| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 27 May 2007 02:50:00 +0200 From: Stefan Schmidt <stefan@...enfreihafen.org> To: davem@...emloft.net Cc: netdev@...r.kernel.org Subject: [PATCH] Kill trailing whitespaces in drivers/net/Kconfig Kill all trailing whitespaces in drivers/net/Kconfig. Signed-off-by: Stefan Schmidt <stefan@...enfreihafen.org> --- drivers/net/Kconfig | 48 ++++++++++++++++++++++++------------------------ 1 files changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 30fd479..d8675f1 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -883,12 +883,12 @@ config SMC911X help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. - Say Y if you want it compiled into the kernel, + Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>. - This driver is also available as a module. The module will be - called smc911x. If you want to compile it as a module, say M + This driver is also available as a module. The module will be + called smc911x. If you want to compile it as a module, say M here and read <file:Documentation/kbuild/modules.txt> config NET_VENDOR_RACAL @@ -1221,7 +1221,7 @@ config IBM_EMAC_RX_SKB_HEADROOM will always reserve at least 2 bytes to make IP header aligned, so usually there is no need to add any additional headroom. - + If unsure, set to 0. config IBM_EMAC_PHY_RX_CLK_FIX @@ -1229,10 +1229,10 @@ config IBM_EMAC_PHY_RX_CLK_FIX depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) help Enable this if EMAC attached to a PHY which doesn't generate - RX clock if there is no link, if this is the case, you will + RX clock if there is no link, if this is the case, you will see "TX disable timeout" or "RX disable timeout" in the system log. - + If unsure, say N. config IBM_EMAC_DEBUG @@ -1249,7 +1249,7 @@ config IBM_EMAC_RGMII bool depends on IBM_EMAC && 440GX default y - + config IBM_EMAC_TAH bool depends on IBM_EMAC && 440GX @@ -1482,9 +1482,9 @@ config E100 select MII ---help--- This driver supports Intel(R) PRO/100 family of adapters. - To verify that your adapter is supported, find the board ID number - on the adapter. Look for a label that has a barcode and a number - in the format 123456-001 (six digits hyphen three digits). + To verify that your adapter is supported, find the board ID number + on the adapter. Look for a label that has a barcode and a number + in the format 123456-001 (six digits hyphen three digits). Use the above information and the Adapter & Driver ID Guide at: @@ -1496,7 +1496,7 @@ config E100 <http://appsr.intel.com/scripts-df/support_intel.asp> - More specific information on configuring the driver is in + More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>. To compile this driver as a module, choose M here and read @@ -1950,7 +1950,7 @@ config E1000 depends on PCI ---help--- This driver supports Intel(R) PRO/1000 gigabit ethernet family of - adapters. For more information on how to identify your adapter, go + adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: <http://support.intel.com/support/network/adapter/pro100/21397.htm> @@ -1960,7 +1960,7 @@ config E1000 <http://support.intel.com> - More specific information on configuring the driver is in + More specific information on configuring the driver is in <file:Documentation/networking/e1000.txt>. To compile this driver as a module, choose M here and read @@ -2074,7 +2074,7 @@ config R8169_VLAN ---help--- Say Y here for the r8169 driver to support the functions required by the kernel 802.1Q code. - + If in doubt, say Y. config SIS190 @@ -2100,7 +2100,7 @@ config SKGE and related Gigabit Ethernet adapters. It is a new smaller driver with better performance and more complete ethtool support. - It does not support the link failover and network management + It does not support the link failover and network management features that "portable" vendor supplied sk98lin driver does. This driver supports adapters based on the original Yukon chipset: @@ -2201,16 +2201,16 @@ config SK98LIN - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) - SMC EZ Card 1000 (SMC9452TXV.2) - + The adapters support Jumbo Frames. The dual link adapters support link-failover and dual port features. - Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support - the scatter-gather functionality with sendfile(). Please refer to + Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support + the scatter-gather functionality with sendfile(). Please refer to <file:Documentation/networking/sk98lin.txt> for more information about optional driver parameters. Questions concerning this driver may be addressed to: <linux@...konnect.de> - + If you want to compile this driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read <file:Documentation/kbuild/modules.txt>. The module will @@ -2421,7 +2421,7 @@ config IXGB <http://support.intel.com> - More specific information on configuring the driver is in + More specific information on configuring the driver is in <file:Documentation/networking/ixgb.txt>. To compile this driver as a module, choose M here and read @@ -2449,8 +2449,8 @@ config S2IO tristate "S2IO 10Gbe XFrame NIC" depends on PCI ---help--- - This driver supports the 10Gbe XFrame NIC of S2IO. - More specific information on configuring the driver is in + This driver supports the 10Gbe XFrame NIC of S2IO. + More specific information on configuring the driver is in <file:Documentation/networking/s2io.txt>. config S2IO_NAPI @@ -2824,9 +2824,9 @@ config PPPOE Support for PPP over Ethernet. This driver requires the latest version of pppd from the CVS - repository at cvs.samba.org. Alternatively, see the + repository at cvs.samba.org. Alternatively, see the RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) - which contains instruction on how to use this driver (under + which contains instruction on how to use this driver (under the heading "Kernel mode PPPoE"). config PPPOATM -- 1.5.1.4 - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists