[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <46A63576.5050908@hp.com>
Date: Tue, 24 Jul 2007 10:23:02 -0700
From: Rick Jones <rick.jones2@...com>
To: Linux Network Development list <netdev@...r.kernel.org>
Cc: Bill Fink <billfink@...dspring.com>
Subject: Re: specifying scopid's for link-local IPv6 addrs
>> You must explicitly specify the desired interface. For example,
>> on my test system, the correct interface is eth6 which is interface 8
>> (lo eth0 eth1 eth2 ... eth5 eth6). Here is an example nuttcp test
>> specifying interface 8:
>>
>> chance% nuttcp -P5100 fe80::202:b3ff:fed4:cd1%8
>> 1178.5809 MB / 10.02 sec = 986.2728 Mbps 12 %TX 15 %RX
>>
>> nuttcp uses getaddrinfo() which parses the "%<ifindex>" field,
>> and then copies the sin6_scope_id from the res structure to the
>> server's sockaddr_in6 structure before initiating the connect().
>
>
> OK, I'll give that a quick try with netperf:
>
> [root@...pc106 ~]# netperf -H 192.168.2.107 -c -C -i 30,3 -- -s 1M -S 1M
> -m 64K -H fe80::207:43ff:fe05:9d%2
> TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to
> fe80::207:43ff:fe05:9d%2 (fe80::207:43ff:fe05:9d) port 0 AF_INET6 :
> +/-2.5% @ 99% conf.
>
> Cool - it establishes the data connection just fine.
Well, I spoke too soon - while it got me past my EINVAL, the connection
establishement timed-out. Either I picked the wrong value for n, or I may yet
need to make some tweaks to netperf.
rick jones
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists