| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070701202139.GM10869@stusta.de>
Date: Sun, 1 Jul 2007 22:21:39 +0200
From: Adrian Bunk <bunk@...sta.de>
To: jgarzik@...ox.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
saw@....sw.com.sg
Subject: [2.6 patch] the overdue eepro100 removal
This patch contains the overdue removal of the eepro100 driver.
Signed-off-by: Adrian Bunk <bunk@...sta.de>
---
Documentation/feature-removal-schedule.txt | 7
MAINTAINERS | 5
drivers/net/Kconfig | 14
drivers/net/Makefile | 1
drivers/net/eepro100.c | 2406 ---------------------
5 files changed, 2433 deletions(-)
--- linux-2.6.20-rc2-mm1/MAINTAINERS.old 2007-01-02 21:29:08.000000000 +0100
+++ linux-2.6.20-rc2-mm1/MAINTAINERS 2007-01-02 21:29:14.000000000 +0100
@@ -1077,11 +1077,6 @@
W: bluesmoke.sourceforge.net
S: Maintained
-EEPRO100 NETWORK DRIVER
-P: Andrey V. Savochkin
-M: saw@....sw.com.sg
-S: Maintained
-
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
--- linux-2.6.20-rc2-mm1/drivers/net/Kconfig.old 2007-01-02 21:29:22.000000000 +0100
+++ linux-2.6.20-rc2-mm1/drivers/net/Kconfig 2007-01-02 21:29:38.000000000 +0100
@@ -1471,20 +1471,6 @@
<file:Documentation/networking/net-modules.txt>. The module
will be called dgrs.
-config EEPRO100
- tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
- depends on NET_PCI && PCI
- select MII
- help
- If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
- card, say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called eepro100.
-
-
config E100
tristate "Intel(R) PRO/100+ support"
depends on NET_PCI && PCI
--- linux-2.6.20-rc2-mm1/drivers/net/Makefile.old 2007-01-02 21:29:44.000000000 +0100
+++ linux-2.6.20-rc2-mm1/drivers/net/Makefile 2007-01-02 21:29:51.000000000 +0100
@@ -44,7 +44,6 @@
obj-$(CONFIG_TYPHOON) += typhoon.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCNET32) += pcnet32.o
-obj-$(CONFIG_EEPRO100) += eepro100.o
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
--- linux-2.6.22-rc6-mm1/Documentation/feature-removal-schedule.txt.old 2007-06-30 00:10:08.000000000 +0200
+++ linux-2.6.22-rc6-mm1/Documentation/feature-removal-schedule.txt 2007-06-30 00:10:38.000000000 +0200
@@ -97,13 +97,6 @@
---------------------------
-What: eepro100 network driver
-When: January 2007
-Why: replaced by the e100 driver
-Who: Adrian Bunk <bunk@...sta.de>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
--- linux-2.6.22-rc6-mm1/drivers/net/eepro100.c 2007-06-28 14:54:31.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,2406 +0,0 @@
-/* drivers/net/eepro100.c: An Intel i82557-559 Ethernet driver for Linux. */
-/*
- Written 1996-1999 by Donald Becker.
-
- The driver also contains updates by different kernel developers
- (see incomplete list below).
- Current maintainer is Andrey V. Savochkin <saw@....sw.com.sg>.
- Please use this email address and linux-kernel mailing list for bug reports.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- This driver is for the Intel EtherExpress Pro100 (Speedo3) design.
- It should work with all i82557/558/559 boards.
-
- Version history:
- 1998 Apr - 2000 Feb Andrey V. Savochkin <saw@....sw.com.sg>
- Serious fixes for multicast filter list setting, TX timeout routine;
- RX ring refilling logic; other stuff
- 2000 Feb Jeff Garzik <jgarzik@...ox.com>
- Convert to new PCI driver interface
- 2000 Mar 24 Dragan Stancevic <visitor@...inux.com>
- Disabled FC and ER, to avoid lockups when when we get FCP interrupts.
- 2000 Jul 17 Goutham Rao <goutham.rao@...el.com>
- PCI DMA API fixes, adding pci_dma_sync_single calls where neccesary
- 2000 Aug 31 David Mosberger <davidm@....hp.com>
- rx_align support: enables rx DMA without causing unaligned accesses.
-*/
-
-static const char * const version =
-"eepro100.c:v1.09j-t 9/29/99 Donald Becker\n"
-"eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@....sw.com.sg> and others\n";
-
-/* A few user-configurable values that apply to all boards.
- First set is undocumented and spelled per Intel recommendations. */
-
-static int congenb /* = 0 */; /* Enable congestion control in the DP83840. */
-static int txfifo = 8; /* Tx FIFO threshold in 4 byte units, 0-15 */
-static int rxfifo = 8; /* Rx FIFO threshold, default 32 bytes. */
-/* Tx/Rx DMA burst length, 0-127, 0 == no preemption, tx==128 -> disabled. */
-static int txdmacount = 128;
-static int rxdmacount /* = 0 */;
-
-#if defined(__ia64__) || defined(__alpha__) || defined(__sparc__) || defined(__mips__) || \
- defined(__arm__)
- /* align rx buffers to 2 bytes so that IP header is aligned */
-# define rx_align(skb) skb_reserve((skb), 2)
-# define RxFD_ALIGNMENT __attribute__ ((aligned (2), packed))
-#else
-# define rx_align(skb)
-# define RxFD_ALIGNMENT
-#endif
-
-/* Set the copy breakpoint for the copy-only-tiny-buffer Rx method.
- Lower values use more memory, but are faster. */
-static int rx_copybreak = 200;
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
-
-/* Maximum number of multicast addresses to filter (vs. rx-all-multicast) */
-static int multicast_filter_limit = 64;
-
-/* 'options' is used to pass a transceiver override or full-duplex flag
- e.g. "options=16" for FD, "options=32" for 100mbps-only. */
-static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-
-/* A few values that may be tweaked. */
-/* The ring sizes should be a power of two for efficiency. */
-#define TX_RING_SIZE 64
-#define RX_RING_SIZE 64
-/* How much slots multicast filter setup may take.
- Do not descrease without changing set_rx_mode() implementaion. */
-#define TX_MULTICAST_SIZE 2
-#define TX_MULTICAST_RESERV (TX_MULTICAST_SIZE*2)
-/* Actual number of TX packets queued, must be
- <= TX_RING_SIZE-TX_MULTICAST_RESERV. */
-#define TX_QUEUE_LIMIT (TX_RING_SIZE-TX_MULTICAST_RESERV)
-/* Hysteresis marking queue as no longer full. */
-#define TX_QUEUE_UNFULL (TX_QUEUE_LIMIT-4)
-
-/* Operational parameters that usually are not changed. */
-
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT (2*HZ)
-/* Size of an pre-allocated Rx buffer: <Ethernet MTU> + slack.*/
-#define PKT_BUF_SZ 1536
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/mii.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/irq.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/rtnetlink.h>
-#include <linux/skbuff.h>
-#include <linux/ethtool.h>
-
-static int use_io;
-static int debug = -1;
-#define DEBUG_DEFAULT (NETIF_MSG_DRV | \
- NETIF_MSG_HW | \
- NETIF_MSG_RX_ERR | \
- NETIF_MSG_TX_ERR)
-#define DEBUG ((debug >= 0) ? (1<<debug)-1 : DEBUG_DEFAULT)
-
-
-MODULE_AUTHOR("Maintainer: Andrey V. Savochkin <saw@....sw.com.sg>");
-MODULE_DESCRIPTION("Intel i82557/i82558/i82559 PCI EtherExpressPro driver");
-MODULE_LICENSE("GPL");
-module_param(use_io, int, 0);
-module_param(debug, int, 0);
-module_param_array(options, int, NULL, 0);
-module_param_array(full_duplex, int, NULL, 0);
-module_param(congenb, int, 0);
-module_param(txfifo, int, 0);
-module_param(rxfifo, int, 0);
-module_param(txdmacount, int, 0);
-module_param(rxdmacount, int, 0);
-module_param(rx_copybreak, int, 0);
-module_param(max_interrupt_work, int, 0);
-module_param(multicast_filter_limit, int, 0);
-MODULE_PARM_DESC(debug, "debug level (0-6)");
-MODULE_PARM_DESC(options, "Bits 0-3: transceiver type, bit 4: full duplex, bit 5: 100Mbps");
-MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)");
-MODULE_PARM_DESC(congenb, "Enable congestion control (1)");
-MODULE_PARM_DESC(txfifo, "Tx FIFO threshold in 4 byte units, (0-15)");
-MODULE_PARM_DESC(rxfifo, "Rx FIFO threshold in 4 byte units, (0-15)");
-MODULE_PARM_DESC(txdmacount, "Tx DMA burst length; 128 - disable (0-128)");
-MODULE_PARM_DESC(rxdmacount, "Rx DMA burst length; 128 - disable (0-128)");
-MODULE_PARM_DESC(rx_copybreak, "copy breakpoint for copy-only-tiny-frames");
-MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
-MODULE_PARM_DESC(multicast_filter_limit, "maximum number of filtered multicast addresses");
-
-#define RUN_AT(x) (jiffies + (x))
-
-#define netdevice_start(dev)
-#define netdevice_stop(dev)
-#define netif_set_tx_timeout(dev, tf, tm) \
- do { \
- (dev)->tx_timeout = (tf); \
- (dev)->watchdog_timeo = (tm); \
- } while(0)
-
-
-
-/*
- Theory of Operation
-
-I. Board Compatibility
-
-This device driver is designed for the Intel i82557 "Speedo3" chip, Intel's
-single-chip fast Ethernet controller for PCI, as used on the Intel
-EtherExpress Pro 100 adapter.
-
-II. Board-specific settings
-
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board. The system BIOS should be set to assign the
-PCI INTA signal to an otherwise unused system IRQ line. While it's
-possible to share PCI interrupt lines, it negatively impacts performance and
-only recent kernels support it.
-
-III. Driver operation
-
-IIIA. General
-The Speedo3 is very similar to other Intel network chips, that is to say
-"apparently designed on a different planet". This chips retains the complex
-Rx and Tx descriptors and multiple buffers pointers as previous chips, but
-also has simplified Tx and Rx buffer modes. This driver uses the "flexible"
-Tx mode, but in a simplified lower-overhead manner: it associates only a
-single buffer descriptor with each frame descriptor.
-
-Despite the extra space overhead in each receive skbuff, the driver must use
-the simplified Rx buffer mode to assure that only a single data buffer is
-associated with each RxFD. The driver implements this by reserving space
-for the Rx descriptor at the head of each Rx skbuff.
-
-The Speedo-3 has receive and command unit base addresses that are added to
-almost all descriptor pointers. The driver sets these to zero, so that all
-pointer fields are absolute addresses.
-
-The System Control Block (SCB) of some previous Intel chips exists on the
-chip in both PCI I/O and memory space. This driver uses the I/O space
-registers, but might switch to memory mapped mode to better support non-x86
-processors.
-
-IIIB. Transmit structure
-
-The driver must use the complex Tx command+descriptor mode in order to
-have a indirect pointer to the skbuff data section. Each Tx command block
-(TxCB) is associated with two immediately appended Tx Buffer Descriptor
-(TxBD). A fixed ring of these TxCB+TxBD pairs are kept as part of the
-speedo_private data structure for each adapter instance.
-
-The newer i82558 explicitly supports this structure, and can read the two
-TxBDs in the same PCI burst as the TxCB.
-
-This ring structure is used for all normal transmit packets, but the
-transmit packet descriptors aren't long enough for most non-Tx commands such
-as CmdConfigure. This is complicated by the possibility that the chip has
-already loaded the link address in the previous descriptor. So for these
-commands we convert the next free descriptor on the ring to a NoOp, and point
-that descriptor's link to the complex command.
-
-An additional complexity of these non-transmit commands are that they may be
-added asynchronous to the normal transmit queue, so we disable interrupts
-whenever the Tx descriptor ring is manipulated.
-
-A notable aspect of these special configure commands is that they do
-work with the normal Tx ring entry scavenge method. The Tx ring scavenge
-is done at interrupt time using the 'dirty_tx' index, and checking for the
-command-complete bit. While the setup frames may have the NoOp command on the
-Tx ring marked as complete, but not have completed the setup command, this
-is not a problem. The tx_ring entry can be still safely reused, as the
-tx_skbuff[] entry is always empty for config_cmd and mc_setup frames.
-
-Commands may have bits set e.g. CmdSuspend in the command word to either
-suspend or stop the transmit/command unit. This driver always flags the last
-command with CmdSuspend, erases the CmdSuspend in the previous command, and
-then issues a CU_RESUME.
-Note: Watch out for the potential race condition here: imagine
- erasing the previous suspend
- the chip processes the previous command
- the chip processes the final command, and suspends
- doing the CU_RESUME
- the chip processes the next-yet-valid post-final-command.
-So blindly sending a CU_RESUME is only safe if we do it immediately after
-after erasing the previous CmdSuspend, without the possibility of an
-intervening delay. Thus the resume command is always within the
-interrupts-disabled region. This is a timing dependence, but handling this
-condition in a timing-independent way would considerably complicate the code.
-
-Note: In previous generation Intel chips, restarting the command unit was a
-notoriously slow process. This is presumably no longer true.
-
-IIIC. Receive structure
-
-Because of the bus-master support on the Speedo3 this driver uses the new
-SKBUFF_RX_COPYBREAK scheme, rather than a fixed intermediate receive buffer.
-This scheme allocates full-sized skbuffs as receive buffers. The value
-SKBUFF_RX_COPYBREAK is used as the copying breakpoint: it is chosen to
-trade-off the memory wasted by passing the full-sized skbuff to the queue
-layer for all frames vs. the copying cost of copying a frame to a
-correctly-sized skbuff.
-
-For small frames the copying cost is negligible (esp. considering that we
-are pre-loading the cache with immediately useful header information), so we
-allocate a new, minimally-sized skbuff. For large frames the copying cost
-is non-trivial, and the larger copy might flush the cache of useful data, so
-we pass up the skbuff the packet was received into.
-
-IV. Notes
-
-Thanks to Steve Williams of Intel for arranging the non-disclosure agreement
-that stated that I could disclose the information. But I still resent
-having to sign an Intel NDA when I'm helping Intel sell their own product!
-
-*/
-
-static int speedo_found1(struct pci_dev *pdev, void __iomem *ioaddr, int fnd_cnt, int acpi_idle_state);
-
-/* Offsets to the various registers.
- All accesses need not be longword aligned. */
-enum speedo_offsets {
- SCBStatus = 0, SCBCmd = 2, /* Rx/Command Unit command and status. */
- SCBIntmask = 3,
- SCBPointer = 4, /* General purpose pointer. */
- SCBPort = 8, /* Misc. commands and operands. */
- SCBflash = 12, SCBeeprom = 14, /* EEPROM and flash memory control. */
- SCBCtrlMDI = 16, /* MDI interface control. */
- SCBEarlyRx = 20, /* Early receive byte count. */
-};
-/* Commands that can be put in a command list entry. */
-enum commands {
- CmdNOp = 0, CmdIASetup = 0x10000, CmdConfigure = 0x20000,
- CmdMulticastList = 0x30000, CmdTx = 0x40000, CmdTDR = 0x50000,
- CmdDump = 0x60000, CmdDiagnose = 0x70000,
- CmdSuspend = 0x40000000, /* Suspend after completion. */
- CmdIntr = 0x20000000, /* Interrupt after completion. */
- CmdTxFlex = 0x00080000, /* Use "Flexible mode" for CmdTx command. */
-};
-/* Clear CmdSuspend (1<<30) avoiding interference with the card access to the
- status bits. Previous driver versions used separate 16 bit fields for
- commands and statuses. --SAW
- */
-#if defined(__alpha__)
-# define clear_suspend(cmd) clear_bit(30, &(cmd)->cmd_status);
-#else
-# if defined(__LITTLE_ENDIAN)
-# define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x4000
-# elif defined(__BIG_ENDIAN)
-# define clear_suspend(cmd) ((__u16 *)&(cmd)->cmd_status)[1] &= ~0x0040
-# else
-# error Unsupported byteorder
-# endif
-#endif
-
-enum SCBCmdBits {
- SCBMaskCmdDone=0x8000, SCBMaskRxDone=0x4000, SCBMaskCmdIdle=0x2000,
- SCBMaskRxSuspend=0x1000, SCBMaskEarlyRx=0x0800, SCBMaskFlowCtl=0x0400,
- SCBTriggerIntr=0x0200, SCBMaskAll=0x0100,
- /* The rest are Rx and Tx commands. */
- CUStart=0x0010, CUResume=0x0020, CUStatsAddr=0x0040, CUShowStats=0x0050,
- CUCmdBase=0x0060, /* CU Base address (set to zero) . */
- CUDumpStats=0x0070, /* Dump then reset stats counters. */
- RxStart=0x0001, RxResume=0x0002, RxAbort=0x0004, RxAddrLoad=0x0006,
- RxResumeNoResources=0x0007,
-};
-
-enum SCBPort_cmds {
- PortReset=0, PortSelfTest=1, PortPartialReset=2, PortDump=3,
-};
-
-/* The Speedo3 Rx and Tx frame/buffer descriptors. */
-struct descriptor { /* A generic descriptor. */
- volatile s32 cmd_status; /* All command and status fields. */
- u32 link; /* struct descriptor * */
- unsigned char params[0];
-};
-
-/* The Speedo3 Rx and Tx buffer descriptors. */
-struct RxFD { /* Receive frame descriptor. */
- volatile s32 status;
- u32 link; /* struct RxFD * */
- u32 rx_buf_addr; /* void * */
- u32 count;
-} RxFD_ALIGNMENT;
-
-/* Selected elements of the Tx/RxFD.status word. */
-enum RxFD_bits {
- RxComplete=0x8000, RxOK=0x2000,
- RxErrCRC=0x0800, RxErrAlign=0x0400, RxErrTooBig=0x0200, RxErrSymbol=0x0010,
- RxEth2Type=0x0020, RxNoMatch=0x0004, RxNoIAMatch=0x0002,
- TxUnderrun=0x1000, StatusComplete=0x8000,
-};
-
-#define CONFIG_DATA_SIZE 22
-struct TxFD { /* Transmit frame descriptor set. */
- s32 status;
- u32 link; /* void * */
- u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */
- s32 count; /* # of TBD (=1), Tx start thresh., etc. */
- /* This constitutes two "TBD" entries -- we only use one. */
-#define TX_DESCR_BUF_OFFSET 16
- u32 tx_buf_addr0; /* void *, frame to be transmitted. */
- s32 tx_buf_size0; /* Length of Tx frame. */
- u32 tx_buf_addr1; /* void *, frame to be transmitted. */
- s32 tx_buf_size1; /* Length of Tx frame. */
- /* the structure must have space for at least CONFIG_DATA_SIZE starting
- * from tx_desc_addr field */
-};
-
-/* Multicast filter setting block. --SAW */
-struct speedo_mc_block {
- struct speedo_mc_block *next;
- unsigned int tx;
- dma_addr_t frame_dma;
- unsigned int len;
- struct descriptor frame __attribute__ ((__aligned__(16)));
-};
-
-/* Elements of the dump_statistics block. This block must be lword aligned. */
-struct speedo_stats {
- u32 tx_good_frames;
- u32 tx_coll16_errs;
- u32 tx_late_colls;
- u32 tx_underruns;
- u32 tx_lost_carrier;
- u32 tx_deferred;
- u32 tx_one_colls;
- u32 tx_multi_colls;
- u32 tx_total_colls;
- u32 rx_good_frames;
- u32 rx_crc_errs;
- u32 rx_align_errs;
- u32 rx_resource_errs;
- u32 rx_overrun_errs;
- u32 rx_colls_errs;
- u32 rx_runt_errs;
- u32 done_marker;
-};
-
-enum Rx_ring_state_bits {
- RrNoMem=1, RrPostponed=2, RrNoResources=4, RrOOMReported=8,
-};
-
-/* Do not change the position (alignment) of the first few elements!
- The later elements are grouped for cache locality.
-
- Unfortunately, all the positions have been shifted since there.
- A new re-alignment is required. 2000/03/06 SAW */
-struct speedo_private {
- void __iomem *regs;
- struct TxFD *tx_ring; /* Commands (usually CmdTxPacket). */
- struct RxFD *rx_ringp[RX_RING_SIZE]; /* Rx descriptor, used as ring. */
- /* The addresses of a Tx/Rx-in-place packets/buffers. */
- struct sk_buff *tx_skbuff[TX_RING_SIZE];
- struct sk_buff *rx_skbuff[RX_RING_SIZE];
- /* Mapped addresses of the rings. */
- dma_addr_t tx_ring_dma;
-#define TX_RING_ELEM_DMA(sp, n) ((sp)->tx_ring_dma + (n)*sizeof(struct TxFD))
- dma_addr_t rx_ring_dma[RX_RING_SIZE];
- struct descriptor *last_cmd; /* Last command sent. */
- unsigned int cur_tx, dirty_tx; /* The ring entries to be free()ed. */
- spinlock_t lock; /* Group with Tx control cache line. */
- u32 tx_threshold; /* The value for txdesc.count. */
- struct RxFD *last_rxf; /* Last filled RX buffer. */
- dma_addr_t last_rxf_dma;
- unsigned int cur_rx, dirty_rx; /* The next free ring entry */
- long last_rx_time; /* Last Rx, in jiffies, to handle Rx hang. */
- struct net_device_stats stats;
- struct speedo_stats *lstats;
- dma_addr_t lstats_dma;
- int chip_id;
- struct pci_dev *pdev;
- struct timer_list timer; /* Media selection timer. */
- struct speedo_mc_block *mc_setup_head; /* Multicast setup frame list head. */
- struct speedo_mc_block *mc_setup_tail; /* Multicast setup frame list tail. */
- long in_interrupt; /* Word-aligned dev->interrupt */
- unsigned char acpi_pwr;
- signed char rx_mode; /* Current PROMISC/ALLMULTI setting. */
- unsigned int tx_full:1; /* The Tx queue is full. */
- unsigned int flow_ctrl:1; /* Use 802.3x flow control. */
- unsigned int rx_bug:1; /* Work around receiver hang errata. */
- unsigned char default_port:8; /* Last dev->if_port value. */
- unsigned char rx_ring_state; /* RX ring status flags. */
- unsigned short phy[2]; /* PHY media interfaces available. */
- unsigned short partner; /* Link partner caps. */
- struct mii_if_info mii_if; /* MII API hooks, info */
- u32 msg_enable; /* debug message level */
-};
-
-/* The parameters for a CmdConfigure operation.
- There are so many options that it would be difficult to document each bit.
- We mostly use the default or recommended settings. */
-static const char i82557_config_cmd[CONFIG_DATA_SIZE] = {
- 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */
- 0, 0x2E, 0, 0x60, 0,
- 0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */
- 0x3f, 0x05, };
-static const char i82558_config_cmd[CONFIG_DATA_SIZE] = {
- 22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */
- 0, 0x2E, 0, 0x60, 0x08, 0x88,
- 0x68, 0, 0x40, 0xf2, 0x84, /* Disable FC */
- 0x31, 0x05, };
-
-/* PHY media interface chips. */
-static const char * const phys[] = {
- "None", "i82553-A/B", "i82553-C", "i82503",
- "DP83840", "80c240", "80c24", "i82555",
- "unknown-8", "unknown-9", "DP83840A", "unknown-11",
- "unknown-12", "unknown-13", "unknown-14", "unknown-15", };
-enum phy_chips { NonSuchPhy=0, I82553AB, I82553C, I82503, DP83840, S80C240,
- S80C24, I82555, DP83840A=10, };
-static const char is_mii[] = { 0, 1, 1, 0, 1, 1, 0, 1 };
-#define EE_READ_CMD (6)
-
-static int eepro100_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent);
-
-static int do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len);
-static int mdio_read(struct net_device *dev, int phy_id, int location);
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
-static int speedo_open(struct net_device *dev);
-static void speedo_resume(struct net_device *dev);
-static void speedo_timer(unsigned long data);
-static void speedo_init_rx_ring(struct net_device *dev);
-static void speedo_tx_timeout(struct net_device *dev);
-static int speedo_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static void speedo_refill_rx_buffers(struct net_device *dev, int force);
-static int speedo_rx(struct net_device *dev);
-static void speedo_tx_buffer_gc(struct net_device *dev);
-static irqreturn_t speedo_interrupt(int irq, void *dev_instance);
-static int speedo_close(struct net_device *dev);
-static struct net_device_stats *speedo_get_stats(struct net_device *dev);
-static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void set_rx_mode(struct net_device *dev);
-static void speedo_show_state(struct net_device *dev);
-static const struct ethtool_ops ethtool_ops;
-
-
-
-#ifdef honor_default_port
-/* Optional driver feature to allow forcing the transceiver setting.
- Not recommended. */
-static int mii_ctrl[8] = { 0x3300, 0x3100, 0x0000, 0x0100,
- 0x2000, 0x2100, 0x0400, 0x3100};
-#endif
-
-/* How to wait for the command unit to accept a command.
- Typically this takes 0 ticks. */
-static inline unsigned char wait_for_cmd_done(struct net_device *dev,
- struct speedo_private *sp)
-{
- int wait = 1000;
- void __iomem *cmd_ioaddr = sp->regs + SCBCmd;
- unsigned char r;
-
- do {
- udelay(1);
- r = ioread8(cmd_ioaddr);
- } while(r && --wait >= 0);
-
- if (wait < 0)
- printk(KERN_ALERT "%s: wait_for_cmd_done timeout!\n", dev->name);
- return r;
-}
-
-static int __devinit eepro100_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- void __iomem *ioaddr;
- int irq, pci_bar;
- int acpi_idle_state = 0, pm;
- static int cards_found /* = 0 */;
- unsigned long pci_base;
-
-#ifndef MODULE
- /* when built-in, we only print version if device is found */
- static int did_version;
- if (did_version++ == 0)
- printk(version);
-#endif
-
- /* save power state before pci_enable_device overwrites it */
- pm = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pm) {
- u16 pwr_command;
- pci_read_config_word(pdev, pm + PCI_PM_CTRL, &pwr_command);
- acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
- }
-
- if (pci_enable_device(pdev))
- goto err_out_free_mmio_region;
-
- pci_set_master(pdev);
-
- if (!request_region(pci_resource_start(pdev, 1),
- pci_resource_len(pdev, 1), "eepro100")) {
- dev_err(&pdev->dev, "eepro100: cannot reserve I/O ports\n");
- goto err_out_none;
- }
- if (!request_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0), "eepro100")) {
- dev_err(&pdev->dev, "eepro100: cannot reserve MMIO region\n");
- goto err_out_free_pio_region;
- }
-
- irq = pdev->irq;
- pci_bar = use_io ? 1 : 0;
- pci_base = pci_resource_start(pdev, pci_bar);
- if (DEBUG & NETIF_MSG_PROBE)
- printk("Found Intel i82557 PCI Speedo at %#lx, IRQ %d.\n",
- pci_base, irq);
-
- ioaddr = pci_iomap(pdev, pci_bar, 0);
- if (!ioaddr) {
- dev_err(&pdev->dev, "eepro100: cannot remap IO\n");
- goto err_out_free_mmio_region;
- }
-
- if (speedo_found1(pdev, ioaddr, cards_found, acpi_idle_state) == 0)
- cards_found++;
- else
- goto err_out_iounmap;
-
- return 0;
-
-err_out_iounmap: ;
- pci_iounmap(pdev, ioaddr);
-err_out_free_mmio_region:
- release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
-err_out_free_pio_region:
- release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
-err_out_none:
- return -ENODEV;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-
-static void poll_speedo (struct net_device *dev)
-{
- /* disable_irq is not very nice, but with the funny lockless design
- we have no other choice. */
- disable_irq(dev->irq);
- speedo_interrupt (dev->irq, dev);
- enable_irq(dev->irq);
-}
-#endif
-
-static int __devinit speedo_found1(struct pci_dev *pdev,
- void __iomem *ioaddr, int card_idx, int acpi_idle_state)
-{
- struct net_device *dev;
- struct speedo_private *sp;
- const char *product;
- int i, option;
- u16 eeprom[0x100];
- int size;
- void *tx_ring_space;
- dma_addr_t tx_ring_dma;
-
- size = TX_RING_SIZE * sizeof(struct TxFD) + sizeof(struct speedo_stats);
- tx_ring_space = pci_alloc_consistent(pdev, size, &tx_ring_dma);
- if (tx_ring_space == NULL)
- return -1;
-
- dev = alloc_etherdev(sizeof(struct speedo_private));
- if (dev == NULL) {
- printk(KERN_ERR "eepro100: Could not allocate ethernet device.\n");
- pci_free_consistent(pdev, size, tx_ring_space, tx_ring_dma);
- return -1;
- }
-
- SET_MODULE_OWNER(dev);
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- if (dev->mem_start > 0)
- option = dev->mem_start;
- else if (card_idx >= 0 && options[card_idx] >= 0)
- option = options[card_idx];
- else
- option = 0;
-
- rtnl_lock();
- if (dev_alloc_name(dev, dev->name) < 0)
- goto err_free_unlock;
-
- /* Read the station address EEPROM before doing the reset.
- Nominally his should even be done before accepting the device, but
- then we wouldn't have a device name with which to report the error.
- The size test is for 6 bit vs. 8 bit address serial EEPROMs.
- */
- {
- void __iomem *iobase;
- int read_cmd, ee_size;
- u16 sum;
- int j;
-
- /* Use IO only to avoid postponed writes and satisfy EEPROM timing
- requirements. */
- iobase = pci_iomap(pdev, 1, pci_resource_len(pdev, 1));
- if (!iobase)
- goto err_free_unlock;
- if ((do_eeprom_cmd(iobase, EE_READ_CMD << 24, 27) & 0xffe0000)
- == 0xffe0000) {
- ee_size = 0x100;
- read_cmd = EE_READ_CMD << 24;
- } else {
- ee_size = 0x40;
- read_cmd = EE_READ_CMD << 22;
- }
-
- for (j = 0, i = 0, sum = 0; i < ee_size; i++) {
- u16 value = do_eeprom_cmd(iobase, read_cmd | (i << 16), 27);
- eeprom[i] = value;
- sum += value;
- if (i < 3) {
- dev->dev_addr[j++] = value;
- dev->dev_addr[j++] = value >> 8;
- }
- }
- if (sum != 0xBABA)
- printk(KERN_WARNING "%s: Invalid EEPROM checksum %#4.4x, "
- "check settings before activating this device!\n",
- dev->name, sum);
- /* Don't unregister_netdev(dev); as the EEPro may actually be
- usable, especially if the MAC address is set later.
- On the other hand, it may be unusable if MDI data is corrupted. */
-
- pci_iounmap(pdev, iobase);
- }
-
- /* Reset the chip: stop Tx and Rx processes and clear counters.
- This takes less than 10usec and will easily finish before the next
- action. */
- iowrite32(PortReset, ioaddr + SCBPort);
- ioread32(ioaddr + SCBPort);
- udelay(10);
-
- if (eeprom[3] & 0x0100)
- product = "OEM i82557/i82558 10/100 Ethernet";
- else
- product = pci_name(pdev);
-
- printk(KERN_INFO "%s: %s, ", dev->name, product);
-
- for (i = 0; i < 5; i++)
- printk("%2.2X:", dev->dev_addr[i]);
- printk("%2.2X, ", dev->dev_addr[i]);
- printk("IRQ %d.\n", pdev->irq);
-
- sp = netdev_priv(dev);
-
- /* we must initialize this early, for mdio_{read,write} */
- sp->regs = ioaddr;
-
-#if 1 || defined(kernel_bloat)
- /* OK, this is pure kernel bloat. I don't like it when other drivers
- waste non-pageable kernel space to emit similar messages, but I need
- them for bug reports. */
- {
- const char *connectors[] = {" RJ45", " BNC", " AUI", " MII"};
- /* The self-test results must be paragraph aligned. */
- volatile s32 *self_test_results;
- int boguscnt = 16000; /* Timeout for set-test. */
- if ((eeprom[3] & 0x03) != 0x03)
- printk(KERN_INFO " Receiver lock-up bug exists -- enabling"
- " work-around.\n");
- printk(KERN_INFO " Board assembly %4.4x%2.2x-%3.3d, Physical"
- " connectors present:",
- eeprom[8], eeprom[9]>>8, eeprom[9] & 0xff);
- for (i = 0; i < 4; i++)
- if (eeprom[5] & (1<<i))
- printk(connectors[i]);
- printk("\n"KERN_INFO" Primary interface chip %s PHY #%d.\n",
- phys[(eeprom[6]>>8)&15], eeprom[6] & 0x1f);
- if (eeprom[7] & 0x0700)
- printk(KERN_INFO " Secondary interface chip %s.\n",
- phys[(eeprom[7]>>8)&7]);
- if (((eeprom[6]>>8) & 0x3f) == DP83840
- || ((eeprom[6]>>8) & 0x3f) == DP83840A) {
- int mdi_reg23 = mdio_read(dev, eeprom[6] & 0x1f, 23) | 0x0422;
- if (congenb)
- mdi_reg23 |= 0x0100;
- printk(KERN_INFO" DP83840 specific setup, setting register 23 to %4.4x.\n",
- mdi_reg23);
- mdio_write(dev, eeprom[6] & 0x1f, 23, mdi_reg23);
- }
- if ((option >= 0) && (option & 0x70)) {
- printk(KERN_INFO " Forcing %dMbs %s-duplex operation.\n",
- (option & 0x20 ? 100 : 10),
- (option & 0x10 ? "full" : "half"));
- mdio_write(dev, eeprom[6] & 0x1f, MII_BMCR,
- ((option & 0x20) ? 0x2000 : 0) | /* 100mbps? */
- ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
- }
-
- /* Perform a system self-test. */
- self_test_results = (s32*) ((((long) tx_ring_space) + 15) & ~0xf);
- self_test_results[0] = 0;
- self_test_results[1] = -1;
- iowrite32(tx_ring_dma | PortSelfTest, ioaddr + SCBPort);
- do {
- udelay(10);
- } while (self_test_results[1] == -1 && --boguscnt >= 0);
-
- if (boguscnt < 0) { /* Test optimized out. */
- printk(KERN_ERR "Self test failed, status %8.8x:\n"
- KERN_ERR " Failure to initialize the i82557.\n"
- KERN_ERR " Verify that the card is a bus-master"
- " capable slot.\n",
- self_test_results[1]);
- } else
- printk(KERN_INFO " General self-test: %s.\n"
- KERN_INFO " Serial sub-system self-test: %s.\n"
- KERN_INFO " Internal registers self-test: %s.\n"
- KERN_INFO " ROM checksum self-test: %s (%#8.8x).\n",
- self_test_results[1] & 0x1000 ? "failed" : "passed",
- self_test_results[1] & 0x0020 ? "failed" : "passed",
- self_test_results[1] & 0x0008 ? "failed" : "passed",
- self_test_results[1] & 0x0004 ? "failed" : "passed",
- self_test_results[0]);
- }
-#endif /* kernel_bloat */
-
- iowrite32(PortReset, ioaddr + SCBPort);
- ioread32(ioaddr + SCBPort);
- udelay(10);
-
- /* Return the chip to its original power state. */
- pci_set_power_state(pdev, acpi_idle_state);
-
- pci_set_drvdata (pdev, dev);
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- dev->irq = pdev->irq;
-
- sp->pdev = pdev;
- sp->msg_enable = DEBUG;
- sp->acpi_pwr = acpi_idle_state;
- sp->tx_ring = tx_ring_space;
- sp->tx_ring_dma = tx_ring_dma;
- sp->lstats = (struct speedo_stats *)(sp->tx_ring + TX_RING_SIZE);
- sp->lstats_dma = TX_RING_ELEM_DMA(sp, TX_RING_SIZE);
- init_timer(&sp->timer); /* used in ioctl() */
- spin_lock_init(&sp->lock);
-
- sp->mii_if.full_duplex = option >= 0 && (option & 0x10) ? 1 : 0;
- if (card_idx >= 0) {
- if (full_duplex[card_idx] >= 0)
- sp->mii_if.full_duplex = full_duplex[card_idx];
- }
- sp->default_port = option >= 0 ? (option & 0x0f) : 0;
-
- sp->phy[0] = eeprom[6];
- sp->phy[1] = eeprom[7];
-
- sp->mii_if.phy_id = eeprom[6] & 0x1f;
- sp->mii_if.phy_id_mask = 0x1f;
- sp->mii_if.reg_num_mask = 0x1f;
- sp->mii_if.dev = dev;
- sp->mii_if.mdio_read = mdio_read;
- sp->mii_if.mdio_write = mdio_write;
-
- sp->rx_bug = (eeprom[3] & 0x03) == 3 ? 0 : 1;
- if (((pdev->device > 0x1030 && (pdev->device < 0x103F)))
- || (pdev->device == 0x2449) || (pdev->device == 0x2459)
- || (pdev->device == 0x245D)) {
- sp->chip_id = 1;
- }
-
- if (sp->rx_bug)
- printk(KERN_INFO " Receiver lock-up workaround activated.\n");
-
- /* The Speedo-specific entries in the device structure. */
- dev->open = &speedo_open;
- dev->hard_start_xmit = &speedo_start_xmit;
- netif_set_tx_timeout(dev, &speedo_tx_timeout, TX_TIMEOUT);
- dev->stop = &speedo_close;
- dev->get_stats = &speedo_get_stats;
- dev->set_multicast_list = &set_rx_mode;
- dev->do_ioctl = &speedo_ioctl;
- SET_ETHTOOL_OPS(dev, ðtool_ops);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = &poll_speedo;
-#endif
-
- if (register_netdevice(dev))
- goto err_free_unlock;
- rtnl_unlock();
-
- return 0;
-
- err_free_unlock:
- rtnl_unlock();
- free_netdev(dev);
- return -1;
-}
-
-static void do_slow_command(struct net_device *dev, struct speedo_private *sp, int cmd)
-{
- void __iomem *cmd_ioaddr = sp->regs + SCBCmd;
- int wait = 0;
- do
- if (ioread8(cmd_ioaddr) == 0) break;
- while(++wait <= 200);
- if (wait > 100)
- printk(KERN_ERR "Command %4.4x never accepted (%d polls)!\n",
- ioread8(cmd_ioaddr), wait);
-
- iowrite8(cmd, cmd_ioaddr);
-
- for (wait = 0; wait <= 100; wait++)
- if (ioread8(cmd_ioaddr) == 0) return;
- for (; wait <= 20000; wait++)
- if (ioread8(cmd_ioaddr) == 0) return;
- else udelay(1);
- printk(KERN_ERR "Command %4.4x was not accepted after %d polls!"
- " Current status %8.8x.\n",
- cmd, wait, ioread32(sp->regs + SCBStatus));
-}
-
-/* Serial EEPROM section.
- A "bit" grungy, but we work our way through bit-by-bit :->. */
-/* EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
-#define EE_CS 0x02 /* EEPROM chip select. */
-#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
-#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
-#define EE_ENB (0x4800 | EE_CS)
-#define EE_WRITE_0 0x4802
-#define EE_WRITE_1 0x4806
-#define EE_OFFSET SCBeeprom
-
-/* The fixes for the code were kindly provided by Dragan Stancevic
- <visitor@...inux.com> to strictly follow Intel specifications of EEPROM
- access timing.
- The publicly available sheet 64486302 (sec. 3.1) specifies 1us access
- interval for serial EEPROM. However, it looks like that there is an
- additional requirement dictating larger udelay's in the code below.
- 2000/05/24 SAW */
-static int __devinit do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len)
-{
- unsigned retval = 0;
- void __iomem *ee_addr = ioaddr + SCBeeprom;
-
- iowrite16(EE_ENB, ee_addr); udelay(2);
- iowrite16(EE_ENB | EE_SHIFT_CLK, ee_addr); udelay(2);
-
- /* Shift the command bits out. */
- do {
- short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
- iowrite16(dataval, ee_addr); udelay(2);
- iowrite16(dataval | EE_SHIFT_CLK, ee_addr); udelay(2);
- retval = (retval << 1) | ((ioread16(ee_addr) & EE_DATA_READ) ? 1 : 0);
- } while (--cmd_len >= 0);
- iowrite16(EE_ENB, ee_addr); udelay(2);
-
- /* Terminate the EEPROM access. */
- iowrite16(EE_ENB & ~EE_CS, ee_addr);
- return retval;
-}
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
- iowrite32(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI);
- do {
- val = ioread32(ioaddr + SCBCtrlMDI);
- if (--boguscnt < 0) {
- printk(KERN_ERR " mdio_read() timed out with val = %8.8x.\n", val);
- break;
- }
- } while (! (val & 0x10000000));
- return val & 0xffff;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */
- iowrite32(0x04000000 | (location<<16) | (phy_id<<21) | value,
- ioaddr + SCBCtrlMDI);
- do {
- val = ioread32(ioaddr + SCBCtrlMDI);
- if (--boguscnt < 0) {
- printk(KERN_ERR" mdio_write() timed out with val = %8.8x.\n", val);
- break;
- }
- } while (! (val & 0x10000000));
-}
-
-static int
-speedo_open(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- int retval;
-
- if (netif_msg_ifup(sp))
- printk(KERN_DEBUG "%s: speedo_open() irq %d.\n", dev->name, dev->irq);
-
- pci_set_power_state(sp->pdev, PCI_D0);
-
- /* Set up the Tx queue early.. */
- sp->cur_tx = 0;
- sp->dirty_tx = 0;
- sp->last_cmd = NULL;
- sp->tx_full = 0;
- sp->in_interrupt = 0;
-
- /* .. we can safely take handler calls during init. */
- retval = request_irq(dev->irq, &speedo_interrupt, IRQF_SHARED, dev->name, dev);
- if (retval) {
- return retval;
- }
-
- dev->if_port = sp->default_port;
-
-#ifdef oh_no_you_dont_unless_you_honour_the_options_passed_in_to_us
- /* Retrigger negotiation to reset previous errors. */
- if ((sp->phy[0] & 0x8000) == 0) {
- int phy_addr = sp->phy[0] & 0x1f ;
- /* Use 0x3300 for restarting NWay, other values to force xcvr:
- 0x0000 10-HD
- 0x0100 10-FD
- 0x2000 100-HD
- 0x2100 100-FD
- */
-#ifdef honor_default_port
- mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]);
-#else
- mdio_write(dev, phy_addr, MII_BMCR, 0x3300);
-#endif
- }
-#endif
-
- speedo_init_rx_ring(dev);
-
- /* Fire up the hardware. */
- iowrite16(SCBMaskAll, ioaddr + SCBCmd);
- speedo_resume(dev);
-
- netdevice_start(dev);
- netif_start_queue(dev);
-
- /* Setup the chip and configure the multicast list. */
- sp->mc_setup_head = NULL;
- sp->mc_setup_tail = NULL;
- sp->flow_ctrl = sp->partner = 0;
- sp->rx_mode = -1; /* Invalid -> always reset the mode. */
- set_rx_mode(dev);
- if ((sp->phy[0] & 0x8000) == 0)
- sp->mii_if.advertising = mdio_read(dev, sp->phy[0] & 0x1f, MII_ADVERTISE);
-
- mii_check_link(&sp->mii_if);
-
- if (netif_msg_ifup(sp)) {
- printk(KERN_DEBUG "%s: Done speedo_open(), status %8.8x.\n",
- dev->name, ioread16(ioaddr + SCBStatus));
- }
-
- /* Set the timer. The timer serves a dual purpose:
- 1) to monitor the media interface (e.g. link beat) and perhaps switch
- to an alternate media type
- 2) to monitor Rx activity, and restart the Rx process if the receiver
- hangs. */
- sp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */
- sp->timer.data = (unsigned long)dev;
- sp->timer.function = &speedo_timer; /* timer handler */
- add_timer(&sp->timer);
-
- /* No need to wait for the command unit to accept here. */
- if ((sp->phy[0] & 0x8000) == 0)
- mdio_read(dev, sp->phy[0] & 0x1f, MII_BMCR);
-
- return 0;
-}
-
-/* Start the chip hardware after a full reset. */
-static void speedo_resume(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
-
- /* Start with a Tx threshold of 256 (0x..20.... 8 byte units). */
- sp->tx_threshold = 0x01208000;
-
- /* Set the segment registers to '0'. */
- if (wait_for_cmd_done(dev, sp) != 0) {
- iowrite32(PortPartialReset, ioaddr + SCBPort);
- udelay(10);
- }
-
- iowrite32(0, ioaddr + SCBPointer);
- ioread32(ioaddr + SCBPointer); /* Flush to PCI. */
- udelay(10); /* Bogus, but it avoids the bug. */
-
- /* Note: these next two operations can take a while. */
- do_slow_command(dev, sp, RxAddrLoad);
- do_slow_command(dev, sp, CUCmdBase);
-
- /* Load the statistics block and rx ring addresses. */
- iowrite32(sp->lstats_dma, ioaddr + SCBPointer);
- ioread32(ioaddr + SCBPointer); /* Flush to PCI */
-
- iowrite8(CUStatsAddr, ioaddr + SCBCmd);
- sp->lstats->done_marker = 0;
- wait_for_cmd_done(dev, sp);
-
- if (sp->rx_ringp[sp->cur_rx % RX_RING_SIZE] == NULL) {
- if (netif_msg_rx_err(sp))
- printk(KERN_DEBUG "%s: NULL cur_rx in speedo_resume().\n",
- dev->name);
- } else {
- iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE],
- ioaddr + SCBPointer);
- ioread32(ioaddr + SCBPointer); /* Flush to PCI */
- }
-
- /* Note: RxStart should complete instantly. */
- do_slow_command(dev, sp, RxStart);
- do_slow_command(dev, sp, CUDumpStats);
-
- /* Fill the first command with our physical address. */
- {
- struct descriptor *ias_cmd;
-
- ias_cmd =
- (struct descriptor *)&sp->tx_ring[sp->cur_tx++ % TX_RING_SIZE];
- /* Avoid a bug(?!) here by marking the command already completed. */
- ias_cmd->cmd_status = cpu_to_le32((CmdSuspend | CmdIASetup) | 0xa000);
- ias_cmd->link =
- cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE));
- memcpy(ias_cmd->params, dev->dev_addr, 6);
- if (sp->last_cmd)
- clear_suspend(sp->last_cmd);
- sp->last_cmd = ias_cmd;
- }
-
- /* Start the chip's Tx process and unmask interrupts. */
- iowrite32(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE),
- ioaddr + SCBPointer);
- /* We are not ACK-ing FCP and ER in the interrupt handler yet so they should
- remain masked --Dragan */
- iowrite16(CUStart | SCBMaskEarlyRx | SCBMaskFlowCtl, ioaddr + SCBCmd);
-}
-
-/*
- * Sometimes the receiver stops making progress. This routine knows how to
- * get it going again, without losing packets or being otherwise nasty like
- * a chip reset would be. Previously the driver had a whole sequence
- * of if RxSuspended, if it's no buffers do one thing, if it's no resources,
- * do another, etc. But those things don't really matter. Separate logic
- * in the ISR provides for allocating buffers--the other half of operation
- * is just making sure the receiver is active. speedo_rx_soft_reset does that.
- * This problem with the old, more involved algorithm is shown up under
- * ping floods on the order of 60K packets/second on a 100Mbps fdx network.
- */
-static void
-speedo_rx_soft_reset(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- struct RxFD *rfd;
- void __iomem *ioaddr;
-
- ioaddr = sp->regs;
- if (wait_for_cmd_done(dev, sp) != 0) {
- printk("%s: previous command stalled\n", dev->name);
- return;
- }
- /*
- * Put the hardware into a known state.
- */
- iowrite8(RxAbort, ioaddr + SCBCmd);
-
- rfd = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE];
-
- rfd->rx_buf_addr = 0xffffffff;
-
- if (wait_for_cmd_done(dev, sp) != 0) {
- printk("%s: RxAbort command stalled\n", dev->name);
- return;
- }
- iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE],
- ioaddr + SCBPointer);
- iowrite8(RxStart, ioaddr + SCBCmd);
-}
-
-
-/* Media monitoring and control. */
-static void speedo_timer(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- int phy_num = sp->phy[0] & 0x1f;
-
- /* We have MII and lost link beat. */
- if ((sp->phy[0] & 0x8000) == 0) {
- int partner = mdio_read(dev, phy_num, MII_LPA);
- if (partner != sp->partner) {
- int flow_ctrl = sp->mii_if.advertising & partner & 0x0400 ? 1 : 0;
- if (netif_msg_link(sp)) {
- printk(KERN_DEBUG "%s: Link status change.\n", dev->name);
- printk(KERN_DEBUG "%s: Old partner %x, new %x, adv %x.\n",
- dev->name, sp->partner, partner, sp->mii_if.advertising);
- }
- sp->partner = partner;
- if (flow_ctrl != sp->flow_ctrl) {
- sp->flow_ctrl = flow_ctrl;
- sp->rx_mode = -1; /* Trigger a reload. */
- }
- }
- }
- mii_check_link(&sp->mii_if);
- if (netif_msg_timer(sp)) {
- printk(KERN_DEBUG "%s: Media control tick, status %4.4x.\n",
- dev->name, ioread16(ioaddr + SCBStatus));
- }
- if (sp->rx_mode < 0 ||
- (sp->rx_bug && jiffies - sp->last_rx_time > 2*HZ)) {
- /* We haven't received a packet in a Long Time. We might have been
- bitten by the receiver hang bug. This can be cleared by sending
- a set multicast list command. */
- if (netif_msg_timer(sp))
- printk(KERN_DEBUG "%s: Sending a multicast list set command"
- " from a timer routine,"
- " m=%d, j=%ld, l=%ld.\n",
- dev->name, sp->rx_mode, jiffies, sp->last_rx_time);
- set_rx_mode(dev);
- }
- /* We must continue to monitor the media. */
- sp->timer.expires = RUN_AT(2*HZ); /* 2.0 sec. */
- add_timer(&sp->timer);
-}
-
-static void speedo_show_state(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- int i;
-
- if (netif_msg_pktdata(sp)) {
- printk(KERN_DEBUG "%s: Tx ring dump, Tx queue %u / %u:\n",
- dev->name, sp->cur_tx, sp->dirty_tx);
- for (i = 0; i < TX_RING_SIZE; i++)
- printk(KERN_DEBUG "%s: %c%c%2d %8.8x.\n", dev->name,
- i == sp->dirty_tx % TX_RING_SIZE ? '*' : ' ',
- i == sp->cur_tx % TX_RING_SIZE ? '=' : ' ',
- i, sp->tx_ring[i].status);
-
- printk(KERN_DEBUG "%s: Printing Rx ring"
- " (next to receive into %u, dirty index %u).\n",
- dev->name, sp->cur_rx, sp->dirty_rx);
- for (i = 0; i < RX_RING_SIZE; i++)
- printk(KERN_DEBUG "%s: %c%c%c%2d %8.8x.\n", dev->name,
- sp->rx_ringp[i] == sp->last_rxf ? 'l' : ' ',
- i == sp->dirty_rx % RX_RING_SIZE ? '*' : ' ',
- i == sp->cur_rx % RX_RING_SIZE ? '=' : ' ',
- i, (sp->rx_ringp[i] != NULL) ?
- (unsigned)sp->rx_ringp[i]->status : 0);
- }
-
-#if 0
- {
- void __iomem *ioaddr = sp->regs;
- int phy_num = sp->phy[0] & 0x1f;
- for (i = 0; i < 16; i++) {
- /* FIXME: what does it mean? --SAW */
- if (i == 6) i = 21;
- printk(KERN_DEBUG "%s: PHY index %d register %d is %4.4x.\n",
- dev->name, phy_num, i, mdio_read(dev, phy_num, i));
- }
- }
-#endif
-
-}
-
-/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void
-speedo_init_rx_ring(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- struct RxFD *rxf, *last_rxf = NULL;
- dma_addr_t last_rxf_dma = 0 /* to shut up the compiler */;
- int i;
-
- sp->cur_rx = 0;
-
- for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb;
- skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
- if (skb)
- rx_align(skb); /* Align IP on 16 byte boundary */
- sp->rx_skbuff[i] = skb;
- if (skb == NULL)
- break; /* OK. Just initially short of Rx bufs. */
- skb->dev = dev; /* Mark as being used by this device. */
- rxf = (struct RxFD *)skb->data;
- sp->rx_ringp[i] = rxf;
- sp->rx_ring_dma[i] =
- pci_map_single(sp->pdev, rxf,
- PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_BIDIRECTIONAL);
- skb_reserve(skb, sizeof(struct RxFD));
- if (last_rxf) {
- last_rxf->link = cpu_to_le32(sp->rx_ring_dma[i]);
- pci_dma_sync_single_for_device(sp->pdev, last_rxf_dma,
- sizeof(struct RxFD), PCI_DMA_TODEVICE);
- }
- last_rxf = rxf;
- last_rxf_dma = sp->rx_ring_dma[i];
- rxf->status = cpu_to_le32(0x00000001); /* '1' is flag value only. */
- rxf->link = 0; /* None yet. */
- /* This field unused by i82557. */
- rxf->rx_buf_addr = 0xffffffff;
- rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
- pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[i],
- sizeof(struct RxFD), PCI_DMA_TODEVICE);
- }
- sp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
- /* Mark the last entry as end-of-list. */
- last_rxf->status = cpu_to_le32(0xC0000002); /* '2' is flag value only. */
- pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[RX_RING_SIZE-1],
- sizeof(struct RxFD), PCI_DMA_TODEVICE);
- sp->last_rxf = last_rxf;
- sp->last_rxf_dma = last_rxf_dma;
-}
-
-static void speedo_purge_tx(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- int entry;
-
- while ((int)(sp->cur_tx - sp->dirty_tx) > 0) {
- entry = sp->dirty_tx % TX_RING_SIZE;
- if (sp->tx_skbuff[entry]) {
- sp->stats.tx_errors++;
- pci_unmap_single(sp->pdev,
- le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0),
- sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
- dev_kfree_skb_irq(sp->tx_skbuff[entry]);
- sp->tx_skbuff[entry] = NULL;
- }
- sp->dirty_tx++;
- }
- while (sp->mc_setup_head != NULL) {
- struct speedo_mc_block *t;
- if (netif_msg_tx_err(sp))
- printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
- pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma,
- sp->mc_setup_head->len, PCI_DMA_TODEVICE);
- t = sp->mc_setup_head->next;
- kfree(sp->mc_setup_head);
- sp->mc_setup_head = t;
- }
- sp->mc_setup_tail = NULL;
- sp->tx_full = 0;
- netif_wake_queue(dev);
-}
-
-static void reset_mii(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
-
- /* Reset the MII transceiver, suggested by Fred Young @ scalable.com. */
- if ((sp->phy[0] & 0x8000) == 0) {
- int phy_addr = sp->phy[0] & 0x1f;
- int advertising = mdio_read(dev, phy_addr, MII_ADVERTISE);
- int mii_bmcr = mdio_read(dev, phy_addr, MII_BMCR);
- mdio_write(dev, phy_addr, MII_BMCR, 0x0400);
- mdio_write(dev, phy_addr, MII_BMSR, 0x0000);
- mdio_write(dev, phy_addr, MII_ADVERTISE, 0x0000);
- mdio_write(dev, phy_addr, MII_BMCR, 0x8000);
-#ifdef honor_default_port
- mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]);
-#else
- mdio_read(dev, phy_addr, MII_BMCR);
- mdio_write(dev, phy_addr, MII_BMCR, mii_bmcr);
- mdio_write(dev, phy_addr, MII_ADVERTISE, advertising);
-#endif
- }
-}
-
-static void speedo_tx_timeout(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- int status = ioread16(ioaddr + SCBStatus);
- unsigned long flags;
-
- if (netif_msg_tx_err(sp)) {
- printk(KERN_WARNING "%s: Transmit timed out: status %4.4x "
- " %4.4x at %d/%d command %8.8x.\n",
- dev->name, status, ioread16(ioaddr + SCBCmd),
- sp->dirty_tx, sp->cur_tx,
- sp->tx_ring[sp->dirty_tx % TX_RING_SIZE].status);
-
- }
- speedo_show_state(dev);
-#if 0
- if ((status & 0x00C0) != 0x0080
- && (status & 0x003C) == 0x0010) {
- /* Only the command unit has stopped. */
- printk(KERN_WARNING "%s: Trying to restart the transmitter...\n",
- dev->name);
- iowrite32(TX_RING_ELEM_DMA(sp, dirty_tx % TX_RING_SIZE]),
- ioaddr + SCBPointer);
- iowrite16(CUStart, ioaddr + SCBCmd);
- reset_mii(dev);
- } else {
-#else
- {
-#endif
- del_timer_sync(&sp->timer);
- /* Reset the Tx and Rx units. */
- iowrite32(PortReset, ioaddr + SCBPort);
- /* We may get spurious interrupts here. But I don't think that they
- may do much harm. 1999/12/09 SAW */
- udelay(10);
- /* Disable interrupts. */
- iowrite16(SCBMaskAll, ioaddr + SCBCmd);
- synchronize_irq(dev->irq);
- speedo_tx_buffer_gc(dev);
- /* Free as much as possible.
- It helps to recover from a hang because of out-of-memory.
- It also simplifies speedo_resume() in case TX ring is full or
- close-to-be full. */
- speedo_purge_tx(dev);
- speedo_refill_rx_buffers(dev, 1);
- spin_lock_irqsave(&sp->lock, flags);
- speedo_resume(dev);
- sp->rx_mode = -1;
- dev->trans_start = jiffies;
- spin_unlock_irqrestore(&sp->lock, flags);
- set_rx_mode(dev); /* it takes the spinlock itself --SAW */
- /* Reset MII transceiver. Do it before starting the timer to serialize
- mdio_xxx operations. Yes, it's a paranoya :-) 2000/05/09 SAW */
- reset_mii(dev);
- sp->timer.expires = RUN_AT(2*HZ);
- add_timer(&sp->timer);
- }
- return;
-}
-
-static int
-speedo_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- int entry;
-
- /* Prevent interrupts from changing the Tx ring from underneath us. */
- unsigned long flags;
-
- spin_lock_irqsave(&sp->lock, flags);
-
- /* Check if there are enough space. */
- if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
- printk(KERN_ERR "%s: incorrect tbusy state, fixed.\n", dev->name);
- netif_stop_queue(dev);
- sp->tx_full = 1;
- spin_unlock_irqrestore(&sp->lock, flags);
- return 1;
- }
-
- /* Calculate the Tx descriptor entry. */
- entry = sp->cur_tx++ % TX_RING_SIZE;
-
- sp->tx_skbuff[entry] = skb;
- sp->tx_ring[entry].status =
- cpu_to_le32(CmdSuspend | CmdTx | CmdTxFlex);
- if (!(entry & ((TX_RING_SIZE>>2)-1)))
- sp->tx_ring[entry].status |= cpu_to_le32(CmdIntr);
- sp->tx_ring[entry].link =
- cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE));
- sp->tx_ring[entry].tx_desc_addr =
- cpu_to_le32(TX_RING_ELEM_DMA(sp, entry) + TX_DESCR_BUF_OFFSET);
- /* The data region is always in one buffer descriptor. */
- sp->tx_ring[entry].count = cpu_to_le32(sp->tx_threshold);
- sp->tx_ring[entry].tx_buf_addr0 =
- cpu_to_le32(pci_map_single(sp->pdev, skb->data,
- skb->len, PCI_DMA_TODEVICE));
- sp->tx_ring[entry].tx_buf_size0 = cpu_to_le32(skb->len);
-
- /* workaround for hardware bug on 10 mbit half duplex */
-
- if ((sp->partner == 0) && (sp->chip_id == 1)) {
- wait_for_cmd_done(dev, sp);
- iowrite8(0 , ioaddr + SCBCmd);
- udelay(1);
- }
-
- /* Trigger the command unit resume. */
- wait_for_cmd_done(dev, sp);
- clear_suspend(sp->last_cmd);
- /* We want the time window between clearing suspend flag on the previous
- command and resuming CU to be as small as possible.
- Interrupts in between are very undesired. --SAW */
- iowrite8(CUResume, ioaddr + SCBCmd);
- sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
-
- /* Leave room for set_rx_mode(). If there is no more space than reserved
- for multicast filter mark the ring as full. */
- if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
- netif_stop_queue(dev);
- sp->tx_full = 1;
- }
-
- spin_unlock_irqrestore(&sp->lock, flags);
-
- dev->trans_start = jiffies;
-
- return 0;
-}
-
-static void speedo_tx_buffer_gc(struct net_device *dev)
-{
- unsigned int dirty_tx;
- struct speedo_private *sp = netdev_priv(dev);
-
- dirty_tx = sp->dirty_tx;
- while ((int)(sp->cur_tx - dirty_tx) > 0) {
- int entry = dirty_tx % TX_RING_SIZE;
- int status = le32_to_cpu(sp->tx_ring[entry].status);
-
- if (netif_msg_tx_done(sp))
- printk(KERN_DEBUG " scavenge candidate %d status %4.4x.\n",
- entry, status);
- if ((status & StatusComplete) == 0)
- break; /* It still hasn't been processed. */
- if (status & TxUnderrun)
- if (sp->tx_threshold < 0x01e08000) {
- if (netif_msg_tx_err(sp))
- printk(KERN_DEBUG "%s: TX underrun, threshold adjusted.\n",
- dev->name);
- sp->tx_threshold += 0x00040000;
- }
- /* Free the original skb. */
- if (sp->tx_skbuff[entry]) {
- sp->stats.tx_packets++; /* Count only user packets. */
- sp->stats.tx_bytes += sp->tx_skbuff[entry]->len;
- pci_unmap_single(sp->pdev,
- le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0),
- sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
- dev_kfree_skb_irq(sp->tx_skbuff[entry]);
- sp->tx_skbuff[entry] = NULL;
- }
- dirty_tx++;
- }
-
- if (netif_msg_tx_err(sp) && (int)(sp->cur_tx - dirty_tx) > TX_RING_SIZE) {
- printk(KERN_ERR "out-of-sync dirty pointer, %d vs. %d,"
- " full=%d.\n",
- dirty_tx, sp->cur_tx, sp->tx_full);
- dirty_tx += TX_RING_SIZE;
- }
-
- while (sp->mc_setup_head != NULL
- && (int)(dirty_tx - sp->mc_setup_head->tx - 1) > 0) {
- struct speedo_mc_block *t;
- if (netif_msg_tx_err(sp))
- printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name);
- pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma,
- sp->mc_setup_head->len, PCI_DMA_TODEVICE);
- t = sp->mc_setup_head->next;
- kfree(sp->mc_setup_head);
- sp->mc_setup_head = t;
- }
- if (sp->mc_setup_head == NULL)
- sp->mc_setup_tail = NULL;
-
- sp->dirty_tx = dirty_tx;
-}
-
-/* The interrupt handler does all of the Rx thread work and cleans up
- after the Tx thread. */
-static irqreturn_t speedo_interrupt(int irq, void *dev_instance)
-{
- struct net_device *dev = (struct net_device *)dev_instance;
- struct speedo_private *sp;
- void __iomem *ioaddr;
- long boguscnt = max_interrupt_work;
- unsigned short status;
- unsigned int handled = 0;
-
- sp = netdev_priv(dev);
- ioaddr = sp->regs;
-
-#ifndef final_version
- /* A lock to prevent simultaneous entry on SMP machines. */
- if (test_and_set_bit(0, (void*)&sp->in_interrupt)) {
- printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n",
- dev->name);
- sp->in_interrupt = 0; /* Avoid halting machine. */
- return IRQ_NONE;
- }
-#endif
-
- do {
- status = ioread16(ioaddr + SCBStatus);
- /* Acknowledge all of the current interrupt sources ASAP. */
- /* Will change from 0xfc00 to 0xff00 when we start handling
- FCP and ER interrupts --Dragan */
- iowrite16(status & 0xfc00, ioaddr + SCBStatus);
-
- if (netif_msg_intr(sp))
- printk(KERN_DEBUG "%s: interrupt status=%#4.4x.\n",
- dev->name, status);
-
- if ((status & 0xfc00) == 0)
- break;
- handled = 1;
-
-
- if ((status & 0x5000) || /* Packet received, or Rx error. */
- (sp->rx_ring_state&(RrNoMem|RrPostponed)) == RrPostponed)
- /* Need to gather the postponed packet. */
- speedo_rx(dev);
-
- /* Always check if all rx buffers are allocated. --SAW */
- speedo_refill_rx_buffers(dev, 0);
-
- spin_lock(&sp->lock);
- /*
- * The chip may have suspended reception for various reasons.
- * Check for that, and re-prime it should this be the case.
- */
- switch ((status >> 2) & 0xf) {
- case 0: /* Idle */
- break;
- case 1: /* Suspended */
- case 2: /* No resources (RxFDs) */
- case 9: /* Suspended with no more RBDs */
- case 10: /* No resources due to no RBDs */
- case 12: /* Ready with no RBDs */
- speedo_rx_soft_reset(dev);
- break;
- case 3: case 5: case 6: case 7: case 8:
- case 11: case 13: case 14: case 15:
- /* these are all reserved values */
- break;
- }
-
-
- /* User interrupt, Command/Tx unit interrupt or CU not active. */
- if (status & 0xA400) {
- speedo_tx_buffer_gc(dev);
- if (sp->tx_full
- && (int)(sp->cur_tx - sp->dirty_tx) < TX_QUEUE_UNFULL) {
- /* The ring is no longer full. */
- sp->tx_full = 0;
- netif_wake_queue(dev); /* Attention: under a spinlock. --SAW */
- }
- }
-
- spin_unlock(&sp->lock);
-
- if (--boguscnt < 0) {
- printk(KERN_ERR "%s: Too much work at interrupt, status=0x%4.4x.\n",
- dev->name, status);
- /* Clear all interrupt sources. */
- /* Will change from 0xfc00 to 0xff00 when we start handling
- FCP and ER interrupts --Dragan */
- iowrite16(0xfc00, ioaddr + SCBStatus);
- break;
- }
- } while (1);
-
- if (netif_msg_intr(sp))
- printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
- dev->name, ioread16(ioaddr + SCBStatus));
-
- clear_bit(0, (void*)&sp->in_interrupt);
- return IRQ_RETVAL(handled);
-}
-
-static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
-{
- struct speedo_private *sp = netdev_priv(dev);
- struct RxFD *rxf;
- struct sk_buff *skb;
- /* Get a fresh skbuff to replace the consumed one. */
- skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
- if (skb)
- rx_align(skb); /* Align IP on 16 byte boundary */
- sp->rx_skbuff[entry] = skb;
- if (skb == NULL) {
- sp->rx_ringp[entry] = NULL;
- return NULL;
- }
- rxf = sp->rx_ringp[entry] = (struct RxFD *)skb->data;
- sp->rx_ring_dma[entry] =
- pci_map_single(sp->pdev, rxf,
- PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
- skb->dev = dev;
- skb_reserve(skb, sizeof(struct RxFD));
- rxf->rx_buf_addr = 0xffffffff;
- pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry],
- sizeof(struct RxFD), PCI_DMA_TODEVICE);
- return rxf;
-}
-
-static inline void speedo_rx_link(struct net_device *dev, int entry,
- struct RxFD *rxf, dma_addr_t rxf_dma)
-{
- struct speedo_private *sp = netdev_priv(dev);
- rxf->status = cpu_to_le32(0xC0000001); /* '1' for driver use only. */
- rxf->link = 0; /* None yet. */
- rxf->count = cpu_to_le32(PKT_BUF_SZ << 16);
- sp->last_rxf->link = cpu_to_le32(rxf_dma);
- sp->last_rxf->status &= cpu_to_le32(~0xC0000000);
- pci_dma_sync_single_for_device(sp->pdev, sp->last_rxf_dma,
- sizeof(struct RxFD), PCI_DMA_TODEVICE);
- sp->last_rxf = rxf;
- sp->last_rxf_dma = rxf_dma;
-}
-
-static int speedo_refill_rx_buf(struct net_device *dev, int force)
-{
- struct speedo_private *sp = netdev_priv(dev);
- int entry;
- struct RxFD *rxf;
-
- entry = sp->dirty_rx % RX_RING_SIZE;
- if (sp->rx_skbuff[entry] == NULL) {
- rxf = speedo_rx_alloc(dev, entry);
- if (rxf == NULL) {
- unsigned int forw;
- int forw_entry;
- if (netif_msg_rx_err(sp) || !(sp->rx_ring_state & RrOOMReported)) {
- printk(KERN_WARNING "%s: can't fill rx buffer (force %d)!\n",
- dev->name, force);
- sp->rx_ring_state |= RrOOMReported;
- }
- speedo_show_state(dev);
- if (!force)
- return -1; /* Better luck next time! */
- /* Borrow an skb from one of next entries. */
- for (forw = sp->dirty_rx + 1; forw != sp->cur_rx; forw++)
- if (sp->rx_skbuff[forw % RX_RING_SIZE] != NULL)
- break;
- if (forw == sp->cur_rx)
- return -1;
- forw_entry = forw % RX_RING_SIZE;
- sp->rx_skbuff[entry] = sp->rx_skbuff[forw_entry];
- sp->rx_skbuff[forw_entry] = NULL;
- rxf = sp->rx_ringp[forw_entry];
- sp->rx_ringp[forw_entry] = NULL;
- sp->rx_ringp[entry] = rxf;
- }
- } else {
- rxf = sp->rx_ringp[entry];
- }
- speedo_rx_link(dev, entry, rxf, sp->rx_ring_dma[entry]);
- sp->dirty_rx++;
- sp->rx_ring_state &= ~(RrNoMem|RrOOMReported); /* Mark the progress. */
- return 0;
-}
-
-static void speedo_refill_rx_buffers(struct net_device *dev, int force)
-{
- struct speedo_private *sp = netdev_priv(dev);
-
- /* Refill the RX ring. */
- while ((int)(sp->cur_rx - sp->dirty_rx) > 0 &&
- speedo_refill_rx_buf(dev, force) != -1);
-}
-
-static int
-speedo_rx(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- int entry = sp->cur_rx % RX_RING_SIZE;
- int rx_work_limit = sp->dirty_rx + RX_RING_SIZE - sp->cur_rx;
- int alloc_ok = 1;
- int npkts = 0;
-
- if (netif_msg_intr(sp))
- printk(KERN_DEBUG " In speedo_rx().\n");
- /* If we own the next entry, it's a new packet. Send it up. */
- while (sp->rx_ringp[entry] != NULL) {
- int status;
- int pkt_len;
-
- pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry],
- sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
- status = le32_to_cpu(sp->rx_ringp[entry]->status);
- pkt_len = le32_to_cpu(sp->rx_ringp[entry]->count) & 0x3fff;
-
- if (!(status & RxComplete))
- break;
-
- if (--rx_work_limit < 0)
- break;
-
- /* Check for a rare out-of-memory case: the current buffer is
- the last buffer allocated in the RX ring. --SAW */
- if (sp->last_rxf == sp->rx_ringp[entry]) {
- /* Postpone the packet. It'll be reaped at an interrupt when this
- packet is no longer the last packet in the ring. */
- if (netif_msg_rx_err(sp))
- printk(KERN_DEBUG "%s: RX packet postponed!\n",
- dev->name);
- sp->rx_ring_state |= RrPostponed;
- break;
- }
-
- if (netif_msg_rx_status(sp))
- printk(KERN_DEBUG " speedo_rx() status %8.8x len %d.\n", status,
- pkt_len);
- if ((status & (RxErrTooBig|RxOK|0x0f90)) != RxOK) {
- if (status & RxErrTooBig)
- printk(KERN_ERR "%s: Ethernet frame overran the Rx buffer, "
- "status %8.8x!\n", dev->name, status);
- else if (! (status & RxOK)) {
- /* There was a fatal error. This *should* be impossible. */
- sp->stats.rx_errors++;
- printk(KERN_ERR "%s: Anomalous event in speedo_rx(), "
- "status %8.8x.\n",
- dev->name, status);
- }
- } else {
- struct sk_buff *skb;
-
- /* Check if the packet is long enough to just accept without
- copying to a properly sized skbuff. */
- if (pkt_len < rx_copybreak
- && (skb = dev_alloc_skb(pkt_len + 2)) != 0) {
- skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
- /* 'skb_put()' points to the start of sk_buff data area. */
- pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry],
- sizeof(struct RxFD) + pkt_len,
- PCI_DMA_FROMDEVICE);
-
-#if 1 || USE_IP_CSUM
- /* Packet is in one chunk -- we can copy + cksum. */
- skb_copy_to_linear_data(skb, sp->rx_skbuff[entry]->data, pkt_len);
- skb_put(skb, pkt_len);
-#else
- skb_copy_from_linear_data(sp->rx_skbuff[entry],
- skb_put(skb, pkt_len),
- pkt_len);
-#endif
- pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry],
- sizeof(struct RxFD) + pkt_len,
- PCI_DMA_FROMDEVICE);
- npkts++;
- } else {
- /* Pass up the already-filled skbuff. */
- skb = sp->rx_skbuff[entry];
- if (skb == NULL) {
- printk(KERN_ERR "%s: Inconsistent Rx descriptor chain.\n",
- dev->name);
- break;
- }
- sp->rx_skbuff[entry] = NULL;
- skb_put(skb, pkt_len);
- npkts++;
- sp->rx_ringp[entry] = NULL;
- pci_unmap_single(sp->pdev, sp->rx_ring_dma[entry],
- PKT_BUF_SZ + sizeof(struct RxFD),
- PCI_DMA_FROMDEVICE);
- }
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->last_rx = jiffies;
- sp->stats.rx_packets++;
- sp->stats.rx_bytes += pkt_len;
- }
- entry = (++sp->cur_rx) % RX_RING_SIZE;
- sp->rx_ring_state &= ~RrPostponed;
- /* Refill the recently taken buffers.
- Do it one-by-one to handle traffic bursts better. */
- if (alloc_ok && speedo_refill_rx_buf(dev, 0) == -1)
- alloc_ok = 0;
- }
-
- /* Try hard to refill the recently taken buffers. */
- speedo_refill_rx_buffers(dev, 1);
-
- if (npkts)
- sp->last_rx_time = jiffies;
-
- return 0;
-}
-
-static int
-speedo_close(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- int i;
-
- netdevice_stop(dev);
- netif_stop_queue(dev);
-
- if (netif_msg_ifdown(sp))
- printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
- dev->name, ioread16(ioaddr + SCBStatus));
-
- /* Shut off the media monitoring timer. */
- del_timer_sync(&sp->timer);
-
- iowrite16(SCBMaskAll, ioaddr + SCBCmd);
-
- /* Shutting down the chip nicely fails to disable flow control. So.. */
- iowrite32(PortPartialReset, ioaddr + SCBPort);
- ioread32(ioaddr + SCBPort); /* flush posted write */
- /*
- * The chip requires a 10 microsecond quiet period. Wait here!
- */
- udelay(10);
-
- free_irq(dev->irq, dev);
- speedo_show_state(dev);
-
- /* Free all the skbuffs in the Rx and Tx queues. */
- for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = sp->rx_skbuff[i];
- sp->rx_skbuff[i] = NULL;
- /* Clear the Rx descriptors. */
- if (skb) {
- pci_unmap_single(sp->pdev,
- sp->rx_ring_dma[i],
- PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE);
- dev_kfree_skb(skb);
- }
- }
-
- for (i = 0; i < TX_RING_SIZE; i++) {
- struct sk_buff *skb = sp->tx_skbuff[i];
- sp->tx_skbuff[i] = NULL;
- /* Clear the Tx descriptors. */
- if (skb) {
- pci_unmap_single(sp->pdev,
- le32_to_cpu(sp->tx_ring[i].tx_buf_addr0),
- skb->len, PCI_DMA_TODEVICE);
- dev_kfree_skb(skb);
- }
- }
-
- /* Free multicast setting blocks. */
- for (i = 0; sp->mc_setup_head != NULL; i++) {
- struct speedo_mc_block *t;
- t = sp->mc_setup_head->next;
- kfree(sp->mc_setup_head);
- sp->mc_setup_head = t;
- }
- sp->mc_setup_tail = NULL;
- if (netif_msg_ifdown(sp))
- printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n", dev->name, i);
-
- pci_set_power_state(sp->pdev, PCI_D2);
-
- return 0;
-}
-
-/* The Speedo-3 has an especially awkward and unusable method of getting
- statistics out of the chip. It takes an unpredictable length of time
- for the dump-stats command to complete. To avoid a busy-wait loop we
- update the stats with the previous dump results, and then trigger a
- new dump.
-
- Oh, and incoming frames are dropped while executing dump-stats!
- */
-static struct net_device_stats *
-speedo_get_stats(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
-
- /* Update only if the previous dump finished. */
- if (sp->lstats->done_marker == le32_to_cpu(0xA007)) {
- sp->stats.tx_aborted_errors += le32_to_cpu(sp->lstats->tx_coll16_errs);
- sp->stats.tx_window_errors += le32_to_cpu(sp->lstats->tx_late_colls);
- sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_underruns);
- sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_lost_carrier);
- /*sp->stats.tx_deferred += le32_to_cpu(sp->lstats->tx_deferred);*/
- sp->stats.collisions += le32_to_cpu(sp->lstats->tx_total_colls);
- sp->stats.rx_crc_errors += le32_to_cpu(sp->lstats->rx_crc_errs);
- sp->stats.rx_frame_errors += le32_to_cpu(sp->lstats->rx_align_errs);
- sp->stats.rx_over_errors += le32_to_cpu(sp->lstats->rx_resource_errs);
- sp->stats.rx_fifo_errors += le32_to_cpu(sp->lstats->rx_overrun_errs);
- sp->stats.rx_length_errors += le32_to_cpu(sp->lstats->rx_runt_errs);
- sp->lstats->done_marker = 0x0000;
- if (netif_running(dev)) {
- unsigned long flags;
- /* Take a spinlock to make wait_for_cmd_done and sending the
- command atomic. --SAW */
- spin_lock_irqsave(&sp->lock, flags);
- wait_for_cmd_done(dev, sp);
- iowrite8(CUDumpStats, ioaddr + SCBCmd);
- spin_unlock_irqrestore(&sp->lock, flags);
- }
- }
- return &sp->stats;
-}
-
-static void speedo_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- struct speedo_private *sp = netdev_priv(dev);
- strncpy(info->driver, "eepro100", sizeof(info->driver)-1);
- strncpy(info->version, version, sizeof(info->version)-1);
- if (sp->pdev)
- strcpy(info->bus_info, pci_name(sp->pdev));
-}
-
-static int speedo_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
- struct speedo_private *sp = netdev_priv(dev);
- spin_lock_irq(&sp->lock);
- mii_ethtool_gset(&sp->mii_if, ecmd);
- spin_unlock_irq(&sp->lock);
- return 0;
-}
-
-static int speedo_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
- struct speedo_private *sp = netdev_priv(dev);
- int res;
- spin_lock_irq(&sp->lock);
- res = mii_ethtool_sset(&sp->mii_if, ecmd);
- spin_unlock_irq(&sp->lock);
- return res;
-}
-
-static int speedo_nway_reset(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- return mii_nway_restart(&sp->mii_if);
-}
-
-static u32 speedo_get_link(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- return mii_link_ok(&sp->mii_if);
-}
-
-static u32 speedo_get_msglevel(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- return sp->msg_enable;
-}
-
-static void speedo_set_msglevel(struct net_device *dev, u32 v)
-{
- struct speedo_private *sp = netdev_priv(dev);
- sp->msg_enable = v;
-}
-
-static const struct ethtool_ops ethtool_ops = {
- .get_drvinfo = speedo_get_drvinfo,
- .get_settings = speedo_get_settings,
- .set_settings = speedo_set_settings,
- .nway_reset = speedo_nway_reset,
- .get_link = speedo_get_link,
- .get_msglevel = speedo_get_msglevel,
- .set_msglevel = speedo_set_msglevel,
-};
-
-static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct speedo_private *sp = netdev_priv(dev);
- struct mii_ioctl_data *data = if_mii(rq);
- int phy = sp->phy[0] & 0x1f;
- int saved_acpi;
- int t;
-
- switch(cmd) {
- case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- data->phy_id = phy;
-
- case SIOCGMIIREG: /* Read MII PHY register. */
- /* FIXME: these operations need to be serialized with MDIO
- access from the timeout handler.
- They are currently serialized only with MDIO access from the
- timer routine. 2000/05/09 SAW */
- saved_acpi = pci_set_power_state(sp->pdev, PCI_D0);
- t = del_timer_sync(&sp->timer);
- data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
- if (t)
- add_timer(&sp->timer); /* may be set to the past --SAW */
- pci_set_power_state(sp->pdev, saved_acpi);
- return 0;
-
- case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- saved_acpi = pci_set_power_state(sp->pdev, PCI_D0);
- t = del_timer_sync(&sp->timer);
- mdio_write(dev, data->phy_id, data->reg_num, data->val_in);
- if (t)
- add_timer(&sp->timer); /* may be set to the past --SAW */
- pci_set_power_state(sp->pdev, saved_acpi);
- return 0;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-/* Set or clear the multicast filter for this adaptor.
- This is very ugly with Intel chips -- we usually have to execute an
- entire configuration command, plus process a multicast command.
- This is complicated. We must put a large configuration command and
- an arbitrarily-sized multicast command in the transmit list.
- To minimize the disruption -- the previous command might have already
- loaded the link -- we convert the current command block, normally a Tx
- command, into a no-op and link it to the new command.
-*/
-static void set_rx_mode(struct net_device *dev)
-{
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
- struct descriptor *last_cmd;
- char new_rx_mode;
- unsigned long flags;
- int entry, i;
-
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- new_rx_mode = 3;
- } else if ((dev->flags & IFF_ALLMULTI) ||
- dev->mc_count > multicast_filter_limit) {
- new_rx_mode = 1;
- } else
- new_rx_mode = 0;
-
- if (netif_msg_rx_status(sp))
- printk(KERN_DEBUG "%s: set_rx_mode %d -> %d\n", dev->name,
- sp->rx_mode, new_rx_mode);
-
- if ((int)(sp->cur_tx - sp->dirty_tx) > TX_RING_SIZE - TX_MULTICAST_SIZE) {
- /* The Tx ring is full -- don't add anything! Hope the mode will be
- * set again later. */
- sp->rx_mode = -1;
- return;
- }
-
- if (new_rx_mode != sp->rx_mode) {
- u8 *config_cmd_data;
-
- spin_lock_irqsave(&sp->lock, flags);
- entry = sp->cur_tx++ % TX_RING_SIZE;
- last_cmd = sp->last_cmd;
- sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
-
- sp->tx_skbuff[entry] = NULL; /* Redundant. */
- sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdConfigure);
- sp->tx_ring[entry].link =
- cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
- config_cmd_data = (void *)&sp->tx_ring[entry].tx_desc_addr;
- /* Construct a full CmdConfig frame. */
- memcpy(config_cmd_data, i82558_config_cmd, CONFIG_DATA_SIZE);
- config_cmd_data[1] = (txfifo << 4) | rxfifo;
- config_cmd_data[4] = rxdmacount;
- config_cmd_data[5] = txdmacount + 0x80;
- config_cmd_data[15] |= (new_rx_mode & 2) ? 1 : 0;
- /* 0x80 doesn't disable FC 0x84 does.
- Disable Flow control since we are not ACK-ing any FC interrupts
- for now. --Dragan */
- config_cmd_data[19] = 0x84;
- config_cmd_data[19] |= sp->mii_if.full_duplex ? 0x40 : 0;
- config_cmd_data[21] = (new_rx_mode & 1) ? 0x0D : 0x05;
- if (sp->phy[0] & 0x8000) { /* Use the AUI port instead. */
- config_cmd_data[15] |= 0x80;
- config_cmd_data[8] = 0;
- }
- /* Trigger the command unit resume. */
- wait_for_cmd_done(dev, sp);
- clear_suspend(last_cmd);
- iowrite8(CUResume, ioaddr + SCBCmd);
- if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
- netif_stop_queue(dev);
- sp->tx_full = 1;
- }
- spin_unlock_irqrestore(&sp->lock, flags);
- }
-
- if (new_rx_mode == 0 && dev->mc_count < 4) {
- /* The simple case of 0-3 multicast list entries occurs often, and
- fits within one tx_ring[] entry. */
- struct dev_mc_list *mclist;
- u16 *setup_params, *eaddrs;
-
- spin_lock_irqsave(&sp->lock, flags);
- entry = sp->cur_tx++ % TX_RING_SIZE;
- last_cmd = sp->last_cmd;
- sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry];
-
- sp->tx_skbuff[entry] = NULL;
- sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdMulticastList);
- sp->tx_ring[entry].link =
- cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
- sp->tx_ring[entry].tx_desc_addr = 0; /* Really MC list count. */
- setup_params = (u16 *)&sp->tx_ring[entry].tx_desc_addr;
- *setup_params++ = cpu_to_le16(dev->mc_count*6);
- /* Fill in the multicast addresses. */
- for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
- i++, mclist = mclist->next) {
- eaddrs = (u16 *)mclist->dmi_addr;
- *setup_params++ = *eaddrs++;
- *setup_params++ = *eaddrs++;
- *setup_params++ = *eaddrs++;
- }
-
- wait_for_cmd_done(dev, sp);
- clear_suspend(last_cmd);
- /* Immediately trigger the command unit resume. */
- iowrite8(CUResume, ioaddr + SCBCmd);
-
- if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
- netif_stop_queue(dev);
- sp->tx_full = 1;
- }
- spin_unlock_irqrestore(&sp->lock, flags);
- } else if (new_rx_mode == 0) {
- struct dev_mc_list *mclist;
- u16 *setup_params, *eaddrs;
- struct speedo_mc_block *mc_blk;
- struct descriptor *mc_setup_frm;
- int i;
-
- mc_blk = kmalloc(sizeof(*mc_blk) + 2 + multicast_filter_limit*6,
- GFP_ATOMIC);
- if (mc_blk == NULL) {
- printk(KERN_ERR "%s: Failed to allocate a setup frame.\n",
- dev->name);
- sp->rx_mode = -1; /* We failed, try again. */
- return;
- }
- mc_blk->next = NULL;
- mc_blk->len = 2 + multicast_filter_limit*6;
- mc_blk->frame_dma =
- pci_map_single(sp->pdev, &mc_blk->frame, mc_blk->len,
- PCI_DMA_TODEVICE);
- mc_setup_frm = &mc_blk->frame;
-
- /* Fill the setup frame. */
- if (netif_msg_ifup(sp))
- printk(KERN_DEBUG "%s: Constructing a setup frame at %p.\n",
- dev->name, mc_setup_frm);
- mc_setup_frm->cmd_status =
- cpu_to_le32(CmdSuspend | CmdIntr | CmdMulticastList);
- /* Link set below. */
- setup_params = (u16 *)&mc_setup_frm->params;
- *setup_params++ = cpu_to_le16(dev->mc_count*6);
- /* Fill in the multicast addresses. */
- for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
- i++, mclist = mclist->next) {
- eaddrs = (u16 *)mclist->dmi_addr;
- *setup_params++ = *eaddrs++;
- *setup_params++ = *eaddrs++;
- *setup_params++ = *eaddrs++;
- }
-
- /* Disable interrupts while playing with the Tx Cmd list. */
- spin_lock_irqsave(&sp->lock, flags);
-
- if (sp->mc_setup_tail)
- sp->mc_setup_tail->next = mc_blk;
- else
- sp->mc_setup_head = mc_blk;
- sp->mc_setup_tail = mc_blk;
- mc_blk->tx = sp->cur_tx;
-
- entry = sp->cur_tx++ % TX_RING_SIZE;
- last_cmd = sp->last_cmd;
- sp->last_cmd = mc_setup_frm;
-
- /* Change the command to a NoOp, pointing to the CmdMulti command. */
- sp->tx_skbuff[entry] = NULL;
- sp->tx_ring[entry].status = cpu_to_le32(CmdNOp);
- sp->tx_ring[entry].link = cpu_to_le32(mc_blk->frame_dma);
-
- /* Set the link in the setup frame. */
- mc_setup_frm->link =
- cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE));
-
- pci_dma_sync_single_for_device(sp->pdev, mc_blk->frame_dma,
- mc_blk->len, PCI_DMA_TODEVICE);
-
- wait_for_cmd_done(dev, sp);
- clear_suspend(last_cmd);
- /* Immediately trigger the command unit resume. */
- iowrite8(CUResume, ioaddr + SCBCmd);
-
- if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) {
- netif_stop_queue(dev);
- sp->tx_full = 1;
- }
- spin_unlock_irqrestore(&sp->lock, flags);
-
- if (netif_msg_rx_status(sp))
- printk(" CmdMCSetup frame length %d in entry %d.\n",
- dev->mc_count, entry);
- }
-
- sp->rx_mode = new_rx_mode;
-}
-
-#ifdef CONFIG_PM
-static int eepro100_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata (pdev);
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
-
- pci_save_state(pdev);
-
- if (!netif_running(dev))
- return 0;
-
- del_timer_sync(&sp->timer);
-
- netif_device_detach(dev);
- iowrite32(PortPartialReset, ioaddr + SCBPort);
-
- /* XXX call pci_set_power_state ()? */
- pci_disable_device(pdev);
- pci_set_power_state (pdev, PCI_D3hot);
- return 0;
-}
-
-static int eepro100_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata (pdev);
- struct speedo_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->regs;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_enable_device(pdev);
- pci_set_master(pdev);
-
- if (!netif_running(dev))
- return 0;
-
- /* I'm absolutely uncertain if this part of code may work.
- The problems are:
- - correct hardware reinitialization;
- - correct driver behavior between different steps of the
- reinitialization;
- - serialization with other driver calls.
- 2000/03/08 SAW */
- iowrite16(SCBMaskAll, ioaddr + SCBCmd);
- speedo_resume(dev);
- netif_device_attach(dev);
- sp->rx_mode = -1;
- sp->flow_ctrl = sp->partner = 0;
- set_rx_mode(dev);
- sp->timer.expires = RUN_AT(2*HZ);
- add_timer(&sp->timer);
- return 0;
-}
-#endif /* CONFIG_PM */
-
-static void __devexit eepro100_remove_one (struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata (pdev);
- struct speedo_private *sp = netdev_priv(dev);
-
- unregister_netdev(dev);
-
- release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
- release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
-
- pci_iounmap(pdev, sp->regs);
- pci_free_consistent(pdev, TX_RING_SIZE * sizeof(struct TxFD)
- + sizeof(struct speedo_stats),
- sp->tx_ring, sp->tx_ring_dma);
- pci_disable_device(pdev);
- free_netdev(dev);
-}
-
-static struct pci_device_id eepro100_pci_tbl[] = {
- { PCI_VENDOR_ID_INTEL, 0x1229, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1209, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1029, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1030, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1031, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1032, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1033, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1034, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1035, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1036, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1037, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1038, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1039, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x103A, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x103B, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x103C, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x103D, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x103E, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1050, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1059, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x1227, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x2449, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x2459, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x245D, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x5200, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, 0x5201, PCI_ANY_ID, PCI_ANY_ID, },
- { 0,}
-};
-MODULE_DEVICE_TABLE(pci, eepro100_pci_tbl);
-
-static struct pci_driver eepro100_driver = {
- .name = "eepro100",
- .id_table = eepro100_pci_tbl,
- .probe = eepro100_init_one,
- .remove = __devexit_p(eepro100_remove_one),
-#ifdef CONFIG_PM
- .suspend = eepro100_suspend,
- .resume = eepro100_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init eepro100_init_module(void)
-{
-#ifdef MODULE
- printk(version);
-#endif
- return pci_register_driver(&eepro100_driver);
-}
-
-static void __exit eepro100_cleanup_module(void)
-{
- pci_unregister_driver(&eepro100_driver);
-}
-
-module_init(eepro100_init_module);
-module_exit(eepro100_cleanup_module);
-
-/*
- * Local variables:
- * compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * End:
- */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists