This patch adds the CAN broadcast manager (bcm) protocol. Signed-Off-By: Oliver Hartkopp Signed-Off-By: Urs Thuermann --- include/linux/can/bcm.h | 65 + net/can/Kconfig | 28 net/can/Makefile | 3 net/can/bcm.c | 1671 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 1767 insertions(+) Index: linux-2.6.22-rc3/include/linux/can/bcm.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.22-rc3/include/linux/can/bcm.h 2007-05-30 14:58:03.000000000 +0200 @@ -0,0 +1,65 @@ +/* + * linux/can/bcm.h + * + * Definitions for CAN Broadcast Manager (BCM) + * + * Author: Oliver Hartkopp + * Copyright (c) 2002-2007 Volkswagen Group Electronic Research + * All rights reserved. + * + * Send feedback to + * + */ + +#ifndef CAN_BCM_H +#define CAN_BCM_H + +/** + * struct bcm_msg_head - head of messages to/from the broadcast manager + * @opcode: opcode, see enum below. + * @flags: special flags, see below. + * @count: number of frames to send before changing interval. + * @ival1: interval for the first @count frames. + * @ival2: interval for the following frames. + * @can_id: CAN ID of frames to be sent or received. + * @nframes: number of frames appended to the message head. + * @frames: array of CAN frames. + */ +struct bcm_msg_head { + int opcode; + int flags; + int count; + struct timeval ival1, ival2; + canid_t can_id; + int nframes; + struct can_frame frames[0]; +}; + +enum { + TX_SETUP = 1, /* create (cyclic) transmission task */ + TX_DELETE, /* remove (cyclic) transmission task */ + TX_READ, /* read properties of (cyclic) transmission task */ + TX_SEND, /* send one CAN frame */ + RX_SETUP, /* create RX content filter subscription */ + RX_DELETE, /* remove RX content filter subscription */ + RX_READ, /* read properties of RX content filter subscription */ + TX_STATUS, /* reply to TX_READ request */ + TX_EXPIRED, /* notification on performed transmissions (count=0) */ + RX_STATUS, /* reply to RX_READ request */ + RX_TIMEOUT, /* cyclic message is absent */ + RX_CHANGED /* updated CAN frame (detected content change) */ +}; + +#define SETTIMER 0x0001 +#define STARTTIMER 0x0002 +#define TX_COUNTEVT 0x0004 +#define TX_ANNOUNCE 0x0008 +#define TX_CP_CAN_ID 0x0010 +#define RX_FILTER_ID 0x0020 +#define RX_CHECK_DLC 0x0040 +#define RX_NO_AUTOTIMER 0x0080 +#define RX_ANNOUNCE_RESUME 0x0100 +#define TX_RESET_MULTI_IDX 0x0200 +#define RX_RTR_FRAME 0x0400 + +#endif /* CAN_BCM_H */ Index: linux-2.6.22-rc3/net/can/Kconfig =================================================================== --- linux-2.6.22-rc3.orig/net/can/Kconfig 2007-05-30 14:58:02.000000000 +0200 +++ linux-2.6.22-rc3/net/can/Kconfig 2007-05-30 14:58:03.000000000 +0200 @@ -42,6 +42,34 @@ Say Y here if you want non-root users to be able to access CAN_RAW sockets. +config CAN_BCM + tristate "Broadcast Manager CAN Protocol (with content filtering)" + depends on CAN + default N + ---help--- + The Broadcast Manager offers content filtering, timeout monitoring, + sending of RTR-frames and cyclic CAN messages without permanent user + interaction. The BCM can be 'programmed' via the BSD socket API and + informs you on demand e.g. only on content updates / timeouts. + You probably want to use the bcm socket in most cases where cyclic + CAN messages are used on the bus (e.g. in automotive environments). + To use the Broadcast Manager, use AF_CAN with protocol CAN_BCM. + +config CAN_BCM_USER + bool "Allow non-root users to access CAN broadcast manager sockets" + depends on CAN_BCM + default N + ---help--- + The Controller Area Network is a local field bus transmitting only + broadcast messages without any routing and security concepts. + In the majority of cases the user application has to deal with + raw CAN frames. Therefore it might be reasonable NOT to restrict + the CAN access only to the user root, as known from other networks. + Since CAN_BCM sockets can only send and receive frames to/from CAN + interfaces this does not affect security of others networks. + Say Y here if you want non-root users to be able to access CAN_BCM + sockets. + config CAN_DEBUG_CORE bool "CAN Core debugging messages" depends on CAN Index: linux-2.6.22-rc3/net/can/Makefile =================================================================== --- linux-2.6.22-rc3.orig/net/can/Makefile 2007-05-30 14:58:02.000000000 +0200 +++ linux-2.6.22-rc3/net/can/Makefile 2007-05-30 14:58:03.000000000 +0200 @@ -7,3 +7,6 @@ obj-$(CONFIG_CAN_RAW) += can-raw.o can-raw-objs := raw.o + +obj-$(CONFIG_CAN_BCM) += can-bcm.o +can-bcm-objs := bcm.o Index: linux-2.6.22-rc3/net/can/bcm.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.22-rc3/net/can/bcm.c 2007-05-30 14:58:03.000000000 +0200 @@ -0,0 +1,1671 @@ +/* + * bcm.c - Broadcast Manager to filter/send (cyclic) CAN content + * + * Copyright (c) 2002-2007 Volkswagen Group Electronic Research + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, the following disclaimer and + * the referenced file 'COPYING'. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2 as distributed in the 'COPYING' + * file from the main directory of the linux kernel source. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * Send feedback to + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* use of last_frames[index].can_dlc */ +#define RX_RECV 0x40 /* received data for this element */ +#define RX_THR 0x80 /* element not been sent due to throttle feature */ +#define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */ + +/* get best masking value for can_rx_register() for a given single can_id */ +#define REGMASK(id) ((id & CAN_RTR_FLAG) | ((id & CAN_EFF_FLAG) ? \ + (CAN_EFF_MASK | CAN_EFF_FLAG) : CAN_SFF_MASK)) + +#define IDENT "bcm" +#define CAN_BCM_VERSION CAN_VERSION +static __initdata const char banner[] = KERN_INFO + "can: broadcast manager protocol # rev " CAN_BCM_VERSION "\n"; + +MODULE_DESCRIPTION("PF_CAN broadcast manager protocol"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Oliver Hartkopp "); + +#ifdef CONFIG_CAN_DEBUG_CORE +static int debug = 0; +module_param(debug, int, S_IRUGO); +MODULE_PARM_DESC(debug, "debug print mask: 1:debug, 2:frames, 4:skbs"); +#endif + +/* easy access to can_frame payload */ +static inline u64 GET_U64(const struct can_frame *cp) +{ + return *(u64*)cp->data; +} + +struct bcm_op { + struct list_head list; + int ifindex; + canid_t can_id; + int flags; + unsigned long j_ival1, j_ival2, j_lastmsg; + unsigned long frames_abs, frames_filtered; + struct timer_list timer, thrtimer; + struct timeval ival1, ival2; + struct timeval rx_stamp; + int rx_ifindex; + int count; + int nframes; + int currframe; + struct can_frame *frames; + struct can_frame *last_frames; + struct can_frame sframe; + struct can_frame last_sframe; + struct sock *sk; +}; + +struct bcm_opt { + int bound; + int ifindex; + struct list_head rx_ops; + struct list_head tx_ops; + unsigned long dropped_usr_msgs; + struct proc_dir_entry *bcm_proc_read; + char procname [9]; /* pointer printed in ASCII with \0 */ +}; + +static struct proc_dir_entry *proc_dir = NULL; + +#ifdef CONFIG_CAN_BCM_USER +#define BCM_CAP (-1) +#else +#define BCM_CAP CAP_NET_RAW +#endif + +struct bcm_sock { + struct sock sk; + struct bcm_opt opt; +}; + +static inline struct bcm_opt *bcm_sk(const struct sock *sk) +{ + return &((struct bcm_sock *)sk)->opt; +} + +#define CFSIZ sizeof(struct can_frame) +#define OPSIZ sizeof(struct bcm_op) +#define MHSIZ sizeof(struct bcm_msg_head) + +/* + * rounded_tv2jif - calculate jiffies from timeval including optional up + * @tv: pointer to timeval + * + * Description: + * In opposite to timeval_to_jiffies() provided in include/linux/jiffies.h this + * function is intentionally more relaxed on precise timer ticks to get exact + * one jiffy for requested 1000us on a 1000HZ machine. + * This code is to be removed when upgrading to kernel hrtimer. + * + * Return: + * calculated jiffies (max: ULONG_MAX) + */ +static unsigned long rounded_tv2jif(const struct timeval *tv) +{ + unsigned long sec = tv->tv_sec; + unsigned long usec = tv->tv_usec; + unsigned long jif; + + if (sec > ULONG_MAX / HZ) + return ULONG_MAX; + + /* round up to get at least the requested time */ + usec += 1000000 / HZ - 1; + + jif = usec / (1000000 / HZ); + + if (sec * HZ > ULONG_MAX - jif) + return ULONG_MAX; + + return jif + sec * HZ; +} + +/* + * procfs functions + */ +static char *bcm_proc_getifname(int ifindex) +{ + struct net_device *dev; + + if (!ifindex) + return "any"; + + dev = __dev_get_by_index(ifindex); /* no usage counting */ + if (dev) + return dev->name; + + return "???"; +} + +static int bcm_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len = 0; + struct sock *sk = (struct sock *)data; + struct bcm_opt *bo = bcm_sk(sk); + struct bcm_op *op; + + len += snprintf(page + len, PAGE_SIZE - len, ">>> socket %p", + sk->sk_socket); + len += snprintf(page + len, PAGE_SIZE - len, " / sk %p", sk); + len += snprintf(page + len, PAGE_SIZE - len, " / bo %p", bo); + len += snprintf(page + len, PAGE_SIZE - len, " / dropped %lu", + bo->dropped_usr_msgs); + len += snprintf(page + len, PAGE_SIZE - len, " / bound %s", + bcm_proc_getifname(bo->ifindex)); + len += snprintf(page + len, PAGE_SIZE - len, " <<<\n"); + + list_for_each_entry(op, &bo->rx_ops, list) { + + unsigned long reduction; + + /* print only active entries & prevent division by zero */ + if (!op->frames_abs) + continue; + + len += snprintf(page + len, PAGE_SIZE - len, + "rx_op: %03X %-5s ", + op->can_id, bcm_proc_getifname(op->ifindex)); + len += snprintf(page + len, PAGE_SIZE - len, "[%d]%c ", + op->nframes, + (op->flags & RX_CHECK_DLC)?'d':' '); + if (op->j_ival1) + len += snprintf(page + len, PAGE_SIZE - len, + "timeo=%ld ", op->j_ival1); + + if (op->j_ival2) + len += snprintf(page + len, PAGE_SIZE - len, + "thr=%ld ", op->j_ival2); + + len += snprintf(page + len, PAGE_SIZE - len, + "# recv %ld (%ld) => reduction: ", + op->frames_filtered, op->frames_abs); + + reduction = 100 - (op->frames_filtered * 100) / op->frames_abs; + + len += snprintf(page + len, PAGE_SIZE - len, "%s%ld%%\n", + (reduction == 100)?"near ":"", reduction); + + if (len > PAGE_SIZE - 200) { + /* mark output cut off */ + len += snprintf(page + len, PAGE_SIZE - len, "(..)\n"); + break; + } + } + + list_for_each_entry(op, &bo->tx_ops, list) { + + len += snprintf(page + len, PAGE_SIZE - len, + "tx_op: %03X %s [%d] ", + op->can_id, bcm_proc_getifname(op->ifindex), + op->nframes); + if (op->j_ival1) + len += snprintf(page + len, PAGE_SIZE - len, "t1=%ld ", + op->j_ival1); + + if (op->j_ival2) + len += snprintf(page + len, PAGE_SIZE - len, "t2=%ld ", + op->j_ival2); + + len += snprintf(page + len, PAGE_SIZE - len, "# sent %ld\n", + op->frames_abs); + + if (len > PAGE_SIZE - 100) { + /* mark output cut off */ + len += snprintf(page + len, PAGE_SIZE - len, "(..)\n"); + break; + } + } + + len += snprintf(page + len, PAGE_SIZE - len, "\n"); + + *eof = 1; + return len; +} + +/* + * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface + * of the given bcm tx op + */ +static void bcm_can_tx(struct bcm_op *op) +{ + struct sk_buff *skb; + struct net_device *dev; + struct can_frame *cf = &op->frames[op->currframe]; + + DBG_FRAME("BCM: bcm_can_tx: sending frame", cf); + + /* no target device? => exit */ + if (!op->ifindex) + return; + + dev = dev_get_by_index(op->ifindex); + + if (!dev) { + /* RFC: should this bcm_op remove itself here? */ + return; + } + + skb = alloc_skb(CFSIZ, + in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); + + if (!skb) + goto out; + + memcpy(skb_put(skb, CFSIZ), cf, CFSIZ); + + /* send with loopback */ + skb->dev = dev; + skb->sk = op->sk; + can_send(skb, 1); + + /* update statistics */ + op->currframe++; + op->frames_abs++; + + /* reached last frame? */ + if (op->currframe >= op->nframes) + op->currframe = 0; + out: + dev_put(dev); +} + +/* + * bcm_send_to_user - send a BCM message to the userspace + * (consisting of bcm_msg_head + x CAN frames) + */ +static void bcm_send_to_user(struct bcm_op *op, struct bcm_msg_head *head, + struct can_frame *frames, struct timeval *tv) +{ + struct sk_buff *skb; + struct can_frame *firstframe; + struct sock *sk = op->sk; + int datalen = head->nframes * CFSIZ; + struct sockaddr_can *addr; + int err; + + skb = alloc_skb(sizeof(*head) + datalen, + in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); + if (!skb) + return; + + memcpy(skb_put(skb, sizeof(*head)), head, sizeof(*head)); + + /* can_frames starting here */ + firstframe = (struct can_frame *) skb->tail; + + if (tv) + skb_set_timestamp(skb, tv); /* restore timestamp */ + + addr = (struct sockaddr_can *)skb->cb; + memset(addr, 0, sizeof(*addr)); + addr->can_family = AF_CAN; + /* restore originator for recvfrom() */ + addr->can_ifindex = op->rx_ifindex; + + if (head->nframes) { + memcpy(skb_put(skb, datalen), frames, datalen); + + /* + * the BCM uses the can_dlc-element of the can_frame + * structure for internal purposes. This is only + * relevant for updates that are generated by the + * BCM, where nframes is 1 + */ + if (head->nframes == 1) + firstframe->can_dlc &= BCM_CAN_DLC_MASK; + } + + err = sock_queue_rcv_skb(sk, skb); + if (err < 0) { + struct bcm_opt *bo = bcm_sk(sk); + + DBG("sock_queue_rcv_skb failed: %d\n", err); + kfree_skb(skb); + /* don't care about overflows in this statistic */ + bo->dropped_usr_msgs++; + } +} + +/* + * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions + */ +static void bcm_tx_timeout_handler(unsigned long data) +{ + struct bcm_op *op = (struct bcm_op*)data; + + DBG("Called with bcm_op %p\n", op); + + if (op->j_ival1 && (op->count > 0)) { + + op->count--; + if (!op->count && (op->flags & TX_COUNTEVT)) { + struct bcm_msg_head msg_head; + + /* create notification to user */ + DBG("sending TX_EXPIRED for can_id %03X\n", + op->can_id); + + msg_head.opcode = TX_EXPIRED; + msg_head.flags = op->flags; + msg_head.count = op->count; + msg_head.ival1 = op->ival1; + msg_head.ival2 = op->ival2; + msg_head.can_id = op->can_id; + msg_head.nframes = 0; + + bcm_send_to_user(op, &msg_head, NULL, NULL); + } + } + + DBG("count=%d j_ival1=%ld j_ival2=%ld\n", + op->count, op->j_ival1, op->j_ival2); + + if (op->j_ival1 && (op->count > 0)) { + + op->timer.expires = jiffies + op->j_ival1; + add_timer(&op->timer); + + DBG("adding timer ival1. func=%p data=%p exp=0x%08X\n", + op->timer.function, + (char*) op->timer.data, + (unsigned int) op->timer.expires); + + /* send (next) frame */ + bcm_can_tx(op); + + } else { + if (op->j_ival2) { + op->timer.expires = jiffies + op->j_ival2; + add_timer(&op->timer); + + DBG("adding timer ival2. func=%p data=%p exp=0x%08X\n", + op->timer.function, + (char*) op->timer.data, + (unsigned int) op->timer.expires); + + /* send (next) frame */ + bcm_can_tx(op); + + } else + DBG("no timer restart\n"); + } + + return; +} + +/* + * bcm_rx_changed - create a RX_CHANGED notification due to changed content + */ +static void bcm_rx_changed(struct bcm_op *op, struct can_frame *data) +{ + struct bcm_msg_head head; + + op->j_lastmsg = jiffies; + + /* update statistics */ + op->frames_filtered++; + + /* prevent statistics overflow */ + if (op->frames_filtered > ULONG_MAX/100) + op->frames_filtered = op->frames_abs = 0; + + DBG("setting j_lastmsg to 0x%08X for rx_op %p\n", + (unsigned int) op->j_lastmsg, op); + DBG("sending notification\n"); + + head.opcode = RX_CHANGED; + head.flags = op->flags; + head.count = op->count; + head.ival1 = op->ival1; + head.ival2 = op->ival2; + head.can_id = op->can_id; + head.nframes = 1; + + bcm_send_to_user(op, &head, data, &op->rx_stamp); +} + +/* + * bcm_rx_update_and_send - process a detected relevant receive content change + * 1. update the last received data + * 2. send a notification to the user (if possible) + */ +static void bcm_rx_update_and_send(struct bcm_op *op, + struct can_frame *lastdata, + struct can_frame *rxdata) +{ + unsigned long nexttx = op->j_lastmsg + op->j_ival2; + + memcpy(lastdata, rxdata, CFSIZ); + + /* mark as used */ + lastdata->can_dlc |= RX_RECV; + + /* throttle bcm_rx_changed ? */ + if ((op->thrtimer.expires) || + ((op->j_ival2) && (nexttx > jiffies))) { + /* we are already waiting OR we have to start waiting */ + + /* mark as 'throttled' */ + lastdata->can_dlc |= RX_THR; + + if (!(op->thrtimer.expires)) { + /* start the timer only the first time */ + op->thrtimer.expires = nexttx; + add_timer(&op->thrtimer); + + DBG("adding thrtimer. func=%p data=%p exp=0x%08X\n", + op->thrtimer.function, + (char*) op->thrtimer.data, + (unsigned int) op->thrtimer.expires); + } + + } else { + /* send RX_CHANGED to the user immediately */ + bcm_rx_changed(op, rxdata); + } +} + +/* + * bcm_rx_cmp_to_index - (bit)compares the currently received data to formerly + * received data stored in op->last_frames[] + */ +static void bcm_rx_cmp_to_index(struct bcm_op *op, int index, + struct can_frame *rxdata) +{ + /* + * no one uses the MSBs of can_dlc for comparation, + * so we use it here to detect the first time of reception + */ + + if (!(op->last_frames[index].can_dlc & RX_RECV)) { + /* received data for the first time => send update to user */ + DBG("first time :)\n"); + bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); + return; + } + + /* do a real check in can_frame data section */ + + DBG("op->frames[index].data = 0x%016llx\n", + GET_U64(&op->frames[index])); + DBG("op->last_frames[index].data = 0x%016llx\n", + GET_U64(&op->last_frames[index])); + DBG("rxdata->data = 0x%016llx\n", GET_U64(rxdata)); + + if ((GET_U64(&op->frames[index]) & GET_U64(rxdata)) != + (GET_U64(&op->frames[index]) & GET_U64(&op->last_frames[index]))) { + DBG("relevant data change :)\n"); + bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); + return; + } + + if (op->flags & RX_CHECK_DLC) { + /* do a real check in can_frame dlc */ + if (rxdata->can_dlc != (op->last_frames[index].can_dlc & + BCM_CAN_DLC_MASK)) { + DBG("dlc change :)\n"); + bcm_rx_update_and_send(op, &op->last_frames[index], + rxdata); + return; + } + } + DBG("no relevant change :(\n"); +} + +/* + * bcm_rx_starttimer - enable timeout monitoring for CAN frame receiption + */ +static void bcm_rx_starttimer(struct bcm_op *op) +{ + if (op->flags & RX_NO_AUTOTIMER) + return; + + if (op->j_ival1) { + op->timer.expires = jiffies + op->j_ival1; + + DBG("adding rx timeout timer ival1. func=%p data=%p " + "exp=0x%08X\n", + op->timer.function, + (char*) op->timer.data, + (unsigned int) op->timer.expires); + + add_timer(&op->timer); + } +} + +/* + * bcm_rx_timeout_handler - when the (cyclic) CAN frame receiption timed out + */ +static void bcm_rx_timeout_handler(unsigned long data) +{ + struct bcm_op *op = (struct bcm_op*)data; + struct bcm_msg_head msg_head; + + DBG("sending RX_TIMEOUT for can_id %03X. op is %p\n", op->can_id, op); + + msg_head.opcode = RX_TIMEOUT; + msg_head.flags = op->flags; + msg_head.count = op->count; + msg_head.ival1 = op->ival1; + msg_head.ival2 = op->ival2; + msg_head.can_id = op->can_id; + msg_head.nframes = 0; + + bcm_send_to_user(op, &msg_head, NULL, NULL); + + /* no restart of the timer is done here! */ + + /* if user wants to be informed, when cyclic CAN-Messages come back */ + if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) { + /* clear received can_frames to indicate 'nothing received' */ + memset(op->last_frames, 0, op->nframes * CFSIZ); + DBG("RX_ANNOUNCE_RESTART\n"); + } +} + +/* + * bcm_rx_thr_handler - the time for blocked content updates is over now: + * Check for throttled data and send it to the userspace + */ +static void bcm_rx_thr_handler(unsigned long data) +{ + struct bcm_op *op = (struct bcm_op*)data; + int i = 0; + + /* mark disabled / consumed timer */ + op->thrtimer.expires = 0; + + if (op->nframes > 1) { + DBG("sending MUX RX_CHANGED for can_id %03X. op is %p\n", + op->can_id, op); + /* for MUX filter we start at index 1 */ + for (i=1; inframes; i++) { + if ((op->last_frames) && + (op->last_frames[i].can_dlc & RX_THR)) { + op->last_frames[i].can_dlc &= ~RX_THR; + bcm_rx_changed(op, &op->last_frames[i]); + } + } + + } else { + DBG("sending simple RX_CHANGED for can_id %03X. op is %p\n", + op->can_id, op); + /* for RX_FILTER_ID and simple filter */ + if (op->last_frames && (op->last_frames[0].can_dlc & RX_THR)) { + op->last_frames[0].can_dlc &= ~RX_THR; + bcm_rx_changed(op, &op->last_frames[0]); + } + } +} + +/* + * bcm_rx_handler - handle a CAN frame receiption + */ +static void bcm_rx_handler(struct sk_buff *skb, void *data) +{ + struct bcm_op *op = (struct bcm_op*)data; + struct can_frame rxframe; + int i; + + /* disable timeout */ + del_timer(&op->timer); + + DBG("Called with bcm_op %p\n", op); + + if (skb->len == sizeof(rxframe)) { + memcpy(&rxframe, skb->data, sizeof(rxframe)); + /* save rx timestamp */ + skb_get_timestamp(skb, &op->rx_stamp); + /* save originator for recvfrom() */ + op->rx_ifindex = skb->dev->ifindex; + /* update statistics */ + op->frames_abs++; + kfree_skb(skb); + DBG("got can_frame with can_id %03X\n", rxframe.can_id); + + } else { + DBG("Wrong skb->len = %d\n", skb->len); + kfree_skb(skb); + return; + } + + DBG_FRAME("BCM: bcm_rx_handler: CAN frame", &rxframe); + + if (op->can_id != rxframe.can_id) { + DBG("ERROR! Got wrong can_id %03X! Expected %03X.\n", + rxframe.can_id, op->can_id); + return; + } + + if (op->flags & RX_RTR_FRAME) { + /* send reply for RTR-request */ + DBG("RTR-request\n"); + + /* send op->frames[0] to CAN device */ + bcm_can_tx(op); + return; + } + + if (op->flags & RX_FILTER_ID) { + /* the easiest case */ + DBG("Easy does it with RX_FILTER_ID\n"); + + bcm_rx_update_and_send(op, &op->last_frames[0], &rxframe); + bcm_rx_starttimer(op); + return; + } + + if (op->nframes == 1) { + /* simple compare with index 0 */ + DBG("Simple compare\n"); + + bcm_rx_cmp_to_index(op, 0, &rxframe); + bcm_rx_starttimer(op); + return; + } + + if (op->nframes > 1) { + /* multiplex compare */ + DBG("Multiplex compare\n"); + + /* + * find the first multiplex mask that fits. + * Remark: The MUX-mask is stored in index 0 + */ + + for (i=1; i < op->nframes; i++) { + if ((GET_U64(&op->frames[0]) & GET_U64(&rxframe)) == + (GET_U64(&op->frames[0]) & + GET_U64(&op->frames[i]))) { + DBG("found MUX index %d\n", i); + bcm_rx_cmp_to_index(op, i, &rxframe); + break; + } + } + bcm_rx_starttimer(op); + } +} + +/* + * helpers for bcm_op handling: find & delete bcm [rx|tx] op elements + */ +static struct bcm_op *bcm_find_op(struct list_head *ops, canid_t can_id, + int ifindex) +{ + struct bcm_op *op; + + list_for_each_entry(op, ops, list) { + if ((op->can_id == can_id) && (op->ifindex == ifindex)) + return op; + } + + return NULL; +} + +static void bcm_remove_op(struct bcm_op *op) +{ + del_timer(&op->timer); + del_timer(&op->thrtimer); + + if ((op->frames) && (op->frames != &op->sframe)) + kfree(op->frames); + + if ((op->last_frames) && (op->last_frames != &op->last_sframe)) + kfree(op->last_frames); + + kfree(op); + + return; +} + +/* + * bcm_delete_rx_op - find and remove a rx op (returns number of removed ops) + */ +static int bcm_delete_rx_op(struct list_head *ops, canid_t can_id, int ifindex) +{ + struct bcm_op *op, *n; + + list_for_each_entry_safe(op, n, ops, list) { + if ((op->can_id == can_id) && (op->ifindex == ifindex)) { + DBG("removing rx_op %p for can_id %03X\n", + op, op->can_id); + + /* + * Don't care if we're bound or not (due to netdev + * problems) can_rx_unregister() is always a save + * thing to do here. + */ + if (op->ifindex) { + struct net_device *dev = + dev_get_by_index(op->ifindex); + + if (dev) { + can_rx_unregister(dev, op->can_id, + REGMASK(op->can_id), + bcm_rx_handler, op); + dev_put(dev); + } + + } else + can_rx_unregister(NULL, op->can_id, + REGMASK(op->can_id), + bcm_rx_handler, op); + + list_del(&op->list); + bcm_remove_op(op); + return 1; /* done */ + } + } + + return 0; /* not found */ +} + +/* + * bcm_delete_tx_op - find and remove a tx op (returns number of removed ops) + */ +static int bcm_delete_tx_op(struct list_head *ops, canid_t can_id, int ifindex) +{ + struct bcm_op *op, *n; + + list_for_each_entry_safe(op, n, ops, list) { + if ((op->can_id == can_id) && (op->ifindex == ifindex)) { + DBG("removing rx_op %p for can_id %03X\n", + op, op->can_id); + list_del(&op->list); + bcm_remove_op(op); + return 1; /* done */ + } + } + + return 0; /* not found */ +} + +/* + * bcm_read_op - read out a bcm_op and send it to the user (for bcm_sendmsg) + */ +static int bcm_read_op(struct list_head *ops, struct bcm_msg_head *msg_head, + int ifindex) +{ + struct bcm_op *op = bcm_find_op(ops, msg_head->can_id, ifindex); + + if (!op) { + DBG("TRX_READ: did not find op for can_id %03X\n", + msg_head->can_id); + return -EINVAL; + } + + DBG("TRX_READ: sending status for can_id %03X\n", + msg_head->can_id); + /* put current values into msg_head */ + msg_head->flags = op->flags; + msg_head->count = op->count; + msg_head->ival1 = op->ival1; + msg_head->ival2 = op->ival2; + msg_head->nframes = op->nframes; + + bcm_send_to_user(op, msg_head, op->frames, NULL); + + return MHSIZ; +} + +/* + * bcm_tx_setup - create or update a bcm tx op (for bcm_sendmsg) + */ +static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, + int ifindex, struct sock *sk) +{ + struct bcm_opt *bo = bcm_sk(sk); + struct bcm_op *op; + int i, err; + + /* we need a real device to send frames */ + if (!ifindex) + return -ENODEV; + + /* we need at least one can_frame */ + if (msg_head->nframes < 1) + return -EINVAL; + + /* check the given can_id */ + op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex); + + if (op) { + /* update existing BCM operation */ + + DBG("TX_SETUP: modifying existing tx_op %p for can_id %03X\n", + op, msg_head->can_id); + + /* + * Do we need more space for the can_frames than currently + * allocated? -> This is a _really_ unusual use-case and + * therefore (complexity / locking) it is not supported. + */ + if (msg_head->nframes > op->nframes) + return -E2BIG; + + /* update can_frames content */ + for (i = 0; i < msg_head->nframes; i++) { + err = memcpy_fromiovec((u8*)&op->frames[i], + msg->msg_iov, CFSIZ); + if (err < 0) + return err; + + if (msg_head->flags & TX_CP_CAN_ID) { + /* copy can_id into frame */ + op->frames[i].can_id = msg_head->can_id; + } + } + + } else { + /* insert new BCM operation for the given can_id */ + + op = kzalloc(OPSIZ, GFP_KERNEL); + if (!op) + return -ENOMEM; + + DBG("TX_SETUP: creating new tx_op %p for can_id %03X\n", + op, msg_head->can_id); + + op->can_id = msg_head->can_id; + + /* create array for can_frames and copy the data */ + if (msg_head->nframes > 1) { + op->frames = kmalloc(msg_head->nframes * CFSIZ, + GFP_KERNEL); + if (!op->frames) { + kfree(op); + return -ENOMEM; + } + } else + op->frames = &op->sframe; + + for (i = 0; i < msg_head->nframes; i++) { + err = memcpy_fromiovec((u8*)&op->frames[i], + msg->msg_iov, CFSIZ); + if (err < 0) { + if (op->frames != &op->sframe) + kfree(op->frames); + kfree(op); + return err; + } + + if (msg_head->flags & TX_CP_CAN_ID) { + /* copy can_id into frame */ + op->frames[i].can_id = msg_head->can_id; + } + } + + /* tx_ops never compare with previous received messages */ + op->last_frames = NULL; + + /* bcm_can_tx / bcm_tx_timeout_handler needs this */ + op->sk = sk; + + op->ifindex = ifindex; + + /* initialize uninitialized (kmalloc) structure */ + init_timer(&op->timer); + + /* currently unused in tx_ops */ + init_timer(&op->thrtimer); + + /* handler for tx_ops */ + op->timer.function = bcm_tx_timeout_handler; + + /* timer.data points to this op-structure */ + op->timer.data = (unsigned long)op; + + /* add this bcm_op to the list of the tx_ops */ + list_add(&op->list, &bo->tx_ops); + + } /* if ((op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex))) */ + + if (op->nframes != msg_head->nframes) { + op->nframes = msg_head->nframes; + /* start multiple frame transmission with index 0 */ + op->currframe = 0; + } + + /* check flags */ + + op->flags = msg_head->flags; + + if (op->flags & TX_RESET_MULTI_IDX) { + /* start multiple frame transmission with index 0 */ + op->currframe = 0; + } + + if (op->flags & SETTIMER) { + /* set timer values */ + + op->count = msg_head->count; + op->ival1 = msg_head->ival1; + op->ival2 = msg_head->ival2; + op->j_ival1 = rounded_tv2jif(&msg_head->ival1); + op->j_ival2 = rounded_tv2jif(&msg_head->ival2); + + DBG("TX_SETUP: SETTIMER count=%d j_ival1=%ld j_ival2=%ld\n", + op->count, op->j_ival1, op->j_ival2); + + /* disable an active timer due to zero values? */ + if (!op->j_ival1 && !op->j_ival2) { + del_timer(&op->timer); + DBG("TX_SETUP: SETTIMER disabled timer.\n"); + } + } + + if ((op->flags & STARTTIMER) && + ((op->j_ival1 && op->count) || op->j_ival2)) { + + del_timer(&op->timer); + + /* spec: send can_frame when starting timer */ + op->flags |= TX_ANNOUNCE; + + if (op->j_ival1 && (op->count > 0)) { + op->timer.expires = jiffies + op->j_ival1; + /* op->count-- is done in bcm_tx_timeout_handler */ + DBG("TX_SETUP: adding timer ival1. func=%p data=%p " + "exp=0x%08X\n", + op->timer.function, + (char*) op->timer.data, + (unsigned int) op->timer.expires); + + } else { + op->timer.expires = jiffies + op->j_ival2; + DBG("TX_SETUP: adding timer ival2. func=%p data=%p " + "exp=0x%08X\n", + op->timer.function, + (char*) op->timer.data, + (unsigned int) op->timer.expires); + } + + add_timer(&op->timer); + } + + if (op->flags & TX_ANNOUNCE) + bcm_can_tx(op); + + return msg_head->nframes * CFSIZ + MHSIZ; +} + +/* + * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg) + */ +static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, + int ifindex, struct sock *sk) +{ + struct bcm_opt *bo = bcm_sk(sk); + struct bcm_op *op; + int do_rx_register; + int err; + + if ((msg_head->flags & RX_FILTER_ID) || (!(msg_head->nframes))) { + /* be robust against wrong usage ... */ + msg_head->flags |= RX_FILTER_ID; + msg_head->nframes = 0; /* ignore trailing garbage */ + } + + if ((msg_head->flags & RX_RTR_FRAME) && + ((msg_head->nframes != 1) || + (!(msg_head->can_id & CAN_RTR_FLAG)))) { + + DBG("RX_SETUP: bad RX_RTR_FRAME setup!\n"); + return -EINVAL; + } + + /* check the given can_id */ + op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex); + if (op) { + /* update existing BCM operation */ + + DBG("RX_SETUP: modifying existing rx_op %p for can_id %03X\n", + op, msg_head->can_id); + + /* + * Do we need more space for the can_frames than currently + * allocated? -> This is a _really_ unusual use-case and + * therefore (complexity / locking) it is not supported. + */ + if (msg_head->nframes > op->nframes) + return -E2BIG; + + if (msg_head->nframes) { + /* update can_frames content */ + err = memcpy_fromiovec((u8*)op->frames, + msg->msg_iov, + msg_head->nframes * CFSIZ); + if (err < 0) + return err; + + /* clear last_frames to indicate 'nothing received' */ + memset(op->last_frames, 0, msg_head->nframes * CFSIZ); + } + + op->nframes = msg_head->nframes; + + /* Only an update -> do not call can_rx_register() */ + do_rx_register = 0; + + } else { + /* insert new BCM operation for the given can_id */ + + op = kzalloc(OPSIZ, GFP_KERNEL); + if (!op) + return -ENOMEM; + + DBG("RX_SETUP: creating new rx_op %p for can_id %03X\n", + op, msg_head->can_id); + + op->can_id = msg_head->can_id; + op->nframes = msg_head->nframes; + + if (msg_head->nframes > 1) { + /* create array for can_frames and copy the data */ + op->frames = kmalloc(msg_head->nframes * CFSIZ, + GFP_KERNEL); + if (!op->frames) { + kfree(op); + return -ENOMEM; + } + + /* create and init array for received can_frames */ + op->last_frames = kzalloc(msg_head->nframes * CFSIZ, + GFP_KERNEL); + if (!op->last_frames) { + kfree(op->frames); + kfree(op); + return -ENOMEM; + } + + } else { + op->frames = &op->sframe; + op->last_frames = &op->last_sframe; + } + + if (msg_head->nframes) { + err = memcpy_fromiovec((u8*)op->frames, msg->msg_iov, + msg_head->nframes * CFSIZ); + if (err < 0) { + if (op->frames != &op->sframe) + kfree(op->frames); + if (op->last_frames != &op->last_sframe) + kfree(op->last_frames); + kfree(op); + return err; + } + } + + op->sk = sk; + op->ifindex = ifindex; + + /* initialize uninitialized (kzalloc) structure */ + init_timer(&op->timer); + + /* init throttle timer for RX_CHANGED */ + init_timer(&op->thrtimer); + + /* handler for rx timeouts */ + op->timer.function = bcm_rx_timeout_handler; + + /* timer.data points to this op-structure */ + op->timer.data = (unsigned long)op; + + /* handler for RX_CHANGED throttle timeouts */ + op->thrtimer.function = bcm_rx_thr_handler; + + /* timer.data points to this op-structure */ + op->thrtimer.data = (unsigned long)op; + + /* mark disabled timer */ + op->thrtimer.expires = 0; + + /* add this bcm_op to the list of the tx_ops */ + list_add(&op->list, &bo->rx_ops); + + /* call can_rx_register() */ + do_rx_register = 1; + + } /* if ((op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex))) */ + + /* check flags */ + op->flags = msg_head->flags; + + if (op->flags & RX_RTR_FRAME) { + + /* no timers in RTR-mode */ + del_timer(&op->thrtimer); + del_timer(&op->timer); + + /* + * funny feature in RX(!)_SETUP only for RTR-mode: + * copy can_id into frame BUT without RTR-flag to + * prevent a full-load-loopback-test ... ;-] + */ + if ((op->flags & TX_CP_CAN_ID) || + (op->frames[0].can_id == op->can_id)) + op->frames[0].can_id = op->can_id & ~CAN_RTR_FLAG; + + } else { + if (op->flags & SETTIMER) { + + /* set timer value */ + op->ival1 = msg_head->ival1; + op->ival2 = msg_head->ival2; + op->j_ival1 = rounded_tv2jif(&msg_head->ival1); + op->j_ival2 = rounded_tv2jif(&msg_head->ival2); + + DBG("RX_SETUP: SETTIMER j_ival1=%ld j_ival2=%ld\n", + op->j_ival1, op->j_ival2); + + /* disable an active timer due to zero value? */ + if (!op->j_ival1) { + del_timer(&op->timer); + DBG("RX_SETUP: disabled timer rx timeouts.\n"); + } + + /* free currently blocked msgs ? */ + if (op->thrtimer.expires) { + DBG("RX_SETUP: unblocking throttled msgs.\n"); + del_timer(&op->thrtimer); + /* send blocked msgs hereafter */ + op->thrtimer.expires = jiffies + 2; + add_timer(&op->thrtimer); + } + /* + * if (op->j_ival2) is zero, no (new) throttling + * will happen. For details see functions + * bcm_rx_update_and_send() and bcm_rx_thr_handler() + */ + } + + if ((op->flags & STARTTIMER) && op->j_ival1) { + + del_timer(&op->timer); + op->timer.expires = jiffies + op->j_ival1; + + DBG("RX_SETUP: adding timer ival1. func=%p data=%p" + " exp=0x%08X\n", + (char *) op->timer.function, + (char *) op->timer.data, + (unsigned int) op->timer.expires); + + add_timer(&op->timer); + } + } + + /* now we can register for can_ids, if we added a new bcm_op */ + if (do_rx_register) { + DBG("RX_SETUP: can_rx_register() for can_id %03X. " + "rx_op is %p\n", op->can_id, op); + + if (ifindex) { + struct net_device *dev = dev_get_by_index(ifindex); + + if (dev) { + can_rx_register(dev, op->can_id, + REGMASK(op->can_id), + bcm_rx_handler, op, IDENT); + dev_put(dev); + } + + } else + can_rx_register(NULL, op->can_id, REGMASK(op->can_id), + bcm_rx_handler, op, IDENT); + } + + return msg_head->nframes * CFSIZ + MHSIZ; +} + +/* + * bcm_tx_send - send a single CAN frame to the CAN interface (for bcm_sendmsg) + */ +static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) +{ + struct sk_buff *skb; + struct net_device *dev; + int err; + + /* just copy and send one can_frame */ + + if (!ifindex) /* we need a real device to send frames */ + return -ENODEV; + + skb = alloc_skb(CFSIZ, GFP_KERNEL); + + if (!skb) + return -ENOMEM; + + err = memcpy_fromiovec(skb_put(skb, CFSIZ), msg->msg_iov, CFSIZ); + if (err < 0) { + kfree_skb(skb); + return err; + } + + DBG_FRAME("BCM: TX_SEND: sending frame", + (struct can_frame *)skb->data); + + dev = dev_get_by_index(ifindex); + if (!dev) { + kfree_skb(skb); + return -ENODEV; + } + + skb->dev = dev; + skb->sk = sk; + can_send(skb, 1); /* send with loopback */ + dev_put(dev); + + return CFSIZ + MHSIZ; +} + +/* + * bcm_sendmsg - process BCM commands (opcodes) from the userspace + */ +static int bcm_sendmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *msg, size_t size) +{ + struct sock *sk = sock->sk; + struct bcm_opt *bo = bcm_sk(sk); + int ifindex = bo->ifindex; /* default ifindex for this bcm_op */ + struct bcm_msg_head msg_head; + int ret; /* read bytes or error codes as return value */ + + if (!bo->bound) { + DBG("sock %p not bound\n", sk); + return -ENOTCONN; + } + + /* check for alternative ifindex for this bcm_op */ + + if (!ifindex && msg->msg_name) { + /* no bound device as default => check msg_name */ + struct sockaddr_can *addr = + (struct sockaddr_can *)msg->msg_name; + + if (addr->can_family != AF_CAN) + return -EINVAL; + + ifindex = addr->can_ifindex; /* ifindex from sendto() */ + + if (ifindex && !dev_get_by_index(ifindex)) { + DBG("device %d not found\n", ifindex); + return -ENODEV; + } + } + + /* read message head information */ + + ret = memcpy_fromiovec((u8*)&msg_head, msg->msg_iov, MHSIZ); + if (ret < 0) + return ret; + + DBG("opcode %d for can_id %03X\n", msg_head.opcode, msg_head.can_id); + + lock_sock(sk); + + switch (msg_head.opcode) { + + case TX_SETUP: + ret = bcm_tx_setup(&msg_head, msg, ifindex, sk); + break; + + case RX_SETUP: + ret = bcm_rx_setup(&msg_head, msg, ifindex, sk); + break; + + case TX_DELETE: + if (bcm_delete_tx_op(&bo->tx_ops, msg_head.can_id, ifindex)) + ret = MHSIZ; + else + ret = -EINVAL; + break; + + case RX_DELETE: + if (bcm_delete_rx_op(&bo->rx_ops, msg_head.can_id, ifindex)) + ret = MHSIZ; + else + ret = -EINVAL; + break; + + case TX_READ: + /* reuse msg_head for the reply to TX_READ */ + msg_head.opcode = TX_STATUS; + ret = bcm_read_op(&bo->tx_ops, &msg_head, ifindex); + break; + + case RX_READ: + /* reuse msg_head for the reply to RX_READ */ + msg_head.opcode = RX_STATUS; + ret = bcm_read_op(&bo->rx_ops, &msg_head, ifindex); + break; + + case TX_SEND: + /* we need at least one can_frame */ + if (msg_head.nframes < 1) + ret = -EINVAL; + else + ret = bcm_tx_send(msg, ifindex, sk); + break; + + default: + DBG("Unknown opcode %d\n", msg_head.opcode); + ret = -EINVAL; + break; + } + + release_sock(sk); + + return ret; +} + +/* + * initial settings for all BCM sockets to be set at socket creation time + */ +static int bcm_init(struct sock *sk) +{ + struct bcm_opt *bo = bcm_sk(sk); + + bo->bound = 0; + bo->ifindex = 0; + bo->dropped_usr_msgs = 0; + bo->bcm_proc_read = NULL; + + INIT_LIST_HEAD(&bo->tx_ops); + INIT_LIST_HEAD(&bo->rx_ops); + + return 0; +} + +/* + * notification handler for netdevice status changes + */ +static void bcm_notifier(unsigned long msg, void *data) +{ + struct sock *sk = (struct sock *)data; + struct bcm_opt *bo = bcm_sk(sk); + + DBG("called for sock %p\n", sk); + + switch (msg) { + + case NETDEV_UNREGISTER: + bo->bound = 0; + bo->ifindex = 0; + /* fallthrough */ + case NETDEV_DOWN: + sk->sk_err = ENETDOWN; + if (!sock_flag(sk, SOCK_DEAD)) + sk->sk_error_report(sk); + } +} + +/* + * standard socket functions + */ +static int bcm_release(struct socket *sock) +{ + struct sock *sk = sock->sk; + struct bcm_opt *bo = bcm_sk(sk); + struct bcm_op *op, *next; + + DBG("socket %p, sk %p\n", sock, sk); + + /* remove bcm_ops, timer, rx_unregister(), etc. */ + + list_for_each_entry_safe(op, next, &bo->tx_ops, list) { + DBG("removing tx_op %p for can_id %03X\n", op, op->can_id); + bcm_remove_op(op); + } + + list_for_each_entry_safe(op, next, &bo->rx_ops, list) { + DBG("removing rx_op %p for can_id %03X\n", op, op->can_id); + + /* + * Don't care if we're bound or not (due to netdev problems) + * can_rx_unregister() is always a save thing to do here. + */ + if (op->ifindex) { + struct net_device *dev = dev_get_by_index(op->ifindex); + + if (dev) { + can_rx_unregister(dev, op->can_id, + REGMASK(op->can_id), + bcm_rx_handler, op); + dev_put(dev); + } + + } else + can_rx_unregister(NULL, op->can_id, + REGMASK(op->can_id), + bcm_rx_handler, op); + + bcm_remove_op(op); + } + + /* remove procfs entry */ + if (proc_dir && bo->bcm_proc_read) + remove_proc_entry(bo->procname, proc_dir); + + /* remove device notifier */ + if (bo->ifindex) { + struct net_device *dev = dev_get_by_index(bo->ifindex); + + if (dev) { + can_dev_unregister(dev, bcm_notifier, sk); + dev_put(dev); + } + } + + sock_put(sk); + + return 0; +} + +static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, + int flags) +{ + struct sockaddr_can *addr = (struct sockaddr_can *)uaddr; + struct sock *sk = sock->sk; + struct bcm_opt *bo = bcm_sk(sk); + + if (bo->bound) + return -EISCONN; + + /* bind a device to this socket */ + if (addr->can_ifindex) { + struct net_device *dev = dev_get_by_index(addr->can_ifindex); + + if (!dev) { + DBG("could not find device index %d\n", + addr->can_ifindex); + return -ENODEV; + } + bo->ifindex = dev->ifindex; + can_dev_register(dev, bcm_notifier, sk); /* register notif. */ + dev_put(dev); + + DBG("socket %p bound to device %s (idx %d)\n", + sock, dev->name, dev->ifindex); + + } else { + /* no notifier for ifindex = 0 ('any' CAN device) */ + bo->ifindex = 0; + } + + bo->bound = 1; + + if (proc_dir) { + /* unique socket address as filename */ + sprintf(bo->procname, "%p", sock); + bo->bcm_proc_read = create_proc_read_entry(bo->procname, 0644, + proc_dir, + bcm_read_proc, sk); + } + + return 0; +} + +static int bcm_recvmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *msg, size_t size, int flags) +{ + struct sock *sk = sock->sk; + struct sk_buff *skb; + int error = 0; + int noblock; + int err; + + DBG("socket %p, sk %p\n", sock, sk); + + noblock = flags & MSG_DONTWAIT; + flags &= ~MSG_DONTWAIT; + skb = skb_recv_datagram(sk, flags, noblock, &error); + if (!skb) + return error; + + DBG("delivering skbuff %p\n", skb); + DBG_SKB(skb); + + if (skb->len < size) + size = skb->len; + + err = memcpy_toiovec(msg->msg_iov, skb->data, size); + if (err < 0) { + skb_free_datagram(sk, skb); + return err; + } + + sock_recv_timestamp(msg, sk, skb); + + if (msg->msg_name) { + msg->msg_namelen = sizeof(struct sockaddr_can); + memcpy(msg->msg_name, skb->cb, msg->msg_namelen); + } + + DBG("freeing sock %p, skbuff %p\n", sk, skb); + skb_free_datagram(sk, skb); + + return size; +} + +static unsigned int bcm_poll(struct file *file, struct socket *sock, + poll_table *wait) +{ + unsigned int mask = 0; + + DBG("socket %p\n", sock); + + mask = datagram_poll(file, sock, wait); + return mask; +} + +static struct proto_ops bcm_ops = { + .family = PF_CAN, + .release = bcm_release, + .bind = sock_no_bind, + .connect = bcm_connect, + .socketpair = sock_no_socketpair, + .accept = sock_no_accept, + .getname = sock_no_getname, + .poll = bcm_poll, + .ioctl = NULL, /* use can_ioctl() from af_can.c */ + .listen = sock_no_listen, + .shutdown = sock_no_shutdown, + .setsockopt = sock_no_setsockopt, + .getsockopt = sock_no_getsockopt, + .sendmsg = bcm_sendmsg, + .recvmsg = bcm_recvmsg, + .mmap = sock_no_mmap, + .sendpage = sock_no_sendpage, +}; + +static struct proto bcm_proto = { + .name = "CAN_BCM", + .owner = THIS_MODULE, + .obj_size = sizeof(struct bcm_sock), + .init = bcm_init, +}; + +static struct can_proto bcm_can_proto = { + .type = SOCK_DGRAM, + .protocol = CAN_BCM, + .capability = BCM_CAP, + .ops = &bcm_ops, + .prot = &bcm_proto, +}; + +static int __init bcm_module_init(void) +{ + printk(banner); + + can_proto_register(&bcm_can_proto); + + /* create /proc/net/can/bcm directory */ + proc_dir = proc_mkdir(CAN_PROC_DIR"/"IDENT, NULL); + + if (proc_dir) + proc_dir->owner = THIS_MODULE; + + return 0; +} + +static void __exit bcm_module_exit(void) +{ + can_proto_unregister(&bcm_can_proto); + + if (proc_dir) + remove_proc_entry(CAN_PROC_DIR"/"IDENT, NULL); +} + +module_init(bcm_module_init); +module_exit(bcm_module_exit); -- - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html