[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <78C9135A3D2ECE4B8162EBDCE82CAD7701ED0874@nekter>
Date: Mon, 23 Jul 2007 02:33:32 -0400
From: "Veena Parat" <Veena.Parat@...erion.com>
To: "Veena Parat" <Veena.Parat@...erion.com>, <netdev@...r.kernel.org>,
<jeff@...zik.org>
Cc: "support" <support@...erion.com>
Subject: RE: [PATCH 2.6.22 1/4]S2IO: Removing MSI support from driver
Hi,
The patch number is incorrect in the below mail. It should be
[PATCH 2.6.22 2/4] instead of [PATCH 2.6.22 1/4].
Pls consider it as the second patch in this series.
Sorry for the inconvenience.
Regards
Veena
-----Original Message-----
From: Veena Parat [mailto:Veena.Parat@...erion.com]
Sent: Monday, July 23, 2007 11:54 AM
To: netdev@...r.kernel.org; jeff@...zik.org
Cc: support
Subject: [PATCH 2.6.22 1/4]S2IO: Removing MSI support from driver
- Removed MSI support from driver - unused feature
- Replaced request_mem_region with pci_request_regions
Signed-off-by: Veena Parat <veena.parat@...erion.com>
---
diff -urpN patch_1/drivers/net/s2io.c patch_2/drivers/net/s2io.c
--- patch_1/drivers/net/s2io.c 2007-07-19 14:20:53.000000000 +0530
+++ patch_2/drivers/net/s2io.c 2007-07-19 15:08:18.000000000 +0530
@@ -37,7 +37,7 @@
* tx_fifo_len: This too is an array of 8. Each element defines the
number of
* Tx descriptors that can be associated with each corresponding FIFO.
* intr_type: This defines the type of interrupt. The values can be
0(INTA),
- * 1(MSI), 2(MSI_X). Default value is '0(INTA)'
+ * 2(MSI_X). Default value is '0(INTA)'
* lro: Specifies whether to enable Large Receive Offload (LRO) or not.
* Possible values '1' for enable '0' for disable. Default is '0'
* lro_max_pkts: This parameter defines maximum number of packets can
be
@@ -426,7 +426,7 @@ S2IO_PARM_INT(bimodal, 0);
S2IO_PARM_INT(l3l4hdr_size, 128);
/* Frequency of Rx desc syncs expressed as power of 2 */
S2IO_PARM_INT(rxsync_frequency, 3);
-/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */
+/* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
S2IO_PARM_INT(intr_type, 0);
/* Large receive offload feature */
S2IO_PARM_INT(lro, 0);
@@ -3662,56 +3662,6 @@ static void store_xmsi_data(struct s2io_
}
}
-int s2io_enable_msi(struct s2io_nic *nic)
-{
- struct XENA_dev_config __iomem *bar0 = nic->bar0;
- u16 msi_ctrl, msg_val;
- struct config_param *config = &nic->config;
- struct net_device *dev = nic->dev;
- u64 val64, tx_mat, rx_mat;
- int i, err;
-
- val64 = readq(&bar0->pic_control);
- val64 &= ~BIT(1);
- writeq(val64, &bar0->pic_control);
-
- err = pci_enable_msi(nic->pdev);
- if (err) {
- DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n",
- nic->dev->name);
- return err;
- }
-
- /*
- * Enable MSI and use MSI-1 in stead of the standard MSI-0
- * for interrupt handling.
- */
- pci_read_config_word(nic->pdev, 0x4c, &msg_val);
- msg_val ^= 0x1;
- pci_write_config_word(nic->pdev, 0x4c, msg_val);
- pci_read_config_word(nic->pdev, 0x4c, &msg_val);
-
- pci_read_config_word(nic->pdev, 0x42, &msi_ctrl);
- msi_ctrl |= 0x10;
- pci_write_config_word(nic->pdev, 0x42, msi_ctrl);
-
- /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */
- tx_mat = readq(&bar0->tx_mat0_n[0]);
- for (i=0; i<config->tx_fifo_num; i++) {
- tx_mat |= TX_MAT_SET(i, 1);
- }
- writeq(tx_mat, &bar0->tx_mat0_n[0]);
-
- rx_mat = readq(&bar0->rx_mat);
- for (i=0; i<config->rx_ring_num; i++) {
- rx_mat |= RX_MAT_SET(i, 1);
- }
- writeq(rx_mat, &bar0->rx_mat);
-
- dev->irq = nic->pdev->irq;
- return 0;
-}
-
static int s2io_enable_msi_x(struct s2io_nic *nic)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
@@ -4117,39 +4067,6 @@ static int s2io_chk_rx_buffers(struct s2
return 0;
}
-static irqreturn_t s2io_msi_handle(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct s2io_nic *sp = dev->priv;
- int i;
- struct mac_info *mac_control;
- struct config_param *config;
-
- atomic_inc(&sp->isr_cnt);
- mac_control = &sp->mac_control;
- config = &sp->config;
- DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__);
-
- /* If Intr is because of Rx Traffic */
- for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i]);
-
- /* If Intr is because of Tx Traffic */
- for (i = 0; i < config->tx_fifo_num; i++)
- tx_intr_handler(&mac_control->fifos[i]);
-
- /*
- * If the Rx buffer count is below the panic threshold then
- * reallocate the buffers from the interrupt handler itself,
- * else schedule a tasklet to reallocate the buffers.
- */
- for (i = 0; i < config->rx_ring_num; i++)
- s2io_chk_rx_buffers(sp, i);
-
- atomic_dec(&sp->isr_cnt);
- return IRQ_HANDLED;
-}
-
static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
{
struct ring_info *ring = (struct ring_info *)dev_id;
@@ -6332,9 +6249,7 @@ static int s2io_add_isr(struct s2io_nic
struct net_device *dev = sp->dev;
int err = 0;
- if (sp->intr_type == MSI)
- ret = s2io_enable_msi(sp);
- else if (sp->intr_type == MSI_X)
+ if (sp->intr_type == MSI_X)
ret = s2io_enable_msi_x(sp);
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n",
dev->name);
@@ -6345,16 +6260,6 @@ static int s2io_add_isr(struct s2io_nic
store_xmsi_data(sp);
/* After proper initialization of H/W, register ISR */
- if (sp->intr_type == MSI) {
- err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
- IRQF_SHARED, sp->name, dev);
- if (err) {
- pci_disable_msi(sp->pdev);
- DBG_PRINT(ERR_DBG, "%s: MSI registration
failed\n",
- dev->name);
- return -1;
- }
- }
if (sp->intr_type == MSI_X) {
int i, msix_tx_cnt=0,msix_rx_cnt=0;
@@ -6441,14 +6346,6 @@ static void s2io_rem_isr(struct s2io_nic
pci_disable_msix(sp->pdev);
} else {
free_irq(sp->pdev->irq, dev);
- if (sp->intr_type == MSI) {
- u16 val;
-
- pci_disable_msi(sp->pdev);
- pci_read_config_word(sp->pdev, 0x4c, &val);
- val ^= 0x1;
- pci_write_config_word(sp->pdev, 0x4c, val);
- }
}
/* Waiting till all Interrupt handlers are complete */
cnt = 0;
@@ -6994,7 +6891,7 @@ static int s2io_verify_parm(struct pci_d
*dev_intr_type = INTA;
}
#else
- if (*dev_intr_type > MSI_X) {
+ if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
"Defaulting to INTA\n");
*dev_intr_type = INTA;
@@ -7103,28 +7000,10 @@ s2io_init_nic(struct pci_dev *pdev, cons
pci_disable_device(pdev);
return -ENOMEM;
}
- if (dev_intr_type != MSI_X) {
- if (pci_request_regions(pdev, s2io_driver_name)) {
- DBG_PRINT(ERR_DBG, "Request Regions failed\n");
- pci_disable_device(pdev);
- return -ENODEV;
- }
- }
- else {
- if (!(request_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0),
s2io_driver_name))) {
- DBG_PRINT(ERR_DBG, "bar0 Request Regions
failed\n");
- pci_disable_device(pdev);
- return -ENODEV;
- }
- if (!(request_mem_region(pci_resource_start(pdev, 2),
- pci_resource_len(pdev, 2),
s2io_driver_name))) {
- DBG_PRINT(ERR_DBG, "bar1 Request Regions
failed\n");
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- pci_disable_device(pdev);
- return -ENODEV;
- }
+ if ((ret = pci_request_regions(pdev, s2io_driver_name))) {
+ DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x \n",
__FUNCTION__, ret);
+ pci_disable_device(pdev);
+ return -ENODEV;
}
dev = alloc_etherdev(sizeof(struct s2io_nic));
@@ -7434,9 +7313,6 @@ s2io_init_nic(struct pci_dev *pdev, cons
case INTA:
DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n",
dev->name);
break;
- case MSI:
- DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI\n",
dev->name);
- break;
case MSI_X:
DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n",
dev->name);
break;
@@ -7476,14 +7352,7 @@ s2io_init_nic(struct pci_dev *pdev, cons
mem_alloc_failed:
free_shared_mem(sp);
pci_disable_device(pdev);
- if (dev_intr_type != MSI_X)
- pci_release_regions(pdev);
- else {
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- release_mem_region(pci_resource_start(pdev, 2),
- pci_resource_len(pdev, 2));
- }
+ pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
@@ -7518,14 +7387,7 @@ static void __devexit s2io_rem_nic(struc
free_shared_mem(sp);
iounmap(sp->bar0);
iounmap(sp->bar1);
- if (sp->intr_type != MSI_X)
- pci_release_regions(pdev);
- else {
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- release_mem_region(pci_resource_start(pdev, 2),
- pci_resource_len(pdev, 2));
- }
+ pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
pci_disable_device(pdev);
diff -urpN patch_1/drivers/net/s2io.h patch_2/drivers/net/s2io.h
--- patch_1/drivers/net/s2io.h 2007-07-19 14:20:53.000000000 +0530
+++ patch_2/drivers/net/s2io.h 2007-07-19 14:43:39.000000000 +0530
@@ -875,7 +875,6 @@ struct s2io_nic {
u16 lro_max_aggr_per_sess;
#define INTA 0
-#define MSI 1
#define MSI_X 2
u8 intr_type;
@@ -1019,8 +1018,6 @@ static int s2io_poll(struct net_device *
static void s2io_init_pci(struct s2io_nic * sp);
static int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
static void s2io_alarm_handle(unsigned long data);
-static int s2io_enable_msi(struct s2io_nic *nic);
-static irqreturn_t s2io_msi_handle(int irq, void *dev_id);
static irqreturn_t
s2io_msix_ring_handle(int irq, void *dev_id);
static irqreturn_t
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists