This patch restores a couple of workarounds from 2.6.16: * restart transmit moderation timer in case it expires during IRQ routine * default to having 10 HZ watchdog timer. At this point it more important not to hang than to worry about the power cost. Signed-off-by: Stephen Hemminger --- a/drivers/net/sky2.c 2007-07-09 15:30:04.000000000 -0700 +++ b/drivers/net/sky2.c 2007-07-09 15:30:08.000000000 -0700 @@ -96,7 +96,7 @@ static int disable_msi = 0; module_param(disable_msi, int, 0); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); -static int idle_timeout = 0; +static int idle_timeout = 100; module_param(idle_timeout, int, 0); MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)"); @@ -2490,6 +2490,13 @@ static int sky2_poll(struct net_device * work_done = sky2_status_intr(hw, work_limit); if (work_done < work_limit) { + /* Bug/Errata workaround? + * Need to kick the TX irq moderation timer. + */ + if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) { + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + } netif_rx_complete(dev0); /* end of interrupt, re-enables also acts as I/O synchronization */ -- Stephen Hemminger - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html