| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070618225940.GA27773@electric-eye.fr.zoreil.com>
Date: Tue, 19 Jun 2007 00:59:40 +0200
From: Francois Romieu <romieu@...zoreil.com>
To: Tim Durack <tdurack@...il.com>
Cc: netdev@...r.kernel.org
Subject: Re: r8169 ethernet bonding problems
Tim Durack <tdurack@...il.com> :
[snip]
Can you try 2.6.22-rc5 +
http://www.fr.zoreil.com/people/francois/misc/20070619-2.6.22-rc5-r8169-test.patch
It does not seem to work too bad here (tested with 2.6.22-rc5 + patch):
# grep bonding /etc/modprobe.conf
alias bond0 bonding
options bonding miimon=1000 mode=balance-rr
$ dmesg
[ 0.000000] Linux version 2.6.22-rc5 (root@...alhost.localdomain) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #9 Tue Jun 19 00:19:24 CEST 2007
[...]
[ 35.516210] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 35.516251] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 35.516279] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 35.516632] eth0: RTL8168b/8111b at 0xf8a08000, 00:13:8f:ea:b1:5d, XID 38000000 IRQ 17
[ 35.523173] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 35.523204] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 35.523473] eth1: RTL8110s at 0xf8a0a800, 00:09:5b:bd:c1:a5, XID 04000000 IRQ 20
[ 35.526654] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 35.526683] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 35.526940] eth2: RTL8110s at 0xf8a0cc00, 00:09:5b:bd:c1:a5, XID 04000000 IRQ 21
[ 35.581378] USB Universal Host Controller Interface driver v3.0
[ 35.582010] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 35.582028] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[...]
[ 46.300540] Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007)
[ 46.307134] bonding: MII link monitoring set to 1000 ms
[ 50.515819] r8169: eth1: link up
[ 50.519218] r8169: eth1: link up
[ 50.539460] bonding: bond0: enslaving eth1 as an active interface with an up link.
[ 50.656913] r8169: eth2: link up
[ 50.660296] r8169: eth2: link up
[ 50.679294] bonding: bond0: enslaving eth2 as an active interface with an up link.
$ ifconfig
bond0 Link encap:Ethernet HWaddr 00:09:5B:BD:C1:A5
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::209:5bff:febd:c1a5/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:319 errors:0 dropped:0 overruns:0 frame:0
TX packets:329 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:31583 (30.8 KiB) TX bytes:30884 (30.1 KiB)
eth1 Link encap:Ethernet HWaddr 00:09:5B:BD:C1:A5
inet6 addr: fe80::209:5bff:febd:c1a5/64 Scope:Link
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:158 errors:0 dropped:0 overruns:0 frame:0
TX packets:165 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16228 (15.8 KiB) TX bytes:15418 (15.0 KiB)
Interrupt:20 Base address:0xa800
eth2 Link encap:Ethernet HWaddr 00:09:5B:BD:C1:A5
inet6 addr: fe80::209:5bff:febd:c1a5/64 Scope:Link
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:161 errors:0 dropped:0 overruns:0 frame:0
TX packets:164 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15355 (14.9 KiB) TX bytes:15466 (15.1 KiB)
Interrupt:21 Base address:0xcc00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
# ethtool -S eth1
NIC statistics:
tx_packets: 205
rx_packets: 195
tx_errors: 0
rx_errors: 0
rx_missed: 0
align_errors: 0
tx_single_collisions: 0
tx_multi_collisions: 0
unicast: 192
broadcast: 1
multicast: 2
tx_aborted: 0
tx_underrun: 0
# ethtool -S eth2
NIC statistics:
tx_packets: 205
rx_packets: 198
tx_errors: 0
rx_errors: 0
rx_missed: 0
align_errors: 0
tx_single_collisions: 0
tx_multi_collisions: 0
unicast: 195
broadcast: 2
multicast: 1
tx_aborted: 0
tx_underrun: 0
Let's play gently with the cables:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.276 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.184 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.195 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=0.173 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=0.212 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=0.173 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=0.198 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=0.173 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=0.200 ms
64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=0.199 ms
64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=0.185 ms
64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=0.237 ms
64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=0.217 ms
64 bytes from 192.168.1.1: icmp_seq=14 ttl=64 time=0.187 ms
64 bytes from 192.168.1.1: icmp_seq=15 ttl=64 time=0.222 ms
64 bytes from 192.168.1.1: icmp_seq=16 ttl=64 time=0.193 ms
64 bytes from 192.168.1.1: icmp_seq=17 ttl=64 time=0.189 ms
64 bytes from 192.168.1.1: icmp_seq=18 ttl=64 time=0.218 ms
64 bytes from 192.168.1.1: icmp_seq=19 ttl=64 time=0.207 ms
64 bytes from 192.168.1.1: icmp_seq=20 ttl=64 time=0.200 ms
64 bytes from 192.168.1.1: icmp_seq=21 ttl=64 time=0.193 ms
64 bytes from 192.168.1.1: icmp_seq=22 ttl=64 time=0.176 ms
64 bytes from 192.168.1.1: icmp_seq=23 ttl=64 time=0.216 ms
64 bytes from 192.168.1.1: icmp_seq=24 ttl=64 time=0.194 ms
64 bytes from 192.168.1.1: icmp_seq=25 ttl=64 time=0.218 ms
64 bytes from 192.168.1.1: icmp_seq=26 ttl=64 time=0.192 ms
64 bytes from 192.168.1.1: icmp_seq=27 ttl=64 time=0.173 ms
64 bytes from 192.168.1.1: icmp_seq=28 ttl=64 time=0.214 ms
64 bytes from 192.168.1.1: icmp_seq=29 ttl=64 time=0.236 ms
64 bytes from 192.168.1.1: icmp_seq=30 ttl=64 time=0.188 ms
64 bytes from 192.168.1.1: icmp_seq=31 ttl=64 time=0.186 ms
64 bytes from 192.168.1.1: icmp_seq=32 ttl=64 time=0.164 ms
64 bytes from 192.168.1.1: icmp_seq=33 ttl=64 time=0.213 ms
64 bytes from 192.168.1.1: icmp_seq=34 ttl=64 time=0.180 ms
64 bytes from 192.168.1.1: icmp_seq=35 ttl=64 time=0.211 ms
64 bytes from 192.168.1.1: icmp_seq=36 ttl=64 time=0.178 ms
64 bytes from 192.168.1.1: icmp_seq=37 ttl=64 time=0.209 ms
64 bytes from 192.168.1.1: icmp_seq=38 ttl=64 time=0.201 ms
64 bytes from 192.168.1.1: icmp_seq=39 ttl=64 time=0.205 ms
64 bytes from 192.168.1.1: icmp_seq=40 ttl=64 time=0.187 ms
64 bytes from 192.168.1.1: icmp_seq=41 ttl=64 time=0.190 ms
64 bytes from 192.168.1.1: icmp_seq=42 ttl=64 time=0.262 ms
64 bytes from 192.168.1.1: icmp_seq=43 ttl=64 time=0.198 ms
[...]
[ 65.364228] eth2: no IPv6 routers present
[ 65.815462] eth1: no IPv6 routers present
[ 1197.478365] r8169: eth2: link down
[ 1197.679547] bonding: bond0: link status definitely down for interface eth2, disabling it
[ 1201.812241] r8169: eth2: link up
[ 1202.726842] bonding: bond0: link status definitely up for interface eth2.
[ 1208.448707] r8169: eth1: link down
[ 1208.779295] bonding: bond0: link status definitely down for interface eth1, disabling it
[ 1211.483899] r8169: eth1: link up
[ 1211.810965] bonding: bond0: link status definitely up for interface eth1.
--
Ueimor
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists