235,8 @@ static void alarm_intr_handler(struct s2
> int i;
> if (atomic_read(&nic->card_state) == CARD_DOWN)
> return;
> + if (pci_channel_offline(nic->pdev))
> + return;
> nic->mac_control.stats_info->sw_stat.ring_full_cnt = 0;
> /* Handling the XPAK counters update */
> if(nic->mac_control.stats_info->xpak_stat.xpak_timer_count < 72000) {
> @@ -4324,6 +4336,10 @@ static irqreturn_t s2io_isr(int irq, voi
> struct mac_info *mac_control;
> struct config_param *config;
>
> + /* Pretend we handled any irq's from a disconnected card */
> + if (pci_channel_offline(sp->pdev))
> + return IRQ_NONE;
> +
> atomic_inc(&sp->isr_cnt);
> mac_control = &sp->mac_control;
> config = &sp->config;
> @@ -6579,7 +6595,7 @@ static void s2io_rem_isr(struct s2io_nic
> } while(cnt < 5);
> }
>
> -static void s2io_card_down(struct s2io_nic * sp)
> +static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
> {
> int cnt = 0;
> struct XENA_dev_config __iomem *bar0 = sp->bar0;
> @@ -6594,7 +6610,8 @@ static void s2io_card_down(struct s2io_n
> atomic_set(&sp->card_state, CARD_DOWN);
>
> /* disable Tx and Rx traffic on the NIC */
> - stop_nic(sp);
> + if (do_io)
> + stop_nic(sp);
>
> s2io_rem_isr(sp);
>
> @@ -6602,7 +6619,7 @@ static void s2io_card_down(struct s2io_n
> tasklet_kill(&sp->task);
>
> /* Check if the device is Quiescent and then Reset the NIC */
> - do {
> + while(do_io) {
> /* As per the HW requirement we need to replenish the
> * receive buffer to avoid the ring bump. Since there is
> * no intention of processing the Rx frame at this pointwe are
> @@ -6627,8 +6644,9 @@ static void s2io_card_down(struct s2io_n
> (unsigned long long) val64);
> break;
> }
> - } while (1);
> - s2io_reset(sp);
> + }
> + if (do_io)
> + s2io_reset(sp);
>
> spin_lock_irqsave(&sp->tx_lock, flags);
> /* Free all Tx buffers */
> @@ -6643,6 +6661,11 @@ static void s2io_card_down(struct s2io_n
> clear_bit(0, &(sp->link_state));
> }
>
> +static void s2io_card_down(struct s2io_nic * sp)
> +{
> + do_s2io_card_down(sp, 1);
> +}
> +
> static int s2io_card_up(struct s2io_nic * sp)
> {
> int i, ret = 0;
> @@ -8020,3 +8043,86 @@ static void lro_append_pkt(struct s2io_n
> sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
> return;
> }
> +
> +/**
> + * s2io_io_error_detected - called when PCI error is detected
> + * @pdev: Pointer to PCI device
> + * @state: The current pci conneection state
> + *
> + * This function is called after a PCI bus error affecting
> + * this device has been detected.
> + */
> +static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
> + pci_channel_state_t state)
> +{
> + struct net_device *netdev = pci_get_drvdata(pdev);
> + struct s2io_nic *sp = netdev->priv;
> +
> + netif_device_detach(netdev);
> +
> + if (netif_running(netdev)) {
> + /* Bring down the card, while avoiding PCI I/O */
> + do_s2io_card_down(sp, 0);
> + sp->device_close_flag = TRUE; /* Device is shut down. */
> + }
> + pci_disable_device(pdev);
> +
> + return PCI_ERS_RESULT_NEED_RESET;
> +}
> +
> +/**
> + * s2io_io_slot_reset - called after the pci bus has been reset.
> + * @pdev: Pointer to PCI device
> + *
> + * Restart the card from scratch, as if from a cold-boot.
> + * At this point, the card has exprienced a hard reset,
> + * followed by fixups by BIOS, and has its config space
> + * set up identically to what it was at cold boot.
> + */
> +static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
> +{
> + struct net_device *netdev = pci_get_drvdata(pdev);
> + struct s2io_nic *sp = netdev->priv;
> +
> + if (pci_enable_device(pdev)) {
> + printk(KERN_ERR "s2io: "
> + "Cannot re-enable PCI device after reset.\n");
> + return PCI_ERS_RESULT_DISCONNECT;
> + }
> +
> + pci_set_master(pdev);
> + s2io_reset(sp);
> +
> + return PCI_ERS_RESULT_RECOVERED;
> +}
> +
> +/**
> + * s2io_io_resume - called when traffic can start flowing again.
> + * @pdev: Pointer to PCI device
> + *
> + * This callback is called when the error recovery driver tells
> + * us that its OK to resume normal operation.
> + */
> +static void s2io_io_resume(struct pci_dev *pdev)
> +{
> + struct net_device *netdev = pci_get_drvdata(pdev);
> + struct s2io_nic *sp = netdev->priv;
> +
> + if (netif_running(netdev)) {
> + if (s2io_card_up(sp)) {
> + printk(KERN_ERR "s2io: "
> + "Can't bring device back up after reset.\n");
> + return;
> + }
> +
> + if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
> + s2io_card_down(sp);
> + printk(KERN_ERR "s2io: "
> + "Can't resetore mac addr after reset.\n");
> + return;
> + }
> + }
> +
> + netif_device_attach(netdev);
> + netif_wake_queue(netdev);
> +}
> Index: linux-2.6.22-rc1/drivers/net/s2io.h
> ===================================================================
> --- linux-2.6.22-rc1.orig/drivers/net/s2io.h 2007-05-14 17:05:03.000000000 -0500
> +++ linux-2.6.22-rc1/drivers/net/s2io.h 2007-05-14 17:23:45.000000000 -0500
> @@ -1052,6 +1052,11 @@ static void lro_append_pkt(struct s2io_n
> struct sk_buff *skb, u32 tcp_len);
> static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring);
>
> +static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
> + pci_channel_state_t state);
> +static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev);
> +static void s2io_io_resume(struct pci_dev *pdev);
> +
> #define s2io_tcp_mss(skb) skb_shinfo(skb)->gso_size
> #define s2io_udp_mss(skb) skb_shinfo(skb)->gso_size
> #define s2io_offload_type(skb) skb_shinfo(skb)->gso_type
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists