| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070712234553.GR3492@stusta.de>
Date: Fri, 13 Jul 2007 01:45:53 +0200
From: Adrian Bunk <bunk@...sta.de>
To: Jens Axboe <jens.axboe@...cle.com>,
Boaz Harrosh <bharrosh@...asas.com>
Cc: linux-kernel@...r.kernel.org, jgarzik@...ox.com,
netdev@...r.kernel.org, geert@...ux-m68k.org,
zippel@...ux-m68k.org, linux-m68k@...ts.linux-m68k.org
Subject: [2.6 patch] more ACSI removal
This patch removes some code that became dead code after the ATARI_ACSI
removal.
It also indirectly fixes the following bug introduced by
commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6:
config ATARI_SLM
tristate "Atari SLM laser printer support"
- depends on ATARI && ATARI_ACSI!=n
+ depends on ATARI
Signed-off-by: Adrian Bunk <bunk@...sta.de>
---
Documentation/m68k/kernel-options.txt | 7
Documentation/networking/net-modules.txt | 6
drivers/block/Kconfig | 11
drivers/block/Makefile | 1
drivers/block/acsi_slm.c | 1032 -----------------------
drivers/net/Kconfig | 16
drivers/net/Makefile | 2
drivers/net/Space.c | 8
drivers/net/atari_bionet.c | 675 ---------------
drivers/net/atari_pamsnet.c | 878 -------------------
include/asm-m68k/atari_SLM.h | 28
include/asm-m68k/atari_acsi.h | 37
12 files changed, 2701 deletions(-)
--- linux-2.6.22-rc6-mm1/Documentation/networking/net-modules.txt.old 2007-07-12 20:43:25.000000000 +0200
+++ linux-2.6.22-rc6-mm1/Documentation/networking/net-modules.txt 2007-07-12 20:43:37.000000000 +0200
@@ -146,12 +146,6 @@
irq = 0
(Probes ports: 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300)
-atari_bionet.c:
- Supports full autoprobing. (m68k/Atari)
-
-atari_pamsnet.c:
- Supports full autoprobing. (m68k/Atari)
-
atarilance.c:
Supports full autoprobing. (m68k/Atari)
--- linux-2.6.22-rc6-mm1/Documentation/m68k/kernel-options.txt.old 2007-07-12 20:31:06.000000000 +0200
+++ linux-2.6.22-rc6-mm1/Documentation/m68k/kernel-options.txt 2007-07-12 20:31:15.000000000 +0200
@@ -82,13 +82,6 @@
/dev/fd : -> 0x0200 (floppy disk)
/dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k)
/dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k)
- /dev/ada: -> 0x1c00 (first ACSI device)
- /dev/adb: -> 0x1c10 (second ACSI device)
- /dev/adc: -> 0x1c20 (third ACSI device)
- /dev/add: -> 0x1c30 (forth ACSI device)
-
-The last four names are available only if the kernel has been compiled
-with Atari and ACSI support.
The name must be followed by a decimal number, that stands for the
partition number. Internally, the value of the number is just
--- linux-2.6.22-rc6-mm1/drivers/block/Kconfig.old 2007-07-12 20:31:24.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/block/Kconfig 2007-07-12 20:31:43.000000000 +0200
@@ -97,17 +97,6 @@
devices have only one LUN, and so most people can say N here and
should in fact do so, because it is safer.
-config ATARI_SLM
- tristate "Atari SLM laser printer support"
- depends on ATARI
- help
- If you have an Atari SLM laser printer, say Y to include support for
- it in the kernel. Otherwise, say N. This driver is also available as
- a module ( = code which can be inserted in and removed from the
- running kernel whenever you want). The module will be called
- acsi_slm. Be warned: the driver needs much ST-RAM and can cause
- problems due to that fact!
-
config BLK_DEV_XD
tristate "XT hard disk support"
depends on ISA && ISA_DMA_API
--- linux-2.6.22-rc6-mm1/drivers/block/Makefile.old 2007-07-12 20:31:51.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/block/Makefile 2007-07-12 20:31:58.000000000 +0200
@@ -10,6 +10,5 @@
obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o
obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
-obj-$(CONFIG_ATARI_SLM) += acsi_slm.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += rd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
--- linux-2.6.22-rc6-mm1/drivers/net/Kconfig.old 2007-07-12 20:33:44.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/net/Kconfig 2007-07-12 20:34:03.000000000 +0200
@@ -378,22 +378,6 @@
on the AMD Lance chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
-config ATARI_BIONET
- tristate "BioNet-100 support"
- depends on ATARI && ATARI_ACSI && BROKEN
- help
- Say Y to include support for BioData's BioNet-100 Ethernet adapter
- for the ACSI port. The driver works (has to work...) with a polled
- I/O scheme, so it's rather slow :-(
-
-config ATARI_PAMSNET
- tristate "PAMsNet support"
- depends on ATARI && ATARI_ACSI && BROKEN
- help
- Say Y to include support for the PAMsNet Ethernet adapter for the
- ACSI port ("ACSI node"). The driver works (has to work...) with a
- polled I/O scheme, so it's rather slow :-(
-
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on SUN3 || SUN3X
--- linux-2.6.22-rc6-mm1/drivers/net/Makefile.old 2007-07-12 20:34:15.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/net/Makefile 2007-07-12 20:34:26.000000000 +0200
@@ -175,8 +175,6 @@
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
-obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_HYDRA) += hydra.o
obj-$(CONFIG_ARIADNE) += ariadne.o
--- linux-2.6.22-rc6-mm1/drivers/net/Space.c.old 2007-07-12 20:35:09.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/net/Space.c 2007-07-12 20:35:23.000000000 +0200
@@ -75,8 +75,6 @@
extern struct net_device *sun3lance_probe(int unit);
extern struct net_device *sun3_82586_probe(int unit);
extern struct net_device *apne_probe(int unit);
-extern struct net_device *bionet_probe(int unit);
-extern struct net_device *pamsnet_probe(int unit);
extern struct net_device *cs89x0_probe(int unit);
extern struct net_device *hplance_probe(int unit);
extern struct net_device *bagetlance_probe(int unit);
@@ -264,12 +262,6 @@
#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
{apne_probe, 0},
#endif
-#ifdef CONFIG_ATARI_BIONET /* Atari Bionet Ethernet board */
- {bionet_probe, 0},
-#endif
-#ifdef CONFIG_ATARI_PAMSNET /* Atari PAMsNet Ethernet board */
- {pamsnet_probe, 0},
-#endif
#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
{mvme147lance_probe, 0},
#endif
--- linux-2.6.22-rc6-mm1/include/asm-m68k/atari_acsi.h 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,37 +0,0 @@
-#ifndef _ASM_ATARI_ACSI_H
-#define _ASM_ATARI_ACSI_H
-
-/* Functions exported by drivers/block/acsi.c */
-
-void acsi_delay_start( void );
-void acsi_delay_end( long usec );
-int acsi_wait_for_IRQ( unsigned timeout );
-int acsi_wait_for_noIRQ( unsigned timeout );
-int acsicmd_nodma( const char *cmd, int enable);
-int acsi_getstatus( void );
-int acsi_extstatus( char *buffer, int cnt );
-void acsi_end_extstatus( void );
-int acsi_extcmd( unsigned char *buffer, int cnt );
-
-/* The ACSI buffer is guarantueed to reside in ST-RAM and may be used by other
- * drivers that work on the ACSI bus, too. It's data are valid only as long as
- * the ST-DMA is locked. */
-extern char *acsi_buffer;
-extern unsigned long phys_acsi_buffer;
-
-/* Utility macros */
-
-/* Send one data byte over the bus and set mode for next operation
- * with one move.l -- Atari recommends this...
- */
-
-#define DMA_LONG_WRITE(data,mode) \
- do { \
- *((unsigned long *)&dma_wd.fdc_acces_seccount) = \
- ((data)<<16) | (mode); \
- } while(0)
-
-#define ENABLE_IRQ() atari_turnon_irq( IRQ_MFP_ACSI )
-#define DISABLE_IRQ() atari_turnoff_irq( IRQ_MFP_ACSI )
-
-#endif /* _ASM_ATARI_ACSI_H */
--- linux-2.6.22-rc6-mm1/include/asm-m68k/atari_SLM.h 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,28 +0,0 @@
-
-#ifndef _ATARI_SLM_H
-#define _ATARI_SLM_H
-
-/* Atari SLM laser printer specific ioctls */
-
-#define SLMIOGSTAT 0xa100
-#define SLMIOGPSIZE 0xa101
-#define SLMIOGMFEED 0xa102
-
-#define SLMIORESET 0xa140
-
-#define SLMIOSPSIZE 0xa181
-#define SLMIOSMFEED 0xa182
-
-/* Status returning structure (SLMIOGSTAT) */
-struct SLM_status {
- int stat; /* numeric status code */
- char str[40]; /* status string */
-};
-
-/* Paper size structure (SLMIO[GS]PSIZE) */
-struct SLM_paper_size {
- int width;
- int height;
-};
-
-#endif /* _ATARI_SLM_H */
--- linux-2.6.22-rc6-mm1/drivers/block/acsi_slm.c 2007-07-12 20:40:41.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,1032 +0,0 @@
-/*
- * acsi_slm.c -- Device driver for the Atari SLM laser printer
- *
- * Copyright 1995 Roman Hodek <Roman.Hodek@...ormatik.uni-erlangen.de>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- */
-
-/*
-
-Notes:
-
-The major number for SLM printers is 28 (like ACSI), but as a character
-device, not block device. The minor number is the number of the printer (if
-you have more than one SLM; currently max. 2 (#define-constant) SLMs are
-supported). The device can be opened for reading and writing. If reading it,
-you get some status infos (MODE SENSE data). Writing mode is used for the data
-to be printed. Some ioctls allow to get the printer status and to tune printer
-modes and some internal variables.
-
-A special problem of the SLM driver is the timing and thus the buffering of
-the print data. The problem is that all the data for one page must be present
-in memory when printing starts, else --when swapping occurs-- the timing could
-not be guaranteed. There are several ways to assure this:
-
- 1) Reserve a buffer of 1196k (maximum page size) statically by
- atari_stram_alloc(). The data are collected there until they're complete,
- and then printing starts. Since the buffer is reserved, no further
- considerations about memory and swapping are needed. So this is the
- simplest method, but it needs a lot of memory for just the SLM.
-
- An striking advantage of this method is (supposed the SLM_CONT_CNT_REPROG
- method works, see there), that there are no timing problems with the DMA
- anymore.
-
- 2) The other method would be to reserve the buffer dynamically each time
- printing is required. I could think of looking at mem_map where the
- largest unallocted ST-RAM area is, taking the area, and then extending it
- by swapping out the neighbored pages, until the needed size is reached.
- This requires some mm hacking, but seems possible. The only obstacle could
- be pages that cannot be swapped out (reserved pages)...
-
- 3) Another possibility would be to leave the real data in user space and to
- work with two dribble buffers of about 32k in the driver: While the one
- buffer is DMAed to the SLM, the other can be filled with new data. But
- to keep the timing, that requires that the user data remain in memory and
- are not swapped out. Requires mm hacking, too, but maybe not so bad as
- method 2).
-
-*/
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_stram.h>
-#include <asm/atari_SLM.h>
-
-
-#undef DEBUG
-
-/* Define this if the page data are continuous in physical memory. That
- * requires less reprogramming of the ST-DMA */
-#define SLM_CONTINUOUS_DMA
-
-/* Use continuous reprogramming of the ST-DMA counter register. This is
- * --strictly speaking-- not allowed, Atari recommends not to look at the
- * counter register while a DMA is going on. But I don't know if that applies
- * only for reading the register, or also writing to it. Writing only works
- * fine for me... The advantage is that the timing becomes absolutely
- * uncritical: Just update each, say 200ms, the counter reg to its maximum,
- * and the DMA will work until the status byte interrupt occurs.
- */
-#define SLM_CONT_CNT_REPROG
-
-#define CMDSET_TARG_LUN(cmd,targ,lun) \
- do { \
- cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5; \
- cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5; \
- } while(0)
-
-#define START_TIMER(to) mod_timer(&slm_timer, jiffies + (to))
-#define STOP_TIMER() del_timer(&slm_timer)
-
-
-static char slmreqsense_cmd[6] = { 0x03, 0, 0, 0, 0, 0 };
-static char slmprint_cmd[6] = { 0x0a, 0, 0, 0, 0, 0 };
-static char slminquiry_cmd[6] = { 0x12, 0, 0, 0, 0, 0x80 };
-static char slmmsense_cmd[6] = { 0x1a, 0, 0, 0, 255, 0 };
-#if 0
-static char slmmselect_cmd[6] = { 0x15, 0, 0, 0, 0, 0 };
-#endif
-
-
-#define MAX_SLM 2
-
-static struct slm {
- unsigned target; /* target number */
- unsigned lun; /* LUN in target controller */
- atomic_t wr_ok; /* set to 0 if output part busy */
- atomic_t rd_ok; /* set to 0 if status part busy */
-} slm_info[MAX_SLM];
-
-int N_SLM_Printers = 0;
-
-/* printer buffer */
-static unsigned char *SLMBuffer; /* start of buffer */
-static unsigned char *BufferP; /* current position in buffer */
-static int BufferSize; /* length of buffer for page size */
-
-typedef enum { IDLE, FILLING, PRINTING } SLMSTATE;
-static SLMSTATE SLMState;
-static int SLMBufOwner; /* SLM# currently using the buffer */
-
-/* DMA variables */
-#ifndef SLM_CONT_CNT_REPROG
-static unsigned long SLMCurAddr; /* current base addr of DMA chunk */
-static unsigned long SLMEndAddr; /* expected end addr */
-static unsigned long SLMSliceSize; /* size of one DMA chunk */
-#endif
-static int SLMError;
-
-/* wait queues */
-static DECLARE_WAIT_QUEUE_HEAD(slm_wait); /* waiting for buffer */
-static DECLARE_WAIT_QUEUE_HEAD(print_wait); /* waiting for printing finished */
-
-/* status codes */
-#define SLMSTAT_OK 0x00
-#define SLMSTAT_ORNERY 0x02
-#define SLMSTAT_TONER 0x03
-#define SLMSTAT_WARMUP 0x04
-#define SLMSTAT_PAPER 0x05
-#define SLMSTAT_DRUM 0x06
-#define SLMSTAT_INJAM 0x07
-#define SLMSTAT_THRJAM 0x08
-#define SLMSTAT_OUTJAM 0x09
-#define SLMSTAT_COVER 0x0a
-#define SLMSTAT_FUSER 0x0b
-#define SLMSTAT_IMAGER 0x0c
-#define SLMSTAT_MOTOR 0x0d
-#define SLMSTAT_VIDEO 0x0e
-#define SLMSTAT_SYSTO 0x10
-#define SLMSTAT_OPCODE 0x12
-#define SLMSTAT_DEVNUM 0x15
-#define SLMSTAT_PARAM 0x1a
-#define SLMSTAT_ACSITO 0x1b /* driver defined */
-#define SLMSTAT_NOTALL 0x1c /* driver defined */
-
-static char *SLMErrors[] = {
- /* 0x00 */ "OK and ready",
- /* 0x01 */ NULL,
- /* 0x02 */ "ornery printer",
- /* 0x03 */ "toner empty",
- /* 0x04 */ "warming up",
- /* 0x05 */ "paper empty",
- /* 0x06 */ "drum empty",
- /* 0x07 */ "input jam",
- /* 0x08 */ "through jam",
- /* 0x09 */ "output jam",
- /* 0x0a */ "cover open",
- /* 0x0b */ "fuser malfunction",
- /* 0x0c */ "imager malfunction",
- /* 0x0d */ "motor malfunction",
- /* 0x0e */ "video malfunction",
- /* 0x0f */ NULL,
- /* 0x10 */ "printer system timeout",
- /* 0x11 */ NULL,
- /* 0x12 */ "invalid operation code",
- /* 0x13 */ NULL,
- /* 0x14 */ NULL,
- /* 0x15 */ "invalid device number",
- /* 0x16 */ NULL,
- /* 0x17 */ NULL,
- /* 0x18 */ NULL,
- /* 0x19 */ NULL,
- /* 0x1a */ "invalid parameter list",
- /* 0x1b */ "ACSI timeout",
- /* 0x1c */ "not all printed"
-};
-
-#define N_ERRORS (sizeof(SLMErrors)/sizeof(*SLMErrors))
-
-/* real (driver caused) error? */
-#define IS_REAL_ERROR(x) (x > 0x10)
-
-
-static struct {
- char *name;
- int w, h;
-} StdPageSize[] = {
- { "Letter", 2400, 3180 },
- { "Legal", 2400, 4080 },
- { "A4", 2336, 3386 },
- { "B5", 2016, 2914 }
-};
-
-#define N_STD_SIZES (sizeof(StdPageSize)/sizeof(*StdPageSize))
-
-#define SLM_BUFFER_SIZE (2336*3386/8) /* A4 for now */
-#define SLM_DMA_AMOUNT 255 /* #sectors to program the DMA for */
-
-#ifdef SLM_CONTINUOUS_DMA
-# define SLM_DMA_INT_OFFSET 0 /* DMA goes until seccnt 0, no offs */
-# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */
-# define SLM_SLICE_SIZE(w) (255*512)
-#else
-# define SLM_DMA_INT_OFFSET 32 /* 32 Byte ST-DMA FIFO */
-# define SLM_DMA_END_OFFSET 32 /* 32 Byte ST-DMA FIFO */
-# define SLM_SLICE_SIZE(w) ((254*512)/(w/8)*(w/8))
-#endif
-
-/* calculate the number of jiffies to wait for 'n' bytes */
-#ifdef SLM_CONT_CNT_REPROG
-#define DMA_TIME_FOR(n) 50
-#define DMA_STARTUP_TIME 0
-#else
-#define DMA_TIME_FOR(n) (n/1400-1)
-#define DMA_STARTUP_TIME 650
-#endif
-
-/***************************** Prototypes *****************************/
-
-static char *slm_errstr( int stat );
-static int slm_getstats( char *buffer, int device );
-static ssize_t slm_read( struct file* file, char *buf, size_t count, loff_t
- *ppos );
-static void start_print( int device );
-static irqreturn_t slm_interrupt(int irc, void *data);
-static void slm_test_ready( unsigned long dummy );
-static void set_dma_addr( unsigned long paddr );
-static unsigned long get_dma_addr( void );
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
- loff_t *ppos );
-static int slm_ioctl( struct inode *inode, struct file *file, unsigned int
- cmd, unsigned long arg );
-static int slm_open( struct inode *inode, struct file *file );
-static int slm_release( struct inode *inode, struct file *file );
-static int slm_req_sense( int device );
-static int slm_mode_sense( int device, char *buffer, int abs_flag );
-#if 0
-static int slm_mode_select( int device, char *buffer, int len, int
- default_flag );
-#endif
-static int slm_get_pagesize( int device, int *w, int *h );
-
-/************************* End of Prototypes **************************/
-
-
-static DEFINE_TIMER(slm_timer, slm_test_ready, 0, 0);
-
-static const struct file_operations slm_fops = {
- .owner = THIS_MODULE,
- .read = slm_read,
- .write = slm_write,
- .ioctl = slm_ioctl,
- .open = slm_open,
- .release = slm_release,
-};
-
-
-/* ---------------------------------------------------------------------- */
-/* Status Functions */
-
-
-static char *slm_errstr( int stat )
-
-{ char *p;
- static char str[22];
-
- stat &= 0x1f;
- if (stat >= 0 && stat < N_ERRORS && (p = SLMErrors[stat]))
- return( p );
- sprintf( str, "unknown status 0x%02x", stat );
- return( str );
-}
-
-
-static int slm_getstats( char *buffer, int device )
-
-{ int len = 0, stat, i, w, h;
- unsigned char buf[256];
-
- stat = slm_mode_sense( device, buf, 0 );
- if (IS_REAL_ERROR(stat))
- return( -EIO );
-
-#define SHORTDATA(i) ((buf[i] << 8) | buf[i+1])
-#define BOOLDATA(i,mask) ((buf[i] & mask) ? "on" : "off")
-
- w = SHORTDATA( 3 );
- h = SHORTDATA( 1 );
-
- len += sprintf( buffer+len, "Status\t\t%s\n",
- slm_errstr( stat ) );
- len += sprintf( buffer+len, "Page Size\t%dx%d",
- w, h );
-
- for( i = 0; i < N_STD_SIZES; ++i ) {
- if (w == StdPageSize[i].w && h == StdPageSize[i].h)
- break;
- }
- if (i < N_STD_SIZES)
- len += sprintf( buffer+len, " (%s)", StdPageSize[i].name );
- buffer[len++] = '\n';
-
- len += sprintf( buffer+len, "Top/Left Margin\t%d/%d\n",
- SHORTDATA( 5 ), SHORTDATA( 7 ) );
- len += sprintf( buffer+len, "Manual Feed\t%s\n",
- BOOLDATA( 9, 0x01 ) );
- len += sprintf( buffer+len, "Input Select\t%d\n",
- (buf[9] >> 1) & 7 );
- len += sprintf( buffer+len, "Auto Select\t%s\n",
- BOOLDATA( 9, 0x10 ) );
- len += sprintf( buffer+len, "Prefeed Paper\t%s\n",
- BOOLDATA( 9, 0x20 ) );
- len += sprintf( buffer+len, "Thick Pixels\t%s\n",
- BOOLDATA( 9, 0x40 ) );
- len += sprintf( buffer+len, "H/V Resol.\t%d/%d dpi\n",
- SHORTDATA( 12 ), SHORTDATA( 10 ) );
- len += sprintf( buffer+len, "System Timeout\t%d\n",
- buf[14] );
- len += sprintf( buffer+len, "Scan Time\t%d\n",
- SHORTDATA( 15 ) );
- len += sprintf( buffer+len, "Page Count\t%d\n",
- SHORTDATA( 17 ) );
- len += sprintf( buffer+len, "In/Out Cap.\t%d/%d\n",
- SHORTDATA( 19 ), SHORTDATA( 21 ) );
- len += sprintf( buffer+len, "Stagger Output\t%s\n",
- BOOLDATA( 23, 0x01 ) );
- len += sprintf( buffer+len, "Output Select\t%d\n",
- (buf[23] >> 1) & 7 );
- len += sprintf( buffer+len, "Duplex Print\t%s\n",
- BOOLDATA( 23, 0x10 ) );
- len += sprintf( buffer+len, "Color Sep.\t%s\n",
- BOOLDATA( 23, 0x20 ) );
-
- return( len );
-}
-
-
-static ssize_t slm_read( struct file *file, char *buf, size_t count,
- loff_t *ppos )
-
-{
- struct inode *node = file->f_path.dentry->d_inode;
- unsigned long page;
- int length;
- int end;
-
- if (!(page = __get_free_page( GFP_KERNEL )))
- return( -ENOMEM );
-
- length = slm_getstats( (char *)page, iminor(node) );
- if (length < 0) {
- count = length;
- goto out;
- }
- if (file->f_pos >= length) {
- count = 0;
- goto out;
- }
- if (count + file->f_pos > length)
- count = length - file->f_pos;
- end = count + file->f_pos;
- if (copy_to_user(buf, (char *)page + file->f_pos, count)) {
- count = -EFAULT;
- goto out;
- }
- file->f_pos = end;
-out: free_page( page );
- return( count );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* Printing */
-
-
-static void start_print( int device )
-
-{ struct slm *sip = &slm_info[device];
- unsigned char *cmd;
- unsigned long paddr;
- int i;
-
- stdma_lock( slm_interrupt, NULL );
-
- CMDSET_TARG_LUN( slmprint_cmd, sip->target, sip->lun );
- cmd = slmprint_cmd;
- paddr = virt_to_phys( SLMBuffer );
- dma_cache_maintenance( paddr, virt_to_phys(BufferP)-paddr, 1 );
- DISABLE_IRQ();
-
- /* Low on A1 */
- dma_wd.dma_mode_status = 0x88;
- MFPDELAY();
-
- /* send the command bytes except the last */
- for( i = 0; i < 5; ++i ) {
- DMA_LONG_WRITE( *cmd++, 0x8a );
- udelay(20);
- if (!acsi_wait_for_IRQ( HZ/2 )) {
- SLMError = 1;
- return; /* timeout */
- }
- }
- /* last command byte */
- DMA_LONG_WRITE( *cmd++, 0x82 );
- MFPDELAY();
- /* set DMA address */
- set_dma_addr( paddr );
- /* program DMA for write and select sector counter reg */
- dma_wd.dma_mode_status = 0x192;
- MFPDELAY();
- /* program for 255*512 bytes and start DMA */
- DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-
-#ifndef SLM_CONT_CNT_REPROG
- SLMCurAddr = paddr;
- SLMEndAddr = paddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
-#endif
- START_TIMER( DMA_STARTUP_TIME + DMA_TIME_FOR( SLMSliceSize ));
-#if !defined(SLM_CONT_CNT_REPROG) && defined(DEBUG)
- printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
- SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
-
- ENABLE_IRQ();
-}
-
-
-/* Only called when an error happened or at the end of a page */
-
-static irqreturn_t slm_interrupt(int irc, void *data)
-
-{ unsigned long addr;
- int stat;
-
- STOP_TIMER();
- addr = get_dma_addr();
- stat = acsi_getstatus();
- SLMError = (stat < 0) ? SLMSTAT_ACSITO :
- (addr < virt_to_phys(BufferP)) ? SLMSTAT_NOTALL :
- stat;
-
- dma_wd.dma_mode_status = 0x80;
- MFPDELAY();
-#ifdef DEBUG
- printk( "SLM: interrupt, addr=%#lx, error=%d\n", addr, SLMError );
-#endif
-
- wake_up( &print_wait );
- stdma_release();
- ENABLE_IRQ();
- return IRQ_HANDLED;
-}
-
-
-static void slm_test_ready( unsigned long dummy )
-
-{
-#ifdef SLM_CONT_CNT_REPROG
- /* program for 255*512 bytes again */
- dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
- START_TIMER( DMA_TIME_FOR(0) );
-#ifdef DEBUG
- printk( "SLM: reprogramming timer for %d jiffies, addr=%#lx\n",
- DMA_TIME_FOR(0), get_dma_addr() );
-#endif
-
-#else /* !SLM_CONT_CNT_REPROG */
-
- unsigned long flags, addr;
- int d, ti;
-#ifdef DEBUG
- struct timeval start_tm, end_tm;
- int did_wait = 0;
-#endif
-
- local_irq_save(flags);
-
- addr = get_dma_addr();
- if ((d = SLMEndAddr - addr) > 0) {
- local_irq_restore(flags);
-
- /* slice not yet finished, decide whether to start another timer or to
- * busy-wait */
- ti = DMA_TIME_FOR( d );
- if (ti > 0) {
-#ifdef DEBUG
- printk( "SLM: reprogramming timer for %d jiffies, rest %d bytes\n",
- ti, d );
-#endif
- START_TIMER( ti );
- return;
- }
- /* wait for desired end address to be reached */
-#ifdef DEBUG
- do_gettimeofday( &start_tm );
- did_wait = 1;
-#endif
- local_irq_disable();
- while( get_dma_addr() < SLMEndAddr )
- barrier();
- }
-
- /* slice finished, start next one */
- SLMCurAddr += SLMSliceSize;
-
-#ifdef SLM_CONTINUOUS_DMA
- /* program for 255*512 bytes again */
- dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
-#else
- /* set DMA address;
- * add 2 bytes for the ones in the SLM controller FIFO! */
- set_dma_addr( SLMCurAddr + 2 );
- /* toggle DMA to write and select sector counter reg */
- dma_wd.dma_mode_status = 0x92;
- MFPDELAY();
- dma_wd.dma_mode_status = 0x192;
- MFPDELAY();
- /* program for 255*512 bytes and start DMA */
- DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-#endif
-
- local_irq_restore(flags);
-
-#ifdef DEBUG
- if (did_wait) {
- int ms;
- do_gettimeofday( &end_tm );
- ms = (end_tm.tv_sec*1000000+end_tm.tv_usec) -
- (start_tm.tv_sec*1000000+start_tm.tv_usec);
- printk( "SLM: did %ld.%ld ms busy waiting for %d bytes\n",
- ms/1000, ms%1000, d );
- }
- else
- printk( "SLM: didn't wait (!)\n" );
-#endif
-
- if ((unsigned char *)PTOV( SLMCurAddr + SLMSliceSize ) >= BufferP) {
- /* will be last slice, no timer necessary */
-#ifdef DEBUG
- printk( "SLM: CurAddr=%#lx EndAddr=%#lx last slice -> no timer\n",
- SLMCurAddr, SLMEndAddr );
-#endif
- }
- else {
- /* not last slice */
- SLMEndAddr = SLMCurAddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
- START_TIMER( DMA_TIME_FOR( SLMSliceSize ));
-#ifdef DEBUG
- printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
- SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
- }
-#endif /* SLM_CONT_CNT_REPROG */
-}
-
-
-static void set_dma_addr( unsigned long paddr )
-
-{ unsigned long flags;
-
- local_irq_save(flags);
- dma_wd.dma_lo = (unsigned char)paddr;
- paddr >>= 8;
- MFPDELAY();
- dma_wd.dma_md = (unsigned char)paddr;
- paddr >>= 8;
- MFPDELAY();
- if (ATARIHW_PRESENT( EXTD_DMA ))
- st_dma_ext_dmahi = (unsigned short)paddr;
- else
- dma_wd.dma_hi = (unsigned char)paddr;
- MFPDELAY();
- local_irq_restore(flags);
-}
-
-
-static unsigned long get_dma_addr( void )
-
-{ unsigned long addr;
-
- addr = dma_wd.dma_lo & 0xff;
- MFPDELAY();
- addr |= (dma_wd.dma_md & 0xff) << 8;
- MFPDELAY();
- addr |= (dma_wd.dma_hi & 0xff) << 16;
- MFPDELAY();
-
- return( addr );
-}
-
-
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
- loff_t *ppos )
-
-{
- struct inode *node = file->f_path.dentry->d_inode;
- int device = iminor(node);
- int n, filled, w, h;
-
- while( SLMState == PRINTING ||
- (SLMState == FILLING && SLMBufOwner != device) ) {
- interruptible_sleep_on( &slm_wait );
- if (signal_pending(current))
- return( -ERESTARTSYS );
- }
- if (SLMState == IDLE) {
- /* first data of page: get current page size */
- if (slm_get_pagesize( device, &w, &h ))
- return( -EIO );
- BufferSize = w*h/8;
- if (BufferSize > SLM_BUFFER_SIZE)
- return( -ENOMEM );
-
- SLMState = FILLING;
- SLMBufOwner = device;
- }
-
- n = count;
- filled = BufferP - SLMBuffer;
- if (filled + n > BufferSize)
- n = BufferSize - filled;
-
- if (copy_from_user(BufferP, buf, n))
- return -EFAULT;
- BufferP += n;
- filled += n;
-
- if (filled == BufferSize) {
- /* Check the paper size again! The user may have switched it in the
- * time between starting the data and finishing them. Would end up in
- * a trashy page... */
- if (slm_get_pagesize( device, &w, &h ))
- return( -EIO );
- if (BufferSize != w*h/8) {
- printk( KERN_NOTICE "slm%d: page size changed while printing\n",
- device );
- return( -EAGAIN );
- }
-
- SLMState = PRINTING;
- /* choose a slice size that is a multiple of the line size */
-#ifndef SLM_CONT_CNT_REPROG
- SLMSliceSize = SLM_SLICE_SIZE(w);
-#endif
-
- start_print( device );
- sleep_on( &print_wait );
- if (SLMError && IS_REAL_ERROR(SLMError)) {
- printk( KERN_ERR "slm%d: %s\n", device, slm_errstr(SLMError) );
- n = -EIO;
- }
-
- SLMState = IDLE;
- BufferP = SLMBuffer;
- wake_up_interruptible( &slm_wait );
- }
-
- return( n );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* ioctl Functions */
-
-
-static int slm_ioctl( struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg )
-
-{ int device = iminor(inode), err;
-
- /* I can think of setting:
- * - manual feed
- * - paper format
- * - copy count
- * - ...
- * but haven't implemented that yet :-)
- * BTW, has anybody better docs about the MODE SENSE/MODE SELECT data?
- */
- switch( cmd ) {
-
- case SLMIORESET: /* reset buffer, i.e. empty the buffer */
- if (!(file->f_mode & 2))
- return( -EINVAL );
- if (SLMState == PRINTING)
- return( -EBUSY );
- SLMState = IDLE;
- BufferP = SLMBuffer;
- wake_up_interruptible( &slm_wait );
- return( 0 );
-
- case SLMIOGSTAT: { /* get status */
- int stat;
- char *str;
-
- stat = slm_req_sense( device );
- if (arg) {
- str = slm_errstr( stat );
- if (put_user(stat,
- (long *)&((struct SLM_status *)arg)->stat))
- return -EFAULT;
- if (copy_to_user( ((struct SLM_status *)arg)->str, str,
- strlen(str) + 1))
- return -EFAULT;
- }
- return( stat );
- }
-
- case SLMIOGPSIZE: { /* get paper size */
- int w, h;
-
- if ((err = slm_get_pagesize( device, &w, &h ))) return( err );
-
- if (put_user(w, (long *)&((struct SLM_paper_size *)arg)->width))
- return -EFAULT;
- if (put_user(h, (long *)&((struct SLM_paper_size *)arg)->height))
- return -EFAULT;
- return( 0 );
- }
-
- case SLMIOGMFEED: /* get manual feed */
- return( -EINVAL );
-
- case SLMIOSPSIZE: /* set paper size */
- return( -EINVAL );
-
- case SLMIOSMFEED: /* set manual feed */
- return( -EINVAL );
-
- }
- return( -EINVAL );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* Opening and Closing */
-
-
-static int slm_open( struct inode *inode, struct file *file )
-
-{ int device;
- struct slm *sip;
-
- device = iminor(inode);
- if (device >= N_SLM_Printers)
- return( -ENXIO );
- sip = &slm_info[device];
-
- if (file->f_mode & 2) {
- /* open for writing is exclusive */
- if ( !atomic_dec_and_test(&sip->wr_ok) ) {
- atomic_inc(&sip->wr_ok);
- return( -EBUSY );
- }
- }
- if (file->f_mode & 1) {
- /* open for reading is exclusive */
- if ( !atomic_dec_and_test(&sip->rd_ok) ) {
- atomic_inc(&sip->rd_ok);
- return( -EBUSY );
- }
- }
-
- return( 0 );
-}
-
-
-static int slm_release( struct inode *inode, struct file *file )
-
-{ int device;
- struct slm *sip;
-
- device = iminor(inode);
- sip = &slm_info[device];
-
- if (file->f_mode & 2)
- atomic_inc( &sip->wr_ok );
- if (file->f_mode & 1)
- atomic_inc( &sip->rd_ok );
-
- return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* ACSI Primitives for the SLM */
-
-
-static int slm_req_sense( int device )
-
-{ int stat, rv;
- struct slm *sip = &slm_info[device];
-
- stdma_lock( NULL, NULL );
-
- CMDSET_TARG_LUN( slmreqsense_cmd, sip->target, sip->lun );
- if (!acsicmd_nodma( slmreqsense_cmd, 0 ) ||
- (stat = acsi_getstatus()) < 0)
- rv = SLMSTAT_ACSITO;
- else
- rv = stat & 0x1f;
-
- ENABLE_IRQ();
- stdma_release();
- return( rv );
-}
-
-
-static int slm_mode_sense( int device, char *buffer, int abs_flag )
-
-{ unsigned char stat, len;
- int rv = 0;
- struct slm *sip = &slm_info[device];
-
- stdma_lock( NULL, NULL );
-
- CMDSET_TARG_LUN( slmmsense_cmd, sip->target, sip->lun );
- slmmsense_cmd[5] = abs_flag ? 0x80 : 0;
- if (!acsicmd_nodma( slmmsense_cmd, 0 )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- if (!acsi_extstatus( &stat, 1 )) {
- acsi_end_extstatus();
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- if (!acsi_extstatus( &len, 1 )) {
- acsi_end_extstatus();
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
- buffer[0] = len;
- if (!acsi_extstatus( buffer+1, len )) {
- acsi_end_extstatus();
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- acsi_end_extstatus();
- rv = stat & 0x1f;
-
- the_end:
- ENABLE_IRQ();
- stdma_release();
- return( rv );
-}
-
-
-#if 0
-/* currently unused */
-static int slm_mode_select( int device, char *buffer, int len,
- int default_flag )
-
-{ int stat, rv;
- struct slm *sip = &slm_info[device];
-
- stdma_lock( NULL, NULL );
-
- CMDSET_TARG_LUN( slmmselect_cmd, sip->target, sip->lun );
- slmmselect_cmd[5] = default_flag ? 0x80 : 0;
- if (!acsicmd_nodma( slmmselect_cmd, 0 )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
-
- if (!default_flag) {
- unsigned char c = len;
- if (!acsi_extcmd( &c, 1 )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
- if (!acsi_extcmd( buffer, len )) {
- rv = SLMSTAT_ACSITO;
- goto the_end;
- }
- }
-
- stat = acsi_getstatus();
- rv = (stat < 0 ? SLMSTAT_ACSITO : stat);
-
- the_end:
- ENABLE_IRQ();
- stdma_release();
- return( rv );
-}
-#endif
-
-
-static int slm_get_pagesize( int device, int *w, int *h )
-
-{ char buf[256];
- int stat;
-
- stat = slm_mode_sense( device, buf, 0 );
- ENABLE_IRQ();
- stdma_release();
-
- if (stat != SLMSTAT_OK)
- return( -EIO );
-
- *w = (buf[3] << 8) | buf[4];
- *h = (buf[1] << 8) | buf[2];
- return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* Initialization */
-
-
-int attach_slm( int target, int lun )
-
-{ static int did_register;
- int len;
-
- if (N_SLM_Printers >= MAX_SLM) {
- printk( KERN_WARNING "Too much SLMs\n" );
- return( 0 );
- }
-
- /* do an INQUIRY */
- udelay(100);
- CMDSET_TARG_LUN( slminquiry_cmd, target, lun );
- if (!acsicmd_nodma( slminquiry_cmd, 0 )) {
- inq_timeout:
- printk( KERN_ERR "SLM inquiry command timed out.\n" );
- inq_fail:
- acsi_end_extstatus();
- return( 0 );
- }
- /* read status and header of return data */
- if (!acsi_extstatus( SLMBuffer, 6 ))
- goto inq_timeout;
-
- if (SLMBuffer[1] != 2) { /* device type == printer? */
- printk( KERN_ERR "SLM inquiry returned device type != printer\n" );
- goto inq_fail;
- }
- len = SLMBuffer[5];
-
- /* read id string */
- if (!acsi_extstatus( SLMBuffer, len ))
- goto inq_timeout;
- acsi_end_extstatus();
- SLMBuffer[len] = 0;
-
- if (!did_register) {
- did_register = 1;
- }
-
- slm_info[N_SLM_Printers].target = target;
- slm_info[N_SLM_Printers].lun = lun;
- atomic_set(&slm_info[N_SLM_Printers].wr_ok, 1 );
- atomic_set(&slm_info[N_SLM_Printers].rd_ok, 1 );
-
- printk( KERN_INFO " Printer: %s\n", SLMBuffer );
- printk( KERN_INFO "Detected slm%d at id %d lun %d\n",
- N_SLM_Printers, target, lun );
- N_SLM_Printers++;
- return( 1 );
-}
-
-int slm_init( void )
-
-{
- int i;
- if (register_chrdev( ACSI_MAJOR, "slm", &slm_fops )) {
- printk( KERN_ERR "Unable to get major %d for ACSI SLM\n", ACSI_MAJOR );
- return -EBUSY;
- }
-
- if (!(SLMBuffer = atari_stram_alloc( SLM_BUFFER_SIZE, "SLM" ))) {
- printk( KERN_ERR "Unable to get SLM ST-Ram buffer.\n" );
- unregister_chrdev( ACSI_MAJOR, "slm" );
- return -ENOMEM;
- }
- BufferP = SLMBuffer;
- SLMState = IDLE;
-
- return 0;
-}
-
-#ifdef MODULE
-
-/* from acsi.c */
-void acsi_attach_SLMs( int (*attach_func)( int, int ) );
-
-int init_module(void)
-{
- int err;
-
- if ((err = slm_init()))
- return( err );
- /* This calls attach_slm() for every target/lun where acsi.c detected a
- * printer */
- acsi_attach_SLMs( attach_slm );
- return( 0 );
-}
-
-void cleanup_module(void)
-{
- if (unregister_chrdev( ACSI_MAJOR, "slm" ) != 0)
- printk( KERN_ERR "acsi_slm: cleanup_module failed\n");
- atari_stram_free( SLMBuffer );
-}
-#endif
--- linux-2.6.22-rc6-mm1/drivers/net/atari_bionet.c 2007-06-28 14:53:05.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,675 +0,0 @@
-/* bionet.c BioNet-100 device driver for linux68k.
- *
- * Version: @(#)bionet.c 1.0 02/06/96
- *
- * Author: Hartmut Laue <laue@...-mp.uni-kiel.de>
- * and Torsten Narjes <narjes@...-mp.uni-kiel.de>
- *
- * Little adaptions for integration into pl7 by Roman Hodek
- *
- * Some changes in bionet_poll_rx by Karl-Heinz Lohner
- *
- What is it ?
- ------------
- This driver controls the BIONET-100 LAN-Adapter which connects
- an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
-
- This version can be compiled as a loadable module (See the
- compile command at the bottom of this file).
- At load time, you can optionally set the debugging level and the
- fastest response time on the command line of 'insmod'.
-
- 'bionet_debug'
- controls the amount of diagnostic messages:
- 0 : no messages
- >0 : see code for meaning of printed messages
-
- 'bionet_min_poll_time' (always >=1)
- gives the time (in jiffies) between polls. Low values
- increase the system load (beware!)
-
- When loaded, a net device with the name 'bio0' becomes available,
- which can be controlled with the usual 'ifconfig' command.
-
- It is possible to compile this driver into the kernel like other
- (net) drivers. For this purpose, some source files (e.g. config-files
- makefiles, Space.c) must be changed accordingly. (You may refer to
- other drivers how to do it.) In this case, the device will be detected
- at boot time and (probably) appear as 'eth0'.
-
- This code is based on several sources:
- - The driver code for a parallel port ethernet adapter by
- Donald Becker (see file 'atp.c' from the PC linux distribution)
- - The ACSI code by Roman Hodek for the ATARI-ACSI harddisk support
- and DMA handling.
- - Very limited information about moving packets in and out of the
- BIONET-adapter from the TCP package for TOS by BioData GmbH.
-
- Theory of Operation
- -------------------
- Because the ATARI DMA port is usually shared between several
- devices (eg. harddisk, floppy) we cannot block the ACSI bus
- while waiting for interrupts. Therefore we use a polling mechanism
- to fetch packets from the adapter. For the same reason, we send
- packets without checking that the previous packet has been sent to
- the LAN. We rely on the higher levels of the networking code to detect
- missing packets and resend them.
-
- Before we access the ATARI DMA controller, we check if another
- process is using the DMA. If not, we lock the DMA, perform one or
- more packet transfers and unlock the DMA before returning.
- We do not use 'stdma_lock' unconditionally because it is unclear
- if the networking code can be set to sleep, which will happen if
- another (possibly slow) device is using the DMA controller.
-
- The polling is done via timer interrupts which periodically
- 'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
- between polls varies depending on an estimate of the net activity.
- The allowed range is given by the variable 'bionet_min_poll_time'
- for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
- for the higher (slowest) limit.
-
- Whenever a packet arrives, we switch to fastest response by setting
- the polling time to its lowest limit. If the following poll fails,
- because no packets have arrived, we increase the time for the next
- poll. When the net activity is low, the polling time effectively
- stays at its maximum value, resulting in the lowest load for the
- machine.
- */
-
-#define MAX_POLL_TIME 10
-
-static char version[] =
- "bionet.c:v1.0 06-feb-96 (c) Hartmut Laue.\n";
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-
-
-/* use 0 for production, 1 for verification, >2 for debug
- */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-/*
- * Global variable 'bionet_debug'. Can be set at load time by 'insmod'
- */
-unsigned int bionet_debug = NET_DEBUG;
-module_param(bionet_debug, int, 0);
-MODULE_PARM_DESC(bionet_debug, "bionet debug level (0-2)");
-MODULE_LICENSE("GPL");
-
-static unsigned int bionet_min_poll_time = 2;
-
-
-/* Information that need to be kept for each board.
- */
-struct net_local {
- struct net_device_stats stats;
- long open_time; /* for debugging */
- int poll_time; /* polling time varies with net load */
-};
-
-static struct nic_pkt_s { /* packet format */
- unsigned char status;
- unsigned char dummy;
- unsigned char l_lo, l_hi;
- unsigned char buffer[3000];
-} *nic_packet;
-unsigned char *phys_nic_packet;
-
-/* Index to functions, as function prototypes.
- */
-static int bionet_open(struct net_device *dev);
-static int bionet_send_packet(struct sk_buff *skb, struct net_device *dev);
-static void bionet_poll_rx(struct net_device *);
-static int bionet_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void bionet_tick(unsigned long);
-
-static DEFINE_TIMER(bionet_timer, bionet_tick, 0, 0);
-
-#define STRAM_ADDR(a) (((a) & 0xff000000) == 0)
-
-/* The following routines access the ethernet board connected to the
- * ACSI port via the st_dma chip.
- */
-#define NODE_ADR 0x60
-
-#define C_READ 8
-#define C_WRITE 0x0a
-#define C_GETEA 0x0f
-#define C_SETCR 0x0e
-
-static int
-sendcmd(unsigned int a0, unsigned int mod, unsigned int cmd) {
- unsigned int c;
-
- dma_wd.dma_mode_status = (mod | ((a0) ? 2 : 0) | 0x88);
- dma_wd.fdc_acces_seccount = cmd;
- dma_wd.dma_mode_status = (mod | 0x8a);
-
- if( !acsi_wait_for_IRQ(HZ/2) ) /* wait for cmd ack */
- return -1; /* timeout */
-
- c = dma_wd.fdc_acces_seccount;
- return (c & 0xff);
-}
-
-
-static void
-set_status(int cr) {
- sendcmd(0,0x100,NODE_ADR | C_SETCR); /* CMD: SET CR */
- sendcmd(1,0x100,cr);
-
- dma_wd.dma_mode_status = 0x80;
-}
-
-static int
-get_status(unsigned char *adr) {
- int i,c;
-
- DISABLE_IRQ();
- c = sendcmd(0,0x00,NODE_ADR | C_GETEA); /* CMD: GET ETH ADR*/
- if( c < 0 ) goto gsend;
-
- /* now read status bytes */
-
- for (i=0; i<6; i++) {
- dma_wd.fdc_acces_seccount = 0; /* request next byte */
-
- if( !acsi_wait_for_IRQ(HZ/2) ) { /* wait for cmd ack */
- c = -1;
- goto gsend; /* timeout */
- }
- c = dma_wd.fdc_acces_seccount;
- *adr++ = (unsigned char)c;
- }
- c = 1;
-gsend:
- dma_wd.dma_mode_status = 0x80;
- return c;
-}
-
-static irqreturn_t
-bionet_intr(int irq, void *data) {
- return IRQ_HANDLED;
-}
-
-
-static int
-get_frame(unsigned long paddr, int odd) {
- int c;
- unsigned long flags;
-
- DISABLE_IRQ();
- local_irq_save(flags);
-
- dma_wd.dma_mode_status = 0x9a;
- dma_wd.dma_mode_status = 0x19a;
- dma_wd.dma_mode_status = 0x9a;
- dma_wd.fdc_acces_seccount = 0x04; /* sector count (was 5) */
- dma_wd.dma_lo = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_md = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_hi = (unsigned char)paddr;
- local_irq_restore(flags);
-
- c = sendcmd(0,0x00,NODE_ADR | C_READ); /* CMD: READ */
- if( c < 128 ) goto rend;
-
- /* now read block */
-
- c = sendcmd(1,0x00,odd); /* odd flag for address shift */
- dma_wd.dma_mode_status = 0x0a;
-
- if( !acsi_wait_for_IRQ(100) ) { /* wait for DMA to complete */
- c = -1;
- goto rend;
- }
- dma_wd.dma_mode_status = 0x8a;
- dma_wd.dma_mode_status = 0x18a;
- dma_wd.dma_mode_status = 0x8a;
- c = dma_wd.fdc_acces_seccount;
-
- dma_wd.dma_mode_status = 0x88;
- c = dma_wd.fdc_acces_seccount;
- c = 1;
-
-rend:
- dma_wd.dma_mode_status = 0x80;
- udelay(40);
- acsi_wait_for_noIRQ(20);
- return c;
-}
-
-
-static int
-hardware_send_packet(unsigned long paddr, int cnt) {
- unsigned int c;
- unsigned long flags;
-
- DISABLE_IRQ();
- local_irq_save(flags);
-
- dma_wd.dma_mode_status = 0x19a;
- dma_wd.dma_mode_status = 0x9a;
- dma_wd.dma_mode_status = 0x19a;
- dma_wd.dma_lo = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_md = (unsigned char)paddr;
- paddr >>= 8;
- dma_wd.dma_hi = (unsigned char)paddr;
-
- dma_wd.fdc_acces_seccount = 0x4; /* sector count */
- local_irq_restore(flags);
-
- c = sendcmd(0,0x100,NODE_ADR | C_WRITE); /* CMD: WRITE */
- c = sendcmd(1,0x100,cnt&0xff);
- c = sendcmd(1,0x100,cnt>>8);
-
- /* now write block */
-
- dma_wd.dma_mode_status = 0x10a; /* DMA enable */
- if( !acsi_wait_for_IRQ(100) ) /* wait for DMA to complete */
- goto end;
-
- dma_wd.dma_mode_status = 0x19a; /* DMA disable ! */
- c = dma_wd.fdc_acces_seccount;
-
-end:
- c = sendcmd(1,0x100,0);
- c = sendcmd(1,0x100,0);
-
- dma_wd.dma_mode_status = 0x180;
- udelay(40);
- acsi_wait_for_noIRQ(20);
- return( c & 0x02);
-}
-
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
- */
-struct net_device * __init bionet_probe(int unit)
-{
- struct net_device *dev;
- unsigned char station_addr[6];
- static unsigned version_printed;
- static int no_more_found; /* avoid "Probing for..." printed 4 times */
- int i;
- int err;
-
- if (!MACH_IS_ATARI || no_more_found)
- return ERR_PTR(-ENODEV);
-
- dev = alloc_etherdev(sizeof(struct net_local));
- if (!dev)
- return ERR_PTR(-ENOMEM);
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
- SET_MODULE_OWNER(dev);
-
- printk("Probing for BioNet 100 Adapter...\n");
-
- stdma_lock(bionet_intr, NULL);
- i = get_status(station_addr); /* Read the station address PROM. */
- ENABLE_IRQ();
- stdma_release();
-
- /* Check the first three octets of the S.A. for the manufactor's code.
- */
-
- if( i < 0
- || station_addr[0] != 'B'
- || station_addr[1] != 'I'
- || station_addr[2] != 'O' ) {
- no_more_found = 1;
- printk( "No BioNet 100 found.\n" );
- free_netdev(dev);
- return ERR_PTR(-ENODEV);
- }
-
- if (bionet_debug > 0 && version_printed++ == 0)
- printk(version);
-
- printk("%s: %s found, eth-addr: %02x-%02x-%02x:%02x-%02x-%02x.\n",
- dev->name, "BioNet 100",
- station_addr[0], station_addr[1], station_addr[2],
- station_addr[3], station_addr[4], station_addr[5]);
-
- /* Initialize the device structure. */
-
- nic_packet = (struct nic_pkt_s *)acsi_buffer;
- phys_nic_packet = (unsigned char *)phys_acsi_buffer;
- if (bionet_debug > 0) {
- printk("nic_packet at 0x%p, phys at 0x%p\n",
- nic_packet, phys_nic_packet );
- }
-
- dev->open = bionet_open;
- dev->stop = bionet_close;
- dev->hard_start_xmit = bionet_send_packet;
- dev->get_stats = net_get_stats;
-
- /* Fill in the fields of the device structure with ethernet-generic
- * values. This should be in a common file instead of per-driver.
- */
-
- for (i = 0; i < ETH_ALEN; i++) {
-#if 0
- dev->broadcast[i] = 0xff;
-#endif
- dev->dev_addr[i] = station_addr[i];
- }
- err = register_netdev(dev);
- if (!err)
- return dev;
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
- */
-static int
-bionet_open(struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
-
- if (bionet_debug > 0)
- printk("bionet_open\n");
- stdma_lock(bionet_intr, NULL);
-
- /* Reset the hardware here.
- */
- set_status(4);
- lp->open_time = 0; /*jiffies*/
- lp->poll_time = MAX_POLL_TIME;
-
- dev->tbusy = 0;
- dev->interrupt = 0;
- dev->start = 1;
-
- stdma_release();
- bionet_timer.data = (long)dev;
- bionet_timer.expires = jiffies + lp->poll_time;
- add_timer(&bionet_timer);
- return 0;
-}
-
-static int
-bionet_send_packet(struct sk_buff *skb, struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- /* Block a timer-based transmit from overlapping. This could better be
- * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
- */
- local_irq_save(flags);
-
- if (stdma_islocked()) {
- local_irq_restore(flags);
- lp->stats.tx_errors++;
- }
- else {
- int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
- unsigned long buf = virt_to_phys(skb->data);
- int stat;
-
- stdma_lock(bionet_intr, NULL);
- local_irq_restore(flags);
- if( !STRAM_ADDR(buf+length-1) ) {
- skb_copy_from_linear_data(skb, nic_packet->buffer,
- length);
- buf = (unsigned long)&((struct nic_pkt_s *)phys_nic_packet)->buffer;
- }
-
- if (bionet_debug >1) {
- u_char *data = nic_packet->buffer, *p;
- int i;
-
- printk( "%s: TX pkt type 0x%4x from ", dev->name,
- ((u_short *)data)[6]);
-
- for( p = &data[6], i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" );
- printk(" to ");
-
- for( p = data, i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
-
- printk( "%s: ", dev->name );
- printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
- " %02x%02x%02x%02x len %d\n",
- data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
- data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
- data[28], data[29], data[30], data[31], data[32], data[33],
- length );
- }
- dma_cache_maintenance(buf, length, 1);
-
- stat = hardware_send_packet(buf, length);
- ENABLE_IRQ();
- stdma_release();
-
- dev->trans_start = jiffies;
- dev->tbusy = 0;
- lp->stats.tx_packets++;
- lp->stats.tx_bytes+=length;
- }
- dev_kfree_skb(skb);
-
- return 0;
-}
-
-/* We have a good packet(s), get it/them out of the buffers.
- */
-static void
-bionet_poll_rx(struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
- int boguscount = 10;
- int pkt_len, status;
- unsigned long flags;
-
- local_irq_save(flags);
- /* ++roman: Take care at locking the ST-DMA... This must be done with ints
- * off, since otherwise an int could slip in between the question and the
- * locking itself, and then we'd go to sleep... And locking itself is
- * necessary to keep the floppy_change timer from working with ST-DMA
- * registers. */
- if (stdma_islocked()) {
- local_irq_restore(flags);
- return;
- }
- stdma_lock(bionet_intr, NULL);
- DISABLE_IRQ();
- local_irq_restore(flags);
-
- if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
-
- while(boguscount--) {
- status = get_frame((unsigned long)phys_nic_packet, 0);
-
- if( status == 0 ) break;
-
- /* Good packet... */
-
- dma_cache_maintenance((unsigned long)phys_nic_packet, 1520, 0);
-
- pkt_len = (nic_packet->l_hi << 8) | nic_packet->l_lo;
-
- lp->poll_time = bionet_min_poll_time; /* fast poll */
- if( pkt_len >= 60 && pkt_len <= 1520 ) {
- /* ^^^^ war 1514 KHL */
- /* Malloc up new buffer.
- */
- struct sk_buff *skb = dev_alloc_skb( pkt_len + 2 );
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n",
- dev->name);
- lp->stats.rx_dropped++;
- break;
- }
-
- skb_reserve( skb, 2 ); /* 16 Byte align */
- skb_put( skb, pkt_len ); /* make room */
-
- /* 'skb->data' points to the start of sk_buff data area.
- */
- skb_copy_to_linear_data(skb, nic_packet->buffer,
- pkt_len);
- skb->protocol = eth_type_trans( skb, dev );
- netif_rx(skb);
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes+=pkt_len;
-
- /* If any worth-while packets have been received, dev_rint()
- has done a mark_bh(INET_BH) for us and will work on them
- when we get to the bottom-half routine.
- */
-
- if (bionet_debug >1) {
- u_char *data = nic_packet->buffer, *p;
- int i;
-
- printk( "%s: RX pkt type 0x%4x from ", dev->name,
- ((u_short *)data)[6]);
-
-
- for( p = &data[6], i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" );
- printk(" to ");
- for( p = data, i = 0; i < 6; i++ )
- printk("%02x%s", *p++,i != 5 ? ":" : "" "\n" );
-
- printk( "%s: ", dev->name );
- printk(" data %02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x"
- " %02x%02x%02x%02x len %d\n",
- data[12], data[13], data[14], data[15], data[16], data[17], data[18], data[19],
- data[20], data[21], data[22], data[23], data[24], data[25], data[26], data[27],
- data[28], data[29], data[30], data[31], data[32], data[33],
- pkt_len );
- }
- }
- else {
- printk(" Packet has wrong length: %04d bytes\n", pkt_len);
- lp->stats.rx_errors++;
- }
- }
- stdma_release();
- ENABLE_IRQ();
- return;
-}
-
-/* bionet_tick: called by bionet_timer. Reads packets from the adapter,
- * passes them to the higher layers and restarts the timer.
- */
-static void
-bionet_tick(unsigned long data) {
- struct net_device *dev = (struct net_device *)data;
- struct net_local *lp = netdev_priv(dev);
-
- if( bionet_debug > 0 && (lp->open_time++ & 7) == 8 )
- printk("bionet_tick: %ld\n", lp->open_time);
-
- if( !stdma_islocked() ) bionet_poll_rx(dev);
-
- bionet_timer.expires = jiffies + lp->poll_time;
- add_timer(&bionet_timer);
-}
-
-/* The inverse routine to bionet_open().
- */
-static int
-bionet_close(struct net_device *dev) {
- struct net_local *lp = netdev_priv(dev);
-
- if (bionet_debug > 0)
- printk("bionet_close, open_time=%ld\n", lp->open_time);
- del_timer(&bionet_timer);
- stdma_lock(bionet_intr, NULL);
-
- set_status(0);
- lp->open_time = 0;
-
- dev->tbusy = 1;
- dev->start = 0;
-
- stdma_release();
- return 0;
-}
-
-/* Get the current statistics.
- This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- return &lp->stats;
-}
-
-
-#ifdef MODULE
-
-static struct net_device *bio_dev;
-
-int init_module(void)
-{
- bio_dev = bionet_probe(-1);
- if (IS_ERR(bio_dev))
- return PTR_ERR(bio_dev);
- return 0;
-}
-
-void cleanup_module(void)
-{
- unregister_netdev(bio_dev);
- free_netdev(bio_dev);
-}
-
-#endif /* MODULE */
-
-/* Local variables:
- * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
- -b m68k-linuxaout -Wall -Wstrict-prototypes -O2
- -fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c bionet.c"
- * version-control: t
- * kept-new-versions: 5
- * tab-width: 8
- * End:
- */
--- linux-2.6.22-rc6-mm1/drivers/net/atari_pamsnet.c 2007-06-28 14:54:31.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,878 +0,0 @@
-/* atari_pamsnet.c PAMsNet device driver for linux68k.
- *
- * Version: @(#)PAMsNet.c 0.2� 03/31/96
- *
- * Author: Torsten Lang <Torsten.Lang@...physik.uni-giessen.de>
- * <Torsten.Lang@...g.de>
- *
- * This driver is based on my driver PAMSDMA.c for MiNT-Net and
- * on the driver bionet.c written by
- * Hartmut Laue <laue@...-mp.uni-kiel.de>
- * and Torsten Narjes <narjes@...-mp.uni-kiel.de>
- *
- * Little adaptions for integration into pl7 by Roman Hodek
- *
- What is it ?
- ------------
- This driver controls the PAMsNet LAN-Adapter which connects
- an ATARI ST/TT via the ACSI-port to an Ethernet-based network.
-
- This version can be compiled as a loadable module (See the
- compile command at the bottom of this file).
- At load time, you can optionally set the debugging level and the
- fastest response time on the command line of 'insmod'.
-
- 'pamsnet_debug'
- controls the amount of diagnostic messages:
- 0 : no messages
- >0 : see code for meaning of printed messages
-
- 'pamsnet_min_poll_time' (always >=1)
- gives the time (in jiffies) between polls. Low values
- increase the system load (beware!)
-
- When loaded, a net device with the name 'eth?' becomes available,
- which can be controlled with the usual 'ifconfig' command.
-
- It is possible to compile this driver into the kernel like other
- (net) drivers. For this purpose, some source files (e.g. config-files
- makefiles, Space.c) must be changed accordingly. (You may refer to
- other drivers how to do it.) In this case, the device will be detected
- at boot time and (probably) appear as 'eth0'.
-
- Theory of Operation
- -------------------
- Because the ATARI DMA port is usually shared between several
- devices (eg. harddisk, floppy) we cannot block the ACSI bus
- while waiting for interrupts. Therefore we use a polling mechanism
- to fetch packets from the adapter. For the same reason, we send
- packets without checking that the previous packet has been sent to
- the LAN. We rely on the higher levels of the networking code to detect
- missing packets and resend them.
-
- Before we access the ATARI DMA controller, we check if another
- process is using the DMA. If not, we lock the DMA, perform one or
- more packet transfers and unlock the DMA before returning.
- We do not use 'stdma_lock' unconditionally because it is unclear
- if the networking code can be set to sleep, which will happen if
- another (possibly slow) device is using the DMA controller.
-
- The polling is done via timer interrupts which periodically
- 'simulate' an interrupt from the Ethernet adapter. The time (in jiffies)
- between polls varies depending on an estimate of the net activity.
- The allowed range is given by the variable 'bionet_min_poll_time'
- for the lower (fastest) limit and the constant 'MAX_POLL_TIME'
- for the higher (slowest) limit.
-
- Whenever a packet arrives, we switch to fastest response by setting
- the polling time to its lowest limit. If the following poll fails,
- because no packets have arrived, we increase the time for the next
- poll. When the net activity is low, the polling time effectively
- stays at its maximum value, resulting in the lowest load for the
- machine.
- */
-
-#define MAX_POLL_TIME 10
-
-static char *version =
- "pamsnet.c:v0.2beta 30-mar-96 (c) Torsten Lang.\n";
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/bitops.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/errno.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_acsi.h>
-
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#undef READ
-#undef WRITE
-
-/* use 0 for production, 1 for verification, >2 for debug
- */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-/*
- * Global variable 'pamsnet_debug'. Can be set at load time by 'insmod'
- */
-unsigned int pamsnet_debug = NET_DEBUG;
-module_param(pamsnet_debug, int, 0);
-MODULE_PARM_DESC(pamsnet_debug, "pamsnet debug enable (0-1)");
-MODULE_LICENSE("GPL");
-
-static unsigned int pamsnet_min_poll_time = 2;
-
-
-/* Information that need to be kept for each board.
- */
-struct net_local {
- struct net_device_stats stats;
- long open_time; /* for debugging */
- int poll_time; /* polling time varies with net load */
-};
-
-static struct nic_pkt_s { /* packet format */
- unsigned char buffer[2048];
-} *nic_packet = 0;
-unsigned char *phys_nic_packet;
-
-typedef unsigned char HADDR[6]; /* 6-byte hardware address of lance */
-
-/* Index to functions, as function prototypes.
- */
-static void start (int target);
-static int stop (int target);
-static int testpkt (int target);
-static int sendpkt (int target, unsigned char *buffer, int length);
-static int receivepkt (int target, unsigned char *buffer);
-static int inquiry (int target, unsigned char *buffer);
-static HADDR *read_hw_addr(int target, unsigned char *buffer);
-static void setup_dma (void *address, unsigned rw_flag, int num_blocks);
-static int send_first (int target, unsigned char byte);
-static int send_1_5 (int lun, unsigned char *command, int dma);
-static int get_status (void);
-static int calc_received (void *start_address);
-
-static int pamsnet_open(struct net_device *dev);
-static int pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev);
-static void pamsnet_poll_rx(struct net_device *);
-static int pamsnet_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void pamsnet_tick(unsigned long);
-
-static irqreturn_t pamsnet_intr(int irq, void *data);
-
-static DEFINE_TIMER(pamsnet_timer, pamsnet_tick, 0, 0);
-
-#define STRAM_ADDR(a) (((a) & 0xff000000) == 0)
-
-typedef struct
-{
- unsigned char reserved1[0x38];
- HADDR hwaddr;
- unsigned char reserved2[0x1c2];
-} DMAHWADDR;
-
-/*
- * Definitions of commands understood by the PAMs DMA adaptor.
- *
- * In general the DMA adaptor uses LUN 0, 5, 6 and 7 on one ID changeable
- * by the PAM's Net software.
- *
- * LUN 0 works as a harddisk. You can boot the PAM's Net driver there.
- * LUN 5 works as a harddisk and lets you access the RAM and some I/O HW
- * area. In sector 0, bytes 0x38-0x3d you find the ethernet HW address
- * of the adaptor.
- * LUN 6 works as a harddisk and lets you access the firmware ROM.
- * LUN 7 lets you send and receive packets.
- *
- * Some commands like the INQUIRY command work identical on all used LUNs.
- *
- * UNKNOWN1 seems to read some data.
- * Command length is 6 bytes.
- * UNKNOWN2 seems to read some data (command byte 1 must be !=0). The
- * following bytes seem to be something like an allocation length.
- * Command length is 6 bytes.
- * READPKT reads a packet received by the DMA adaptor.
- * Command length is 6 bytes.
- * WRITEPKT sends a packet transferred by the following DMA phase. The length
- * of the packet is transferred in command bytes 3 and 4.
- * The adaptor automatically replaces the src hw address in an ethernet
- * packet by its own hw address.
- * Command length is 6 bytes.
- * INQUIRY has the same function as the INQUIRY command supported by harddisks
- * and other SCSI devices. It lets you detect which device you found
- * at a given address.
- * Command length is 6 bytes.
- * START initializes the DMA adaptor. After this command it is able to send
- * and receive packets. There is no status byte returned!
- * Command length is 1 byte.
- * NUMPKTS gives back the number of received packets waiting in the queue in
- * the status byte.
- * Command length is 1 byte.
- * UNKNOWN3
- * UNKNOWN4 Function of these three commands is unknown.
- * UNKNOWN5 The command length of these three commands is 1 byte.
- * DESELECT immediately deselects the DMA adaptor. May important with interrupt
- * driven operation.
- * Command length is 1 byte.
- * STOP resets the DMA adaptor. After this command packets can no longer
- * be received or transferred.
- * Command length is 6 byte.
- */
-
-enum {UNKNOWN1=3, READPKT=8, UNKNOWN2, WRITEPKT=10, INQUIRY=18, START,
- NUMPKTS=22, UNKNOWN3, UNKNOWN4, UNKNOWN5, DESELECT, STOP};
-
-#define READSECTOR READPKT
-#define WRITESECTOR WRITEPKT
-
-u_char *inquire8="MV PAM's NET/GK";
-
-#define DMALOW dma_wd.dma_lo
-#define DMAMID dma_wd.dma_md
-#define DMAHIGH dma_wd.dma_hi
-#define DACCESS dma_wd.fdc_acces_seccount
-
-#define MFP_GPIP mfp.par_dt_reg
-
-/* Some useful functions */
-
-#define INT (!(MFP_GPIP & 0x20))
-#define DELAY ({MFP_GPIP; MFP_GPIP; MFP_GPIP;})
-#define WRITEMODE(value) \
- ({ u_short dummy = value; \
- __asm__ volatile("movew %0, 0xFFFF8606" : : "d"(dummy)); \
- DELAY; \
- })
-#define WRITEBOTH(value1, value2) \
- ({ u_long dummy = (u_long)(value1)<<16 | (u_short)(value2); \
- __asm__ volatile("movel %0, 0xFFFF8604" : : "d"(dummy)); \
- DELAY; \
- })
-
-/* Definitions for DMODE */
-
-#define READ 0x000
-#define WRITE 0x100
-
-#define DMA_FDC 0x080
-#define DMA_ACSI 0x000
-
-#define DMA_DISABLE 0x040
-
-#define SEC_COUNT 0x010
-#define DMA_WINDOW 0x000
-
-#define REG_ACSI 0x008
-#define REG_FDC 0x000
-
-#define A1 0x002
-
-/* Timeout constants */
-
-#define TIMEOUTCMD HZ/2 /* ca. 500ms */
-#define TIMEOUTDMA HZ /* ca. 1s */
-#define COMMAND_DELAY 500 /* ca. 0.5ms */
-
-unsigned rw;
-int lance_target = -1;
-int if_up = 0;
-
-/* The following routines access the ethernet board connected to the
- * ACSI port via the st_dma chip.
- */
-
-/* The following lowlevel routines work on physical addresses only and assume
- * that eventually needed buffers are
- * - completely located in ST RAM
- * - are contigous in the physical address space
- */
-
-/* Setup the DMA counter */
-
-static void
-setup_dma (void *address, unsigned rw_flag, int num_blocks)
-{
- WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
- A1);
- WRITEMODE((unsigned)(rw_flag ^ WRITE) | DMA_FDC | SEC_COUNT | REG_ACSI |
- A1);
- WRITEMODE((unsigned) rw_flag | DMA_FDC | SEC_COUNT | REG_ACSI |
- A1);
- DMALOW = (unsigned char)((unsigned long)address & 0xFF);
- DMAMID = (unsigned char)(((unsigned long)address >> 8) & 0xFF);
- DMAHIGH = (unsigned char)(((unsigned long)address >> 16) & 0xFF);
- WRITEBOTH((unsigned)num_blocks & 0xFF,
- rw_flag | DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
- rw = rw_flag;
-}
-
-/* Send the first byte of an command block */
-
-static int
-send_first (int target, unsigned char byte)
-{
- rw = READ;
- acsi_delay_end(COMMAND_DELAY);
- /*
- * wake up ACSI
- */
- WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI);
- /*
- * write command byte
- */
- WRITEBOTH((target << 5) | (byte & 0x1F), DMA_FDC |
- DMA_WINDOW | REG_ACSI | A1);
- return (!acsi_wait_for_IRQ(TIMEOUTCMD));
-}
-
-/* Send the rest of an command block */
-
-static int
-send_1_5 (int lun, unsigned char *command, int dma)
-{
- int i, j;
-
- for (i=0; i<5; i++) {
- WRITEBOTH((!i ? (((lun & 0x7) << 5) | (command[i] & 0x1F))
- : command[i]),
- rw | REG_ACSI | DMA_WINDOW |
- ((i < 4) ? DMA_FDC
- : (dma ? DMA_ACSI
- : DMA_FDC)) | A1);
- if (i < 4 && (j = !acsi_wait_for_IRQ(TIMEOUTCMD)))
- return (j);
- }
- return (0);
-}
-
-/* Read a status byte */
-
-static int
-get_status (void)
-{
- WRITEMODE(DMA_FDC | DMA_WINDOW | REG_ACSI | A1);
- acsi_delay_start();
- return ((int)(DACCESS & 0xFF));
-}
-
-/* Calculate the number of received bytes */
-
-static int
-calc_received (void *start_address)
-{
- return (int)(
- (((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
- - (unsigned long)start_address);
-}
-
-/* The following midlevel routines still work on physical addresses ... */
-
-/* start() starts the PAM's DMA adaptor */
-
-static void
-start (int target)
-{
- send_first(target, START);
-}
-
-/* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
-
-static int
-stop (int target)
-{
- int ret = -1;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, STOP))
- goto bad;
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] =
- cmd_buffer[3] = cmd_buffer[4] = 0;
- if (send_1_5(7, cmd_buffer, 0) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = 0;
-bad:
- return (ret);
-}
-
-/* testpkt() returns the number of received packets waiting in the queue */
-
-static int
-testpkt(int target)
-{
- int ret = -1;
-
- if (send_first(target, NUMPKTS))
- goto bad;
- ret = get_status();
-bad:
- return (ret);
-}
-
-/* inquiry() returns 0 when PAM's DMA found, -1 when timeout, -2 otherwise */
-/* Please note: The buffer is for internal use only but must be defined! */
-
-static int
-inquiry (int target, unsigned char *buffer)
-{
- int ret = -1;
- unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
- unsigned char cmd_buffer[5];
-
- if (send_first(target, INQUIRY))
- goto bad;
- setup_dma(buffer, READ, 1);
- vbuffer[8] = vbuffer[27] = 0; /* Avoid confusion with previous read data */
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
- cmd_buffer[3] = 48;
- if (send_1_5(5, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status() ||
- (calc_received(buffer) < 32))
- goto bad;
- dma_cache_maintenance((unsigned long)(buffer+8), 20, 0);
- if (memcmp(inquire8, vbuffer+8, 20))
- goto bad;
- ret = 0;
-bad:
- if (!!NET_DEBUG) {
- vbuffer[8+20]=0;
- printk("inquiry of target %d: %s\n", target, vbuffer+8);
- }
- return (ret);
-}
-
-/*
- * read_hw_addr() reads the sector containing the hwaddr and returns
- * a pointer to it (virtual address!) or 0 in case of an error
- */
-
-static HADDR
-*read_hw_addr(int target, unsigned char *buffer)
-{
- HADDR *ret = 0;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, READSECTOR))
- goto bad;
- setup_dma(buffer, READ, 1);
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
- cmd_buffer[3] = 1;
- if (send_1_5(5, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = phys_to_virt((unsigned long)&(((DMAHWADDR *)buffer)->hwaddr));
- dma_cache_maintenance((unsigned long)buffer, 512, 0);
-bad:
- return (ret);
-}
-
-static irqreturn_t
-pamsnet_intr(int irq, void *data)
-{
- return IRQ_HANDLED;
-}
-
-/* receivepkt() loads a packet to a given buffer and returns its length */
-
-static int
-receivepkt (int target, unsigned char *buffer)
-{
- int ret = -1;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, READPKT))
- goto bad;
- setup_dma(buffer, READ, 3);
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[2] = cmd_buffer[4] = 0;
- cmd_buffer[3] = 3;
- if (send_1_5(7, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = calc_received(buffer);
-bad:
- return (ret);
-}
-
-/* sendpkt() sends a packet and returns a value of zero when the packet was sent
- successfully */
-
-static int
-sendpkt (int target, unsigned char *buffer, int length)
-{
- int ret = -1;
- unsigned char cmd_buffer[5];
-
- if (send_first(target, WRITEPKT))
- goto bad;
- setup_dma(buffer, WRITE, 3);
- cmd_buffer[0] = cmd_buffer[1] = cmd_buffer[4] = 0;
- cmd_buffer[2] = length >> 8;
- cmd_buffer[3] = length & 0xFF;
- if (send_1_5(7, cmd_buffer, 1) ||
- !acsi_wait_for_IRQ(TIMEOUTDMA) ||
- get_status())
- goto bad;
- ret = 0;
-bad:
- return (ret);
-}
-
-/* The following higher level routines work on virtual addresses and convert them to
- * physical addresses when passed to the lowlevel routines. It's up to the higher level
- * routines to copy data from Alternate RAM to ST RAM if neccesary!
- */
-
-/* Check for a network adaptor of this type, and return '0' if one exists.
- */
-
-struct net_device * __init pamsnet_probe (int unit)
-{
- struct net_device *dev;
- int i;
- HADDR *hwaddr;
- int err;
-
- unsigned char station_addr[6];
- static unsigned version_printed;
- /* avoid "Probing for..." printed 4 times - the driver is supporting only one adapter now! */
- static int no_more_found;
-
- if (no_more_found)
- return ERR_PTR(-ENODEV);
- no_more_found = 1;
-
- dev = alloc_etherdev(sizeof(struct net_local));
- if (!dev)
- return ERR_PTR(-ENOMEM);
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
- SET_MODULE_OWNER(dev);
-
- printk("Probing for PAM's Net/GK Adapter...\n");
-
- /* Allocate the DMA buffer here since we need it for probing! */
-
- nic_packet = (struct nic_pkt_s *)acsi_buffer;
- phys_nic_packet = (unsigned char *)phys_acsi_buffer;
- if (pamsnet_debug > 0) {
- printk("nic_packet at 0x%p, phys at 0x%p\n",
- nic_packet, phys_nic_packet );
- }
-
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- for (i=0; i<8; i++) {
- /* Do two inquiries to cover cases with strange equipment on previous ID */
- /* blocking the ACSI bus (like the SLMC804 laser printer controller... */
- inquiry(i, phys_nic_packet);
- if (!inquiry(i, phys_nic_packet)) {
- lance_target = i;
- break;
- }
- }
-
- if (!!NET_DEBUG)
- printk("ID: %d\n",i);
-
- if (lance_target >= 0) {
- if (!(hwaddr = read_hw_addr(lance_target, phys_nic_packet)))
- lance_target = -1;
- else
- memcpy (station_addr, hwaddr, ETH_ALEN);
- }
-
- ENABLE_IRQ();
- stdma_release();
-
- if (lance_target < 0) {
- printk("No PAM's Net/GK found.\n");
- free_netdev(dev);
- return ERR_PTR(-ENODEV);
- }
-
- if (pamsnet_debug > 0 && version_printed++ == 0)
- printk(version);
-
- printk("%s: %s found on target %01d, eth-addr: %02x:%02x:%02x:%02x:%02x:%02x.\n",
- dev->name, "PAM's Net/GK", lance_target,
- station_addr[0], station_addr[1], station_addr[2],
- station_addr[3], station_addr[4], station_addr[5]);
-
- /* Initialize the device structure. */
- dev->open = pamsnet_open;
- dev->stop = pamsnet_close;
- dev->hard_start_xmit = pamsnet_send_packet;
- dev->get_stats = net_get_stats;
-
- /* Fill in the fields of the device structure with ethernet-generic
- * values. This should be in a common file instead of per-driver.
- */
-
- for (i = 0; i < ETH_ALEN; i++) {
-#if 0
- dev->broadcast[i] = 0xff;
-#endif
- dev->dev_addr[i] = station_addr[i];
- }
- err = register_netdev(dev);
- if (!err)
- return dev;
-
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
- */
-static int
-pamsnet_open(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- if (pamsnet_debug > 0)
- printk("pamsnet_open\n");
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- /* Reset the hardware here.
- */
- if (!if_up)
- start(lance_target);
- if_up = 1;
- lp->open_time = 0; /*jiffies*/
- lp->poll_time = MAX_POLL_TIME;
-
- dev->tbusy = 0;
- dev->interrupt = 0;
- dev->start = 1;
-
- ENABLE_IRQ();
- stdma_release();
- pamsnet_timer.data = (long)dev;
- pamsnet_timer.expires = jiffies + lp->poll_time;
- add_timer(&pamsnet_timer);
- return 0;
-}
-
-static int
-pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- /* Block a timer-based transmit from overlapping. This could better be
- * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
- */
- local_irq_save(flags);
-
- if (stdma_islocked()) {
- local_irq_restore(flags);
- lp->stats.tx_errors++;
- }
- else {
- int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
- unsigned long buf = virt_to_phys(skb->data);
- int stat;
-
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- local_irq_restore(flags);
- if( !STRAM_ADDR(buf+length-1) ) {
- skb_copy_from_linear_data(skb, nic_packet->buffer,
- length);
- buf = (unsigned long)phys_nic_packet;
- }
-
- dma_cache_maintenance(buf, length, 1);
-
- stat = sendpkt(lance_target, (unsigned char *)buf, length);
- ENABLE_IRQ();
- stdma_release();
-
- dev->trans_start = jiffies;
- dev->tbusy = 0;
- lp->stats.tx_packets++;
- lp->stats.tx_bytes+=length;
- }
- dev_kfree_skb(skb);
-
- return 0;
-}
-
-/* We have a good packet(s), get it/them out of the buffers.
- */
-static void
-pamsnet_poll_rx(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int boguscount;
- int pkt_len;
- struct sk_buff *skb;
- unsigned long flags;
-
- local_irq_save(flags);
- /* ++roman: Take care at locking the ST-DMA... This must be done with ints
- * off, since otherwise an int could slip in between the question and the
- * locking itself, and then we'd go to sleep... And locking itself is
- * necessary to keep the floppy_change timer from working with ST-DMA
- * registers. */
- if (stdma_islocked()) {
- local_irq_restore(flags);
- return;
- }
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
- local_irq_restore(flags);
-
- boguscount = testpkt(lance_target);
- if( lp->poll_time < MAX_POLL_TIME ) lp->poll_time++;
-
- while(boguscount--) {
- pkt_len = receivepkt(lance_target, phys_nic_packet);
-
- if( pkt_len < 60 ) break;
-
- /* Good packet... */
-
- dma_cache_maintenance((unsigned long)phys_nic_packet, pkt_len, 0);
-
- lp->poll_time = pamsnet_min_poll_time; /* fast poll */
- if( pkt_len >= 60 && pkt_len <= 2048 ) {
- if (pkt_len > 1514)
- pkt_len = 1514;
-
- /* Malloc up new buffer.
- */
- skb = alloc_skb(pkt_len, GFP_ATOMIC);
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n",
- dev->name);
- lp->stats.rx_dropped++;
- break;
- }
- skb->len = pkt_len;
- skb->dev = dev;
-
- /* 'skb->data' points to the start of sk_buff data area.
- */
- skb_copy_to_linear_data(skb, nic_packet->buffer,
- pkt_len);
- netif_rx(skb);
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes+=pkt_len;
- }
- }
-
- /* If any worth-while packets have been received, dev_rint()
- has done a mark_bh(INET_BH) for us and will work on them
- when we get to the bottom-half routine.
- */
-
- ENABLE_IRQ();
- stdma_release();
- return;
-}
-
-/* pamsnet_tick: called by pamsnet_timer. Reads packets from the adapter,
- * passes them to the higher layers and restarts the timer.
- */
-static void
-pamsnet_tick(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- struct net_local *lp = netdev_priv(dev);
-
- if( pamsnet_debug > 0 && (lp->open_time++ & 7) == 8 )
- printk("pamsnet_tick: %ld\n", lp->open_time);
-
- pamsnet_poll_rx(dev);
-
- pamsnet_timer.expires = jiffies + lp->poll_time;
- add_timer(&pamsnet_timer);
-}
-
-/* The inverse routine to pamsnet_open().
- */
-static int
-pamsnet_close(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- if (pamsnet_debug > 0)
- printk("pamsnet_close, open_time=%ld\n", lp->open_time);
- del_timer(&pamsnet_timer);
- stdma_lock(pamsnet_intr, NULL);
- DISABLE_IRQ();
-
- if (if_up)
- stop(lance_target);
- if_up = 0;
-
- lp->open_time = 0;
-
- dev->tbusy = 1;
- dev->start = 0;
-
- ENABLE_IRQ();
- stdma_release();
- return 0;
-}
-
-/* Get the current statistics.
- This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- return &lp->stats;
-}
-
-
-#ifdef MODULE
-
-static struct net_device *pam_dev;
-
-int init_module(void)
-{
- pam_dev = pamsnet_probe(-1);
- if (IS_ERR(pam_dev))
- return PTR_ERR(pam_dev);
- return 0;
-}
-
-void cleanup_module(void)
-{
- unregister_netdev(pam_dev);
- free_netdev(pam_dev);
-}
-
-#endif /* MODULE */
-
-/* Local variables:
- * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/include
- -b m68k-linuxaout -Wall -Wstrict-prototypes -O2
- -fomit-frame-pointer -pipe -DMODULE -I../../net/inet -c atari_pamsnet.c"
- * version-control: t
- * kept-new-versions: 5
- * tab-width: 8
- * End:
- */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists