lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20070622122338.15215.41966.sendpatchset@localhost.localdomain>
Date:	Fri, 22 Jun 2007 14:24:14 +0200 (MEST)
From:	Patrick McHardy <kaber@...sh.net>
To:	netdev@...r.kernel.org
Cc:	Patrick McHardy <kaber@...sh.net>
Subject: [E1000 05/05]: Secondary unicast address support

[E1000]: Secondary unicast address support

Add support for configuring secondary unicast addresses. Unicast
addresses take precendece over multicast addresses when filling
the exact address filters to avoid going to promiscous mode.
When more unicast addresses are present than filter slots,
unicast filtering is disabled and all slots can be used for
multicast addresses.

Signed-off-by: Patrick McHardy <kaber@...sh.net>

---
commit 9613e4e4017b8bb68fcdd28cf5f9ae00bff18e28
tree e19261eea046a0404af0b26e2b99725ee33ae3c2
parent 099e4ab74adb9418155132b093533f152a31b583
author Patrick McHardy <kaber@...sh.net> Fri, 22 Jun 2007 14:13:48 +0200
committer Patrick McHardy <kaber@...sh.net> Fri, 22 Jun 2007 14:13:48 +0200

 drivers/net/e1000/e1000_main.c |   47 ++++++++++++++++++++++++++--------------
 1 files changed, 31 insertions(+), 16 deletions(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cf8af92..716fc8f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -149,7 +149,7 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
                                 struct e1000_tx_ring *tx_ring);
 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
                                 struct e1000_rx_ring *rx_ring);
-static void e1000_set_multi(struct net_device *netdev);
+static void e1000_set_rx_mode(struct net_device *netdev);
 static void e1000_update_phy_info(unsigned long data);
 static void e1000_watchdog(unsigned long data);
 static void e1000_82547_tx_fifo_stall(unsigned long data);
@@ -513,7 +513,7 @@ static void e1000_configure(struct e1000_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	int i;
 
-	e1000_set_multi(netdev);
+	e1000_set_rx_mode(netdev);
 
 	e1000_restore_vlan(adapter);
 	e1000_init_manageability(adapter);
@@ -924,7 +924,7 @@ e1000_probe(struct pci_dev *pdev,
 	netdev->stop = &e1000_close;
 	netdev->hard_start_xmit = &e1000_xmit_frame;
 	netdev->get_stats = &e1000_get_stats;
-	netdev->set_multicast_list = &e1000_set_multi;
+	netdev->set_rx_mode = &e1000_set_rx_mode;
 	netdev->set_mac_address = &e1000_set_mac;
 	netdev->change_mtu = &e1000_change_mtu;
 	netdev->do_ioctl = &e1000_ioctl;
@@ -2412,21 +2412,22 @@ e1000_set_mac(struct net_device *netdev, void *p)
 }
 
 /**
- * e1000_set_multi - Multicast and Promiscuous mode set
+ * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
  * @netdev: network interface device structure
  *
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated.  This routine is
- * responsible for configuring the hardware for proper multicast,
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
  * promiscuous mode, and all-multi behavior.
  **/
 
 static void
-e1000_set_multi(struct net_device *netdev)
+e1000_set_rx_mode(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	struct dev_mc_list *mc_ptr;
+	struct dev_addr_list *uc_ptr;
+	struct dev_addr_list *mc_ptr;
 	uint32_t rctl;
 	uint32_t hash_value;
 	int i, rar_entries = E1000_RAR_ENTRIES;
@@ -2449,9 +2450,16 @@ e1000_set_multi(struct net_device *netdev)
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
 	} else if (netdev->flags & IFF_ALLMULTI) {
 		rctl |= E1000_RCTL_MPE;
-		rctl &= ~E1000_RCTL_UPE;
 	} else {
-		rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+		rctl &= ~E1000_RCTL_MPE;
+	}
+
+	uc_ptr = NULL;
+	if (netdev->uc_count > rar_entries - 1) {
+		rctl |= E1000_RCTL_UPE;
+	} else if (!(netdev->flags & IFF_PROMISC)) {
+		rctl &= ~E1000_RCTL_UPE;
+		uc_ptr = netdev->uc_list;
 	}
 
 	E1000_WRITE_REG(hw, RCTL, rctl);
@@ -2461,7 +2469,10 @@ e1000_set_multi(struct net_device *netdev)
 	if (hw->mac_type == e1000_82542_rev2_0)
 		e1000_enter_82542_rst(adapter);
 
-	/* load the first 14 multicast address into the exact filters 1-14
+	/* load the first 14 addresses into the exact filters 1-14. Unicast
+	 * addresses take precedence to avoid disabling unicast filtering
+	 * when possible.
+	 *
 	 * RAR 0 is used for the station MAC adddress
 	 * if there are not 14 addresses, go ahead and clear the filters
 	 * -- with 82571 controllers only 0-13 entries are filled here
@@ -2469,8 +2480,11 @@ e1000_set_multi(struct net_device *netdev)
 	mc_ptr = netdev->mc_list;
 
 	for (i = 1; i < rar_entries; i++) {
-		if (mc_ptr) {
-			e1000_rar_set(hw, mc_ptr->dmi_addr, i);
+		if (uc_ptr) {
+			e1000_rar_set(hw, uc_ptr->da_addr, i);
+			uc_ptr = uc_ptr->next;
+		} else if (mc_ptr) {
+			e1000_rar_set(hw, mc_ptr->da_addr, i);
 			mc_ptr = mc_ptr->next;
 		} else {
 			E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
@@ -2479,6 +2493,7 @@ e1000_set_multi(struct net_device *netdev)
 			E1000_WRITE_FLUSH(hw);
 		}
 	}
+	WARN_ON(uc_ptr != NULL);
 
 	/* clear the old settings from the multicast hash table */
 
@@ -2490,7 +2505,7 @@ e1000_set_multi(struct net_device *netdev)
 	/* load any remaining addresses into the hash table */
 
 	for (; mc_ptr; mc_ptr = mc_ptr->next) {
-		hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
+		hash_value = e1000_hash_mc_addr(hw, mc_ptr->da_addr);
 		e1000_mta_set(hw, hash_value);
 	}
 
@@ -5098,7 +5113,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	if (wufc) {
 		e1000_setup_rctl(adapter);
-		e1000_set_multi(netdev);
+		e1000_set_rx_mode(netdev);
 
 		/* turn on all-multi mode if wake on multicast is enabled */
 		if (wufc & E1000_WUFC_MC) {
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ