| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070601150633.2C3B.MOKUNO@sm.sony.co.jp>
Date: Fri, 01 Jun 2007 15:07:36 +0900
From: MOKUNO Masakazu <mokuno@...sony.co.jp>
To: netdev@...r.kernel.org
Cc: Geoff Levand <geoffrey.levand@...sony.com>,
Geert Uytterhoeven <Geert.Uytterhoeven@...ycom.com>
Subject: [PATCH 1/2] ps3: gigabit ethernet driver
Add gigabit ethernet support for PS3.
Signed-off-by: Masakazu Mokuno <mokuno@...sony.co.jp>
---
drivers/net/Kconfig | 10
drivers/net/Makefile | 1
drivers/net/gelic_net.c | 1579 ++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/gelic_net.h | 233 +++++++
4 files changed, 1823 insertions(+)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2264,6 +2264,16 @@ config TSI108_ETH
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
+config GELIC_NET
+ tristate "PS3 Gigabit Ethernet driver"
+ depends on PPC_PS3
+ help
+ This driver supports the Gigabit Ethernet device on the
+ PS3 game console.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gelic_net.
+
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx || PPC_86xx
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
+obj-$(CONFIG_GELIC_NET) += gelic_net.o
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SKGE) += skge.o
obj-$(CONFIG_SKY2) += sky2.o
--- /dev/null
+++ b/drivers/net/gelic_net.c
@@ -0,0 +1,1579 @@
+/*
+ * PS3 Platfom gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corporation
+ *
+ * this file is based on: spider_net.c
+ *
+ * Network device driver for Cell Processor-Based Blade
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@...ibm.com>
+ * Jens Osterkamp <Jens.Osterkamp@...ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#undef DEBUG
+#undef GELIC_RING_CHAIN
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+#include <linux/dma-mapping.h>
+#include <net/checksum.h>
+#include <asm/firmware.h>
+#include <asm/ps3.h>
+#include <asm/lv1call.h>
+
+#include "gelic_net.h"
+
+#define GELIC_NET_DRV_NAME "Gelic Network Driver"
+#define GELIC_NET_DRV_VERSION "1.0"
+
+MODULE_AUTHOR("SCE Inc.");
+MODULE_DESCRIPTION("Gelic Network driver");
+MODULE_LICENSE("GPL");
+
+static inline struct device * ctodev(struct gelic_net_card * card)
+{
+ return &card->dev->core;
+}
+static inline unsigned int bus_id(struct gelic_net_card *card)
+{
+ return card->dev->did.bus_id;
+}
+static inline unsigned int dev_id(struct gelic_net_card *card)
+{
+ return card->dev->did.dev_id;
+}
+
+/* set irq_mask */
+static int gelic_net_set_irq_mask(struct gelic_net_card *card, u64 mask)
+{
+ int status;
+
+ status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
+ mask, 0);
+ if (status)
+ dev_info(ctodev(card),
+ "lv1_net_set_interrupt_mask failed %d\n", status);
+ return status;
+}
+static inline void gelic_net_rx_irq_on(struct gelic_net_card *card)
+{
+ gelic_net_set_irq_mask(card, card->ghiintmask | GELIC_NET_RXINT);
+}
+static inline void gelic_net_rx_irq_off(struct gelic_net_card *card)
+{
+ gelic_net_set_irq_mask(card, card->ghiintmask & ~GELIC_NET_RXINT);
+}
+/**
+ * gelic_net_get_descr_status -- returns the status of a descriptor
+ * @descr: descriptor to look at
+ *
+ * returns the status as in the dmac_cmd_status field of the descriptor
+ */
+static enum gelic_net_descr_status
+gelic_net_get_descr_status(struct gelic_net_descr *descr)
+{
+ u32 cmd_status;
+
+ cmd_status = descr->dmac_cmd_status;
+ cmd_status >>= GELIC_NET_DESCR_IND_PROC_SHIFT;
+ return cmd_status;
+}
+
+/**
+ * gelic_net_set_descr_status -- sets the status of a descriptor
+ * @descr: descriptor to change
+ * @status: status to set in the descriptor
+ *
+ * changes the status to the specified value. Doesn't change other bits
+ * in the status
+ */
+static void gelic_net_set_descr_status(struct gelic_net_descr *descr,
+ enum gelic_net_descr_status status)
+{
+ u32 cmd_status;
+
+ /* read the status */
+ cmd_status = descr->dmac_cmd_status;
+ /* clean the upper 4 bits */
+ cmd_status &= GELIC_NET_DESCR_IND_PROC_MASKO;
+ /* add the status to it */
+ cmd_status |= ((u32)status) << GELIC_NET_DESCR_IND_PROC_SHIFT;
+ /* and write it back */
+ descr->dmac_cmd_status = cmd_status;
+ wmb();
+}
+
+/**
+ * gelic_net_free_chain - free descriptor chain
+ * @card: card structure
+ * @descr_in: address of desc
+ */
+static void gelic_net_free_chain(struct gelic_net_card *card,
+ struct gelic_net_descr *descr_in)
+{
+ struct gelic_net_descr *descr;
+
+ for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
+ dma_unmap_single(ctodev(card), descr->bus_addr,
+ GELIC_NET_DESCR_SIZE, DMA_BIDIRECTIONAL);
+ descr->bus_addr = 0;
+ }
+}
+
+/**
+ * gelic_net_init_chain - links descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ * @start_descr: address of descriptor array
+ * @no: number of descriptors
+ *
+ * we manage a circular list that mirrors the hardware structure,
+ * except that the hardware uses bus addresses.
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_init_chain(struct gelic_net_card *card,
+ struct gelic_net_descr_chain *chain,
+ struct gelic_net_descr *start_descr, int no)
+{
+ int i;
+ struct gelic_net_descr *descr;
+
+ descr = start_descr;
+ memset(descr, 0, sizeof(*descr) * no);
+
+ /* set up the hardware pointers in each descriptor */
+ for (i = 0; i < no; i++, descr++) {
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+ descr->bus_addr =
+ dma_map_single(ctodev(card), descr,
+ GELIC_NET_DESCR_SIZE,
+ DMA_BIDIRECTIONAL);
+
+ if (!descr->bus_addr)
+ goto iommu_error;
+
+ descr->next = descr + 1;
+ descr->prev = descr - 1;
+ }
+ /* make them as ring */
+ (descr - 1)->next = start_descr;
+ start_descr->prev = (descr - 1);
+
+ /* chain bus addr of hw descriptor */
+ descr = start_descr;
+ for (i = 0; i < no; i++, descr++) {
+ descr->next_descr_addr = descr->next->bus_addr;
+ }
+
+ chain->head = start_descr;
+ chain->tail = start_descr;
+
+
+#ifdef GELIC_RING_CHAIN
+ (descr - 1)->next_descr_addr = start_descr->bus_addr;
+#else
+ /* do not chain last hw descriptor */
+ (descr - 1)->next_descr_addr = 0;
+#endif
+ return 0;
+
+iommu_error:
+ for (i--, descr--; 0 <= i; i--, descr--)
+ if (descr->bus_addr)
+ dma_unmap_single(ctodev(card), descr->bus_addr,
+ GELIC_NET_DESCR_SIZE,
+ DMA_BIDIRECTIONAL);
+ return -ENOMEM;
+}
+
+/**
+ * gelic_net_prepare_rx_descr - reinitializes a rx descriptor
+ * @card: card structure
+ * @descr: descriptor to re-init
+ *
+ * return 0 on succes, <0 on failure
+ *
+ * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
+ * Activate the descriptor state-wise
+ */
+static int gelic_net_prepare_rx_descr(struct gelic_net_card *card,
+ struct gelic_net_descr *descr)
+{
+ int offset;
+ unsigned int bufsize;
+
+ if (gelic_net_get_descr_status(descr) != GELIC_NET_DESCR_NOT_IN_USE) {
+ dev_info(ctodev(card), "%s: ERROR status \n", __func__);
+ }
+ /* we need to round up the buffer size to a multiple of 128 */
+ bufsize = (GELIC_NET_MAX_MTU + GELIC_NET_RXBUF_ALIGN - 1) &
+ (~(GELIC_NET_RXBUF_ALIGN - 1));
+
+ /* and we need to have it 128 byte aligned, therefore we allocate a
+ * bit more */
+ descr->skb = netdev_alloc_skb(card->netdev,
+ bufsize + GELIC_NET_RXBUF_ALIGN - 1);
+ if (!descr->skb) {
+ descr->buf_addr = 0; /* tell DMAC don't touch memory */
+ dev_info(ctodev(card),
+ "%s:allocate skb failed !!\n", __func__);
+ return -ENOMEM;
+ }
+ descr->buf_size = bufsize;
+ descr->dmac_cmd_status = 0;
+ descr->result_size = 0;
+ descr->valid_size = 0;
+ descr->data_error = 0;
+
+ offset = ((unsigned long)descr->skb->data) &
+ (GELIC_NET_RXBUF_ALIGN - 1);
+ if (offset)
+ skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
+ /* io-mmu-map the skb */
+ descr->buf_addr = dma_map_single(ctodev(card), descr->skb->data,
+ GELIC_NET_MAX_MTU,
+ DMA_BIDIRECTIONAL);
+ wmb();
+ if (!descr->buf_addr) {
+ dev_kfree_skb_any(descr->skb);
+ descr->skb = NULL;
+ dev_info(ctodev(card),
+ "%s:Could not iommu-map rx buffer\n", __func__);
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+ return -ENOMEM;
+ } else {
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_CARDOWNED);
+ return 0;
+ }
+}
+
+/**
+ * gelic_net_release_rx_chain - free all skb of rx descr
+ * @card: card structure
+ *
+ */
+static void gelic_net_release_rx_chain(struct gelic_net_card *card)
+{
+ struct gelic_net_descr * descr = card->rx_chain.head;
+
+ do {
+ if (descr->skb) {
+ dma_unmap_single(ctodev(card),
+ descr->buf_addr,
+ descr->skb->len,
+ DMA_BIDIRECTIONAL);
+ descr->buf_addr = 0;
+ dev_kfree_skb_any(descr->skb);
+ descr->skb = NULL;
+ descr->dmac_cmd_status = GELIC_NET_DESCR_NOT_IN_USE;
+ }
+ descr = descr->next;
+ } while (descr != card->rx_chain.head);
+}
+
+/**
+ * gelic_net_fill_rx_chain - fills descriptors/skbs in the rx chains
+ * @card: card structure
+ *
+ * fills all descriptors in the rx chain: allocates skbs
+ * and iommu-maps them.
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_fill_rx_chain(struct gelic_net_card *card)
+{
+ struct gelic_net_descr *descr = card->rx_chain.head;
+ int ret;
+
+ do {
+ if (!descr->skb)
+ if ((ret = gelic_net_prepare_rx_descr(card, descr)))
+ goto rewind;
+ descr = descr->next;
+ } while (descr != card->rx_chain.head);
+
+ return 0;
+rewind:
+ gelic_net_release_rx_chain(card);
+ return ret;
+}
+
+/**
+ * gelic_net_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
+ * @card: card structure
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_alloc_rx_skbs(struct gelic_net_card *card)
+{
+ struct gelic_net_descr_chain *chain;
+ int ret;
+ chain = &card->rx_chain;
+ ret = gelic_net_fill_rx_chain(card);
+ chain->head = card->rx_top->prev; /* point to the last */
+ return ret;
+}
+
+/**
+ * gelic_net_release_tx_descr - processes a used tx descriptor
+ * @card: card structure
+ * @descr: descriptor to release
+ *
+ * releases a used tx descriptor (unmapping, freeing of skb)
+ */
+static void gelic_net_release_tx_descr(struct gelic_net_card *card,
+ struct gelic_net_descr *descr)
+{
+ struct sk_buff *skb;
+
+
+ if (descr->data_status & (1 << GELIC_NET_TXDESC_TAIL)) {
+ /* 2nd descriptor */
+ skb = descr->skb;
+ dma_unmap_single(ctodev(card), descr->buf_addr, skb->len,
+ DMA_BIDIRECTIONAL);
+ dev_kfree_skb_any(skb);
+ } else {
+ dma_unmap_single(ctodev(card), descr->buf_addr,
+ descr->buf_size, DMA_BIDIRECTIONAL);
+ }
+
+ descr->buf_addr = 0;
+ descr->buf_size = 0;
+ descr->next_descr_addr = 0;
+ descr->result_size = 0;
+ descr->valid_size = 0;
+ descr->data_status = 0;
+ descr->data_error = 0;
+ descr->skb = NULL;
+
+ /* set descr status */
+ descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOT_IN_USE;
+}
+
+/**
+ * gelic_net_release_tx_chain - processes sent tx descriptors
+ * @card: adapter structure
+ * @stop: net_stop sequence
+ *
+ * releases the tx descriptors that gelic has finished with
+ */
+static void gelic_net_release_tx_chain(struct gelic_net_card *card, int stop)
+{
+ struct gelic_net_descr_chain *tx_chain;
+ enum gelic_net_descr_status status;
+ int release = 0;
+
+ for (tx_chain = &card->tx_chain;
+ tx_chain->head != tx_chain->tail && tx_chain->tail;
+ tx_chain->tail = tx_chain->tail->next) {
+ status = gelic_net_get_descr_status(tx_chain->tail);
+ switch (status) {
+ case GELIC_NET_DESCR_RESPONSE_ERROR:
+ case GELIC_NET_DESCR_PROTECTION_ERROR:
+ case GELIC_NET_DESCR_FORCE_END:
+ if (printk_ratelimit())
+ dev_info(ctodev(card),
+ "%s: forcing end of tx descriptor " \
+ "with status %x\n",
+ __func__, status);
+ card->netdev_stats.tx_dropped++;
+ break;
+
+ case GELIC_NET_DESCR_COMPLETE:
+ card->netdev_stats.tx_packets++;
+ card->netdev_stats.tx_bytes +=
+ tx_chain->tail->skb->len;
+ break;
+
+ case GELIC_NET_DESCR_CARDOWNED:
+ /* pending tx request */
+ default:
+ /* any other value (== GELIC_NET_DESCR_NOT_IN_USE) */
+ goto out;
+ }
+ gelic_net_release_tx_descr(card, tx_chain->tail);
+ release = 1;
+ }
+out:
+ if (!stop && release && netif_queue_stopped(card->netdev))
+ netif_wake_queue(card->netdev);
+}
+
+/**
+ * gelic_net_set_multi - sets multicast addresses and promisc flags
+ * @netdev: interface device structure
+ *
+ * gelic_net_set_multi configures multicast addresses as needed for the
+ * netdev interface. It also sets up multicast, allmulti and promisc
+ * flags appropriately
+ */
+static void gelic_net_set_multi(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ struct dev_mc_list *mc;
+ unsigned int i;
+ uint8_t *p;
+ u64 addr;
+ int status;
+
+ /* clear all multicast address */
+ status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
+ 0, 1);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_remove_multicast_address failed %d\n",
+ status);
+ /* set broadcast address */
+ status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
+ GELIC_NET_BROADCAST_ADDR, 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_add_multicast_address failed, %d\n",
+ status);
+
+ if (netdev->flags & IFF_ALLMULTI
+ || netdev->mc_count > GELIC_NET_MC_COUNT_MAX) { /* list max */
+ status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
+ 0, 1);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_add_multicast_address failed, %d\n",
+ status);
+ return;
+ }
+
+ /* set multicast address */
+ for (mc = netdev->mc_list; mc; mc = mc->next) {
+ addr = 0;
+ p = mc->dmi_addr;
+ for (i = 0; i < ETH_ALEN; i++) {
+ addr <<= 8;
+ addr |= *p++;
+ }
+ status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
+ addr, 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_add_multicast_address failed, %d\n",
+ status);
+ }
+}
+
+/**
+ * gelic_net_enable_rxdmac - enables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
+ * in the GDADMACCNTR register
+ */
+static void gelic_net_enable_rxdmac(struct gelic_net_card *card)
+{
+ int status;
+
+ status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
+ card->rx_chain.tail->bus_addr, 0);
+ if (status)
+ printk("lv1_net_start_rx_dma failed, status=%d\n", status);
+}
+
+/**
+ * gelic_net_disable_rxdmac - disables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_net_disable_rxdmac terminates processing on the DMA controller by
+ * turing off DMA and issueing a force end
+ */
+static void gelic_net_disable_rxdmac(struct gelic_net_card *card)
+{
+ int status;
+
+ /* this hvc blocks until the DMA in progress really stopped */
+ status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_stop_rx_dma faild, %d\n", status);
+}
+
+/**
+ * gelic_net_disable_txdmac - disables the transmit DMA controller
+ * @card: card structure
+ *
+ * gelic_net_disable_txdmac terminates processing on the DMA controller by
+ * turing off DMA and issueing a force end
+ */
+static void gelic_net_disable_txdmac(struct gelic_net_card *card)
+{
+ int status;
+
+ /* this hvc blocks until the DMA in progress really stopped */
+ status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0);
+ if (status)
+ dev_err(ctodev(card),
+ "lv1_net_stop_tx_dma faild, status=%d\n", status);
+}
+
+/**
+ * gelic_net_stop - called upon ifconfig down
+ * @netdev: interface device structure
+ *
+ * always returns 0
+ */
+static int gelic_net_stop(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ netif_poll_disable(netdev);
+ netif_stop_queue(netdev);
+
+ /* turn off DMA, force end */
+ gelic_net_disable_rxdmac(card);
+ gelic_net_disable_txdmac(card);
+
+ gelic_net_set_irq_mask(card, 0);
+
+ /* disconnect event port */
+ free_irq(card->netdev->irq, card->netdev);
+ ps3_sb_event_receive_port_destroy(&card->dev->did,
+ card->dev->interrupt_id, card->netdev->irq);
+ card->netdev->irq = NO_IRQ;
+
+ netif_carrier_off(netdev);
+
+ /* release chains */
+ gelic_net_release_tx_chain(card, 1);
+ gelic_net_release_rx_chain(card);
+
+ gelic_net_free_chain(card, card->tx_top);
+ gelic_net_free_chain(card, card->rx_top);
+
+ return 0;
+}
+
+/**
+ * gelic_net_get_next_tx_descr - returns the next available tx descriptor
+ * @card: device structure to get descriptor from
+ *
+ * returns the address of the next descriptor, or NULL if not available.
+ */
+static struct gelic_net_descr *
+gelic_net_get_next_tx_descr(struct gelic_net_card *card)
+{
+ if (!card->tx_chain.head)
+ return NULL;
+ /* see if we can two consecutive free descrs */
+ if (card->tx_chain.tail != card->tx_chain.head->next &&
+ gelic_net_get_descr_status(card->tx_chain.head) ==
+ GELIC_NET_DESCR_NOT_IN_USE &&
+ card->tx_chain.tail != card->tx_chain.head->next->next &&
+ gelic_net_get_descr_status(card->tx_chain.head->next) ==
+ GELIC_NET_DESCR_NOT_IN_USE )
+ return card->tx_chain.head;
+ else
+ return NULL;
+
+}
+
+/**
+ * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
+ * @descr: descriptor structure to fill out
+ * @skb: packet to consider
+ * @middle: middle of frame
+ *
+ * fills out the command and status field of the descriptor structure,
+ * depending on hardware checksum settings. This function assumes a wmb()
+ * has executed before.
+ */
+static void gelic_net_set_txdescr_cmdstat(struct gelic_net_descr *descr,
+ struct sk_buff *skb, int middle)
+{
+ u32 eofr;
+
+ if (middle)
+ eofr = 0;
+ else
+ eofr = GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOCS | eofr;
+ else {
+ /* is packet ip?
+ * if yes: tcp? udp? */
+ if (skb->protocol == htons(ETH_P_IP)) {
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_TCPCS | eofr;
+ else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
+ descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_UDPCS | eofr;
+ else /*
+ * the stack should checksum non-tcp and non-udp
+ * packets on his own: NETIF_F_IP_CSUM
+ */
+ descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOCS | eofr;
+ }
+ }
+}
+
+/**
+ * gelic_net_prepare_tx_descr_v - get dma address of skb_data
+ * @card: card structure
+ * @descr: descriptor structure
+ * @skb: packet to use
+ *
+ * returns 0 on success, <0 on failure.
+ *
+ */
+static int gelic_net_prepare_tx_descr_v(struct gelic_net_card *card,
+ struct gelic_net_descr *descr,
+ struct sk_buff *skb)
+{
+ dma_addr_t buf[2];
+ unsigned int vlan_len;
+
+ if (skb->len < GELIC_NET_VLAN_POS)
+ return -EINVAL;
+
+ memcpy(&descr->vlan, skb->data, GELIC_NET_VLAN_POS);
+ if (card->vlan_index != -1) {
+ descr->vlan.h_vlan_proto = htons(ETH_P_8021Q); /* vlan 0x8100*/
+ descr->vlan.h_vlan_TCI = htons(card->vlan_id[card->vlan_index]);
+ vlan_len = GELIC_NET_VLAN_POS + VLAN_HLEN; /* VLAN_HLEN=4 */
+ } else
+ vlan_len = GELIC_NET_VLAN_POS; /* no vlan tag */
+
+ /* first descr */
+ buf[0] = dma_map_single(ctodev(card), &descr->vlan,
+ vlan_len, DMA_BIDIRECTIONAL);
+
+ if (!buf[0]) {
+ dev_err(ctodev(card),
+ "dma map 1 failed (%p, %i). Dropping packet\n",
+ skb->data, vlan_len);
+ return -ENOMEM;
+ }
+
+ descr->buf_addr = buf[0];
+ descr->buf_size = vlan_len;
+ descr->skb = skb; /* not used */
+ descr->data_status = 0;
+ gelic_net_set_txdescr_cmdstat(descr, skb, 1); /* not the frame end */
+
+ /* second descr */
+ card->tx_chain.head = card->tx_chain.head->next;
+ descr->next_descr_addr = descr->next->bus_addr;
+ descr = descr->next;
+ if (gelic_net_get_descr_status(descr) != GELIC_NET_DESCR_NOT_IN_USE)
+ dev_err(ctodev(card),"descr is not free!\n"); /* XXX will be removed */
+
+ buf[1] = dma_map_single(ctodev(card), skb->data + GELIC_NET_VLAN_POS,
+ skb->len - GELIC_NET_VLAN_POS,
+ DMA_BIDIRECTIONAL);
+
+ if (!buf[1]) {
+ dev_err(ctodev(card),
+ "dma map 2 failed (%p, %i). Dropping packet\n",
+ skb->data + GELIC_NET_VLAN_POS,
+ skb->len - GELIC_NET_VLAN_POS);
+ dma_unmap_single(ctodev(card), buf[0], vlan_len,
+ DMA_BIDIRECTIONAL);
+ return -ENOMEM;
+ }
+
+ descr->buf_addr = buf[1];
+ descr->buf_size = skb->len - GELIC_NET_VLAN_POS;
+ descr->skb = skb;
+ descr->data_status = 0;
+ descr->next_descr_addr= 0; /* terminate hw descr */
+ gelic_net_set_txdescr_cmdstat(descr,skb, 0);
+
+ return 0;
+}
+
+/**
+ * gelic_net_kick_txdma - enables TX DMA processing
+ * @card: card structure
+ * @descr: descriptor address to enable TX processing at
+ *
+ */
+static int gelic_net_kick_txdma(struct gelic_net_card *card,
+ struct gelic_net_descr *descr)
+{
+ int status = -ENXIO;
+ int count = 10;
+
+ if (card->tx_dma_progress)
+ return 0;
+
+ if (gelic_net_get_descr_status(descr) == GELIC_NET_DESCR_CARDOWNED) {
+ card->tx_dma_progress = 1;
+ /* sometimes we need retry here */
+ while (count--) {
+ status = lv1_net_start_tx_dma(bus_id(card),
+ dev_id(card),
+ descr->bus_addr, 0);
+ if (!status)
+ break;
+ }
+ if (!count)
+ dev_info(ctodev(card), "lv1_net_start_txdma failed," \
+ "status=%d %#lx\n",
+ status, card->irq_status);
+ }
+ return status;
+}
+
+/**
+ * gelic_net_xmit - transmits a frame over the device
+ * @skb: packet to send out
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ struct gelic_net_descr *descr = NULL;
+ int result;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->tx_dma_lock, flags);
+
+ gelic_net_release_tx_chain(card, 0);
+ if (!skb)
+ goto kick;
+ descr = gelic_net_get_next_tx_descr(card);
+ if (!descr) {
+ netif_stop_queue(netdev);
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+ result = gelic_net_prepare_tx_descr_v(card, descr, skb);
+
+ if (result)
+ goto error;
+
+ card->tx_chain.head = card->tx_chain.head->next;
+
+ if (descr->prev)
+ descr->prev->next_descr_addr = descr->bus_addr;
+kick:
+ wmb();
+ if (gelic_net_kick_txdma(card, card->tx_chain.tail))
+ goto error;
+
+ netdev->trans_start = jiffies;
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ return NETDEV_TX_OK;
+
+error:
+ card->netdev_stats.tx_dropped++;
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ return NETDEV_TX_LOCKED;
+}
+
+/**
+ * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
+ * @descr: descriptor to process
+ * @card: card structure
+ *
+ * iommu-unmaps the skb, fills out skb structure and passes the data to the
+ * stack. The descriptor state is not changed.
+ */
+static void gelic_net_pass_skb_up(struct gelic_net_descr *descr,
+ struct gelic_net_card *card)
+{
+ struct sk_buff *skb;
+ struct net_device *netdev;
+ u32 data_status, data_error;
+
+ data_status = descr->data_status;
+ data_error = descr->data_error;
+ netdev = card->netdev;
+ /* unmap skb buffer */
+ skb = descr->skb;
+ dma_unmap_single(ctodev(card), descr->buf_addr, GELIC_NET_MAX_MTU,
+ DMA_BIDIRECTIONAL);
+
+ skb->dev = netdev;
+ skb_put(skb, descr->valid_size? descr->valid_size : descr->result_size);
+ if (!descr->valid_size)
+ dev_info(ctodev(card), "buffer full %x %x %x\n",
+ descr->result_size, descr->buf_size, descr->dmac_cmd_status);
+
+ descr->skb = NULL;
+ /*
+ * the card put 2 bytes vlan tag in front
+ * of the ethernet frame
+ */
+ skb_pull(skb, 2);
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ /* checksum offload */
+ if (card->rx_csum) {
+ if ((data_status & GELIC_NET_DATA_STATUS_CHK_MASK) &&
+ (!(data_error & GELIC_NET_DATA_ERROR_CHK_MASK)))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* update netdevice statistics */
+ card->netdev_stats.rx_packets++;
+ card->netdev_stats.rx_bytes += skb->len;
+
+ /* pass skb up to stack */
+ netif_receive_skb(skb);
+}
+
+/**
+ * gelic_net_decode_one_descr - processes an rx descriptor
+ * @card: card structure
+ *
+ * returns 1 if a packet has been sent to the stack, otherwise 0
+ *
+ * processes an rx descriptor by iommu-unmapping the data buffer and passing
+ * the packet up to the stack
+ */
+static int gelic_net_decode_one_descr(struct gelic_net_card *card)
+{
+ enum gelic_net_descr_status status;
+ struct gelic_net_descr_chain *chain = &card->rx_chain;
+ struct gelic_net_descr *descr = chain->tail;
+#ifndef GELIC_RING_CHAIN
+ int dmac_chain_ended;
+#endif
+
+ status = gelic_net_get_descr_status(descr);
+#ifndef GELIC_RING_CHAIN
+ /* is this descriptor terminated with next_descr == NULL? */
+ dmac_chain_ended = descr->dmac_cmd_status & GELIC_NET_DMAC_CMDSTAT_RXDCEIS;
+#endif
+
+ if (status == GELIC_NET_DESCR_CARDOWNED) {
+ return 0;
+ }
+ if (status == GELIC_NET_DESCR_NOT_IN_USE) {
+ dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
+ return 0;
+ }
+
+ if ((status == GELIC_NET_DESCR_RESPONSE_ERROR) ||
+ (status == GELIC_NET_DESCR_PROTECTION_ERROR) ||
+ (status == GELIC_NET_DESCR_FORCE_END)) {
+ dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
+ status);
+ card->netdev_stats.rx_dropped++;
+ goto refill;
+ }
+
+ if ((status != GELIC_NET_DESCR_COMPLETE) &&
+ (status != GELIC_NET_DESCR_FRAME_END)) {
+ dev_dbg(ctodev(card), "RX descriptor with state %x\n",
+ status);
+ goto refill;
+ }
+
+ /* ok, we've got a packet in descr */
+ gelic_net_pass_skb_up(descr, card); /* 1: skb_up sccess */
+
+refill:
+#ifndef GELIC_RING_CHAIN
+ descr->next_descr_addr = 0; /* unlink the descr */
+#endif
+ /* change the descriptor state: */
+ gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+
+ /* refill one desc
+ * FIXME: this can fail, but for now, just leave this
+ * descriptor without skb
+ */
+ gelic_net_prepare_rx_descr(card, descr);
+ chain->head = descr;
+ chain->tail = descr->next;
+ descr->prev->next_descr_addr = descr->bus_addr;
+
+#ifndef GELIC_RING_CHAIN
+ if (dmac_chain_ended) {
+ gelic_net_enable_rxdmac(card);
+ dev_dbg(ctodev(card), "reenable rx dma\n");
+ }
+#endif
+ return 1;
+}
+
+/**
+ * gelic_net_poll - NAPI poll function called by the stack to return packets
+ * @netdev: interface device structure
+ * @budget: number of packets we can pass to the stack at most
+ *
+ * returns 0 if no more packets available to the driver/stack. Returns 1,
+ * if the quota is exceeded, but the driver has still packets.
+ *
+ */
+static int gelic_net_poll(struct net_device *netdev, int *budget)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ int packets_to_do, packets_done = 0;
+ int no_more_packets = 0;
+
+ packets_to_do = min(*budget, netdev->quota);
+
+ while (packets_to_do) {
+ if (gelic_net_decode_one_descr(card)) {
+ packets_done++;
+ packets_to_do--;
+ } else {
+ /* no more packets for the stack */
+ no_more_packets = 1;
+ break;
+ }
+ }
+ netdev->quota -= packets_done;
+ *budget -= packets_done;
+ if (no_more_packets) {
+ netif_rx_complete(netdev);
+ gelic_net_rx_irq_on(card);
+ return 0;
+ } else
+ return 1;
+}
+
+/**
+ * gelic_net_get_stats - get interface statistics
+ * @netdev: interface device structure
+ *
+ * returns the interface statistics residing in the gelic_net_card struct
+ */
+static struct net_device_stats * gelic_net_get_stats(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ return &card->netdev_stats;
+}
+
+/**
+ * gelic_net_change_mtu - changes the MTU of an interface
+ * @netdev: interface device structure
+ * @new_mtu: new MTU value
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
+ * and mtu is outbound only anyway */
+ if ((new_mtu < GELIC_NET_MIN_MTU) ||
+ (new_mtu > GELIC_NET_MAX_MTU)) {
+ return -EINVAL;
+ }
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+/**
+ * gelic_net_interrupt - event handler for gelic_net
+ */
+static irqreturn_t gelic_net_interrupt(int irq, void *ptr)
+{
+ unsigned long flags;
+ struct net_device *netdev = ptr;
+ struct gelic_net_card *card = netdev_priv(netdev);
+ u64 status;
+
+ status = card->irq_status;
+
+ if (!status)
+ return IRQ_NONE;
+
+ if (status & GELIC_NET_RXINT) {
+ gelic_net_rx_irq_off(card);
+ netif_rx_schedule(netdev);
+ }
+
+ if (status & GELIC_NET_TXINT) {
+ spin_lock_irqsave(&card->tx_dma_lock, flags);
+ card->tx_dma_progress = 0;
+ spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+ /* start pending DMA */
+ gelic_net_xmit(NULL, netdev);
+ }
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * gelic_net_poll_controller - artificial interrupt for netconsole etc.
+ * @netdev: interface device structure
+ *
+ * see Documentation/networking/netconsole.txt
+ */
+static void gelic_net_poll_controller(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ gelic_net_set_irq_mask(card, 0);
+ gelic_net_interrupt(netdev->irq, netdev);
+ gelic_net_set_irq_mask(card, card->ghiintmask);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * gelic_net_open_device - open device and map dma region
+ * @card: card structure
+ */
+static int gelic_net_open_device(struct gelic_net_card *card)
+{
+ int result;
+
+ result = ps3_sb_event_receive_port_setup(PS3_BINDING_CPU_ANY,
+ &card->dev->did, card->dev->interrupt_id, &card->netdev->irq);
+
+ if (result) {
+ dev_info(ctodev(card),
+ "%s:%d: gelic_net_open_device failed (%d)\n",
+ __func__, __LINE__, result);
+ result = -EPERM;
+ goto fail_alloc_irq;
+ }
+
+ result = request_irq(card->netdev->irq, gelic_net_interrupt, IRQF_DISABLED,
+ "gelic network", card->netdev);
+
+ if (result) {
+ dev_info(ctodev(card), "%s:%d: request_irq failed (%d)\n",
+ __func__, __LINE__, result);
+ goto fail_request_irq;
+ }
+
+ return 0;
+
+fail_request_irq:
+ ps3_sb_event_receive_port_destroy(&card->dev->did,
+ card->dev->interrupt_id, card->netdev->irq);
+ card->netdev->irq = NO_IRQ;
+fail_alloc_irq:
+ return result;
+}
+
+
+/**
+ * gelic_net_open - called upon ifonfig up
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * gelic_net_open allocates all the descriptors and memory needed for
+ * operation, sets up multicast list and enables interrupts
+ */
+static int gelic_net_open(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ dev_dbg(ctodev(card), " -> %s:%d\n", __func__, __LINE__);
+
+ gelic_net_open_device(card);
+
+ if (gelic_net_init_chain(card, &card->tx_chain,
+ card->descr, GELIC_NET_TX_DESCRIPTORS))
+ goto alloc_tx_failed;
+ if (gelic_net_init_chain(card, &card->rx_chain,
+ card->descr + GELIC_NET_RX_DESCRIPTORS,
+ GELIC_NET_RX_DESCRIPTORS))
+ goto alloc_rx_failed;
+
+ /* head of chain */
+ card->tx_top = card->tx_chain.head;
+ card->rx_top = card->rx_chain.head;
+ dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
+ card->rx_top, card->tx_top, sizeof(struct gelic_net_descr),
+ GELIC_NET_RX_DESCRIPTORS);
+ /* allocate rx skbs */
+ if (gelic_net_alloc_rx_skbs(card))
+ goto alloc_skbs_failed;
+
+ card->tx_dma_progress = 0;
+ card->ghiintmask = GELIC_NET_RXINT | GELIC_NET_TXINT;
+
+ gelic_net_set_irq_mask(card, card->ghiintmask);
+ gelic_net_enable_rxdmac(card);
+
+ netif_start_queue(netdev);
+ netif_carrier_on(netdev);
+ netif_poll_enable(netdev);
+
+ return 0;
+
+alloc_skbs_failed:
+ gelic_net_free_chain(card, card->rx_top);
+alloc_rx_failed:
+ gelic_net_free_chain(card, card->tx_top);
+alloc_tx_failed:
+ return -ENOMEM;
+}
+
+#ifdef GELIC_NET_ETHTOOL
+static void gelic_net_get_drvinfo (struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ strncpy(info->driver, GELIC_NET_DRV_NAME, sizeof(info->driver) - 1);
+ strncpy(info->version, GELIC_NET_DRV_VERSION, sizeof(info->version) - 1);
+}
+
+static int gelic_net_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ int status;
+ u64 v1, v2;
+ int speed, duplex;
+
+ speed = duplex = -1;
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_ETH_PORT_STATUS, GELIC_NET_PORT, 0, 0,
+ &v1, &v2);
+ if (status) {
+ /* link down */
+ } else {
+ if (v1 & GELIC_NET_FULL_DUPLEX) {
+ duplex = DUPLEX_FULL;
+ } else {
+ duplex = DUPLEX_HALF;
+ }
+
+ if (v1 & GELIC_NET_SPEED_10 ) {
+ speed = SPEED_10;
+ } else if (v1 & GELIC_NET_SPEED_100) {
+ speed = SPEED_100;
+ } else if (v1 & GELIC_NET_SPEED_1000) {
+ speed = SPEED_1000;
+ }
+ }
+ cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg |
+ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
+ cmd->advertising = cmd->supported;
+ cmd->speed = speed;
+ cmd->duplex = duplex;
+ cmd->autoneg = AUTONEG_ENABLE; /* always enabled */
+ cmd->port = PORT_TP;
+
+ return 0;
+}
+
+static u32 gelic_net_get_link(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+ int status;
+ u64 v1, v2;
+ int link;
+
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_ETH_PORT_STATUS, GELIC_NET_PORT, 0, 0,
+ &v1, &v2);
+ if (status)
+ return 0; /* link down */
+
+ if (v1 & GELIC_NET_LINK_UP)
+ link = 1;
+ else
+ link = 0;
+
+ return link;
+}
+
+static int gelic_net_nway_reset(struct net_device *netdev)
+{
+ if (netif_running(netdev)) {
+ gelic_net_stop(netdev);
+ gelic_net_open(netdev);
+ }
+ return 0;
+}
+
+static u32 gelic_net_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_IP_CSUM) != 0;
+}
+
+static int gelic_net_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_IP_CSUM;
+ else
+ netdev->features &= ~NETIF_F_IP_CSUM;
+
+ return 0;
+}
+
+static u32 gelic_net_get_rx_csum(struct net_device *netdev)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ return card->rx_csum;
+}
+
+static int gelic_net_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct gelic_net_card *card = netdev_priv(netdev);
+
+ card->rx_csum = data;
+ return 0;
+}
+
+static struct ethtool_ops gelic_net_ethtool_ops = {
+ .get_drvinfo = gelic_net_get_drvinfo,
+ .get_settings = gelic_net_get_settings,
+ .get_link = gelic_net_get_link,
+ .nway_reset = gelic_net_nway_reset,
+ .get_tx_csum = gelic_net_get_tx_csum,
+ .set_tx_csum = gelic_net_set_tx_csum,
+ .get_rx_csum = gelic_net_get_rx_csum,
+ .set_rx_csum = gelic_net_set_rx_csum,
+};
+#endif
+
+/**
+ * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
+ * function (to be called not under interrupt status)
+ * @work: work is context of tx timout task
+ *
+ * called as task when tx hangs, resets interface (if interface is up)
+ */
+static void gelic_net_tx_timeout_task(struct work_struct *work)
+{
+ struct gelic_net_card *card =
+ container_of(work, struct gelic_net_card, tx_timeout_task);
+ struct net_device *netdev = card->netdev;
+
+ dev_info(ctodev(card), "%s:Timed out. Restarting... \n", __func__);
+
+ if (!(netdev->flags & IFF_UP))
+ goto out;
+
+ netif_device_detach(netdev);
+ gelic_net_stop(netdev);
+
+ gelic_net_open(netdev);
+ netif_device_attach(netdev);
+
+out:
+ atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
+ * @netdev: interface device structure
+ *
+ * called, if tx hangs. Schedules a task that resets the interface
+ */
+static void gelic_net_tx_timeout(struct net_device *netdev)
+{
+ struct gelic_net_card *card;
+
+ card = netdev_priv(netdev);
+ atomic_inc(&card->tx_timeout_task_counter);
+ if (netdev->flags & IFF_UP)
+ schedule_work(&card->tx_timeout_task);
+ else
+ atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * gelic_net_setup_netdev_ops - initialization of net_device operations
+ * @netdev: net_device structure
+ *
+ * fills out function pointers in the net_device structure
+ */
+static void gelic_net_setup_netdev_ops(struct net_device *netdev)
+{
+ netdev->open = &gelic_net_open;
+ netdev->stop = &gelic_net_stop;
+ netdev->hard_start_xmit = &gelic_net_xmit;
+ netdev->get_stats = &gelic_net_get_stats;
+ netdev->set_multicast_list = &gelic_net_set_multi;
+ netdev->change_mtu = &gelic_net_change_mtu;
+ /* tx watchdog */
+ netdev->tx_timeout = &gelic_net_tx_timeout;
+ netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
+ /* NAPI */
+ netdev->poll = &gelic_net_poll;
+ netdev->weight = GELIC_NET_NAPI_WEIGHT;
+#ifdef GELIC_NET_ETHTOOL
+ netdev->ethtool_ops = &gelic_net_ethtool_ops;
+#endif
+}
+
+/**
+ * gelic_net_setup_netdev - initialization of net_device
+ * @card: card structure
+ *
+ * Returns 0 on success or <0 on failure
+ *
+ * gelic_net_setup_netdev initializes the net_device structure
+ **/
+static int gelic_net_setup_netdev(struct gelic_net_card *card)
+{
+ struct net_device *netdev = card->netdev;
+ struct sockaddr addr;
+ unsigned int i;
+ int status;
+ u64 v1, v2;
+
+ SET_MODULE_OWNER(netdev);
+ spin_lock_init(&card->tx_dma_lock);
+
+ card->rx_csum = GELIC_NET_RX_CSUM_DEFAULT;
+
+ gelic_net_setup_netdev_ops(netdev);
+
+ netdev->features = NETIF_F_IP_CSUM;
+
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_MAC_ADDRESS,
+ 0, 0, 0, &v1, &v2);
+ if (status || !is_valid_ether_addr((u8*)&v1)) {
+ dev_info(ctodev(card),
+ "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
+ __func__,status);
+ return -EINVAL;
+ }
+ v1 <<= 16;
+ memcpy(addr.sa_data, &v1, ETH_ALEN);
+ memcpy(netdev->dev_addr, addr.sa_data, ETH_ALEN);
+ dev_info(ctodev(card), "MAC addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
+
+ card->vlan_index = -1; /* no vlan */
+ for (i = 0; i < GELIC_NET_VLAN_MAX; i++) {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_NET_GET_VLAN_ID,
+ i + 1, /* index; one based */
+ 0, 0, &v1, &v2);
+ if (status == GELIC_NET_VLAN_NO_ENTRY) {
+ dev_dbg(ctodev(card),
+ "GELIC_VLAN_ID no entry:%d, VLAN disabled\n",
+ status);
+ card->vlan_id[i] = 0;
+ } else if (status) {
+ dev_dbg(ctodev(card),
+ "%s:GELIC_NET_VLAN_ID faild, status=%d\n",
+ __func__, status);
+ card->vlan_id[i] = 0;
+ } else {
+ card->vlan_id[i] = (u32)v1;
+ dev_dbg(ctodev(card), "vlan_id:%d, %lx\n", i, v1);
+ }
+ }
+ if (card->vlan_id[GELIC_NET_VLAN_WIRED - 1])
+ card->vlan_index = GELIC_NET_VLAN_WIRED - 1;
+
+ status = register_netdev(netdev);
+ if (status) {
+ dev_err(ctodev(card), "%s:Couldn't register net_device: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
+/**
+ * gelic_net_alloc_card - allocates net_device and card structure
+ *
+ * returns the card structure or NULL in case of errors
+ *
+ * the card and net_device structures are linked to each other
+ */
+static struct gelic_net_card * gelic_net_alloc_card(void)
+{
+ struct net_device *netdev;
+ struct gelic_net_card *card;
+ size_t alloc_size;
+
+ alloc_size = sizeof (*card) +
+ sizeof (struct gelic_net_descr) * GELIC_NET_RX_DESCRIPTORS +
+ sizeof (struct gelic_net_descr) * GELIC_NET_TX_DESCRIPTORS;
+ /*
+ * we assume private data is allocated 32 bytes (or more) aligned
+ * so that gelic_net_descr should be 32 bytes aligned.
+ * Current alloc_etherdev() does do it because NETDEV_ALIGN
+ * is 32.
+ * check this assumption here.
+ */
+ BUILD_BUG_ON(NETDEV_ALIGN < 32);
+ BUILD_BUG_ON(offsetof(struct gelic_net_card, irq_status) % 8);
+ BUILD_BUG_ON(offsetof(struct gelic_net_card, descr) % 32);
+
+ netdev = alloc_etherdev(alloc_size);
+ if (!netdev)
+ return NULL;
+
+ card = netdev_priv(netdev);
+ card->netdev = netdev;
+ INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
+ init_waitqueue_head(&card->waitq);
+ atomic_set(&card->tx_timeout_task_counter, 0);
+
+ return card;
+}
+
+/**
+ * ps3_gelic_driver_probe - add a device to the control of this driver
+ */
+static int ps3_gelic_driver_probe (struct ps3_system_bus_device *dev)
+{
+ struct gelic_net_card * card;
+ int result;
+
+ card = gelic_net_alloc_card();
+
+ if (!card) {
+ dev_info(&dev->core, "gelic_net_alloc_card failed\n");
+ result = -ENOMEM;
+ goto fail_alloc_card;
+ }
+
+ ps3_system_bus_set_driver_data(dev, card);
+ card->dev = dev;
+
+ result = ps3_open_hv_device(dev);
+
+ if (result) {
+ dev_dbg(&dev->core, "ps3_open_hv_device failed\n");
+ goto fail_open;
+ }
+
+ result = ps3_dma_region_create(dev->d_region);
+
+ if (result) {
+ dev_dbg(&dev->core, "ps3_dma_region_create failed(%d)\n",
+ result);
+ BUG_ON("check region type");
+ goto fail_dma_region;
+ }
+
+ result = lv1_net_set_interrupt_status_indicator(bus_id(card),
+ dev_id(card),
+ ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
+ 0);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "lv1_net_set_interrupt_status_indicator failed: %s\n",
+ ps3_result(result));
+ result = -EIO;
+ goto fail_status_indicator;
+ }
+
+ result = gelic_net_setup_netdev(card);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: "
+ "(%d)\n", __func__, __LINE__, result);
+ goto fail_setup_netdev;
+ }
+
+ return 0;
+
+fail_setup_netdev:
+ lv1_net_set_interrupt_status_indicator(bus_id(card),
+ bus_id(card),
+ 0 , 0);
+fail_status_indicator:
+ ps3_dma_region_free(dev->d_region);
+fail_dma_region:
+ ps3_close_hv_device(dev);
+fail_open:
+ ps3_system_bus_set_driver_data(dev, NULL);
+ free_netdev(card->netdev);
+fail_alloc_card:
+ return result;
+}
+
+/**
+ * ps3_gelic_driver_remove - remove a device from the control of this driver
+ */
+
+static int ps3_gelic_driver_remove (struct ps3_system_bus_device *dev)
+{
+ struct gelic_net_card * card;
+
+ card = ps3_system_bus_get_driver_data(dev);
+
+ wait_event(card->waitq,
+ atomic_read(&card->tx_timeout_task_counter) == 0);
+
+ lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
+ 0 , 0);
+
+ unregister_netdev(card->netdev);
+ free_netdev(card->netdev);
+
+ ps3_system_bus_set_driver_data(dev, NULL);
+
+ ps3_dma_region_free(dev->d_region);
+
+ ps3_close_hv_device(dev);
+
+ return 0;
+}
+
+static struct ps3_system_bus_driver ps3_gelic_driver = {
+ .match_id = PS3_MATCH_ID_GELIC,
+ .probe = ps3_gelic_driver_probe,
+ .remove = ps3_gelic_driver_remove,
+ .shutdown = ps3_gelic_driver_remove,
+ .core = {
+ .name = "ps3_gelic_driver",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ps3_gelic_driver_init (void)
+{
+ return firmware_has_feature(FW_FEATURE_PS3_LV1)
+ ? ps3_system_bus_driver_register(&ps3_gelic_driver,
+ PS3_IOBUS_SB)
+ : -ENODEV;
+}
+
+static void __exit ps3_gelic_driver_exit (void)
+{
+ ps3_system_bus_driver_unregister(&ps3_gelic_driver);
+}
+
+module_init (ps3_gelic_driver_init);
+module_exit (ps3_gelic_driver_exit);
+
+MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
+
--- /dev/null
+++ b/drivers/net/gelic_net.h
@@ -0,0 +1,233 @@
+/*
+ * PS3 Platfom gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corporation.
+ *
+ * this file is based on: spider_net.h
+ *
+ * Network device driver for Cell Processor-Based Blade
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@...ibm.com>
+ * Jens Osterkamp <Jens.Osterkamp@...ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _GELIC_NET_H
+#define _GELIC_NET_H
+
+#define GELIC_NET_DRV_NAME "Gelic Network Driver"
+#define GELIC_NET_DRV_VERSION "1.0"
+
+#define GELIC_NET_ETHTOOL /* use ethtool */
+
+/* ioctl */
+#define GELIC_NET_GET_MODE (SIOCDEVPRIVATE + 0)
+#define GELIC_NET_SET_MODE (SIOCDEVPRIVATE + 1)
+
+/* descriptors */
+#define GELIC_NET_RX_DESCRIPTORS 128 /* num of descriptors */
+#define GELIC_NET_TX_DESCRIPTORS 128 /* num of descriptors */
+
+#define GELIC_NET_MAX_MTU 2308
+#define GELIC_NET_MIN_MTU 64
+#define GELIC_NET_RXBUF_ALIGN 128
+#define GELIC_NET_RX_CSUM_DEFAULT 1 /* hw chksum */
+#define GELIC_NET_WATCHDOG_TIMEOUT 5*HZ
+#define GELIC_NET_NAPI_WEIGHT (GELIC_NET_RX_DESCRIPTORS)
+#define GELIC_NET_BROADCAST_ADDR 0xffffffffffffL
+#define GELIC_NET_VLAN_POS (VLAN_ETH_ALEN * 2)
+#define GELIC_NET_VLAN_MAX 4
+#define GELIC_NET_MC_COUNT_MAX 32 /* multicast address list */
+
+enum gelic_net_int0_status {
+ GELIC_NET_GDTDCEINT = 24,
+ GELIC_NET_GRFANMINT = 28,
+};
+
+/* GHIINT1STS bits */
+enum gelic_net_int1_status {
+ GELIC_NET_GDADCEINT = 14,
+};
+
+/* interrupt mask */
+#define GELIC_NET_TXINT (1L << (GELIC_NET_GDTDCEINT + 32))
+
+#define GELIC_NET_RXINT0 (1L << (GELIC_NET_GRFANMINT + 32))
+#define GELIC_NET_RXINT1 (1L << GELIC_NET_GDADCEINT)
+#define GELIC_NET_RXINT (GELIC_NET_RXINT0 | GELIC_NET_RXINT1)
+
+ /* RX descriptor data_status bits */
+#define GELIC_NET_RXDMADU 0x80000000 /* destination MAC addr unknown */
+#define GELIC_NET_RXLSTFBF 0x40000000 /* last frame buffer */
+#define GELIC_NET_RXIPCHK 0x20000000 /* IP checksum performed */
+#define GELIC_NET_RXTCPCHK 0x10000000 /* TCP/UDP checksup performed */
+#define GELIC_NET_RXIPSPKT 0x08000000 /* IPsec packet */
+#define GELIC_NET_RXIPSAHPRT 0x04000000 /* IPsec AH protocol performed */
+#define GELIC_NET_RXIPSESPPRT 0x02000000 /* IPsec ESP protocol performed */
+#define GELIC_NET_RXSESPAH 0x01000000 /* IPsec ESP protocol auth performed */
+#define GELIC_NET_RXWTPKT 0x00C00000 /*
+ * wakeup trigger packet
+ * 01: Magic Packet (TM)
+ * 10: ARP packet
+ * 11: Multicast MAC addr
+ */
+#define GELIC_NET_RXVLNPKT 0x00200000 /* VLAN packet */
+/* bit 20..16 reserved */
+#define GELIC_NET_RXRECNUM 0x0000ff00 /* reception receipt number */
+/* bit 7..0 reserved */
+
+#define GELIC_NET_TXDESC_TAIL 0
+#define GELIC_NET_DATA_STATUS_CHK_MASK (GELIC_NET_RXIPCHK | GELIC_NET_RXTCPCHK)
+
+/* RX descriptor data_error bits */
+/* bit 31 reserved */
+#define GELIC_NET_RXALNERR 0x40000000 /* alignement error 10/100M */
+#define GELIC_NET_RXOVERERR 0x20000000 /* oversize error */
+#define GELIC_NET_RXRNTERR 0x10000000 /* Runt error */
+#define GELIC_NET_RXIPCHKERR 0x08000000 /* IP checksum error */
+#define GELIC_NET_RXTCPCHKERR 0x04000000 /* TCP/UDP checksum error */
+#define GELIC_NET_RXUMCHSP 0x02000000 /* unmatched sp on sp */
+#define GELIC_NET_RXUMCHSPI 0x01000000 /* unmatched SPI on SAD */
+#define GELIC_NET_RXUMCHSAD 0x00800000 /* unmatched SAD */
+#define GELIC_NET_RXIPSAHERR 0x00400000 /* auth error on AH protocol
+ * processing */
+#define GELIC_NET_RXIPSESPAHERR 0x00200000 /* auth error on ESP protocol
+ * processing */
+#define GELIC_NET_RXDRPPKT 0x00100000 /* drop packet */
+#define GELIC_NET_RXIPFMTERR 0x00080000 /* IP packet format error */
+/* bit 18 reserved */
+#define GELIC_NET_RXDATAERR 0x00020000 /* IP packet format error */
+#define GELIC_NET_RXCALERR 0x00010000 /* cariier extension length
+ * error */
+#define GELIC_NET_RXCREXERR 0x00008000 /* carrier extention error */
+#define GELIC_NET_RXMLTCST 0x00004000 /* multicast address frame */
+/* bit 13..0 reserved */
+#define GELIC_NET_DATA_ERROR_CHK_MASK (GELIC_NET_RXIPCHKERR | GELIC_NET_RXTCPCHKERR)
+
+
+/* tx descriptor command and status */
+#define GELIC_NET_DMAC_CMDSTAT_NOCS 0xa0080000 /* middle of frame */
+#define GELIC_NET_DMAC_CMDSTAT_TCPCS 0xa00a0000
+#define GELIC_NET_DMAC_CMDSTAT_UDPCS 0xa00b0000
+#define GELIC_NET_DMAC_CMDSTAT_END_FRAME 0x00040000 /* end of frame */
+
+#define GELIC_NET_DMAC_CMDSTAT_RXDCEIS 0x00000002 /* descriptor chain end
+ * interrupt status */
+
+#define GELIC_NET_DMAC_CMDSTAT_CHAIN_END 0x00000002 /* RXDCEIS:DMA stopped */
+#define GELIC_NET_DMAC_CMDSTAT_NOT_IN_USE 0xb0000000
+#define GELIC_NET_DESCR_IND_PROC_SHIFT 28
+#define GELIC_NET_DESCR_IND_PROC_MASKO 0x0fffffff
+
+
+enum gelic_net_descr_status {
+ GELIC_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */
+ GELIC_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */
+ GELIC_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */
+ GELIC_NET_DESCR_FRAME_END = 0x04, /* used in rx */
+ GELIC_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */
+ GELIC_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */
+ GELIC_NET_DESCR_NOT_IN_USE /* any other value */
+};
+/* for lv1_net_control */
+#define GELIC_NET_GET_MAC_ADDRESS 0x0000000000000001
+#define GELIC_NET_GET_ETH_PORT_STATUS 0x0000000000000002
+#define GELIC_NET_SET_NEGOTIATION_MODE 0x0000000000000003
+#define GELIC_NET_GET_VLAN_ID 0x0000000000000004
+
+#define GELIC_NET_LINK_UP 0x0000000000000001
+#define GELIC_NET_FULL_DUPLEX 0x0000000000000002
+#define GELIC_NET_AUTO_NEG 0x0000000000000004
+#define GELIC_NET_SPEED_10 0x0000000000000010
+#define GELIC_NET_SPEED_100 0x0000000000000020
+#define GELIC_NET_SPEED_1000 0x0000000000000040
+
+#define GELIC_NET_VLAN_ALL 0x0000000000000001
+#define GELIC_NET_VLAN_WIRED 0x0000000000000002
+#define GELIC_NET_VLAN_WIRELESS 0x0000000000000003
+#define GELIC_NET_VLAN_PSP 0x0000000000000004
+#define GELIC_NET_VLAN_PORT0 0x0000000000000010
+#define GELIC_NET_VLAN_PORT1 0x0000000000000011
+#define GELIC_NET_VLAN_PORT2 0x0000000000000012
+#define GELIC_NET_VLAN_DAEMON_CLIENT_BSS 0x0000000000000013
+#define GELIC_NET_VLAN_LIBERO_CLIENT_BSS 0x0000000000000014
+#define GELIC_NET_VLAN_NO_ENTRY -6
+
+#define GELIC_NET_PORT 2 /* for port status */
+
+/* size of hardware part of gelic descriptor */
+#define GELIC_NET_DESCR_SIZE (32)
+struct gelic_net_descr {
+ /* as defined by the hardware */
+ u32 buf_addr;
+ u32 buf_size;
+ u32 next_descr_addr;
+ u32 dmac_cmd_status;
+ u32 result_size;
+ u32 valid_size; /* all zeroes for tx */
+ u32 data_status;
+ u32 data_error; /* all zeroes for tx */
+
+ /* used in the driver */
+ struct sk_buff *skb;
+ dma_addr_t bus_addr;
+ struct gelic_net_descr *next;
+ struct gelic_net_descr *prev;
+ struct vlan_ethhdr vlan;
+} __attribute__((aligned(32)));
+
+struct gelic_net_descr_chain {
+ /* we walk from tail to head */
+ struct gelic_net_descr *head;
+ struct gelic_net_descr *tail;
+};
+
+struct gelic_net_card {
+ struct net_device *netdev;
+ /*
+ * hypervisor requires irq_status should be
+ * 8 bytes aligned, but u64 member is
+ * always disposed in that manner
+ */
+ u64 irq_status;
+ u64 ghiintmask;
+
+ struct ps3_system_bus_device *dev;
+ u32 vlan_id[GELIC_NET_VLAN_MAX];
+ int vlan_index;
+
+ struct gelic_net_descr_chain tx_chain;
+ struct gelic_net_descr_chain rx_chain;
+ spinlock_t chain_lock;
+
+ struct net_device_stats netdev_stats;
+ int rx_csum;
+ spinlock_t tx_dma_lock;
+ int tx_dma_progress;
+
+ struct work_struct tx_timeout_task;
+ atomic_t tx_timeout_task_counter;
+ wait_queue_head_t waitq;
+
+ struct gelic_net_descr *tx_top, *rx_top;
+ struct gelic_net_descr descr[0];
+};
+
+
+extern unsigned long p_to_lp(long pa);
+#endif //_GELIC_NET_H
--
Masakazu MOKUNO
--
Masakazu MOKUNO
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists